Exploring spatio-temporal changes in coastal recreational fisheries and potential links to extreme weather events.

Extreme weather events across coastal environments are expected to increase in frequency under predicted climate change scenarios. These events can impact coastal recreational fisheries and their supporting ecosystems by influencing the productivity of fish stocks or altering behaviours and decision-making among fishers. Using off-site telephone/diary survey data on estuarine and oceanic recreational fishing activity in eastern Australia, we analyse interannual and geographic variability in bream (Acanthopagrus spp) and snapper (Chrysophrys auratus) catch, total effort and total catch per unit effort (CPUE) through a period (2013/2014, 2017/2018 and 2019/2020) that encompassed severe drought, bushfires and flooding. Interacting spatial and temporal differences were detected for bream and may reflect spatial variation in the intensity and extent of some of the extreme weather events. The catch of snapper did not change temporally, providing little evidence that this species' catch may be influenced by the extreme weather events. Independent bioregional and temporal effects on effort were detected, while CPUE only showed significant bioregional differences. Although adverse conditions created by the extreme weather events may have dissuaded fisher participation and impacted effort, we propose that the observed temporal patterns in effort reflect the early influence of socio-economic changes brought on by the COVID-19 pandemic on coastal recreational fishing, over and above the impacts of extreme weather events. This study demonstrates how interrelated ecological, social and economic factors can shape coastal recreational fisheries and facilitates development of management strategies to address future threats to the sector.

Treatment-emergent cefiderocol resistance in carbapenem-resistant Acinetobacter baumannii is associated with insertion sequence ISAba36 in the siderophore receptor pirA.

We report the emergence of cefiderocol resistance in a blaOXA-72 carbapenem-resistant Acinetobacter baumannii isolate from a sacral decubitus ulcer. Cefiderocol was initially used; however, a newly approved sulbactam-durlobactam therapy with source control and flap coverage was successful in treating the infection. Laboratory investigation revealed cefiderocol resistance mediated by ISAba36 insertion into the siderophore receptor pirA.

Scaling of Activity Space in Marine Organisms across Latitudinal Gradients.

AbstractUnifying models have shown that the amount of space used by animals (e.g., activity space, home range) scales allometrically with body mass for terrestrial taxa; however, such relationships are far less clear for marine species. We compiled movement data from 1,596 individuals across 79 taxa collected using a continental passive acoustic telemetry network of acoustic receivers to assess allometric scaling of activity space. We found that ectothermic marine taxa do exhibit allometric scaling for activity space, with an overall scaling exponent of 0.64. However, body mass alone explained only 35% of the variation, with the remaining variation best explained by trophic position for teleosts and latitude for sharks, rays, and marine reptiles. Taxon-specific allometric relationships highlighted weaker scaling exponents among teleost fish species (0.07) than sharks (0.96), rays (0.55), and marine reptiles (0.57). The allometric scaling relationship and scaling exponents for the marine taxonomic groups examined were lower than those reported from studies that had collated both marine and terrestrial species data derived using various tracking methods. We propose that these disparities arise because previous work integrated summarized data across many studies that used differing methods for collecting and quantifying activity space, introducing considerable uncertainty into slope estimates. Our findings highlight the benefit of using large-scale, coordinated animal biotelemetry networks to address cross-taxa evolutionary and ecological questions.

Temporal and regional variation in catch across an extensive coastal recreational fishery: Exploring the utility of survey methods to guide and assess spatio-temporal management initiatives.

As global research into recreational fishing gains momentum due to the pursuit's biological, social and economic impacts, information on regional and temporal patterns of recreational exploitation will continue to enable objective assessment and development of management initiatives for exploited species. This paper demonstrates the utility of offsite survey methods in assessing spatial and temporal differences in recorded catches from a large, diffuse and heterogenous coastal recreational fishery. Using the estuarine recreational fishery that operates along the coast of New South Wales, Australia as a case study, survey data was employed to quantify annual (June 2013-May 2014) state-wide estuarine catch. Generalized linear mixed effects models were then applied to expanded catch estimates from surveyed households to examine the influence of zone and season on the kept and released numbers of snapper (Pagrus auratus), dusky flathead (Platycephalus fuscus) and bream (Acanthopagrus spp. complex comprised of A. butcheri, A. australis and their hybrids). For kept bream, significant differential seasonal effects were observed in all regions except the Mid-South Coast. For released bream, numbers were greatest in Sydney and during Summer and Winter. For kept snapper, the greatest harvest was recorded in the Mid-South Coast but season had no effect. Differential seasonal effects were found in each zone for released snapper. For kept dusky flathead, the greatest numbers were recorded in Sydney and the Mid-South Coast but season had no effect. We conclude by assessing some current spatial and temporal management initiatives in light of the uncovered patterns of recreational catch and consider the implications of these patterns in terms of future ecosystem-based management recommendations aimed at achieving ecological, social and economic sustainability in fisheries.

Quantifying bicycle network connectivity.

The intent of this study was to compare bicycle network connectivity for different types of bicyclists and different neighborhoods. Connectivity was defined as the ability to reach important destinations, such as grocery stores, banks, and elementary schools, via pathways or roads with low vehicle volumes and low speed limits. The analysis was conducted for 28 neighborhoods in Seattle, Washington under existing conditions and for a proposed bicycle master plan, which when complete will provide over 700 new bicycle facilities, including protected bike lanes, neighborhood greenways, and multi-use trails. The results showed different levels of connectivity across neighborhoods and for different types of bicyclists. Certain projects were shown to improve connectivity differently for confident and non-confident bicyclists. The analysis showed a positive correlation between connectivity and observed utilitarian bicycle trips. To improve connectivity for the majority of bicyclists, planners and policy-makers should provide bicycle facilities that allow immediate, low-stress access to the street network, such as neighborhood greenways. The analysis also suggests that policies and programs that build confidence for bicycling could greatly increase connectivity.

The effects of substratum material and surface orientation on the developing epibenthic community on a designed artificial reef.

Artificial reefs provide shelter and can be an important source of food for fish depending on the epibenthic community on the structure. The growth and diversity of this community is influenced by the substratum material and the surface orientation of the reef. Settlement plates of four materials (Perspex, sandstone, wood and steel) were deployed in three orientations (upwards, downwards and vertical) at a depth of 33 m on a designed artificial reef (DAR) off the coast of Sydney, Australia. After three months, the steel surfaces had lower invertebrate species richness, total abundance and diversity compared to other surfaces. Steel was not an ideal material for the initial recruitment and growth of epibenthic invertebrates. A longer duration would be required to develop a mature epibenthic community. Surface orientation had species-specific impacts. Surface material and orientation are important factors for developing epibenthic assemblages, and are thus likely to affect the broader artificial reef assemblage, including fish.

A practical model for reflection on practice.

Although nurses are encouraged to reflect on their practice from pre-registration education onwards, many are anxious about the process and unclear how it is done or what it can achieve. This article discusses approaches to reflection and presents a new, triangular model of reflection that encourages nurses to share their reflections and helps to ensure they gain useful insights from the exercise.

Rectal drug administration in adults: how, when, why.

Administering medication per rectum can be the most appropriate route for some patients may not always be considered by health professionals. Cultural sensitivities, as well as misinformation regarding insertion methods, may be barriers to the practice. This article explains how the rectal route functions in drug absorption, clarifies when this route is appropriate to use and outlines the steps nurses should follow to prepare patients adequately and safely to carry out the procedure.

Evaluation of total knee mechanics using a crouching simulator with a synthetic knee substitute.

Mechanical evaluation of total knees is frequently required for aspects such as wear, strength, kinematics, contact areas, and force transmission. In order to carry out such tests, we developed a crouching simulator, based on the Oxford-type machine, with novel features including a synthetic knee including ligaments. The instrumentation and data processing methods enabled the determination of contact area locations and interface forces and moments, for a full flexion-extension cycle. To demonstrate the use of the simulator, we carried out a comparison of two different total knee designs, cruciate retaining and substituting. The first part of the study describes the simulator design and the methodology for testing the knees without requiring cadaveric knee specimens. The degrees of freedom of the anatomic hip and ankle joints were reproduced. Flexion-extension was obtained by changing quadriceps length, while variable hamstring forces were applied using springs. The knee joint was represented by three-dimensional printed blocks on to which the total knee components were fixed. Pretensioned elastomeric bands of realistic stiffnesses passed through holes in the block at anatomical locations to represent ligaments. Motion capture of the knees during flexion, together with laser scanning and computer modeling, was used to reconstruct contact areas on the bearing surfaces. A method was also developed for measuring tibial component interface forces and moments as a comparative assessment of fixation. The method involved interposing Tekscan pads at locations on the interface. Overall, the crouching machine and the methodology could be used for many different mechanical measurements of total knee designs, adapted especially for comparative or parametric studies.

Fish attraction to artificial reefs not always harmful: a simulation study.

The debate on whether artificial reefs produce new fish or simply attract existing fish biomass continues due to the difficulty in distinguishing these processes, and there remains considerable doubt as to whether artificial reefs are a harmful form of habitat modification. The harm typically associated with attraction is that fish will be easier to harvest due to the existing biomass aggregating at a newly deployed reef. This outcome of fish attraction has not progressed past an anecdotal form, however, and is always perceived as a harmful process. We present a numerical model that simulates the effect that a redistributed fish biomass, due to an artificial reef, has on fishing catch per unit effort (CPUE). This model can be used to identify the scenarios (in terms of reef, fish, and harvest characteristics) that pose the most risk of exploitation due to fish attraction. The properties of this model were compared to the long-standing predictions by Bohnsack (1989) on the factors that increase the risk or the harm of attraction. Simulations revealed that attraction is not always harmful because it does not always increase maximum fish density. Rather, attraction sometimes disperses existing fish biomass making them harder to catch. Some attraction can be ideal, with CPUE lowest when attraction leads to an equal distribution of biomass between natural and artificial reefs. Simulations also showed that the outcomes from attraction depend on the characteristics of the target fish species, such that transient or pelagic species are often at more risk of harmful attraction than resident species. Our findings generally agree with Bohnsack's predictions, although we recommend distinguishing "mobility" and "fidelity" when identifying species most at risk from attraction, as these traits had great influence on patterns of harvest of attracted fish biomass.

Fish assemblages on estuarine artificial reefs: natural rocky-reef mimics or discrete assemblages?

If the primary goal of artificial reef construction is the creation of additional reef habitat that is comparable to adjacent natural rocky-reef, then performance should be evaluated using simultaneous comparisons with adjacent natural habitats. Using baited remote underwater video (BRUV) fish assemblages on purpose-built estuarine artificial reefs and adjacent natural rocky-reef and sand-flat were assessed 18 months post-deployment in three south-east Australian estuaries. Fish abundance, species richness and diversity were found to be greater on the artificial reefs than on either naturally occurring reef or sand-flat in all estuaries. Comparisons within each estuary identified significant differences in the species composition between the artificial and natural rocky-reefs. The artificial reef assemblage was dominated by sparid species including Acanthopagrus australis and Rhabdosargus sarba. The preference for a range of habitats by theses sparid species is evident by their detection on sand-flat, natural rocky reef and artificial reef habitats. The fish assemblage identified on the artificial reefs remained distinct from the adjacent rocky-reef, comprising a range of species drawn from naturally occurring rocky-reef and sand-flat. In addition, some mid-water schooling species including Trachurus novaezelandiae and Pseudocaranx georgianus were only identified on the artificial reef community; presumably as result of the reef's isolated location in open-water. We concluded that estuarine artificial reef assemblages are likely to differ significantly from adjacent rocky-reef, potentially as a result of physical factors such as reef isolation, coupled with species specific behavioural traits such as the ability of some species to traverse large sand flats in order to locate reef structure, and feeding preferences. Artificial reefs should not be viewed as direct surrogates for natural reef. The assemblages are likely to remain distinct from naturally occurring habitat comprised of species that reside on a range of adjacent natural habitats.

The effect of geometric variations in posterior-stabilized knee designs on motion characteristics measured in a knee loading machine.

BACKGROUND: In different posterior-stabilized (PS) total knees, there are considerable variations in condylar surface radii and cam-post geometry. To what extent these variations affect kinematics is not known. Furthermore, there are no clearly defined ideal kinematics for a total knee. QUESTIONS/PURPOSES: The purposes of this study were to determine (1) what the kinematic differences are caused by geometrical variations between PS total knee designs in use today; and (2) what design characteristics will produce kinematics that closely resemble that of the normal anatomic knee. METHODS: Four current PS designs with different geometries and one experimental asymmetric PS design, with a relatively conforming medial side, were tested in a purpose-built machine. The machine applied combinations of compressive, shear, and torque forces at a sequence of flexion angles to represent a range of everyday activities, consistent with the ASTM standard test for measuring constraint. The femorotibial contact points, the neutral path of motion, and the AP and internal-external laxities were used as the kinematic indicators. RESULTS: The PS designs showed major differences in motion characteristics among themselves and with motion data from anatomic knees determined in a previous study. Abnormalities in the current designs included symmetric mediolateral motion, susceptibility to excessive AP medial laxity, and reduced laxity in high flexion. The asymmetric-guided motion design alleviated some but not all of the abnormalities. CONCLUSIONS: Current PS designs showed kinematic abnormalities to a greater or lesser extent. An asymmetric design may provide a path to achieving a closer match to anatomic kinematics. CLINICAL RELEVANCE: One criterion for the evaluation of PS total knees is how closely the kinematics of the prosthesis resemble that of the anatomic knee, because this is likely to affect the quality of function.

Influence of approach velocity and mesh size on the entrainment and contact of a lowland river fish assemblage at a screened irrigation pump.

Fish screens can help prevent the entrainment or injury of fish at irrigation diversions, but only when designed appropriately. Design criteria cannot simply be transferred between sites or pump systems and need to be developed using an evidence-based approach with the needs of local species in mind. Laboratory testing is typically used to quantify fish responses at intake screens, but often limits the number of species that can studied and creates artificial conditions not directly applicable to screens in the wild. In this study a field-based approach was used to assess the appropriateness of different screen design attributes for the protection of a lowland river fish assemblage at an experimental irrigation pump. Direct netting of entrained fish was used along with sonar technology to quantify the probability of screen contact for a Murray-Darling Basin (Australia) fish species. Two approach velocities (0.1 and 0.5 m.sec(-1)) and different sizes of woven mesh (5, 10 and 20 mm) were evaluated. Smaller fish (<150 mm) in the assemblage were significantly more susceptible to entrainment and screen contact, especially at higher approach velocities. Mesh size appeared to have little impact on screen contact and entrainment, suggesting that approach velocity rather than mesh size is likely to be the primary consideration when developing screens. Until the effects of screen contacts on injury and survival of these species are better understood, it is recommended that approach velocities not exceed 0.1 m.sec(-1) when the desire is to protect the largest range of species and size classes for lowland river fish assemblages in the Murray-Darling Basin. The field method tested proved to be a useful approach that could compliment laboratory studies to refine fish screen design and facilitate field validation.

Modeling approaches for characterizing and evaluating environmental exposure to engineered nanomaterials in support of risk-based decision making.

As the use of engineered nanomaterials becomes more prevalent, the likelihood of unintended exposure to these materials also increases. Given the current scarcity of experimental data regarding fate, transport, and bioavailability, determining potential environmental exposure to these materials requires an in depth analysis of modeling techniques that can be used in both the near- and long-term. Here, we provide a critical review of traditional and emerging exposure modeling approaches to highlight the challenges that scientists and decision-makers face when developing environmental exposure and risk assessments for nanomaterials. We find that accounting for nanospecific properties, overcoming data gaps, realizing model limitations, and handling uncertainty are key to developing informative and reliable environmental exposure and risk assessments for engineered nanomaterials. We find methods suited to recognizing and addressing significant uncertainty to be most appropriate for near-term environmental exposure modeling, given the current state of information and the current insufficiency of established deterministic models to address environmental exposure to engineered nanomaterials.

Development of a coupled reactor model for prediction of organic contaminant fate in landfills.

Models describing the behavior of organic chemicals in landfills can be useful to predict their fate and transport and also to generate input data for estimates of exposure and risk. The landfill coupled-reactor (LFCR) model developed in this work simulates a landfill as a series of fully mixed reactors, each representing a daily volume of waste. The LFCR model is a numerical model allowing time-variable input parameters such as gas generation, and cover type and thickness. The model was applied to three volatile organic chemicals (acetone, toluene, benzene) as well as naphthalene and the chemical warfare agent sarin under three landfill conditions (conventional, arid, bioreactor). Sarin was rapidly hydrolyzed, whereas naphthalene was largely associated with the landfill solid phase in all scenarios. Although similar biodegradation rates were used for acetone and toluene, toluene was more persistent in the landfill due to its hydrophobicity. The cover soil moisture content had a significant impact on gaseous diffusive losses.

How to build a mammalian super-predator.

Questions surrounding the biology of large fossil predators that differ markedly from living forms have long intrigued palaeobiologists. Among such taxa few have excited more interest than sabertooth cats, whose distinctive hypertrophied canines are suggestive of killing behaviors and feeding ecologies that may have departed widely from those of extant carnivores. Moreover, considerable variation among sabertooth species is further suggestive of intriguing differences within the group. Behavior and ecology in another large, extinct mammalian carnivore, the Australian marsupial lion (Thylacoleo carnifex), has also proven contentious. In this study, we assemble a wide range of cranio-dental and postcranial indices in a dataset including machairodont sabertooths, T. carnifex and an extensive sample of extant taxa in order to examine the palaeobiology of these charismatic fossil carnivores. Results of multivariate analyses point to significant relationships between behavior and overall body proportions in extant mammalian carnivores. Postcranial morphologies of two American dirk-tooth species of sabertooth (Smilodon) depart greatly from those of living felids and group most closely with bears among living placentals. Scimitar-tooth species of Homotherium and Machairodus cluster with modern pantherine cats. The marsupial lion groups with Smilodon. If these latter two phylogenetically disparate clades do represent a specialized, robust ecomorph adapted to predation on large prey, then it is a body plan that might be effectively identified on the basis of a handful of 'bear-like' postcranial features in combination with a more typically 'felid-like' carnassialization of the cheektooth row.

Synthesis, separation, and circularly polarized luminescence studies of enantiomers of iridium(III) luminophores.

A family of heteroleptic (C;N)2Ir(acac) and homoleptic fac-Ir(C;N)3 complexes have been synthesized and their photophysical properties studied (where C;N = a substituted 2-phenylpyridine and acac = acetylacetonate). The neutral Delta and Lambda complexes were separated with greater than 95% enantiomeric purity by chiral supercritical fluid chromatography, and the solution circular dichroism and circularly polarized luminescence spectra for each of the enantio-enriched iridium complexes were obtained. The experimentally measured emission dissymmetries (gem) for this series compared well with predicted values provided by time-dependent density functional theory calculations. The discovered trend further showed a correlation with the dissymmetries of ionic, enantiopure hemicage compounds of Ru(II) and Zn(II), thus demonstrating the applicability of the model for predicting emission dissymmetry values across a wide range of complexes.

Synthetically tailored excited states: phosphorescent, cyclometalated iridium(III) complexes and their applications.

Phosphorescent iridium(III) complexes are being widely explored for their utility in diverse photophysical applications. The performance of these materials in such roles depends heavily on their excited-state properties, which can be tuned through ligand and substituent effects. This concept article focuses on methods for synthetically tailoring the properties of bis-cyclometalated iridium(III) materials, and explores the factors governing the nature of their lowest excited state.

Discovery and high-throughput screening of heteroleptic iridium complexes for photoinduced hydrogen production.

The catalytic process of photoinduced hydrogen generation via the reduction of water has been investigated. The use of parallel synthetic techniques has facilitated the synthesis of a 32 member library of heteroleptic iridium complexes that was screened, using high-throughput photophysical techniques, to identify six potential photosensitizers for use in catalytic photoinduced hydrogen production. A Pd/Ni thin film hydrogen selective sensor allowed for rapid quantification of hydrogen produced via illumination of aqueous systems of the photosensitizer, tris(2,2'-dipyridyl)dichlorocobalt ([Co(bpy)(3)]Cl(2)), and triethanolamine (a sacrificial reductant) with ultra-bright light emitting diodes (LEDs). The use of an 8-well parallel photoreactor expedited the investigation of the hydrogen evolution process and facilitated mechanistic studies. All six compounds investigated produced considerably more hydrogen than commonly utilized photosensitizers and had relative quantum efficiencies of hydrogen production up to 37 times greater than that of Ru(bpy)(3)(2+).