A near-infrared fluorescent probe for the detection of Cu2+ in Chinese herbal medicine and imaging in living cells.

Copper is one of the common among the heavy metal pollution in Chinese herbal medicine (CHM). So, it is essential to develop rapid and accurate testing method to quantify the Cu2+ content in CHM. Herein, we prepared a coordination-based near-infrared fluorescent probe (NRh6G-FA) by introducing a hemicyanine dye in rhodamine 6G scaffold. NRh6G-FA had a high sensitivity, anti-interference performance, fast response (within 60 s), visualization (from light yellow to green) for Cu2+ and excellent sensing performance for the detection of Cu2+ at low concentrations (LOD = 0.225 µM). The most likely mechanism was verified on the basis of Job's plot, ESI-HRMS and DFT calculations. NRh6G-FA could be successfully applied for the detection and "naked eye" recognition of Cu2+ in CHM samples. Moreover, NRh6G-FA was used to visualize Cu2+ in living MCF-7 cells by confocal fluorescence imaging.

Elastic films of single-crystal two-dimensional covalent organic frameworks.

The properties of polycrystalline materials are often dominated by defects, and two-dimensional (2D) crystals can even be divided and disrupted by a line defect1-3. In contrast, 2D crystals are often required to be processed into films, which are inevitably polycrystalline and contain numerous grain boundaries, and therefore are brittle and fragile, hindering application in flexible electronics, optoelectronics and separation1-4. Moreover, similar to glass, wood, and plastics, they suffer from trade-off effects between mechanical strength and toughness.5, 6 Here, we report a method to produce highly strong, tough and elastic films of an emerging class of 2D crystals - 2D covalent organic frameworks (COFs) composed of single-crystal domains connected by interwoven grain boundary on water surface using an aliphatic bi-amine as a sacrificial go-between. Films of two 2DCOFs were demonstrated, which showed Young's moduli and breaking strength of 56.7 ± 7.4 GPa and 73.4 ± 11.6 GPa, and 82.2 ± 9.1 N/m and 29.5 ± 7.2 N/m, respectively. We envisage the sacrificial go-between guided synthesis method and the interwoven grain boundary will inspire grain boundary enigineering of various polycrystalline materials, endowing them with new properties, enhancing their current applications and paving the way for new applications.

Deciphering antifungal and antibiofilm mechanisms of isobavachalcone against Cryptococcus neoformans through RNA-seq and functional analyses.

Cryptococcus neoformans has been designated as critical fungal pathogens by the World Health Organization, mainly due to limited treatment options and the prevalence of antifungal resistance. Consequently, the utilization of novel antifungal agents is crucial for the effective treatment of C. neoformans infections. This study exposed that the minimum inhibitory concentration (MIC) of isobavachalcone (IBC) against C. neoformans H99 was 8 µg/mL, and IBC dispersed 48-h mature biofilms by affecting cell viability at 16 µg/mL. The antifungal efficacy of IBC was further validated through microscopic observations using specific dyes and in vitro assays, which confirmed the disruption of cell wall/membrane integrity. RNA-Seq analysis was employed to decipher the effect of IBC on the C. neoformans H99 transcriptomic profiles. Real-time quantitative reverse transcription PCR (RT-qPCR) analysis was performed to validate the transcriptomic data and identify the differentially expressed genes. The results showed that IBC exhibited various mechanisms to impede the growth, biofilm formation, and virulence of C. neoformans H99 by modulating multiple dysregulated pathways related to cell wall/membrane, drug resistance, apoptosis, and mitochondrial homeostasis. The transcriptomic findings were corroborated by the antioxidant analyses, antifungal drug sensitivity, molecular docking, capsule, and melanin assays. In vivo antifungal activity analysis demonstrated that IBC extended the lifespan of C. neoformans-infected Caenorhabditis elegans. Overall, the current study unveiled that IBC targeted multiple pathways simultaneously to inhibit growth significantly, biofilm formation, and virulence, as well as to disperse mature biofilms of C. neoformans H99 and induce cell death.

Isobavachalcone exhibits antifungal and antibiofilm effects against C. albicans by disrupting cell wall/membrane integrity and inducing apoptosis and autophagy.

Isobavachalcone (IBC) is a natural flavonoid with multiple pharmacological properties. This study aimed to evaluate the efficacy of IBC against planktonic growth and biofilms of Candida albicans (C. albicans) and the mechanisms underlying its antifungal action. The cell membrane integrity, cell metabolic viability, and cell morphology of C. albicans treated with IBC were evaluated using CLSM and FESEM analyses. Crystal violet staining, CLSM, and FESEM were used to assess the inhibition of biofilm formation, as well as dispersal and killing effects of IBC on mature biofilms. RNA-seq combined with apoptosis and autophagy assays was used to examine the mechanisms underlying the antifungal action of IBC. IBC exhibited excellent antifungal activity with 8 µg/mL of MIC for C. albicans. IBC disrupted the cell membrane integrity, and inhibited biofilm formation. IBC dispersed mature biofilms and damaged biofilm cells of C. albicans at 32 µg/mL. Moreover, IBC induced apoptosis and autophagy-associated cell death of C. albicans. The RNA-seq analysis revealed upregulation or downregulation of key genes involved in cell wall synthesis (Wsc1 and Fks1), ergosterol biosynthesis (Erg3, and Erg11), apoptisis (Hsp90 and Aif1), as well as autophagy pathways (Atg8, Atg13, and Atg17), and so forth, in response to IBC, as evidenced by the experiment-based phenotypic analysis. These results suggest that IBC inhibits C. albicans growth by disrupting the cell wall/membrane, caused by the altered expression of genes associated with ß-1,3-glucan and ergosterol biosynthesis. IBC induces apoptosis and autophagy-associated cell death by upregulating the expression of Hsp90, and altering autophagy-related genes involved in the formation of the Atg1 complex and the pre-autophagosomal structure. Together, our findings provide important insights into the potential multifunctional mechanism of action of IBC.

Nitrogen and nitrous oxides emission characteristics of anoxic/oxic wastewater treatment process under different oxygen regulation strategies.

Nitrous oxide (N2O) and nitrogen oxides (NOx) (i.e., nitric oxide (NO) and nitrogen dioxide (NO2)), which could be produced in wastewater treatment process and result in greenhouse effect and atmospheric pollution, respectively, have been studied limitedly in their emission characteristics and transformation mechanisms. In this study, intelligent oxygen regulation was applied in anoxic/oxic wastewater treatment process (I-A/O), and its effects on regulating NOx and N2O transformations were extensively explored by comparing it with conventional A/O process (C-A/O). Results showed that the average emission amounts of N2O and NOx in I-A/O were 7.45 ± 0.66 mg and 1.88 ± 0.10 mg, respectively. Satisfactory reduction of N2O by 29.28 %-45.08 % was achieved in I-A/O compared to that of C-A/O, but together with increased NOx emission by 83.19 %-120.57 %. Pearson correlation and transcriptional analysis suggested that NO2--N reduction in the anoxic phase dominated N2O production, while no significant N2O production in the oxic phase was found. Hence, the reduced N2O production in I-A/O was mainly attributed to its efficient denitrification process. On the other hand, both the anoxic and oxic phases played important roles in NO production. More importantly, sufficient oxygen in I-A/O promoted the ammonia oxidation process, resulting in higher NO emission in I-A/O in the oxic phase. The imbalance in NO and N2O emissions was then amplified by the NOR enzyme, which mediates the conversion of NO to N2O in both the anoxic and oxic phases. Besides, carbon emission reduction by 31.32 %-36.50 % was obtained in I-A/O due to aeration consumption savings and greenhouse gas emissions reduction compared to C-A/O. Overall, intelligent oxygen regulation optimized the nitrogen transformation and achieved carbon emission reduction in A/O process, but special attention should be paid to the associated risk caused by increased NO emissions.

Key biological processes and essential genes for Proteus mirabilis biofilm development inhibition by protocatechuic acid.

Proteus mirabilis is an opportunistic pathogen linked to human urinary tract infections, and is potentially present as a foodborne pathogen within poultry products, including broiler chickens. This report outlines the inhibitory impacts of protocatechuic acid (PCA) on P. mirabilis isolated from a broiler slaughterhouse in China as well as its biofilm. This investigation encompasses assays related to motility and adhesion, bacterial metabolic activity, extracellular polymer (EPS) production, and scavenging capacity. The findings demonstrated that PCA reduced biofilm formation by 61 %. Transcriptomics findings identified that PCA limited the expression of genes like PstS that promote adhesin formation, rbsA and RcsB that alter bacterial chemotaxis, lipopolysaccharide synthesis genes LpxA and EptB, and cell wall synthesis genes MurF and MrdA, and affects the Regulator of Capsule Synthesis (RCS) two-component modulation system. Weighted gene co-expression network analysis (WGCNA) was conducted to identify the core genes. Furthermore, the binding sites of PCA to cytochrome oxidases cydA and cydB, two subunits of ATP synthase atpI and atpH, and ftsZ, which regulate bacterial division, were predicted via molecular docking. Metabolome analysis determined that PCA critically influenced coenzyme A biosynthesis, nucleotide metabolism, alanine, aspartic acid, and glutamate metabolic pathways of P. mirabilis. Therefore, PCA impacts metabolism within bacteria via various pathways, limiting the levels of extracellular polymer and bacterial viability to hinder biofilm formation. Additionally, we prepared an antibacterial plastic film containing protocatechuic acid using PVA as the monomer and CNC as the reinforcing agent. We examined the mechanical and antibacterial properties of this film. When used to wrap chicken, it reduced the total number of colonies, slowed the deterioration of chicken, and maintained the freshness of chicken. In conclusion, the information outlined in this study complements our comprehension of P. mirabilis inhibition by PCA and provides clues for the reduction of foodborne infections associated with P. mirabilis.

Novel tetranuclear grid-like Zn(II) complexes derived from dihydrazone pyrimidine derivatives as antitumor agents.

Due to the antitumor properties, Zn(II) complexes have attracted more and more attention. Herein, three novel tetranuclear Zn(II) complexes 1-3 based on dihydrazone pyrimidine derivatives H2L1-H2L3 were synthesized and characterized using IR spectroscopy, 1H NMR spectroscopy, single crystal X-ray diffraction analysis, XRD, TG and elemental analysis. Single crystal X-ray diffraction analysis revealed that 1-3 all displayed a [2 × 2] grid-like topology. The stability in solution, lipophilicity, confocal imaging and antitumor activities were investigated. Complexes 1-3 displayed high structural stability, membrane permeability and different lipophilicities. They can target mitochondria due to the cation charge. The MTT assay indicated that all of them exhibited stronger antiproliferative activity than the corresponding derivatives H2L1-H2L3 and the well-known cisplatin against all the selected tumor cells (BGC-823, BEL-7402, MCF-7 and A549), with IC50 values ranging from 2.83 µM to 7.97 µM. AO/EB double staining, flow cytometry and ROS detection suggested that complexes 1 and 2 could induce BGC-823 apoptosis in a dose-dependent manner. UV-Vis spectra, CD spectra, viscosity analysis and molecular docking revealed that complexes 1 and 2 interact with DNA mainly via partial intercalation and groove binding. Tetranuclear [2 × 2] grid-like Zn(II) complexes have the potential to be promising antitumor agents in the future.

Effect of Shock-Wave-Mediated Collapse on Nanobubble Characteristics.

To enhance the comprehension of the cavitation mechanism and explore its practical use in industrial production, this study developed models involving oxygen, varying bubble radii, and bubble quantities. This study uses molecular dynamics simulations coupled with the momentum mirror method to examine the collapse characteristics of bubbles during ultrasonic cavitation. The investigation uncovers patterns in the fluctuation of the maximum local density of water molecules, released pressure, and temperature. The findings demonstrate that, when oxygen-containing bubbles collapse at identical radii, the local density is notably higher and diminishes more rapidly. Moreover, the changes in the shape exhibit greater regularity. During the bubble collapse, a depression forms on the bubble's surface, coinciding with a notable surge in local density around the depression. As bubble radii and quantities increase, so does the local density along with a concurrent rise in the maximum pressure. Intriguingly, the model demonstrates the lowest pressure at Z = 35 Å accompanied by the emergence of a small crescent-shaped region with a reduced density. Throughout the pressure ascension phase, the rate of the maximum pressure change escalates with an increase in the number of bubbles. Conversely, during the pressure descent phase, the rate of the maximum pressure change diminishes with a growing number of bubbles. However, it is important to note that the maximum pressure does not exhibit a direct correlation with the number of bubbles. Ultimately, this study provides valuable technical guidance and a theoretical foundation for the integration of ultrasonic cavitation in industrial production processes.

Releasing and Assessing the Toxicity of Polycyclic Aromatic Hydrocarbons from Biochar Loaded with Iron.

Iron (Fe)-loaded biochar has garnered attention for its potential applications in recent years. However, the pyrolysis process of Fe-loaded biochar generates polycyclic aromatic hydrocarbons (PAHs), which can have adverse effects on both human health and the environment. This study explored the correlation between Fe loading and PAH production in Fe-loaded biochar. The results indicate that increasing Fe loading in biochar reduces the PAH concentration, with the most significant decrease observed in naphthalene (0.02-0.08 mg/kg). This reduction can be attributed to the decrease in precursor compounds (e.g., C2H2), substitution of the C=O bond by Fe-O, and a decrease in the dissolved organic matter concentration (3.19-10.76 mg/L) with Fe loading. When Fe loading increased from 0 to 10%, the ecological toxicity of biochar increased by 33.48% due to an elevated production of dibenzo[a,h]anthracene, which poses a significant risk to human health. Therefore, it is imperative to take into consideration the ecological risk of PAHs prior to the application of Fe-loaded biochar. This study presents a comprehensive risk assessment of Fe-loaded biochar and provides valuable insights into the optimization of its production and safe application.

Growth and Local Structures of Single Crystalline Flakes of Three-Dimensional Covalent Organic Frameworks in Water.

Due to the enormous chemical and structural diversities and designable properties and functionalities, covalent organic frameworks (COFs) hold great promise as tailored materials for industrial applications in electronics, biology, and energy technologies. They were typically obtained as partially crystalline materials, although a few single-crystal three-dimensional (3D) COFs have been obtained recently with structures probed by diffraction techniques. However, it remains challenging to grow single-crystal COFs with controlled morphology and to elucidate the local structures of 3D COFs, imposing severe limitations on the applications and understanding of the local structure-property correlations. Herein, we develop a method for designed growth of five types of single crystalline flakes of 3D COFs with controlled morphology, front crystal facets, and defined edge structures as well as surface chemistry using surfactants that can be self-assembled into layered structures to confine crystal growth in water. The flakes enable direct observation of local structures including monomer units, pore structure, edge structure, grain boundary, and lattice distortion of 3D COFs as well as gradually curved surfaces in kinked but single crystalline 3D COFs with a resolution of up to ∼1.7 Å. In comparison with flakes of two-dimensional crystals, the synthesized flakes show much higher chemical, mechanical, and thermal stability.

Distribution, sources, ecological risk and microbial response of polycyclic aromatic hydrocarbons in Qingdao bays, China.

Bay ecosystem has garnered significant attention due to the severe threat posed by organic pollutants, particularly polycyclic aromatic hydrocarbons (PAHs). However, there is a dearth of information regarding the extent of PAHs pollutant risk and its impact on microbial communities and metabolism within this environment. In this study, the distribution, sources, ecological risk, and microbial community and metabolic response of PAHs in Jiaozhou Bay, Aoshan Bay, and Lingshan Bay in Qingdao, China were investigated. The results showed that the average concentration of ∑PAHs ranged from 120 to 614 ng/L across three bays, with Jiaozhou and Aoshan Bay exhibiting a higher risk than Lingshan Bay due to an increased concentration of high-molecular-weight PAHs. Further analysis revealed a negative correlation between dissolved organic carbon concentration and ∑PAHs concentration in water. Metagenomic analysis demonstrated that higher levels of PAHs can lead to decreased microbial diversity, while the abundance of PAHs-degrading bacteria is enhanced. Additionally, the Erythrobacter, Jannaschia and Ruegeria genera were found to have a significant correlation with low-molecular-weight PAH concentrations. In terms of microbial metabolism, higher PAH concentrations were beneficial for carbohydrate metabolic pathway but unfavorable for amino acid metabolic pathways and membrane transport pathways in natural bay environments. These findings provide a foundation for controlling PAHs pollution and offer insights into the impact of PAHs on bacterial communities and metabolism in natural bay environments.

Highly efficient phosphorous removal in constructed wetland with iron scrap: Insights into the microbial removal mechanism.

Excessive phosphorus (P) in surface water can lead to serious eutrophication and economic losses. Iron-based constructed wetland (CW) is considered as a promising solution to eliminate P effectively due to the advantage of low-cost. However, there is limited available information on the microbial removal mechanism of P in iron-based CW up to now. Therefore, CW with iron scrap was constructed to investigate the treatment performance and microbial removal mechanism in this study. Results showed that efficient and stable P removal (97.09 ± 1.90%) was achieved in iron scrap-based CW during the experiment period, which was attributed to the precipitation of iron and P and improved microbially mediated P removal. Metagenomic analysis showed that microbial diversity was enhanced and phosphate accumulating organisms (e.g., Dechloromonas and Tetrasphaera) were enriched in CW with iron scrap, which explained higher P removal reasonably. In addition, the abundance of genes involved in the P starvation (e.g., phoB), uptake and transport (e.g., pstB) were enhanced in iron scrap-based CW. Enrichment analysis demonstrated that phosphotransferase pathway was also significantly up-regulated in CW with iron scraps, indicating that the energy supply of microbial P removal was enhanced. These findings provide a better understanding of the microbial removal mechanism of P in iron-based CW.

Editable 3D Micro-Supercapacitor with High Energy Density Based on Mortise-Tenon Joint Structures.

Three-dimensional micro-supercapacitors (3D MSCs) have accelerated the development of microenergy-storage modules for miniaturized and portable electronics. However, the low energy density, complex construction strategy, and low assembly accuracy of a 3D MSC restrict its practical application. Herein, we design a simple construction strategy for a 3D MSC with high energy density by mortise and tenon structures. Wood-derived carbon modified by nitrogen-doped carbon nanotube arrays (N-CNT-WDC) provides an ordered ion transport channel and a large active specific surface area, availing the improvement of the energy density of a 3D MSC. Its strong carbon skeleton structure supports the construction of 3D interdigital electrodes with a tenon structure by laser, realizing precise and regulable assembly of 3D MSCs through a mortise and tenon joint. The prepared 3D MSC based on N-CNT-WDC shows an excellent volumetric capacitance of 93.66 F cm-3, a high volumetric energy density of 12 mW h cm-3 at 600 mA cm-3, and an 85% retention rate of capacitance after 10,000 cycles of charge and discharge at 1000 mA cm-3. Furthermore, the mortise and tenon structure realizes diversified integration of 3D MSCs, making the integrated manufacturing of 3D microdevices more convenient and promoting their application in microelectronic devices.

Biologics for pediatric atopic dermatitis: A protocol of a systematic review and meta-analysis.

BACKGROUND: Atopic dermatitis is a chronic pruritic inflammatory skin disease commonly occurring in children. The objective of this study is to evaluate the treatment of pediatric atopic dermatitis with biologics, as they have displayed immense promising results in several recent clinical trials on atopic dermatitis (AD). METHODS: We will conduct an extensive search for RCTs in several databases, including Embase, Cochrane Library, Web of Science, and PubMed, from the inception of the study till 15th May 2022. The primary outcomes will be the proportion of patients with EASI 75/90/100 after 12-16 weeks of treatment. The secondary outcomes will include the Numerical Rating Scale (NRS), Investigator Global Assessment (IGA)0-1, body surface area (BSA), Dermatology Life Quality Index (DLQI) scores, and incidence of adverse reactions. All studies will be screened by two independent researchers. They will assess the risk of bias in the included studies according to the RCTs bias risk evaluation tool in Cochrane System Review Manual 5.1.0. Meta-analysis will be performed using RevMan V.5.3.0 software. RESULTS: The research results will provide a reference for the clinical application of biological agents in pediatric atopic dermatitis. CONCLUSION: We aim to evaluate the efficacy and safety of biologics in pediatric atopic dermatitis cases and provide evidence-based data for easy clinical application. PROSPERO REGISTRATION NUMBER: CRD42022319052 (https://www.crd.york.ac.uk/PROSPERO/#joinuppage).

Study on the Unsteady Characteristics and Radial Force of a Single-Channel Centrifugal Pump.

To research the internal flow characteristics of a single-channel centrifugal pump, the computational fluid dynamics method is used in this study. Several monitoring points are set on the volute to analyze the change of pressure pulsation and radial force when the impeller rotates at different angles. The results show that the pressure pulsation in the single-channel pump volute is induced by the rotor-stator interaction and its harmonics. The monitoring points close to the separation tongue along the rotation direction of the impeller are more affected by the flow rate.

The increased oxygen vacancy by morphology regulation of MnO2 for efficient removal of PAHs in aqueous solution.

Manganese dioxide (MnO2) is considered to have a promising future in degrading polycyclic aromatic hydrocarbons (PAHs) in aqueous phase because of its low cost and environmental friendliness. In this study, various MnO2 morphologies were prepared, and their removal performance and mechanism were evaluated using benzo(a)pyrene (B[a]P) as model molecule. Results showed that nanoflower MnO2 with higher concentration of oxygen vacancies exhibited better oxidative and easier oxygen migration properties, and thus enhanced PAHs removal by 14.28%-43.21% compared with other MnO2 samples. Additionally, the transformation rate of PAHs is correlated with their ionization potential (IP) values. Further mechanism studies showed that the degradation of B[a]P by MnO2 process was first to form a combination and then oxidized by non-radical Mn species and superoxide radical (O2-•) to produce degradation product (B[a]P-6-one and B[a]P-6,12-quinone). The specific surface area was not the main factor affecting the removal of B[a]P by MnO2 and oxidation was the main removal mechanism of degrading B[a]P by MnO2. Mn3+ and absorbed oxygen (Oabs) played an important role in the process of removing PAHs by MnO2. Additionally, synergistic effects of oxygen vacancy and Mn3+could be benefit for transforming Oabs to O2-•, leading to the efficient degradation of PAHs.

Transformation and toxicity dynamics of polycyclic aromatic hydrocarbons in a novel biological-constructed wetland-microalgal wastewater treatment process.

In this study, a novel wastewater treatment process combining sequencing batch reactor, constructed wetland and microalgal membrane photobioreactor (BCM process) was proposed, and its performance on removal, transformation and toxicity reduction of polycyclic aromatic hydrocarbons (PAHs) was intensively explored. Satisfactory PAHs removal (90.58%-97.50%) was achieved and molecular weight had significant impact on the removal pathways of different PAHs. Adsorption dominated the removal of high molecular weight PAHs, while the contribution ratio of microbial degradation increased with the decrease of molecular weight of PAHs. More importantly, it was reported for the first time that substituted PAHs (SPAHs) produced by microbial degradation of PAHs would lead to increased toxicity during the BCM process. High PAHs (75.37%-88.52%) and SPAHs removal (99.56%-100.00%) were achieved in the microalgae unit due to its abundant cytochrome P450 enzyme, which decreased the bacterial toxicity by 90.93% and genotoxicity by 93.08%, indicating that microalgae played significance important role in ensuring water security. In addition, the high quantitative relationship (R2 = 0.98) between PAHs, SPAHs and toxicity exhibited by regression model analysis proved that more attention should be paid to the ecotoxicity of derivatives of refractory organic matters in wastewater treatment plants.

Antifungal and Antibiofilm Efficacy of Paeonol Treatment Against Biofilms Comprising Candida albicans and/or Cryptococcus neoformans.

Fungal populations are commonly found in natural environments and present enormous health care challenges, due to increased resistance to antifungal agents. Paeonol exhibits antifungal activities; nevertheless, the antifungal and antibiofilm activities of paeonol against Candida albicans and Cryptococcus neoformans remain largely unexplored. Here, we aimed to evaluate the antifungal and antibiofilm activities of paeonol against C. albicans and/or C. neoformans (i.e., against mono- or dual-species). The minimum inhibitory concentrations (MICs) of paeonol for mono-species comprising C. albicans or C. neoformans were 250 µg ml-1, whereas the MIC values of paeonol for dual-species were 500 µg ml-1. Paeonol disrupted cell membrane integrity and increased the influx of gatifloxacin into cells of mono- and dual-species cells, indicating an antifungal mode of action. Moreover, paeonol at 8 times the MIC damaged mono- and dual-species cells within C. albicans and C. neoformans biofilms, as it did planktonic cells. In particular, at 4 and 8 mg ml-1, paeonol efficiently dispersed preformed 48-h biofilms formed by mono- and dual-species cells, respectively. Paeonol inhibited effectively the yeast-to-hyphal-form transition of C. albicans and impaired capsule and melanin production of C. neoformans. The addition of 10 MIC paeonol to the medium did not shorten the lifespan of C. elegans, and 2 MIC paeonol could effectively protect the growth of C. albicans and C. neoformans-infected C. elegans. Furthermore, RNA sequencing was employed to examine the transcript profiling of C. albicans and C. neoformans biofilm cells in response to 1/2 MIC paeonol. RNA sequencing data revealed that paeonol treatment impaired biofilm formation of C. albicans by presumably downregulating the expression level of initial filamentation, adhesion, and growth-related genes, as well as biofilm biosynthesis genes, whereas paeonol inhibited biofilm formation of C. neoformans by presumably upregulating the expression level of ergosterol biosynthesis-related genes. Together, the findings of this study indicate that paeonol can be explored as a candidate antifungal agent for combating serious single and mixed infections caused by C. albicans and C. neoformans.

Nitrogen-doped mesoporous carbon supported CuSb for electroreduction of CO2.

The construction of an efficient catalyst for electrocatalytic reduction of CO2 to high value-added fuels has received extensive attention. Herein, nitrogen-doped mesoporous carbon (NMC) was used to support CuSb to prepare a series of materials for electrocatalytic reduction of CO2 to CH4. The catalytic activity of the composites was significantly improved compared with that of Cu/NMC. In addition, the Cu content also influenced the activity of electrocatalytic CO2 reduction reaction. Among the materials used, the CuSb/NMC-2 (Cu: 5.9 wt%, Sb: 0.49 wt%) catalyst exhibited the best performance for electrocatalytic CO2 reduction, and the faradaic efficiency of CH4 reached 35%, and the total faradaic efficiency of C1-C2 products reached 67%.

Simultaneously enhanced removal of PAHs and nitrogen driven by Fe2+/Fe3+ cycle in constructed wetland through automatic tidal operation.

The lack of dissolved oxygen and weak substrate removal capacity in constructed wetlands (CW) leads to terrible removal of nitrogen and polycyclic aromatic hydrocarbons (PAHs). In this study, automatic tidal flow CW microcosms were constructed by improving the oxygen environment (siphon and air-duct) and substrate (magnetite) to enhance purification performance and the mechanism was explored. The results showed that the addition of air-duct could improve the oxygen collection and thus improved the NH4+ removal efficiency. Additionally, nitrogen removal was improved greatly due to the simultaneous nitrification and denitrification in aerobic layer with the addition of magnetite. Mass balance indicated the microbial degradation dominated (32-62%) the removal of PAHs. Metagenomic analysis proved the existence of magnetite enhanced the number of PAHs-degrading bacteria, functional groups and metabolic pathways and thus greatly improved the microbial degradation of PAHs. Furthermore, Fe2+/Fe3+ cycle played an important role in promoting the anaerobic degradation of PAHs, which might be served as an electron conduit to establish the direct interspecies electron transfer between iron-reducing bacteria (e.g. Deltaproteobacteria bacterium) and Anaerolineae bacterium to degrade PAHs efficiently. This study provided better understanding of the simultaneous removal of PAHs and nitrogen in tidal flow CWs.