The Overlap Subgroup of Functional Dyspepsia Exhibits More Severely Impaired Gastric and Autonomic Functions.

GOALS: A combination of multiple tests was introduced to noninvasively investigate the differences in pathophysiologies among functional dyspepsia (FD) subgroups, including postprandial distress syndrome (PDS), epigastric pain syndrome (EPS), and overlap. BACKGROUND: It has not been extensively evaluated whether different pathophysiologies are involved in FD subgroups. STUDY: This multicenter study included 364 FD patients fulfilling Rome IV criteria and 47 healthy controls. A combined noninvasive gastric and autonomic function test was performed: The electrogastrogram and electrocardiogram were recorded simultaneously in the fasting state and after a drink test. Symptoms after drinking were recorded using visual analog scale. RESULTS: (1) Compared with HC, FD patients showed a decreased maximum tolerable volume (MTV) ( P <0.01) and percentage of normal gastric slow waves [normal gastric slow waves (%NSW)] ( P <0.01), and increased postdrinking symptoms, anxiety ( P <0.01), and depression ( P <0.01). The drink reduced %NSW in both FD patients and HC; however, the effect was more potent in patients. (2) The PDS and overlap groups displayed a reduced MTV ( P <0.05). The overlap group exhibited a higher symptom score at 30 minutes after drinking, and higher anxiety and depression scores, and a higher sympathovagal ratio than the EPS ( P <0.05 for all) and PDS ( P <0.01 for all). (3) In the PDS subgroup, the MTV, postprandial sympathovagal ratio, and depression were associated with the overall dyspepsia symptom scale (DSS, P =0.034, 0.021, 0.043, respectively). No significant associations were found in the other 2 subgroups. CONCLUSIONS: The combination of multiple tests can detect pathophysiological abnormities in FD patients. Overall, patients with overlap symptoms display more severe pathophysiologies.

Effect of central screw taper angles on the loosening performance and fatigue characteristics of dental implants.

Biomechanical performance plays an important role in the long-term service of dental implants. Loosening and fatigue damage of the central screw are the most common problems. This research investigated the effect of the central screw taper angle on the loosening performance and fatigue characteristics of dental implants. Central screws with four taper angles, 30°, 60°, 90° and 180°, were processed and tested. The loosening performance of the screws under initial and postload conditions was compared. Then, the fatigue characteristics of dental implants was measured. Finally, the wear and fracture modes of the screws were observed. The damage locations were verified by finite element analysis (FEA). The results showed that the central screws with 30° taper had substantially better anti-loosening performance and less fretting wear. The central screws with 180° taper had a higher preload, resulting in a longer fatigue life. Furthermore, the fatigue fracture of the central screw occurred at the level of the first thread position, consistent with the FEA results. In the future clinical applications, central screws with a 30° taper angle may improve anti-loosening performance and prolong fatigue life by increasing the tightening torque.

The complete mitochondrial genome of the edible mushroom Grifola frondosa.

The culinary-medicinal mushroom Grifola frondosa is widely cultivated in East Asia. In this study, the complete mitochondrial genome of G. frondosa was determined using Illumina sequencing. The circular molecule was 197,486 bp in length with a content of 25.01% GC, which was one of the largest mitochondrial genomes in the order Polyporales. A total of 39 known genes encoding 13 common mitochondrial genes, 24 tRNA genes, 1 ribosomal protein s3 gene (rps3), and 1 DNA polymerase gene (dpo) were predicted in this genome. The phylogenetic analysis showed that G. frondosa clustered together with Sparassis crispa, Laetiporus sulphureus, Wolfiporia cocos, and Taiwanofungus camphoratus. The complete mitochondrial genome reported here may provide new insight into genetic information and evolution for further studies.

Effect of Loading Angles and Implant Lengths on the Static and Fatigue Fractures of Dental Implants.

Mechanical properties play a key role in the failure of dental implants. Dental implants require fatigue life testing before clinical application, but this process takes a lot of time. This study investigated the effect of various loading angles and implant lengths on the static fracture and fatigue life of dental implants. Implants with lengths of 9 mm and 11 mm were prepared. Static fracture tests and dynamic fatigue life tests were performed under three loading angles (30°, 40°, and 50°), and the level arm and bending moment were measured. After that, the fracture morphology and fracture mode of the implant were observed. The results showed that 9 mm length implants have a higher static failure load and can withstand greater bending moments, while 11 mm length implants have a longer fatigue life. In addition, as the loading angle increases, the static strength and bending moment decrease linearly, and the fatigue life shows an exponential decrease at a rate of three times. Increasing the loading angle reduces the time of the implant fatigue test, which may be an effective method to improve the efficiency of the experiment.