Classification of skin blemishes with cell phone images using deep learning techniques.

Skin blemishes can be caused by multiple events or diseases and, in some cases, it is difficult to distinguish where they come from. Therefore, there may be cases with a dangerous origin that go unnoticed or the opposite case (which can lead to overcrowding of health services). To avoid this, the use of artificial intelligence-based classifiers using images taken with mobile devices is proposed; this would help in the initial screening process and provide some information to the patient prior to their final diagnosis. To this end, this work proposes an optimization mechanism based on two phases in which a global search for the best classifiers (from among more than 150 combinations) is carried out, and, in the second phase, the best candidates are subjected to a phase of evaluation of the robustness of the system by applying the cross-validation technique. The results obtained reach 99.95% accuracy for the best case and 99.75% AUC. Comparing the developed classifier with previous works, an improvement in terms of classification rate is appreciated, as well as in the reduction of the classifier complexity, which allows our classifier to be integrated in a specific purpose system with few computational resources.

A lightweight xAI approach to cervical cancer classification.

Cervical cancer is caused in the vast majority of cases by the human papilloma virus (HPV) through sexual contact and requires a specific molecular-based analysis to be detected. As an HPV vaccine is available, the incidence of cervical cancer is up to ten times higher in areas without adequate healthcare resources. In recent years, liquid cytology has been used to overcome these shortcomings and perform mass screening. In addition, classifiers based on convolutional neural networks can be developed to help pathologists diagnose the disease. However, these systems always require the final verification of a pathologist to make a final diagnosis. For this reason, explainable AI techniques are required to highlight the most significant data to the healthcare professional, as it can be used to determine the confidence in the results and the areas of the image used for classification (allowing the professional to point out the areas he/she thinks are most important and cross-check them against those detected by the system in order to create incremental learning systems). In this work, a 4-phase optimization process is used to obtain a custom deep-learning classifier for distinguishing between 4 severity classes of cervical cancer with liquid-cytology images. The final classifier obtains an accuracy over 97% for 4 classes and 100% for 2 classes with execution times under 1 s (including the final report generation). Compared to previous works, the proposed classifier obtains better accuracy results with a lower computational cost.

A Robust Ensemble of Convolutional Neural Networks for the Detection of Monkeypox Disease from Skin Images.

Monkeypox is a smallpox-like disease that was declared a global health emergency in July 2022. Because of this resemblance, it is not easy to distinguish a monkeypox rash from other similar diseases; however, due to the novelty of this disease, there are no widely used databases for this purpose with which to develop image-based classification algorithms. Therefore, three significant contributions are proposed in this work: first, the development of a publicly available dataset of monkeypox images; second, the development of a classification system based on convolutional neural networks in order to automatically distinguish monkeypox marks from those produced by other diseases; and, finally, the use of explainable AI tools for ensemble networks. For point 1, free images of monkeypox cases and other diseases have been searched in government databases and processed until we are left with only a section of the skin of the patients in each case. For point 2, various pre-trained models were used as classifiers and, in the second instance, combinations of these were used to form ensembles. And, for point 3, this is the first documented time that an explainable AI technique (like GradCAM) is applied to the results of ensemble networks. Among all the tests, the accuracy reaches 93% in the case of single pre-trained networks, and up to 98% using an ensemble of three networks (ResNet50, EfficientNetB0, and MobileNetV2). Comparing these results with previous work, a substantial improvement in classification accuracy is observed.

Smart Shoe Insole Based on Polydimethylsiloxane Composite Capacitive Sensors.

Nowadays, the study of the gait by analyzing the distribution of plantar pressure is a well-established technique. The use of intelligent insoles allows real-time monitoring of the user. Thus, collecting and analyzing information is a more accurate process than consultations in so-called gait laboratories. Most of the previous published studies consider the composition and operation of these insoles based on resistive sensors. However, the use of capacitive sensors could provide better results, in terms of linear behavior under the pressure exerted. This behavior depends on the properties of the dielectric used. In this work, the design and implementation of an intelligent plantar insole composed of capacitive sensors is proposed. The dielectric used is a polydimethylsiloxane (PDMS)-based composition. The sensorized plantar insole developed achieves its purpose as a tool for collecting pressure in different areas of the sole of the foot. The fundamentals and details of the composition, manufacture, and implementation of the insole and the system used to collect data, as well as the data samples, are shown. Finally, a comparison of the behavior of both insoles, resistive and capacitive sensor-equipped, is made. The prototype presented lays the foundation for the development of a tool to support the diagnosis of gait abnormalities.

Wearable Health Devices for Diagnosis Support: Evolution and Future Tendencies.

The use of wearable devices has increased substantially in recent years. This, together with the rise of telemedicine, has led to the use of these types of devices in the healthcare field. In this work, we carried out a detailed study on the use of these devices (regarding the general trends); we analyzed the research works and devices marketed in the last 10 years. This analysis extracted relevant information on the general trend of use, as well as more specific aspects, such as the use of sensors, communication technologies, and diseases. A comparison was made between the commercial and research aspects linked to wearables in the healthcare field, and upcoming trends were analyzed.

AnkFall-Falls, Falling Risks and Daily-Life Activities Dataset with an Ankle-Placed Accelerometer and Training Using Recurrent Neural Networks.

Falls are one of the leading causes of permanent injury and/or disability among the elderly. When these people live alone, it is convenient that a caregiver or family member visits them periodically. However, these visits do not prevent falls when the elderly person is alone. Furthermore, in exceptional circumstances, such as a pandemic, we must avoid unnecessary mobility. This is why remote monitoring systems are currently on the rise, and several commercial solutions can be found. However, current solutions use devices attached to the waist or wrist, causing discomfort in the people who wear them. The users also tend to forget to wear the devices carried in these positions. Therefore, in order to prevent these problems, the main objective of this work is designing and recollecting a new dataset about falls, falling risks and activities of daily living using an ankle-placed device obtaining a good balance between the different activity types. This dataset will be a useful tool for researchers who want to integrate the fall detector in the footwear. Thus, in this work we design the fall-detection device, study the suitable activities to be collected, collect the dataset from 21 users performing the studied activities and evaluate the quality of the collected dataset. As an additional and secondary study, we implement a simple Deep Learning classifier based on this data to prove the system's feasibility.

IoT garment for remote elderly care network.

The elderly is a continuous growth sector thanks to the life expectancy increase in Western society. This sector is especially at risk from the appearance of respiratory diseases and, therefore, is the most affected sector in the COVID-19 epidemic. Many of these elderly require continuous care in residences or by specialized caregivers, but these personal contacts put this sector at risk. In this work, an IoT system for elderly remote monitoring is studied, designed, developed and tested. This system is composed by a smart garment that records information from various physiological sensors in order to detect falls, sudden changes in body temperature, heart problems and heat stroke; This information is sent to a cloud server through a gateway located in the patient's residence, allowing to real-time monitor remotely patient's activity using a customized App, as well as receiving alerts in dangerous situations. This system has been tested with professional caregivers, obtaining usability and functionality surveys; and, in addition, a detailed power-consumption study has been carried out. The results, compared with other similar systems, demonstrate that the proposed one is useful, usable, works in real time and has a decent power consumption that allows the patient to carry it during all day without charging the battery.

Wearable Fall Detector Using Recurrent Neural Networks.

Falls have become a relevant public health issue due to their high prevalence and negative effects in elderly people. Wearable fall detector devices allow the implementation of continuous and ubiquitous monitoring systems. The effectiveness for analyzing temporal signals with low energy consumption is one of the most relevant characteristics of these devices. Recurrent neural networks (RNNs) have demonstrated a great accuracy in some problems that require analyzing sequential inputs. However, getting appropriate response times in low power microcontrollers remains a difficult task due to their limited hardware resources. This work shows a feasibility study about using RNN-based deep learning models to detect both falls and falls' risks in real time using accelerometer signals. The effectiveness of four different architectures was analyzed using the SisFall dataset at different frequencies. The resulting models were integrated into two different embedded systems to analyze the execution times and changes in the model effectiveness. Finally, a study of power consumption was carried out. A sensitivity of 88.2% and a specificity of 96.4% was obtained. The simplest models reached inference times lower than 34 ms, which implies the capability to detect fall events in real-time with high energy efficiency. This suggests that RNN models provide an effective method that can be implemented in low power microcontrollers for the creation of autonomous wearable fall detection systems in real-time.

Evaluation of user satisfaction and usability of a mobile app for smoking cessation.

BACKGROUND: Mobile apps have a great potential to support patients in healthcare, and to encourage healthy behavioral changes such as smoking cessation. Nevertheless, the user rejection levels are still high. A set of factors that has impact on the app effectiveness is related to the quality of those features that lead to positive user experiences when using the app. This work aims to evaluate the user experience, and more specifically the usability and the user satisfaction with a mobile application for smoking cessation. This will also provide a basis for future improvements. METHODS: We provided a smoking cessation mobile Android app to two different user cohorts, the smokers as valid users and the experts, for three weeks. The app featured usual functionalities to help quit smoking, including an achieved benefits section, mini-games to distract during cravings, and supportive motivational messages. We collected information about user experience, through game playability and message satisfaction questionnaires, and the experts' opinions. We also considered usage of app sections, the duration of the mini-game sessions, and the user ratings for motivational messages. RESULTS: We included 45 valid users and 25 experts in this study. The questionnaire indicated 80% satisfaction rate for the motivational messages. According to game questionnaires, over 69% of the participants agreed that the games have good usability features, however, for questions related to mobility and gameplay heuristics, agreements were below 67%. The most accessed app sections were achieved benefits and the one with motivational messages. The experts described issues that could help to improve the application. CONCLUSIONS: The combination of questionnaires with expert reports allowed to identify several problems and possible corrections. Our study showed that motivational messages have a good satisfaction rate, although it is necessary to consider technical features of some mobile devices that may hinder message reception. Games have good usability and it's expected that the addition of difficulty levels and a better accessibility to the game menu could make them more attractive and increase its usage. Future development of mHealth apps based on gamification and motivational messages need to consider these factors for better user satisfaction and usability.

Tailoring motivational health messages for smoking cessation using an mHealth recommender system integrated with an electronic health record: a study protocol.

BACKGROUND: Smoking is one of the most avoidable health risk factors, and yet the quitting success rates are low. The usage of tailored health messages to support quitting has been proved to increase quitting success rates. Technology can provide convenient means to deliver tailored health messages. Health recommender systems are information-filtering algorithms that can choose the most relevant health-related items-for instance, motivational messages aimed at smoking cessation-for each user based on his or her profile. The goals of this study are to analyze the perceived quality of an mHealth recommender system aimed at smoking cessation, and to assess the level of engagement with the messages delivered to users via this medium. METHODS: Patients participating in a smoking cessation program will be provided with a mobile app to receive tailored motivational health messages selected by a health recommender system, based on their profile retrieved from an electronic health record as the initial knowledge source. Patients' feedback on the messages and their interactions with the app will be analyzed and evaluated following an observational prospective methodology to a) assess the perceived quality of the mobile-based health recommender system and the messages, using the precision and time-to-read metrics and an 18-item questionnaire delivered to all patients who complete the program, and b) measure patient engagement with the mobile-based health recommender system using aggregated data analytic metrics like session frequency and, to determine the individual-level engagement, the rate of read messages for each user. This paper details the implementation and evaluation protocol that will be followed. DISCUSSION: This study will explore whether a health recommender system algorithm integrated with an electronic health record can predict which tailored motivational health messages patients would prefer and consider to be of a good quality, encouraging them to engage with the system. The outcomes of this study will help future researchers design better tailored motivational message-sending recommender systems for smoking cessation to increase patient engagement, reduce attrition, and, as a result, increase the rates of smoking cessation. TRIAL REGISTRATION: The trial was registered at clinicaltrials.org under the ClinicalTrials.gov identifier NCT03206619 on July 2nd 2017. Retrospectively registered.

Analyzing recommender systems for health promotion using a multidisciplinary taxonomy: A scoping review.

BACKGROUND: Recommender systems are information retrieval systems that provide users with relevant items (e.g., through messages). Despite their extensive use in the e-commerce and leisure domains, their application in healthcare is still in its infancy. These systems may be used to create tailored health interventions, thus reducing the cost of healthcare and fostering a healthier lifestyle in the population. OBJECTIVE: This paper identifies, categorizes, and analyzes the existing knowledge in terms of the literature published over the past 10 years on the use of health recommender systems for patient interventions. The aim of this study is to understand the scientific evidence generated about health recommender systems, to identify any gaps in this field to achieve the United Nations Sustainable Development Goal 3 (SDG3) (namely, "Ensure healthy lives and promote well-being for all at all ages"), and to suggest possible reasons for these gaps as well as to propose some solutions. METHODS: We conducted a scoping review, which consisted of a keyword search of the literature related to health recommender systems for patients in the following databases: ScienceDirect, PsycInfo, Association for Computing Machinery, IEEExplore, and Pubmed. Further, we limited our search to consider only English-language journal articles published in the last 10 years. The reviewing process comprised three researchers who filtered the results simultaneously. The quantitative synthesis was conducted in parallel by two researchers, who classified each paper in terms of four aspects-the domain, the methodological and procedural aspects, the health promotion theoretical factors and behavior change theories, and the technical aspects-using a new multidisciplinary taxonomy. RESULTS: Nineteen papers met the inclusion criteria and were included in the data analysis, for which thirty-three features were assessed. The nine features associated with the health promotion theoretical factors and behavior change theories were not observed in any of the selected studies, did not use principles of tailoring, and did not assess (cost)-effectiveness. DISCUSSION: Health recommender systems may be further improved by using relevant behavior change strategies and by implementing essential characteristics of tailored interventions. In addition, many of the features required to assess each of the domain aspects, the methodological and procedural aspects, and technical aspects were not reported in the studies. CONCLUSIONS: The studies analyzed presented few evidence in support of the positive effects of using health recommender systems in terms of cost-effectiveness and patient health outcomes. This is why future studies should ensure that all the proposed features are covered in our multidisciplinary taxonomy, including integration with electronic health records and the incorporation of health promotion theoretical factors and behavior change theories. This will render those studies more useful for policymakers since they will cover all aspects needed to determine their impact toward meeting SDG3.