Dissolution Mechanisms of Amorphous Solid Dispersions: Application of Ternary Phase Diagrams To Explain Release Behavior.

The use of amorphous solid dispersions (ASDs) in commercial drug products has increased in recent years due to the large number of poorly soluble drugs in the pharmaceutical pipeline. However, the release behavior of ASDs is complex and remains not well understood. Often, the drug release from ASDs is rapid and complete at lower drug loadings (DLs) but becomes slow and incomplete at higher DLs. The DL where release becomes hindered is termed the limit of congruency (LoC). Currently, there are no approaches to predict the LoC. However, recent findings show that one potential cause leading to the LoC is a change in phase morphology after water-induced phase separation at the ASD/solution interface. In this study, the phase behavior of ASDs in contact with aqueous solutions was described thermodynamically by constructing experimental and computational ternary phase diagrams, and these were used to predict morphology changes and ultimately the LoC. Experimental ternary phase diagrams were obtained by equilibrating ASD/water mixtures over time. Computational ternary phase diagrams were obtained by Perturbed Chain Statistical Associating Fluid Theory (PC-SAFT). The morphology of the hydrophobic phase was studied with fluorescence confocal microscopy. It was demonstrated that critical point (plait point) composition approximately corresponded to the ASD DL, where the hydrophobic phase, formed during phase separation, became interconnected and hindered ASD release. This work provides mechanistic insights into the ASD release behavior and highlights the potential of in silico ASD design using phase diagrams.

Development of Ternary Amorphous Solid Dispersions Manufactured by Hot-Melt Extrusion and Spray-Drying─Comparison of In Vitro and In Vivo Performance.

Producing amorphous solid dispersions (ASDs) by hot-melt extrusion (HME) is favorable from an economic and ecological perspective but also limited to thermostable active pharmaceutical ingredients (APIs). A potential technology shift from spray-drying to hot-melt extrusion at later stages of drug product development is a desirable goal, however bearing the risk of insufficient comparability of the in vitro and in vivo performance of the final dosage form. Hot-melt extrusion was performed using API/polymer/surfactant mixtures with hydroxypropyl methylcellulose acetate succinate (HPMCAS) as the polymer and evaluated regarding the extrudability of binary and ternary amorphous solid dispersions (ASDs). Additionally, spray-dried ASDs were produced, and solid-state properties were compared to the melt-extruded ASDs. Tablets were manufactured of a ternary ASD lead candidate comparing their in vitro dissolution and in vivo performance. The extrudability of HPMCAS was improved by adding a surfactant as plasticizer, thereby lowering the high melt-viscosity. d-α-Tocopheryl polyethylene glycol succinate (TPGS) as surfactant showed the most similar solid-state properties between spray-dried and extruded ASDs compared to those of poloxamer 188 and sodium dodecyl sulfate. The addition of TPGS, however, barely affected API/polymer interactions. The in vitro dissolution experiment and in vivo dog study revealed a higher drug release of tablets manufactured from the spray-dried ASD compared to the melt-extruded ASD; this was attributed to the different particle size. We could further demonstrate that the drug release can be controlled by adjusting the particle size of melt-extruded ASDs leading to a similar release profile compared to tablets containing the spray-dried dispersion, which confirmed the feasibility of a technology shift from spray-drying to HME upon drug product development.

The shelf life of ASDs: 2. Predicting the shelf life at storage conditions.

Amorphous solid dispersions (ASDs) are a widely used formulation technology for poorly water-soluble active pharmaceutical ingredients (API). Depending on the API-polymer combination and API load in the ASD, the amorphous API might be thermodynamically metastable and crystallize over time. The crystallization onset is one critical factor that can define the shelf life of the ASD. Thus, for ASD formulations, long-term stability against crystallization of the API is of particular interest. This work presents a method for predicting the long-term physical stability of ASDs (crystallization onset time). The new approach combines the Johnson-Mehl-Avrami-Kolmogorov (JMAK) equation with classical nucleation theory. The shelf life predicted using the new approach depends on supersaturation (determined with PC-SAFT), viscosity (determined with WLF equation or Arrhenius equation) and two specific model parameters k' and B. The latter were fitted to a few fast crystallization-kinetics measurements above the glass transition of the ASD. An additional crystallization-kinetics measurement below the glass-transition temperature of the ASD was used to determine the Arrhenius parameters. Once all parameters are determined for a given API/polymer combination and manufacturing method, they are valid for any API load, temperature, and RH. The proposed approach allows predicting the shelf life (crystallization onset) of a potential ASD in early stage of development within a few days. It was successfully verified for ASDs stored at 25 °C and 10% RH or 60% RH.

Tailored ASD destabilization - Balancing shelf life stability and dissolution performance with hydroxypropyl cellulose.

Amorphous solid dispersion (ASD) formulations are preferred enabling formulations for poorly water soluble active pharmaceutical ingredients (API) as they reliably enhance the dissolution behavior and solubility. Balancing a high stability against unwanted transformations such as crystallization and amorphous phase separation during storage on the one hand and optimizing the dissolution behavior of the formulation (high supersaturation and maintenance for long time) on the other hand are essential during formulation development. This study assessed the potential of ternary ASDs (one API and two polymers) containing the polymers hydroxypropyl cellulose together with poly(vinylpyrrolidone-co-vinyl acetate) (PVP VA64) or hydroxypropyl cellulose acetate succinate to stabilize the amorphously embedded APIs fenofibrate and simvastatin during storage and to enhance the dissolution performance. Thermodynamic predictions using the PC-SAFT model revealed for each combination of polymers the optimal polymer ratio, maximum API load that is thermodynamically stable as well as miscibility of the two polymers. The stability predictions were validated by three months enduring stability tests, followed by a characterization of the dissolution behavior. The thermodynamically most stable ASDs were found to be the ASDs with deteriorated dissolution performance. Within the investigated polymer combinations, physical stability and dissolution performance opposed each other.

The Shelf Life of ASDs: 1. Measuring the Crystallization Kinetics at Humid Conditions.

Amorphous solid dispersions (ASDs), where an active pharmaceutical ingredient (API) is dissolved in a polymer, are a favored formulation technique to achieve sufficient bioavailability of poorly water-soluble APIs. The shelf life of such ASDs is often limited by API crystallization. Crystallization depends strongly on the storage conditions (relative humidity and temperature) and the polymer selected for generating the ASD. Determining the crystallization kinetics of ASDs under various conditions requires suitable analytical methods. In this work, two different analytical methods were compared and cross-validated: The first builds on water-sorption measurements combined with thermodynamic predictions ( Eur. J. Pharm. Biopharm. 2018, 127, 183-193, DOI: 10.1016/j.toxrep.2018.11.002), whereas the second applies Raman spectroscopy. Using the two independent methods, factors influencing the crystallization kinetics of ASDs containing the API griseofulvin were investigated quantitatively. It was found that crystallization kinetics increases with increasing temperature and relative humidity. Additionally, the influence of different polymers (poly(vinylpyrrolidone-co-vinyl acetate) and Soluplus) on crystallization kinetics were investigated. The experimentally obtained crystallization kinetics were described using the Johnson-Mehl-Avrami-Kolmogorov model and are the basis for future shelf life predictions at desired storage conditions.

Factors Influencing the Crystallization-Onset Time of Metastable ASDs.

In formulation development, amorphous solid dispersions (ASD) are considered to improve the bioavailability of poorly water-soluble active pharmaceutical ingredients (APIs). However, the crystallization of APIs often limits long-term stability and thus the shelf life of ASDs. It has already been shown earlier that the long-term stability of ASDs strongly depends on the storage conditions (relative humidity, temperature), the manufacturing methods, and the resulting particle sizes. In this work, ASDs composed of the model APIs Griseofulvin (GRI) or Itraconazole (ITR) and the polymers poly (vinylpyrrolidone-co-vinyl acetate) (PVPVA) or Soluplus® were manufactured via spray drying and hot-melt extrusion. Each API/polymer combination was manufactured using the two manufacturing methods with at least two different API loads and two particle-size distributions. It was a priori known that these ASDs were metastable and would crystallize over time, even in the dry stage. The amount of water absorbed by the ASD from humid air (40 °C/75% relative humidity), the solubility of the API in the ASD at humid conditions, and the resulting glass-transition temperature were predicted using the Perturbed-Chain Statistical Associating Fluid Theory (PC-SAFT) and the Gordon-Taylor approach, respectively. The onset of crystallization was determined via periodic powder X-ray diffraction (PXRD) measurements. It was shown that simple heuristics such as "larger particles always crystallize later than smaller particles" are correct within one manufacturing method but cannot be transferred from one manufacturing method to another. Moreover, amorphous phase separation in the ASDs was shown to also influence their crystallization kinetics. Counterintuitively, phase separation accelerated the crystallization time, which could be explained by the glass-transition temperatures of the evolving phases.

Swelling and Diffusion in Polymerized Ionic Liquids-Based Hydrogels.

Hydrogels are one of the emerging classes of materials in current research. Besides their numerous applications in the medical sector as a drug delivery system or in tissue replacement, they are also suitable as irrigation components or as immobilization matrices in catalysis. For optimal application of these compounds, knowledge of the swelling properties and the diffusion mechanisms occurring in the gels is mandatory. This study is focused on hydrogels synthesized by radical polymerization of imidazolium-based ionic liquids. Both the swelling and diffusion behavior of these hydrogels were investigated via gravimetric swelling as well as sorption experiments implemented in water, ethanol, n-heptane, and tetrahydrofuran. In water and ethanol, strong swelling was observed while the transport mechanism deviated from Fickian-type behavior. By varying the counterion and the chain length of the cation, their influences on the processes were observed. The calculation of the diffusion coefficients delivered values in the range of 10-10 to 10-12 m2 s-1. The gravimetric results were supported by apparent diffusion coefficients measured through diffusion-weighted magnetic resonance imaging. A visualization of the water diffusion front within the hydrogel should help to further elucidate the diffusion processes in the imidazolium-based hydrogels.

Predicting Deliquescence Relative Humidities of Crystals and Crystal Mixtures.

The presence of water in the form of relative humidity (RH) may lead to deliquescence of crystalline components above a certain RH, the deliquescence RH (DRH). Knowing the DRH values is essential, e.g., for the agrochemical industry, food industry, and pharmaceutical industry to identify stability windows for their crystalline products. This work applies the Perturbed-Chain Statistical Associating Fluid Theory (PC-SAFT) to purely predict the DRH of single components (organic acids, sugars, artificial sweeteners, and amides) and multicomponent crystal mixtures thereof only based on aqueous solubility data of the pure components. The predicted DRH values very well agree with the experimental ones. In addition, the temperature influence on the DRH value could be successfully predicted with PC-SAFT. The DRH prediction also differentiates between formation of hydrates and anhydrates. PC-SAFT-predicted phase diagrams of hydrate-forming components illustrate the influence of additional components on the hydrate formation as a function of RH. The DRH prediction via PC-SAFT allows for the determining of the stability of crystals and crystal mixtures without the need for time-consuming experiments.

Predicting process design spaces for spray drying amorphous solid dispersions.

Amorphous solid dispersions (ASDs) are commonly manufactured using spray-drying processes. The product quality can be decisively influenced by the choice of process parameters. Following the quality-by-design approach, the identification of the spray-drying process design space is thus an integral task in drug product development. Aiming a solvent-free and homogeneous ASD, API crystallization and amorphous phase separation needs to be avoided during drying. This publication provides a predictive approach for determining spray-drying process conditions via considering thermodynamic driving forces for solvent drying as well as ASD-specific API/polymer/solvent interactions and glass transitions. The ternary API/polymer/solvent phase behavior was calculated using the Perturbed-Chain Statistical Associating Theory (PC-SAFT) and combined with mass and energy balances to find appropriate spray-drying conditions. A process design space was identified for the ASDs of ritonavir and naproxen with either poly(vinylpyrrolidone) or poly(vinylpyrrolidone-co-vinylacetate) spray dried from the solvents acetone, dichloromethane, or ethanol.

Stability of Pharmaceutical Co-Crystals at Humid Conditions Can Be Predicted.

Knowledge of the stability of pharmaceutical formulations against relative humidity (RH) is essential if they are to become pharmaceutical products. The increasing interest in formulating active pharmaceutical ingredients as stable co-crystals (CCs) triggers the need for fast and reliable in-silico predictions of CC stability as a function of RH. CC storage at elevated RH can lead to deliquescence, which leads to CC dissolution and possible transformation to less soluble solid-state forms. In this work, the deliquescence RHs of the CCs succinic acid/nicotinamide, carbamazepine/nicotinamide, theophylline/citric acid, and urea/glutaric acid were predicted using the Perturbed-Chain Statistical Associating Fluid Theory (PC-SAFT). These deliquescence RH values together with predicted phase diagrams of CCs in water were used to determine critical storage conditions, that could lead to CC instability, that is, CC dissolution and precipitation of its components. The importance of CC phase purity on RH conditions for CC stability is demonstrated, where trace levels of a separate phase of active pharmaceutical ingredient or of coformer can significantly decrease the deliquescence RH. The use of additional excipients such as fructose or xylitol was predicted to decrease the deliquescence RH even further. All predictions were successfully validated by stability measurements at 58%, 76%, 86%, 93%, and 98% RH and 25 °C.

Influence of bound dodecanoic acid on the reconstitution of albumin nanoparticles from a lyophilized state.

The development of reference standards for nanoparticle sizing allows for cross laboratory studies and effective transfer of particle sizing methodology. To facilitate this, these reference standards must be stable upon long-term storage. Here, we examine factors that influence the properties of cross-linked albumin nanoparticles, fabricated with an ethanol desolvation method, when reconstituted from a lyophilized state. We demonstrate, with nanoparticle tracking analysis, no significant changes in mean particle diameter upon reconstitution of albumin nanoparticles fabricated with bovine serum albumin loaded with dodecanoic acid, when compared to nanoparticles fabricated with a fatty acid-free BSA. We attribute this stability to the modulation of nanoparticle charge-charge interactions at dodecanoic acid specific binding locations. Furthermore, we demonstrate this in a lyophilized state over six months when stored at - 80 °C. We also show that the reconstitution process is readily transferable between technicians and laboratories and further confirm our finding with dynamic light scattering analysis.

Hollow-fiber bioreactor production of extracellular vesicles from human bone marrow mesenchymal stromal cells yields nanovesicles that mirrors the immuno-modulatory antigenic signature of the producer cell.

BACKGROUND: Extracellular vesicles (EVs) produced by human bone marrow-derived mesenchymal stromal cells (hBM-MSCs) are currently investigated for their clinical effectiveness towards immune-mediated diseases. The large amounts of stem cell-derived EVs required for clinical testing suggest that bioreactor production systems may be a more amenable alternative than conventional EV production methods for manufacturing products for therapeutic use in humans. METHODS: To characterize the potential utility of these systems, EVs from four hBM-MSC donors were produced independently using a hollow-fiber bioreactor system under a cGMP-compliant procedure. EVs were harvested and characterized for size, concentration, immunophenotype, and glycan profile at three separate intervals throughout a 25-day period. RESULTS: Bioreactor-inoculated hBM-MSCs maintained high viability and retained their trilineage mesoderm differentiation capability while still expressing MSC-associated markers upon retrieval. EVs collected from the four hBM-MSC donors showed consistency in size and concentration in addition to presenting a consistent surface glycan profile. EV surface immunophenotypic analyses revealed a consistent low immunogenicity profile in addition to the presence of immuno-regulatory CD40 antigen. EV cargo analysis for biomarkers of immune regulation showed a high abundance of immuno-regulatory and angiogenic factors VEGF-A and IL-8. CONCLUSIONS: Significantly, EVs from hBM-MSCs with immuno-regulatory constituents were generated in a large-scale system over a long production period and could be frequently harvested with the same quality and quantity, which will circumvent the challenge for clinical application.

Predicting the API partitioning between lipid-based drug delivery systems and water.

Partitioning tests in water are early-stage standard experiments during the development of pharmaceutical formulations, e.g. of lipid-based drug delivery system (LBDDS). The partitioning behavior of the active pharmaceutical ingredient (API) between the fatty phase and the aqueous phase is a key property, which is supposed to be determined by those tests. In this work, we investigated the API partitioning between LBDDS and water by in-silico predictions applying the Perturbed-Chain Statistical Associating Fluid Theory (PC-SAFT) and validated these predictions experimentally. The API partitioning was investigated for LBDDS comprising up to four components (cinnarizine or ibuprofen with tricaprylin, caprylic acid, and ethanol). The influence of LBDDS/water mixing ratios from 1/1 up to 1/200 (w/w) as well as the influence of excipients on the API partitioning was studied. Moreover, possible API crystallization upon mixing the LBDDS with water was predicted. This work showed that PC-SAFT is a strong tool for predicting the API partitioning behavior during in-vitro tests. Thus, it allows rapidly assessing whether or not a specific LBDDS might be a promising candidate for further in-vitro tests and identifying the API load up to which API crystallization can be avoided.

Phase behavior of ASDs based on hydroxypropyl cellulose.

Novel polymeric carriers for amorphous solid dispersions (ASDs) are highly demanded in pharmaceutical industry to improve the bioavailability of poorly-soluble drug candidates. Besides established polymer candidates, hydroxypropyl celluloses (HPC) comes more and more into the focus of ASD production since they have the availability to stabilize drug molecules in aqueous media against crystallization. The thermodynamic long-term stability of HPC ASDs with itraconazole and fenofibrate was predicted in this work with PC-SAFT and compared to three-months enduring long-term stability studies. The glass-transition temperature is a crucial attribute of a polymer, but in case of HPC hardly detectable by differential scanning calorimetry. By investigating the glass transition of HPC blends with a miscible polymer, we were for the first time able to estimate the HPC glass transition. Although both, fenofibrate and itraconazole reveal a very low crystalline solubility in HPC regardless of the HPC molecular weight, we observed that low-molecular weight HPC grades such as HPC-UL prevent fenofibrate crystallization for a longer period than the higher molecular weight HPC grades. As predicted, the ASDs with higher drug load underwent amorphous phase separation according to the differential scanning calorimetry thermograms. This work thus showed that it is possible to predict critical drug loads above which amorphous phase separation and/or crystallization occurs in HPC ASDs.

Combining crystalline and polymeric excipients in API solid dispersions - Opportunity or risk?

Amorphous solid dispersions (ASDs) are often metastable against crystallization of the active pharmaceutical ingredient (API) and thus might undergo unwanted changes during storage. The crystallization tendency of ASDs is influenced by the API crystallization driving force (CDF) and the mobility of the molecules in the ASD. Low molecular weight-excipients are known to stabilize amorphous APIs in so-called co-amorphous formulations. Due to their success in stabilizing co-amorphous APIs, low-molecular weight excipients might also enhance the stability of polymeric ASDs. In this work, we investigated the potential of combined low-molecular weight excipient/polymer formulations with in-silico tools and validated the predictions with long-term stability tests of the most promising excipient/polymer combinations. The considered critical quality attributes for the ASDs were the occurrence of amorphous phase separation, API CDF, and molecular mobility in the ASD. As an example, carbamazepine/polyvinylpyrrolidone ASDs were investigated combined with the excipients fructose, lactose, sucrose, trehalose, saccharin, tryptophan, and urea. Although all excipients had a negative impact on the ASD stability, saccharin still turned out to be the most promising one. Long-term stability studies with ASDs containing either saccharin or tryptophan verified -in agreement to the predictions- that API crystallization occurred faster than in the reference ASDs without additional excipient. This work showed that the addition of crystalline excipients to polymeric ASDs might not only offer opportunities but might also bear risks for the long-term stability of the ASD, even though the crystalline excipient stabilizes the polymer-free API. Consequently, excipients should be evaluated based on the thermodynamic phase behavior of the individual mixture of API/polymer/excipient, rather than based on pure-component properties of the excipient only. In-silico predictions proposed in this work remarkably decrease the number of screening tests for identifying suitable formulation excipients.

Solvent influence on the phase behavior and glass transition of Amorphous Solid Dispersions.

Understanding the long-term stability of amorphous solid dispersions (ASDs) is important for their successful approval for market. ASD stability does not only depend on the interplay between the active pharmaceutical ingredient (API) and the polymer in the final formulation but may already be disadvantageously influenced by process steps during the production (e.g. selection of inappropriate solvent for spray drying). Residual solvent can affect the API solubility in the polymer, molecular mobility (by influencing the glass-transition temperature) and induce liquid-liquid phase separation. Enhanced mobility in the ASD due to residual solvent can promote recrystallization in ASDs. The removal of residual solvent can be expensive, time-consuming, and usually requires secondary drying procedures to fulfil the regulatory requirements. The aim of this work is to predict the API solubility in polymer-solvent mixtures, solvent influence on the glass transition, and the occurrence of liquid-liquid phase separation of solvent-loaded ASDs using the thermodynamic model PC-SAFT and to experimentally validate these predictions. ASDs containing the APIs ritonavir or naproxen and the polymers poly(vinylpyrrolidone), poly (vinylpyrrolidone-co-vinyl acetate), or hydroxypropyl methylcellulose acetate succinate were spray-dried using the solvents acetone, ethanol, and dichloromethane. API solubility, sorption behavior, liquid-liquid phase separation and glass transition in the ternary API/polymer/solvent mixtures were predicted based on the binary phase behavior between API/solvent, API/polymer, and polymer/solvent and successfully validated experimentally using dynamic vapor sorption (DVS), and Raman spectroscopy. Thus, the presented methodology allows for an in-silico selection of appropriate solvent systems for solvent-based ASD preparation based on a limited amount of experimental data for binary systems only.

In-Silico Screening of Lipid-Based Drug Delivery Systems.

PURPOSE: This work proposes an in-silico screening method for identifying promising formulation candidates in complex lipid-based drug delivery systems (LBDDS). METHOD: The approach is based on a minimum amount of experimental data for API solubilites in single excipients. Intermolecular interactions between APIs and excipients as well as between different excipients were accounted for by the Perturbed-Chain Statistical Associating Fluid Theory. The approach was applied to the in-silico screening of lipid-based formulations for ten model APIs (fenofibrate, ibuprofen, praziquantel, carbamazepine, cinnarizine, felodipine, naproxen, indomethacin, griseofulvin and glibenclamide) in mixtures of up to three out of nine excipients (tricaprylin, Capmul MCM, caprylic acid, Capryol™ 90, Lauroglycol™ FCC, Kolliphor TPGS, polyethylene glycol, carbitol and ethanol). RESULTS: For eight out of the ten investigated model APIs, the solubilities in the final formulations could be enhanced by up to 100 times compared to the solubility in pure tricaprylin. Fenofibrate, ibuprofen, praziquantel, carbamazepine are recommended as type I formulations, whereas cinnarizine and felodipine showed a distinctive solubility gain in type II formulations. Increased solubility was found for naproxen and indomethacin in type IIIb and type IV formulations. The solubility of griseofulvin and glibenclamide could be slightly enhanced in type IIIb formulations. The experimental validation agreed very well with the screening results. CONCLUSION: The API solubility individually depends on the choice of excipients. The proposed in-silico-screening approach allows formulators to quickly determine most-appropriate types of lipid-based formulations for a given API with low experimental effort. Graphical abstract.

Centrifugal microfluidic lab-on-a-chip system with automated sample lysis, DNA amplification and microarray hybridization for identification of enterohemorrhagic Escherichia coli culture isolates.

The development of technology for the rapid, automated identification of bacterial culture isolates can help regulatory agencies to shorten response times in food safety surveillance, compliance, and enforcement as well as outbreak investigations. While molecular methods such as polymerase chain reaction (PCR) enable the identification of microbial organisms with high sensitivity and specificity, they generally rely on sophisticated instrumentation and elaborate workflows for sample preparation with an undesirably high level of hands-on engagement. Herein, we describe the design, operation and performance of a lab-on-a-chip system integrating thermal lysis, PCR amplification and microarray hybridization on the same cartridge. The assay is performed on a centrifugal microfluidic platform that allows for pneumatic actuation of liquids during rotation, making it possible to perform all fluidic operations in a fully-automated fashion without the need for integrating active control elements on the microfluidic cartridge. The cartridge, which is fabricated from hard and soft thermoplastic polymers, is compatible with high-volume manufacturing (e.g., injection molding). Chip design and thermal interface were both optimized to ensure efficient heat transfer and allow for fast thermal cycling during the PCR process. The integrated workflow comprises 14 steps and takes less than 2 h to complete. The only manual steps are related to loading of the sample and reagents on the cartridge as well as fluorescence imaging of the microarray. On-chip lysis and PCR amplification both provided results comparable to those obtained by bench-top instrumentation. The microarray, incorporating a panel of oligonucleotide probes for multiplexed detection of seven enterohemorrhagic E. coli priority serotypes, was implemented on a cyclic olefin copolymer substrate using a novel activation scheme that involves the conversion of hydroxyl groups (derived from oxygen plasma treatment) into reactive cyanate ester using cyanogen bromide. On-chip hybridization was demonstrated in a non-quantitative fashion using fluorescently-labelled gene markers for E. coli O157:H7 (rfbO157, eae, vt1, and vt2) obtained through a multiplexed PCR amplification step.

Viscosity of ASDs at humid conditions.

Many amorphous solid dispersions (ASDs) are thermodynamically unstable. Thus, the active pharmaceutical ingredient (API) might crystallize over time. The crystallization kinetics and therewith the long-term stability of ASDs depends on the storage conditions temperature and relative humidity (RH) as they determine the molecular mobility of the API in the polymer. To quantify the molecular mobility, the rheological behavior of two different ASDs with ibuprofen and either poly(vinyl acetate) or poly(vinylpyrrolidone-co-vinyl acetate) was analyzed as function of temperature and relative humidity by means of an oscillatory rheometer. The plasticizing effect of ibuprofen and absorbed water on the zero-shear viscosity of the polymer could be fully explained by the reduction of the glass-transition temperature of the mixture compared to the one of the pure polymer. Moreover, this work proposes an approach to predict the zero-shear viscosity of an ASD based on only the temperature dependence of the zero-shear viscosity of the pure polymer as well as the predicted water content in the ASD at certain RH using the Perturbed-Chain Statistical Associating Fluid Theory (PC-SAFT).

Solubility of Pharmaceutical Ingredients in Natural Edible Oils.

Natural edible oils (NEOs) are common excipients for lipid-based formulations. Many of them are complex mixtures comprising hundreds of different triglycerides (TGs). One major challenge in developing lipid-based formulations is the variety in NEO compositions affecting the solubility of active pharmaceutical ingredients. In this work, solubilities of indomethacin (IND), ibuprofen (IBU), and fenofibrate (FFB) in soybean oil and in coconut oil were measured via differential scanning calorimetry, high-performance liquid chromatography, and Raman spectroscopy. Furthermore, this work proposes an approach that mimics NEOs using one key TG and models the API solubilities in these NEOs based on perturbed-chain statistical associating fluid theory (PC-SAFT). Key TGs were determined using the 1,2,3-random hypothesis, and PC-SAFT parameters were estimated via a group-contribution method. Using the proposed approach, the solubility of IBU and FFB was modeled in soybean oil and coconut oil. Furthermore, the solubilities of five more APIs (IND, cinnarizine, naproxen, griseofulvin, and felodipine) were modeled in soybean oil. All modeling results were found in very good agreement with the experimental data. The influence of different NEO kinds on API solubility was examined by comparing FFB and IBU solubilities in soybean oil and refined coconut oil. PC-SAFT was thus found to allow assessing the batch-to-batch consistency of NEO batches in silico.