RESUMO
This feature article discusses the optical trapping and manipulation of plasmonic nanoparticles, an area of current interest with potential applications in nanofabrication, sensing, analytics, biology and medicine. We give an overview over the basic theoretical concepts relating to optical forces, plasmon resonances and plasmonic heating. We discuss fundamental studies of plasmonic particles in optical traps and the temperature profiles around them. We place a particular emphasis on our own work employing optically trapped plasmonic nanoparticles towards nanofabrication, manipulation of biomimetic objects and sensing.
RESUMO
We report on the tuning of specific binding of DNA attached to gold nanoparticles at the individual particle pair (dimer) level in an optical trap by means of plasmonic heating. DNA hybridization events are detected optically by the change in the plasmon resonance frequency due to plasmonic coupling of the nanoparticles. We find that at larger trapping powers (i.e., larger temperatures and stiffer traps) the hybridization rates decrease by more than an order of magnitude. This result is explained by higher temperatures preventing the formation of dimers with lower binding energies. Our results demonstrate that plasmonic heating can be used to fine tune the kinetics of biomolecular binding events.
Assuntos
Materiais Revestidos Biocompatíveis/síntese química , DNA/química , Ouro/química , Calefação/métodos , Nanopartículas Metálicas/química , Nanopartículas Metálicas/ultraestrutura , Ressonância de Plasmônio de Superfície/métodos , Sítios de Ligação , Materiais Revestidos Biocompatíveis/efeitos da radiação , DNA/efeitos da radiação , Transferência de Energia , Ouro/efeitos da radiação , Cinética , Luz , Teste de Materiais , Nanopartículas Metálicas/efeitos da radiaçãoRESUMO
We present results of a comparative study of colloidal anatase titanium oxide nanorods and extremely thin atomic wires of systematically decreasing (2.6 nm down to 0.5 nm) diameter in terms of their optical absorption as well as steady-state and time-resolved photoluminescence. Steady-state photoluminescence spectra of the titania samples show three well-distinguished spectral components, which are ascribed to excitonic emission (4.26 ± 0.2 eV), as well as radiative recombination of trapped holes with electrons from the conduction band (4.04 ± 0.4 eV) and radiative recombination of trapped electrons with holes in the valence band (3.50 ± 0.2 eV) in nanocrystalline anatase TiO(2). Time-resolved photoluminescence measurements point out the existence of different emissive species responsible for the appearance of high-energetic and low-energetic emission peaks of TiO(2) atomic wires and nanorods.
Assuntos
Coloides/química , Medições Luminescentes/métodos , Nanopartículas Metálicas/química , Nanopartículas Metálicas/ultraestrutura , Titânio/química , Luz , Teste de Materiais , Tamanho da Partícula , Espalhamento de RadiaçãoRESUMO
Designing nanoscale objects with the potential to perform externally controlled motion in biological environments is one of the most sought-after objectives in nanotechnology. Different types of chemically and physically powered motors have been prepared at the macro- and microscale. However, the preparation of nanoscale objects with a complex morphology, and the potential for light-driven motion has remained elusive to date. Here, we go a step forward by designing a nanoscale hybrid with a propeller-resembling shape, which can be controlled by focused light under biological conditions. Our hybrid, hereafter "Au@DNA-origami", consists of a spherical gold nanoparticle with self-assembled, biocompatible, two-dimensional (2D) DNA sheets on its surface. As a first step toward the potential utilization of these nanoscale objects as light-driven assemblies in biological environments, we show that they can be optically trapped, and hence translated and deposited on-demand, and that under realistic trapping conditions the thermally induced dehybridization of the DNA sheets can be avoided.
Assuntos
Materiais Biocompatíveis/síntese química , Cristalização/métodos , DNA/química , DNA/ultraestrutura , Nanoestruturas/química , Nanoestruturas/ultraestrutura , Pinças Ópticas , Substâncias Macromoleculares/química , Teste de Materiais , Conformação Molecular , Tamanho da Partícula , Propriedades de SuperfícieRESUMO
Surface-chemistry of individual, optically trapped plasmonic nanoparticles is modified and accelerated by plasmonic overheating. Depending on the optical trapping power, gold nanorods can exhibit red shifts of their plasmon resonance (i.e., increasing aspect ratio) under oxidative conditions. In contrast, in bulk exclusively blue shifts (decreasing aspect ratios) are observed. Supported by calculations, we explain this finding by local temperatures in the trap exceeding the boiling point of the solvent that cannot be achieved in bulk.
Assuntos
Cristalização/métodos , Ouro/química , Calefação/métodos , Nanopartículas Metálicas/química , Nanopartículas Metálicas/ultraestrutura , Pinças Ópticas , Ressonância de Plasmônio de Superfície/métodos , Substâncias Macromoleculares/química , Teste de Materiais , Conformação Molecular , Tamanho da Partícula , Propriedades de SuperfícieRESUMO
PURPOSE: To investigate whether multispectral optoacoustic tomography (MSOT) can reveal the heterogeneous distributions of exogenous agents of interest and vascular characteristics through tumors of several millimeters in diameter in vivo. MATERIALS AND METHODS: Procedures involving animals were approved by the government of Upper Bavaria. Imaging of subcutaneous tumors in mice was performed by using an experimental MSOT setup that produces transverse images at 10 frames per second with an in-plane resolution of approximately 150 µm. To study dynamic contrast enhancement, three mice with 4T1 tumors were imaged before and immediately, 20 minutes, 4 hours, and 24 hours after systemic injection of indocyanine green (ICG). Epifluorescence imaging was used for comparison. MSOT of a targeted fluorescent agent (6 hours after injection) and hemoglobin oxygenation was performed simultaneously (4T1 tumors: n = 3). Epifluorescence of cryosections served as validation. The accumulation owing to enhanced permeability and retention in tumors (4T1 tumors: n = 4, HT29 tumors: n = 3, A2780 tumors: n = 2) was evaluated with use of long-circulating gold nanorods (before and immediately, 1 hour, 5 hours, and 24 hours after injection). Dark-field microscopy was used for validation. RESULTS: Dynamic contrast enhancement with ICG was possible. MSOT, in contrast to epifluorescence imaging, showed a heterogeneous intratumoral agent distribution. Simultaneous imaging of a targeted fluorescent agent and oxy- and deoxyhemoglobin gave functional information about tumor vasculature in addition to the related agent uptake. The accumulation of gold nanorods in tumors seen at MSOT over time also showed heterogeneous uptake. CONCLUSION: MSOT enables live high-spatial-resolution observations through tumors, producing images of distributions of fluorochromes and nanoparticles as well as tumor vasculature.
Assuntos
Adenocarcinoma/diagnóstico , Neoplasias do Colo/diagnóstico , Neoplasias Mamárias Experimentais/diagnóstico , Tomografia Óptica/métodos , Animais , Meios de Contraste/farmacocinética , Modelos Animais de Doenças , Feminino , Corantes Fluorescentes/farmacocinética , Ouro/farmacocinética , Processamento de Imagem Assistida por Computador , Verde de Indocianina/farmacocinética , Camundongos , Nanopartículas , Análise Espectral/métodosRESUMO
We explore a new application of optical tweezers for ultrasensitive detection of sound waves in liquid media. Position tracking of a single gold nanoparticle confined in a three-dimensional optical trap is used to readout acoustic vibrations at a sound power level down to -60 dB, causing a â¼90 µeV increase in kinetic energy of the nanoparticle. The unprecedented sensitivity of such a nanoear is achieved by processing the nanoparticle's motion in the frequency domain. The concept developed here will enable us to access the interior of biological microorganisms and micromechanical machines not accessible by other microscopy types.
RESUMO
Microfluidic jetting is a promising method to produce giant unilamellar phospholipid vesicles for mimicking living cells in biomedical studies. We have investigated the chemical composition of membranes of vesicles prepared using this approach by means of Raman scattering spectroscopy. The membranes of all jetted vesicles are found to contain residuals of the organic solvent decane used in the preparation of the initial planar membrane. The decane inclusions are randomly distributed over the vesicle surface area and vary in thickness from a few to several tens of nanometers. Our findings point out that the membrane properties of jetted vesicles may differ considerably from those of vesicles prepared by other methods and from those of living cells.
Assuntos
Bicamadas Lipídicas/metabolismo , Microfluídica/métodos , Fosfatidilcolinas/análise , Análise Espectral Raman/métodos , Lipossomas Unilamelares/metabolismo , Alcanos/química , Solventes/químicaRESUMO
Here we introduce a new paradigm of far-field optical lithography, optical force stamping lithography. The approach employs optical forces exerted by a spatially modulated light field on colloidal nanoparticles to rapidly stamp large arbitrary patterns comprised of single nanoparticles onto a substrate with a single-nanoparticle positioning accuracy well beyond the diffraction limit. Because the process is all-optical, the stamping pattern can be changed almost instantly and there is no constraint on the type of nanoparticle or substrates used.
Assuntos
Coloides/química , Nanoestruturas/química , Nanoestruturas/ultraestrutura , Pinças Ópticas , Fotografação/métodos , Teste de Materiais , Tamanho da Partícula , Propriedades de SuperfícieRESUMO
We propose and demonstrate a hybrid lithographic technique capable of nanopatterning surfaces by optothermal decomposition of a polymeric film induced by a single metal nanoparticle. A tightly focused laser beam exerting a strong optical force onto the nanoparticle is used to move it inside the polymer film. Due to efficient plasmonic absorption of the laser light, the nanoparticle is heated up to temperatures of several hundred degrees, causing melting or even thermal decomposition of the polymer film. By this method, grooves less than 100 nm wide and tens of micrometers long can be directly milled in a polymer layer.
RESUMO
We have coated gold nanorods (NRs) with thermoresponsive microgel shells based on poly(N-isopropylacrylamide) (pNIPAM). We demonstrate by simultaneous laser-heating and optical extinction measurements that the Au NR cores can be simultaneously used as fast optothermal manipulators (switchers) and sensitive optical reporters of the microgel state in a fully externally controlled and reversible manner. We support our results with optical modeling based on the boundary element method and 3D numerical analysis on the temperature distribution. Briefly, we show that due to the sharp increase in refractive index resulting from the optothermally triggered microgel collapse, the longitudinal plasmon band of the coated Au NRs is significantly red-shifted. The optothermal control over the pNIPAM shell, and thereby over the optical response of the nanocomposite, is fully reversible and can be simply controlled by switching on and off a NIR heating laser. In contrast to bulk solution heating, we demonstrate that light-triggering does not compromise colloidal stability, which is of primary importance for the ultimate utilization of these types of nanocomposites as remotely controlled optomechanical actuators, for applications spanning from drug delivery to photonic crystals and nanoscale motion.
RESUMO
We propose and demonstrate a new method of an all-optical, contactless, one-step injection of single gold nanoparticles through phospholipid membranes. The method is based on the combination of strong optical forces acting on and simultaneous optical heating of a gold nanoparticle exposed to laser light tuned to the plasmon resonance of the nanoparticle. A focused laser beam captures single nanoparticles from the colloidal suspension, guides them toward a phospholipid vesicle and propels them through the gel-phase membrane, resulting in the nanoparticle internalization into the vesicle. Efficient resonant optical heating of the gold nanoparticle causes a pore to form in the gel-phase membrane, a few-hundred nanometers in size, which remains open for several minutes.
Assuntos
Ouro/química , Bicamadas Lipídicas/química , Microfluídica/métodos , Nanoestruturas/química , Nanoestruturas/ultraestrutura , Pinças Ópticas , Fosfolipídeos/química , Tamanho da PartículaRESUMO
We demonstrate that optical trapping of multiple silver nanoparticles is strongly influenced by plasmonic coupling of the nanoparticles. Employing dark-field Rayleigh scattering imaging and spectroscopy on multiple silver nanoparticles optically trapped in three dimensions, we experimentally investigate the time-evolution of the coupled plasmon resonance and its influence on the trapping stability. With time the coupling strengthens, which is observed as a gradual red shift of the coupled plasmon scattering. When the coupled plasmon becomes resonant with the trapping laser wavelength, the trap is destabilized and nanoparticles are released from the trap. Modeling of the trapping potential and its comparison to the plasmonic heating efficiency at various nanoparticle separation distances suggests a thermal mechanism of the trap destabilization. Our findings provide insight into the specificity of three-dimensional optical manipulation of plasmonic nanostructures suitable for field enhancement, for example for surface-enhanced Raman scattering.
Assuntos
Nanoestruturas/química , Nanoestruturas/efeitos da radiação , Pinças Ópticas , Prata/química , Ressonância de Plasmônio de Superfície/instrumentação , Desenho de Equipamento , Análise de Falha de Equipamento , Temperatura Alta , Luz , Prata/efeitos da radiaçãoRESUMO
Current colloidal synthesis is able to produce an extensive spectrum of nanoparticles with unique optoelectronic, magnetic, and catalytic properties. In order to exploit them in nanoscale devices, flexible methods are needed for the controlled integration of nanoparticles on surfaces with few-nanometer precision. Current technologies usually involve a combination of molecular self-assembly with surface patterning by diverse lithographic methods like UV, dip-pen, or microcontact printing.(1,2) Here we demonstrate the direct laser printing of individual colloidal nanoparticles by using optical forces for positioning and the van der Waals attraction for binding them to the substrate. As a proof-of-concept, we print single spherical gold nanoparticles with a positioning precision of 50 nm. By analyzing the printing mechanism, we identify the key physical parameters controlling the method, which has the potential for the production of nanoscale devices and circuits with distinct nanoparticles.
RESUMO
CdSe/CdS semiconductor nanocrystal heterostructures are currently of high interest for the peculiar electronic structure offering unique optical properties. Here, we show that nanorods and tetrapods made of such material combination enable efficient multiexcitonic emission, when the volume of the nanoparticle is maximized. This condition is fulfilled by tetrapods with an arm length of 55 nm and results in a dual emission with comparable intensities from the CdS arms and CdSe core. The relative intensities of the dual emission, originating from exciton phase-space filling and reduced Auger recombination, can be effectively modulated by the photon fluence of the pump laser. The results, obtained under steady-state detection conditions, highlight the properties of tetrapods as multiexciton dual-color emitters.
Assuntos
Compostos de Cádmio/química , Iluminação/métodos , Nanoestruturas/química , Nanoestruturas/ultraestrutura , Pontos Quânticos , Compostos de Selênio/química , Sulfetos/química , Teste de Materiais , Tamanho da PartículaRESUMO
Electrostatic complexes of a water-soluble fluorescent conjugated polymer, poly[9,9-bis(3'-((N,N-dimethyl)-N-ethylammonium)propyl)-2,7-fluorene-alt-1,4-phenylene]dibromide (PDFD), and water-soluble CdTe quantum dots (QDs) are designed to provide a cascaded FRET for DNA hybridization detection. PDFD has two functions in the detection scheme: as a light-harvesting antenna, it enhances the emission of QDs by the first level FRET and inverts the sign of the surface charge of QDs, thus providing a positively charged surface to allow negatively charged dye-labeled DNA to interact with the resulting complex. This interaction causes the second level FRET to infrared-emitting dye labeled on the probe DNA, providing a reliable signal-on sensing platform discriminating between complementary and non-complementary DNA. A detailed spectroscopic study offers a clear description of photophysical processes in the designed polymer/QD/DNA complex, providing ample potential for further sensitivity and selectivity improvements.
Assuntos
DNA/genética , Transferência Ressonante de Energia de Fluorescência/instrumentação , Hibridização in Situ Fluorescente/instrumentação , Nanotecnologia/instrumentação , Análise de Sequência com Séries de Oligonucleotídeos/instrumentação , Pontos Quânticos , Desenho de Equipamento , Análise de Falha de Equipamento , Transferência Ressonante de Energia de Fluorescência/métodos , Hibridização in Situ Fluorescente/métodos , Coloração e RotulagemRESUMO
Hybrid organic-inorganic nanomaterials have the potential of providing synergetic properties. Blends of semiconductor nanocrystals and conjugated polymers in particular promise novel optoelectronic properties. Effective design of tailored optoelectronic properties requires a deep understanding of the photophysics of these composite materials, which includes charge separation and Dexter and Förster energy transfer. We performed a detailed and quantitative spectroscopic investigation of a type II aligned hybrid system consisting of a blue emitting conducting polymer and CdTe nanocrystals. Although charge separation is expected from the type II alignment, we find a dominant (70% efficiency) energy transfer process. We discuss all possible de-excitation pathways for the excitons in terms of the alignment of energy levels, time scales, and physical geometry of the system. This allows us to conclude that energy transfer occurs via the Förster mechanism and provides a clear guideline for the design of novel hybrid materials.