Modular, multi-robot integration of laboratories: an autonomous workflow for solid-state chemistry.

Automation can transform productivity in research activities that use liquid handling, such as organic synthesis, but it has made less impact in materials laboratories, which require sample preparation steps and a range of solid-state characterization techniques. For example, powder X-ray diffraction (PXRD) is a key method in materials and pharmaceutical chemistry, but its end-to-end automation is challenging because it involves solid powder handling and sample processing. Here we present a fully autonomous solid-state workflow for PXRD experiments that can match or even surpass manual data quality, encompassing crystal growth, sample preparation, and automated data capture. The workflow involves 12 steps performed by a team of three multipurpose robots, illustrating the power of flexible, modular automation to integrate complex, multitask laboratories.

Mapping short-range order at the nanoscale in metal-organic framework and inorganic glass composites.

Characterization of nanoscale changes in the atomic structure of amorphous materials is a profound challenge. Established X-ray and neutron total scattering methods typically provide sufficient signal quality only over macroscopic volumes. Pair distribution function analysis using electron scattering (ePDF) in the scanning transmission electron microscope (STEM) has emerged as a method of probing nanovolumes of these materials, but inorganic glasses as well as metal-organic frameworks (MOFs) and many other materials containing organic components are characteristically prone to irreversible changes after limited electron beam exposures. This beam sensitivity requires 'low-dose' data acquisition to probe inorganic glasses, amorphous and glassy MOFs, and MOF composites. Here, we use STEM-ePDF applied at low electron fluences (10 e- Å-2) combined with unsupervised machine learning methods to map changes in the short-range order with ca. 5 nm spatial resolution in a composite material consisting of a zeolitic imidazolate framework glass agZIF-62 and a 0.67([Na2O]0.9[P2O5])-0.33([AlO3/2][AlF3]1.5) inorganic glass. STEM-ePDF enables separation of MOF and inorganic glass domains from atomic structure differences alone, showing abrupt changes in atomic structure at interfaces with interatomic correlation distances seen in X-ray PDF preserved at the nanoscale. These findings underline that the average bulk amorphous structure is retained at the nanoscale in the growing family of MOF glasses and composites, a previously untested assumption in PDF analyses crucial for future non-crystalline nanostructure engineering.

The reactivity of an inorganic glass melt with ZIF-8.

The thermal behaviour of ZIF-8, Zn(meIm)2 in the presence of a sodium fluoroaluminophosphate glass melt was probed through differential scanning calorimetry and thermogravimetric analysis. The structural integrity of ZIF-8 was then determined by a combination of powder X-ray diffraction, Fourier transform infra-red and 1H nuclear magnetic resonance spectroscopy.

Structural integrity, meltability, and variability of thermal properties in the mixed-linker zeolitic imidazolate framework ZIF-62.

Metal-organic framework (MOF) glasses have emerged as a new class of melt-quenched glasses; however, so far, all MOF glass production has remained at lab-scale; future applications will require large-scale, commercial production of parent crystalline MOFs. Yet, control of synthetic parameters, such as uniform temperature and mixing, can be challenging, particularly, when scaling-up production of a mixed-linker MOF or a zeolitic imidazolate framework (ZIF). Here, we examine the effect of heterogeneous linker distribution on the thermal properties and melting behavior of ZIF-62. X-ray diffraction (XRD), Raman, and 1H nuclear magnetic resonance spectroscopies revealed little discernable structural difference between samples of ZIF-62 synthesized in our lab and by a commercial supplier. Differential scanning calorimetry and variable temperature/isothermal XRD revealed the samples to have significantly different thermal behavior. Formation of ZIF-zni was identified, which contributed to a dramatic rise in the melting point by around 100 K and also led to the alteration of the macroscopic properties of the final glass. Parameters that might lead to the formation of unexpected phases such as an uneven distribution of linkers were identified, and characterization methods for the detection of unwanted phases are provided. Finally, the need for adequate consideration of linker distribution is stressed when characterizing mixed-linker ZIFs.

Metal-organic framework and inorganic glass composites.

Metal-organic framework (MOF) glasses have become a subject of interest as a distinct category of melt quenched glass, and have potential applications in areas such as ion transport and sensing. In this paper we show how MOF glasses can be combined with inorganic glasses in order to fabricate a new family of materials composed of both MOF and inorganic glass domains. We use an array of experimental techniques to propose the bonding between inorganic and MOF domains, and show that the composites produced are more mechanically pliant than the inorganic glass itself.

Coordination cages as permanently porous ionic liquids.

Porous materials are widely used in industry for applications that include chemical separations and gas scrubbing. These materials are typically porous solids, although the liquid state can be easier to manipulate in industrial settings. The idea of combining the size and shape selectivity of porous domains with the fluidity of liquids is a promising one and porous liquids composed of functionalized organic cages have recently attracted attention. Here we describe an ionic-liquid, porous, tetrahedral coordination cage. Complementing the gas binding observed in other porous liquids, this material also encapsulates non-gaseous guests-shape and size selectivity was observed for a series of isomeric alcohols. Three gaseous chlorofluorocarbon guests, trichlorofluoromethane, dichlorodifluoromethane and chlorotrifluoromethane, were also shown to be taken up by the liquid coordination cage with an affinity that increased with their size. We hope that these findings will lead to the synthesis of other porous liquids whose guest-uptake properties may be tailored to fulfil specific functions.

Metal-organic framework crystal-glass composites.

The majority of research into metal-organic frameworks (MOFs) focuses on their crystalline nature. Recent research has revealed solid-liquid transitions within the family, which we use here to create a class of functional, stable and porous composite materials. Described herein is the design, synthesis, and characterisation of MOF crystal-glass composites, formed by dispersing crystalline MOFs within a MOF-glass matrix. The coordinative bonding and chemical structure of a MIL-53 crystalline phase are preserved within the ZIF-62 glass matrix. Whilst separated phases, the interfacial interactions between the closely contacted microdomains improve the mechanical properties of the composite glass. More significantly, the high temperature open pore phase of MIL-53, which spontaneously transforms to a narrow pore upon cooling in the presence of water, is stabilised at room temperature in the crystal-glass composite. This leads to a significant improvement of CO2 adsorption capacity.

Novel metal-organic framework materials: blends, liquids, glasses and crystal-glass composites.

Metal-organic frameworks (MOFs) are often, and incorrectly, believed to be purely crystalline solids. This Feature Article highlights a selection of highly disordered MOF-based materials. This disorder gives rise to numerous possibilities in the fabrication of new MOF materials, and presents an alternative method of novel materials discovery, outside of the synthesis of increasingly complex crystalline structures. The formation of liquid MOFs and resultant melt-quenched glasses is reviewed, along with several categories of novel MOF-based materials including blends, flux melted glasses and crystal-glass composites.

Flux melting of metal-organic frameworks.

Recent demonstrations of melting in the metal-organic framework (MOF) family have created interest in the interfacial domain between inorganic glasses and amorphous organic polymers. The chemical and physical behaviour of porous hybrid liquids and glasses is of particular interest, though opportunities are limited by the inaccessible melting temperatures of many MOFs. Here, we show that the processing technique of flux melting, 'borrowed' from the inorganic domain, may be applied in order to melt ZIF-8, a material which does not possess an accessible liquid state in the pure form. Effectively, we employ the high-temperature liquid state of one MOF as a solvent for a secondary, non-melting MOF component. Differential scanning calorimetry, small- and wide-angle X-ray scattering, electron microscopy and X-ray total scattering techniques are used to show the flux melting of the crystalline component within the liquid. Gas adsorption and positron annihilation lifetime spectroscopy measurements show that this results in enhanced, accessible porosity to a range of guest molecules in the resultant flux melted MOF glass.

Structural evolution in a melt-quenched zeolitic imidazolate framework glass during heat-treatment.

A pronounced enthalpy release occurs around 1.38Tg in the prototypical metal-organic framework glass formed from ZIF-4 [Zn(C3H3N2)2], but there is no sign for any crystallization (i.e., long-range ordering) taking place. The enthalpy release peak is attributed to pore collapse and structural densification.

Mechanical Properties and Processing Techniques of Bulk Metal-Organic Framework Glasses.

Melt quenched metal-organic framework (MOF) glasses define a new category of glass, distinct from metallic, organic, and inorganic glasses, owing to the dominant role of metal-ligand coordination bonding. The mechanical properties of glasses in general are important given their application in protective coatings and display technologies, though little is known about MOF glasses in this respect. The experimental elucidation of key properties such as their scratch resistance has been limited by the lack of processing methodologies capable of producing bulk glass samples. Here, nanoindentation was used to investigate the Young's modulus and hardness of four melt-quenched glasses formed from zeolitic imidazolate frameworks (ZIF): agZIF-4, agZIF-62, agZIF-76, and agZIF-76-mbIm. The creep resistance of the melt-quenched glasses was studied via strain-rate jump (SRJ) tests and through constant load and hold (CLH) indentation creep experiments. Values for the strain-rate sensitivity were found to be close to those for other glassy polymers and Se-rich GeSe chalcogenide glasses. Vacuum hot-pressing of agZIF-62 resulted in an inhomogeneous bulk sample containing the glass and amorphous non-melt-quenched aZIF-62. Remelting and annealing, however, resulted in the fabrication of a transparent, bubble-free bulk specimen, which allowed the first scratch testing experiments to be performed on an MOF glass.

Subwavelength Spatially Resolved Coordination Chemistry of Metal-Organic Framework Glass Blends.

Microstructured metal-organic framework (MOF) glasses have been produced by combining two amorphous MOFs. However, the electronic structure of these materials has not been interrogated at the length scales of the chemical domains formed in these glasses. Here, we report a subwavelength spatially resolved physicochemical analysis of the electronic states at visible and UV energies in a blend of two zeolitic imidazolate frameworks (ZIFs), ZIF-4-Co and ZIF-62-Zn. By combining spectroscopy at visible and UV energies as well as at core ionization energies in electron energy loss spectroscopy in the scanning transmission electron microscope with density functional theory calculations, we show that domains less than 200 nm in size retain the electronic structure of the precursor crystalline ZIF phases. Prototypical signatures of coordination chemistry including d- d transitions in ZIF-4-Co are assigned and mapped with nanoscale precision.

Metal-organic framework glasses with permanent accessible porosity.

To date, only several microporous, and even fewer nanoporous, glasses have been produced, always via post synthesis acid treatment of phase separated dense materials, e.g. Vycor glass. In contrast, high internal surface areas are readily achieved in crystalline materials, such as metal-organic frameworks (MOFs). It has recently been discovered that a new family of melt quenched glasses can be produced from MOFs, though they have thus far lacked the accessible and intrinsic porosity of their crystalline precursors. Here, we report the first glasses that are permanently and reversibly porous toward incoming gases, without post-synthetic treatment. We characterize the structure of these glasses using a range of experimental techniques, and demonstrate pores in the range of 4 - 8 Å. The discovery of MOF glasses with permanent accessible porosity reveals a new category of porous glass materials that are elevated beyond conventional inorganic and organic porous glasses by their diversity and tunability.

Publisher Correction: Liquid phase blending of metal-organic frameworks.

The original version of this Article contained an error in Figure 1b, where the blue '(ZIF-4-Zn)0.5 (ZIF-62)0.5 blend' data curve was omitted from the enthalpy response plot. This has now been corrected in both the PDF and HTML versions of the Article.

Thermodynamic features and enthalpy relaxation in a metal-organic framework glass.

In this work, we explore the thermodynamic evolution in a melt-quenched metal-organic framework glass, formed from ZIF-62 upon heating to the melting point (Tm), and subsequent enthalpy relaxation. The temperature dependence of the difference in Gibbs free energy between the liquid and crystal states of ZIF-62 in the temperature range from the glass transition temperature (Tg) to Tm is found to be weaker than those of other types of glasses, e.g., metallic glasses. Additionally, we find that the stretched exponent of the enthalpy relaxation function in the glass varies significantly (ß = 0.44-0.76) upon changing the extent of sub-Tg annealing, compared to metallic and oxide glasses with similar Tgs, suggesting a high degree of structural heterogeneity. Pair distribution function results suggest no significant structural changes during the sub-Tg relaxation in ZIF-62 glass.

Liquid phase blending of metal-organic frameworks.

The liquid and glass states of metal-organic frameworks (MOFs) have recently become of interest due to the potential for liquid-phase separations and ion transport, alongside the fundamental nature of the latter as a new, fourth category of melt-quenched glass. Here we show that the MOF liquid state can be blended with another MOF component, resulting in a domain structured MOF glass with a single, tailorable glass transition. Intra-domain connectivity and short range order is confirmed by nuclear magnetic resonance spectroscopy and pair distribution function measurements. The interfacial binding between MOF domains in the glass state is evidenced by electron tomography, and the relationship between domain size and Tg investigated. Nanoindentation experiments are also performed to place this new class of MOF materials into context with organic blends and inorganic alloys.