Migration of Condensed Aromatic Hydrocarbons During Alkyne-Vinylidene Rearrangements.

Diarylacetylenes ArCºCAr featuring condensed aromatic hydrocarbon fragments (Ar) such as naphthalene, anthracene, phenanthrene and pyrene were converted into vinylidene ligands by 1,2-migration reactions within the coordination sphere of half-sandwich complexes [MII(dppe)Cp]+ (MII = RuII, FeII). Comparison of the extent of conversion of the alkyne substrates to the vinylidene complexes [Ru{=C=CAr2}(dppe)Cp]+ with those obtained from acetylenes functionalized by smaller groups (H, CH3, Ph) show that the molecular volume (VM) of the migrating group and relief of steric congestion plays a role during the rearrangement process. Conversely, the H-atoms from the larger condensed ring aryl groups that are in close proximity to the migrating sites also have a significant influence on the efficacy and extent of the reaction by restricting access of the alkyne to the metal center, resulting in a less effective migration reaction. This combination of competing steric factors (acceleration due to relief of steric congestion and restricted access of the alkyne moiety to the reaction site) is exemplified by the facile migration of 1-pyryl entities and the low yields of vinylidene products formed from 1,2-bis(9-anthryl)acetylene.

Large area arrays of discrete single-molecule junctions derived from host-guest complexes.

The desire to continually reduce the lower limits of semiconductor integrated circuit (IC) fabrication methods continues to inspire interest in unimolecular electronics as a platform technology for the realization of future (opto)electronic devices. However, despite successes in developing methods for the construction and measurement of single-molecule and large-area molecular junctions, exercising control over the precise junction geometry remains a significant challenge. Here, host-guest complexes of the wire-like viologen derivative 1,1'-bis(4-(methylthio)-phenyl)-[4,4'-bipyridine]-1,1'-diium chloride ([1][Cl]2) and cucurbit[7]uril (CB[7]) have been self-assembled in a regular pattern over a gold substrate. Subsequently, ligandless gold nanoparticles (AuNPs) synthesized in situ are deposited over the host-guest array. The agreement between the conductance of individual mono-molecular junctions, appropriately chosen as a function of the AuNP diameter, within this array determined by conductive probe atomic force microscope (c-AFM) and true single-molecule measurements for a closely similar host-guest complex within a scanning tunneling microscope break-junction (STM-BJ) indicates the formation of molecular junctions derived from these host-guest complexes without deleterious intermolecular coupling effects.

Destructive quantum interference in meta-oligo(phenyleneethynylene) molecular wires with gold-graphene heterojunctions.

Quantum interference (QI) is well recognised as a significant contributing factor to the magnitude of molecular conductance values in both single-molecule and large area junctions. Numerous structure-property relationship studies have shown that para-connected oligo(phenyleneethynylene) (OPE) based molecular wires exemplify the impact of constructive quantum interference (CQI), whilst destructive quantum interference (DQI) effects are responsible for the orders of magnitude lower conductance of analogous meta-contacted OPE derivatives, despite the somewhat shorter effective tunnelling distance. Since molecular conductance is related to the value of the transmission function, evaluated at the electrode Fermi energy, T(EF), which in turn is influenced by the presence and relative energy of (anti)resonances, it follows that the relative single-molecule conductance of para- and meta-contacted OPE-type molecules is tuned both by the anchor group and the nature of the electrode materials used in the construction of molecular junctions (gold|molecule|gold vs. gold|molecule|graphene). It is shown here that whilst amine-contacted junctions show little influence of the electrode material on molecular conductance due to the similar electrode-molecule coupling through this anchor group to both types of electrodes, the weaker coupling between thiomethyl and ethynyl anchors and the graphene substrate electrode results in a relative enhancement of the DQI effect. This work highlights an additional parameter space to explore QI effects and establishes a new working model based on the electrode materials and anchor groups in modulating QI effects beyond the chemical structure of the molecular backbone.

Advances in single-molecule junctions as tools for chemical and biochemical analysis.

The development of miniaturized electronics has led to the design and construction of powerful experimental platforms capable of measuring electronic properties to the level of single molecules, along with new theoretical concepts to aid in the interpretation of the data. A new area of activity is now emerging concerned with repurposing the tools of molecular electronics for applications in chemical and biological analysis. Single-molecule junction techniques, such as the scanning tunnelling microscope break junction and related single-molecule circuit approaches have a remarkable capacity to transduce chemical information from individual molecules, sampled in real time, to electrical signals. In this Review, we discuss single-molecule junction approaches as emerging analytical tools for the chemical and biological sciences. We demonstrate how these analytical techniques are being extended to systems capable of probing chemical reaction mechanisms. We also examine how molecular junctions enable the detection of RNA, DNA, and traces of proteins in solution with limits of detection at the zeptomole level.

Potential-Modulated Ion Distributions in the Back-to-Back Electrical Double Layers at a Polarised Liquid|Liquid Interface Regulate the Kinetics of Interfacial Electron Transfer.

Biphasic interfacial electron transfer (IET) reactions at polarisable liquid|liquid (L|L) interfaces underpin new approaches to electrosynthesis, redox electrocatalysis, bioelectrochemistry and artificial photosynthesis. Herein, using cyclic and alternating current voltammetry, we demonstrate that under certain experimental conditions, the biphasic 2-electron O2 reduction reaction can proceed by single-step IET between a reductant in the organic phase, decamethylferrocene, and interfacial protons in the presence of O2. Using this biphasic system, we demonstrate that the applied interfacial Galvani potential difference Δ o w φ provides no direct driving force to realise a thermodynamically uphill biphasic IET reaction in the mixed solvent region. We show that the onset potential for a biphasic single-step IET reaction does not correlate with the thermodynamically predicted standard Galvani IET potential and is instead closely correlated with the potential of zero charge at a polarised L|L interface. We outline that the applied Δ o w φ required to modulate the interfacial ion distributions, and thus kinetics of IET, must be optimised to ensure that the aqueous and organic redox species are present in substantial concentrations at the L|L interface simultaneously in order to react.

Exploring relationships between chemical structure and molecular conductance: from α,ω-functionalised oligoynes to molecular circuits.

The quantum circuit rule (QCR) allows estimation of the conductance of molecular junctions, electrode|X-bridge-Y|electrode, by considering the molecule as a series of independent scattering regions associated with the anchor groups (X, Y) and bridge, provided the numerical parameters that characterise the anchor groups (aX, aY) and molecular backbones (bB) are known. Single-molecule conductance measurements made with a series of α,ω-substituted oligoynes (X-{(CC)N}-X, N = 1, 2, 3, 4), functionalised by terminal groups, X (4-thioanisole (C6H4SMe), 5-(3,3-dimethyl-2,3-dihydrobenzo[b]thiophene) (DMBT), 4-aniline (C6H4NH2), 4-pyridine (Py), capable of serving as 'anchor groups' to contact the oligoyne fragment within a molecular junction, have shown the expected exponential dependence of molecular conductance, G, with the number of alkyne repeating units. In turn, this allows estimation of the anchor (ai) and backbone (bi) parameters. Using these values, together with previously determined parameters for other molecular fragments, the QCR is found to accurately estimate the junction conductance of more complex molecular circuits formed from smaller components assembled in series.

Excited State Mixed-Valence Complexes: From the Special Pair to the Creutz-Taube Ion and Beyond.

Compounds and complexes with mixed-valence electronic ground states, such as the Creutz-Taube ion, have proven to be excellent vehicles through which to study intramolecular electron-transfer processes. In a recent contribution by Cadranel and co-workers, time-resolved pump-probe spectroscopy reveals photo-induced metal-to-bridge charge transfer within the homovalent analogue of the Creutz-Taube ion, [{(NH3 )5 Ru}(µ-pz){Ru(NH3 )5 }]4+ , giving rise to two closely lying excited states with mixed-valence character, one with a shorter lifetime (τ=136 ps) and weakly-coupled (Robin-Day Class II) character, the other a longer-lived (τ=2.8 ns) configurational isomer with more delocalized electronic structure. Electron transfer reactions from the longer-lived species demonstrate analogies with the photo-induced reactions of the photosynthetic special pair, suggesting this state as a reference system for excited state mixed-valency, and a framework from which to explore photocatalytic reactions.

Multifunctional switching properties of "wire-like" dinuclear ruthenium bis-alkynyl spiropyran complexes.

Multifunctional switches are crucial to the development of smart molecular materials and molecular-electronic applications. Here, we describe the synthesis, structure, and characterization of several spiropyrans functionalized with alkynyl-[Ru(dppe)2] moieties. Through electrochemical and spectroelectrochemical studies, we demonstrate access to several stable redox states, in addition to states accessed via acidochromism and photoisomerisation. Initial protonation was found to occur at the alkynyl functionality followed by acid-induced ring-opening of the spiropyran ligand to form the protonated merocyanine. The protonated merocyanine can be switched from the Z- to E-isomer by using ultraviolet light. The spiropyran was also shown to be an effective insulator for electronic communication across the molecular backbone.

Modulation of Charge Distribution in Cobalt-α-Diimine Complexes toward Valence Tautomerism.

Valence tautomerism (VT) and spin crossover (SCO) are promising avenues for developing a range of molecular materials for sensing, memory, and optoelectronic applications. However, these phenomena arise only when specific metal-ligand combinations are employed. The underexplored combination of cobalt(II/III) paired with bis((aryl)imino)acenapthene (Ar-BIAN) ligands, which can exist as neutral Ar-BIAN0 (L0), monoanionic radical Ar-BIAN•- (L•-), and dianionic Ar-BIAN2- (L2-) forms, has potential to afford both VT and SCO. Aiming to develop a new family of switchable molecules, we systematically explored a dual-tuning approach by varying the redox state and aryl substituents in a series of homoleptic [Co(Ar-BIAN)3]n+ complexes (Ar = Ph, n = 2 (12+), 1 (1+), 0 (1); Ar = 3,5-CF3-Ph, n = 0 (2); Ar = 4-MeO-Ph, n = 2 (32+), 0 (3)). As a prelude to synthetic and experimental studies, density functional theory (DFT) calculations were used to explore the structure and relative energies of the different electronic forms of each complex, comprising different cobalt oxidation and spin states and different ligand oxidation states. Except for compound 3, DFT identified a HS-CoII-L0 containing ground state for all complexes, precluding thermally induced SCO or VT. For 3, calculations suggested a possible thermally accessible LS-CoIII-(L•-)3 ⇌ HS-CoII-(L•-)2(L0) VT interconversion. Experimentally, structural and magnetic data reveal a HS-CoII-L0 containing ground state for all six compounds in the solid state, including 3, discounting thermally induced VT or SCO. In solution, electrochemical and spectroscopic analysis also indicate that all compounds exist as the HS-CoII-L0-containing electromer at 298 K. Intervalence charge transfer (IVCT) bands observed for neutral 1, 2, and 3 at room temperature suggest the mixed-valence HS-CoII-(L•-)2(L0) charge distribution. However, cooling 3 to 243 K in acetonitrile uniquely affords a substantial reduction in the intensity of this IVCT band, consistent with thermally induced VT interconversion to the LS-CoIII-(L•-)3 ground state as predicted by DFT calculations. This study emphasizes the utility of computationally guided molecular design for complicated systems with redox activity at the metal and multiple ligands, thus opening new avenues for tuning electronic structure and developing new families of switchable molecules.

Quantum Interference in Mixed-Valence Complexes: Tuning Electronic Coupling Through Substituent Effects.

Whilst 2- or 5-OMe groups on the bridging phenylene ring in [{Cp*(dppe)RuC≡C}2 (µ-1,3-C6 H4 )]+ have little influence on the electronic structure of this weakly coupled mixed-valence complex, a 4-OMe substituent enhances ground state electron delocalization, and increases the intensity of the IVCT transition. Vibrational frequency and TDDFT calculations (LH20t-D3(BJ), def2-SVP, COSMO (CH2 Cl2 )) on ([{Cp*(dppe)RuC≡C}2 (µ-1,3-C6 H3 -n-OMe)]+ (n=2, 4, 5) models are in excellent agreement with the experimental results. The stronger ground state coupling is attributed to the change in composition of the ß-HOSO brought about by the 4-OMe group, which is ortho or para to each of the metal fragments. The intensity of the IVCT transition increases with the greater overlap of the ß-HOSO and ß-LUSO, whilst the relative phases of the ß-HOSO and ß-LUSO in the 4-OMe substituted complex are consistent with predictions of constructive quantum interference from molecular circuit rules.

The Use of Bridging Ligand Substituents to Bias the Population of Localized and Delocalized Mixed-Valence Conformers in Solution.

The electronic structure and associated spectroscopic properties of ligand-bridged, bimetallic 'mixed-valence' complexes of the general form {M}(µ-B){M+ } are dictated by the electronic couplings, and hence orbital overlaps, between the metal centers mediated by the bridge. In the case of complexes such as [{Cp*(dppe)Ru}(µ-C≡CC6 H4 C≡C){Ru(dppe)Cp*}]+ , the low barrier to rotation of the half-sandwich metal fragments and the arylene bridge around the acetylene moieties results in population of many energy minima across the conformational energy landscape. Since orbital overlap is also sensitive to the particular mutual orientations of the metal fragment(s) and arylene bridge through a Karplus-like relationship, the different members of the population range exemplify electronic structures ranging from strongly localized (weakly coupled Robin-Day Class II) to completely delocalized (Robin-Day Class III). Here, we use electronic structure calculations with the hybrid density functional BLYP35-D3 and a continuum solvent model in combination with UV-vis-NIR and IR spectroelectrochemical studies to show that the conformational population in complexes [{Cp*(dppe)Ru}(µ-C≡CArC≡C){Ru(dppe)Cp*]+ , and hence the dominant electronic structure, can be biased through the steric and electronic properties of the diethynylarylene (Ar) moiety (Ar=1,4-C6 H4 , 1,4-C6 F4 , 1,4-C6 H2 -2,5-Me2 , 1,4-C6 H2 -2,5-(CF3 )2 , 1,4-C6 H2 -2,5-i Pr2 ).

Redox-Addressable Single-Molecule Junctions Incorporating a Persistent Organic Radical.

Integrating radical (open-shell) species into non-cryogenic nanodevices is key to unlocking the potential of molecular electronics. While many efforts have been devoted to this issue, in the absence of a chemical/electrochemical potential the open-shell character is generally lost in contact with the metallic electrodes. Herein, single-molecule devices incorporating a 6-oxo-verdazyl persistent radical have been fabricated using break-junction techniques. The open-shell character is retained at room temperature, and electrochemical gating permits in situ reduction to a closed-shell anionic state in a single-molecule transistor configuration. Furthermore, electronically driven rectification arises from bias-dependent alignment of the open-shell resonances. The integration of radical character, transistor-like switching, and rectification in a single molecular component paves the way to further studies of the electronic, magnetic, and thermoelectric properties of open-shell species.

From ferrocene to 1,2,3,4,5-pentafluoroferrocene: halogen effect on the properties of metallocene.

The sequentially fluorinated ferrocenes (1-, 1,2-di, 1,2,3-tri, 1,2,3,4-tetra and 1,2,3,4,5-pentafluoroferrocene) have been synthesized from ferrocene. Rather than a 'perfluoro' effect, experimental and computational analysis of the complete series robustly demonstrates a linear additive effect of fluorine on the electrochemical and spectroscopic properties of ferrocene.

Syntheses and Structures of trans-bis(Alkenylacetylide) Ruthenium Complexes.

A series of ruthenium alkenylacetylide complexes trans-[Ru{C≡CC(=CH2 )R}Cl(dppe)2 ] (R=Ph (1 a), c C4 H3 S (1 b), 4-MeS-C6 H4 (1 c), 3,3-dimethyl-2,3-dihydrobenzo[b]thiophene (DMBT) (1 d)) or trans-[Ru{C≡C-c C6 H9 }Cl(dppe)2 ] (1 e) were allowed to react with the corresponding propargylic alcohol HC≡CC(Me)R(OH) (R=Ph (A), c C4 H3 S (B), 4-MeS-C6 H4 (C), DMBT (D) or HC≡C-c C6 H10 (OH) (E) in the presence of TlBF4 and DBU to presumably give alkenylacetylide/allenylidene intermediates trans-[Ru{C≡CC(=CH2 )R}{C=C=C(Me)}(dppe)2 ]PF6 ([2]PF6 ). These complexes were not isolated but deprotonated to give the isolable bis(alkenylacetylide) complexes trans-[Ru{C≡CC(=CH2 )R}2 (dppe)2 ] (R=Ph (3 a), c C4 H3 S (3 b), 4-MeS-C6 H4 (3 c), DMBT (3 d)) and trans-[Ru{C≡C-c C6 H9 }2 (dppe)2 ] (3 e). Analogous reactions of trans-[Ru(CH3 )2 (dmpe)2 ], featuring the more electron-donating 1,2-bis(dimethylphosphino)ethane (dmpe) ancillary ligands, with the propargylic alcohols A or C and NH4 PF6 in methanol allowed isolation of the intermediate mixed alkenylacetylide/allenylidene complexes trans-[Ru{C≡CC(=CH2 )R}{C=C=C(Me)}(dmpe)2 ]PF6 (R=Ph ([4 a]PF6 ), 4-MeS-C6 H4 ([4 c]PF6 ). Deprotonation of [4 a]PF6 or [4 c]PF6 gave the symmetric bis(alkenylacetylide) complexes trans-[Ru{C≡CC(=CH2 )R}2 (dmpe)2 ] (R=Ph (5 a), 4-MeS-C6 H4 (5 c)), the first of their kind containing the dmpe ancillary ligand sphere. Attempts to isolate bis(allenylidene) complexes [Ru{C=C=C(Me)R}2 (PP)2 ]2+ (PP=dppe, dmpe) from treatment of the bis(alkenylacetylide) species 3 or 5 with HBF4 ⋅ Et2 O were ultimately unsuccessful.

Fabrication of metallic and non-metallic top electrodes for large-area molecular junctions.

Molecular junctions have proven invaluable tools through which to explore the electronic properties of molecules and molecular monolayers. In seeking to develop a viable molecular electronics based technology it becomes essential to be able to reliably create larger area molecular junctions by contacting molecular monolayers to both bottom and top electrodes. The assembly of monolayers onto a conducting substrate by self-assembly, Langmuir-Blodgett and other methods is well established. However, the deposition of top-contact electrodes without film penetration or damage from the growing electrode material has proven problematic. This Review highlights the challenges of this area, and presents a selective overview of methods that have been used to solve these issues.

Synthesis of a diferrocenylvinylidene complex by migration of a ferrocenyl substituent.

An unusual 1,2-ferrocenyl migration has been observed following reactions of [Ru(dppe)Cp][BArF4] with diferrocenylacetylene, extending the scope of group rearrangments beyond methyl (Wagner-Meerwein) and phenyl entities. Ferrocene-containing bis(alkynes) RC[triple bond, length as m-dash]CArC[triple bond, length as m-dash]CR (R = Fc, Ar = 1,4-phenylene; R = Ph, Ar = 1,1'-ferrocenylene) gave bimetallic bis(vinylidene) complexes following two consecutive rearrangements.

Rip It off: Nitro to Nitroso Reduction by Iron Half-Sandwich Complexes.

Activation of [FeCl(dppe)Cp] (1) by chloride abstraction with Na[BArX4] (X = F, [B(3,5-(CF3)2-C6H3)4]; X = Cl, [B(3,5-Cl2-C6H3)4]) permits reactions with a range of nitro aromatics, RC6H4NO2 (R = halogen, Me, OMe, NO2 or NMe2), to give the cationic iron nitroso complexes [Fe{N(O)-C6H4R}(dppe)Cp][BArX4]) ([3][BArX4]). Similar reactions of 1 and Na[BArX4] with [Fe(NCC6H4NO2)(dppe)Cp][BArX4] gave bimetallic [{Fe(dppe)Cp}2{µ-N≡CC6H4N(O)}][BArF4]2. However, reactions of 1 and Na[BArX4] with 4-nitrophenol gave the first example of the bench-stable iron half-sandwich phenolate complex [Fe(OC6H4NO2)(dppe)Cp]+ rather than NO2 activation. The formation of complexes [3]+ likely proceeds via the unusual blue bimetallic species [{Fe(dppe)Cp}2{µ,κ2O,O'-O2NAr}]2+. This compound undergoes N-O bond cleavage, resulting in [3]+ and a FeIV═O species, which reacts via an internal C-H activation of the dppe ligand to give [FeIII(κ3O,P,P'-P(2-O-C6H4)(Ph)-C2H4-PPh2)Cp]+. Complexes [3]+ are stable under ambient conditions, are readily purified by column chromatography and can be isolated in up to 50% yield, considering that 0.5 equiv of 1 is required as the oxygen acceptor.

Molecular Structure-(Thermo)electric Property Relationships in Single-Molecule Junctions and Comparisons with Single- and Multiple-Parameter Models.

The most probable single-molecule conductance of each member of a series of 12 conjugated molecular wires, 6 of which contain either a ruthenium or platinum center centrally placed within the backbone, has been determined. The measurement of a small, positive Seebeck coefficient has established that transmission through these molecules takes place by tunneling through the tail of the HOMO resonance near the middle of the HOMO-LUMO gap in each case. Despite the general similarities in the molecular lengths and frontier-orbital compositions, experimental and computationally determined trends in molecular conductance values across this series cannot be satisfactorily explained in terms of commonly discussed "single-parameter" models of junction conductance. Rather, the trends in molecular conductance are better rationalized from consideration of the complete molecular junction, with conductance values well described by transport calculations carried out at the DFT level of theory, on the basis of the Landauer-Büttiker model.

Mix and (Mis)match: further studies of the electronic structure and mixed-valence characteristics of 1,4-diethynylbenzene-bridged bimetallic complexes.

The 1,4-diethynylbenzene motif is commonly employed as a bridging ligand in bimetallic molecular systems intended to show pronounced intramolecular electronic interactions, delocalized electronic structures and 'wire-like' properties between the metal fragments at the ligand termini. In contrast to these expectations, the donor-acceptor compounds [{Cp'(CO)xM'}(µ-C[triple bond, length as m-dash]CC6H4C[triple bond, length as m-dash]C){M(PP)Cp'}]n+ [n = 0, 1; M'(CO)xCp' = Fe(CO)2Cp, W(CO)3Cp*; M(PP)Cp' = Fe(dppe)Cp, Fe(dppe)Cp*, Ru(PPh3)2Cp, Ru(dppe)Cp, Ru(dppe)Cp*] display remarkably little bridge-mediated electronic interaction between the electron-rich {M(PP)Cp'} and electron-poor {M'(CO)xCp'} fragments in the ground state. However, a relatively high-energy (26 000-30 000 cm-1) M-to-M' charge transfer can be identified. One-electron oxidation is largely localized on the {M(C[triple bond, length as m-dash]CR)(PP)Cp'} fragment and gives rise to a new charge transfer band with bridging-ligand-to-{M(PP)Cp'}+ (M'(CO)xCp' = Fe(CO)2Cp) or M'-to-M(+) (M(CO)xCp' = W(CO)3Cp*) character. The localized electronic ground state of these complexes is better revealed through analysis of the IR spectra, taking advantage of the well-resolved ν(C[triple bond, length as m-dash]C) and ν(CO) bands and IR spectroelectrochemical methods, than through the more classical analysis based on the concepts of Marcus-Hush theory and analysis of the putative IVCT electronic transition. The conclusions are supported by DFT calculations using the BLYP35 functional.