High power, broad tuning quantum cascade laser at λ ∼ 8.9 µm.

Many molecules have broad fingerprint absorption spectra in mid-wave infrared range which requires broadly tunable lasers to cover the interested spectrum in one scan. We report a strain-balanced, InAlAs/InGaAs/InP quantum cascade laser structure based on diagonal transition active region with high output power and and wide tuning range at λ ∼ 8.9 µm. The maximum pulsed optical power and the wall-plug efficiency at room temperature are 4 W and 11.7%, respectively. Maximum continuous wave double-facet power is 1.2 W at 25 °C for a 4 mm by 9 µm laser mounted epi-side down on a diamond/copper composite submount. The maximum pulsed and continuous wave external-cavity tuning range are from 7.71 µm to 9.15 µm and from 8 µm to 8.9 µm, respectively. The continuous wave power of the external cavity mode exceeds 200 mW across the entire spectrum.

High-power, continuous-wave, phase-locked quantum cascade laser arrays emitting at 8 µm.

We report a room-temperature eight-element phase-locked quantum cascade laser array emitting at 8 µm with a high continuous-wave power of 8.2 W and wall plug efficiency of 9.5%. The laser array operates primarily via the in-phase supermode and has single-mode emission with a side-mode suppression ratio of ~20 dB. The quantum cascade laser active region is based on a high differential gain (8.7 cm/kA) and low voltage defect (90 meV) design. A record high wall plug efficiency of 20.4% is achieved from a low loss buried ridge type single-element Fabry-Perot laser operating in pulsed mode at 20 °C.

Single-mode, high-power, mid-infrared, quantum cascade laser phased arrays.

We demonstrate single-mode, 16-channel, optical phased arrays based on quantum cascade laser technology, with emission wavelengths around 4.8 µm. The integrated device consists of a distributed feedback seed section, a highly-efficient tree array multi-mode interferometer power splitter, and a 16-channel amplifier array with a 4° angled facet termination. With a single layer Y2O3 coating, the angled facet reflectivity is estimated to be less than 0.1% for suppressing amplifier self-lasing. A peak output power of 30 W is achieved with an emission spectrum narrower than 11 nm and a side mode suppression ratio over 25 dB. Far field distribution measurement result indicates a uniform phase distribution across the array output. Using the same phased array architecture, we also demonstrate single-mode 3.8 µm QCL amplifier arrays with up to 20 W output power.

Recent progress of quantum cascade laser research from 3 to 12 µm at the Center for Quantum Devices [Invited].

The quantum cascade laser (QCL) is becoming the leading laser source in the mid-infrared (mid-IR) range, which contains two atmospheric transmission windows and many molecular fingerprint absorption features. Since its first demonstration in 1994, the QCL has undergone tremendous development in terms of the output power, wall plug efficiency, wavelength coverage, tunability and beam quality. At the Center for Quantum Devices, we have demonstrated high-power continuous wave operation of QCLs covering a wide wavelength range from 3 to 12 µm, with power output up to 5.1 W at room temperature. Recent research has resulted in power scaling in pulsed mode with up to 203 W output, electrically tunable QCLs based on monolithic sampled grating design, heterogeneous QCLs with a broad spectral gain, broadly tunable on-chip beam-combined QCLs, QCL-based mid-IR frequency combs, and fundamental mode surface emitting quantum cascade ring lasers. The developed QCLs will be the basis for a number of next-generation spectroscopy and sensing systems.

Holographic fabricated photonic-crystal distributed-feedback quantum cascade laser with near-diffraction-limited beam quality.

We demonstrate the fabrication and characterization of photonic-crystal distributed-feedback quantum cascade laser emitting at 4.7 microm. The tilted rectangular-lattice PCDFB structure was defined using a multi-exposure of two-beam holographic lithography. The devices exhibit the near-diffraction-limited beam emission with the full width at half maximum of the far-field divergence angles about 4.5 degrees and 2.5 degrees for stripe widths of 55 microm and 95 microm, respectively. Single-mode emission with a side mode suppression ratio of approximately 20 dB is achieved in the temperature range (80-210 K). The single-facet output power is above 1 W for a 95 microm x 2.5 mm laser bar at 85 K in pulsed operation.