RESUMO
The feasibility of bioprocess development relies heavily on the successful application of primary recovery and purification techniques. Aqueous two-phase extraction (ATPE) disrupts the definition of "unit operation" by serving as an integrative and intensive technique that combines different objectives such as the removal of biomass and integrated recovery and purification of the product of interest. The relative simplicity of processing large samples renders this technique an attractive alternative for industrial bioprocessing applications. However, process development is hindered by the lack of easily predictable partition behaviours, the elucidation of which necessitates a large number of experiments to be conducted. Liquid handling devices can assist to address this problem; however, they are configured to operate using low viscosity fluids such as water and water-based solutions as opposed to highly viscous polymeric solutions, which are typically required in ATPE. In this work, an automated high throughput ATPE process development framework is presented by constructing phase diagrams and identifying the binodal curves for PEG6000, PEG3000, and PEG2000. Models were built to determine viscosity- and volume-independent transfer parameters. The framework provided an appropriate strategy to develop a very precise and accurate operation by exploiting the relationship between different liquid transfer parameters and process error. Process accuracy, measured by mean absolute error, and device precision, evaluated by the coefficient of variation, were both shown to be affected by the mechanical properties, particularly viscosity, of the fluids employed. For PEG6000, the mean absolute error improved by six-fold (from 4.82% to 0.75%) and the coefficient of variation improved by three-fold (from 0.027 to 0.008) upon optimisation of the liquid transfer parameters accounting for the viscosity effect on the PEG-salt buffer utilising ATPE operations. As demonstrated here, automated liquid handling devices can serve to streamline process development for APTE enabling wide adoption of this technique in large scale bioprocess applications.
Assuntos
Polietilenoglicóis , Viscosidade , Polietilenoglicóis/química , Água/química , Automação , Extração Líquido-Líquido/métodosRESUMO
BACKGROUND: The production of chemicals via bio-based routes is held back by limited easy-to-use stabilisation systems. A wide range of plasmid stabilisation mechanisms can be found in the literature, however, how these mechanisms effect genetic stability and how host strains still revert to non-productive variants is poorly understood at the single-cell level. This phenomenon can generate difficulties in production-scale bioreactors as different populations of productive and non-productive cells can arise. To understand how to prevent non-productive strains from arising, it is vital to understand strain behaviour at a single-cell level. The persistence of genes located on plasmid vectors is dependent on numerous factors but can be broadly separated into structural stability and segregational stability. While structural stability refers to the capability of a cell to resist genetic mutations that bring about a loss of gene function in a production pathway, segregational stability refers to the capability of a cell to correctly distribute plasmids into daughter cells to maintain copy number. A lack of segregational stability can rapidly generate plasmid-free variants during replication, which compromises productivity. RESULTS: Citramalate synthase expression was linked in an operon to the expression of a fluorescent reporter to enable rapid screening of the retention of a model chemical synthesis pathway in a continuous fermentation of E. coli. Cells without additional plasmid stabilisation started to lose productivity immediately after entering the continuous phase. Inclusion of a multimer resolution site, cer, enabled a steady-state production period of 58 h before a drop in productivity was detected. Single-cell fluorescence measurements showed that plasmid-free variants arose rapidly without cer stabilisation and that this was likely due to unequal distribution of plasmid into daughter cells during cell division. The addition of cer increased total chemical yield by more than 50%. CONCLUSIONS: This study shows the potential remains high for plasmids to be used as pathway vectors in industrial bio-based chemicals production, providing they are correctly stabilised. We demonstrate the need for accessible bacterial 'toolkits' to enable rapid production of known, stabilised bacterial production strains to enable continuous fermentation at scale for the chemicals industry.
Assuntos
Escherichia coli , Glucose , Fermentação , Escherichia coli/genética , Escherichia coli/metabolismo , Glucose/metabolismo , Plasmídeos/genética , Vetores GenéticosRESUMO
Large amounts of pectin-rich biomass are generated worldwide yearly, which can be hydrolysed by pectinases to obtain bio-based chemical building blocks such as D-galacturonic acid (GalA). The aim of this work was to investigate thermophilic pectinases and explore their synergistic application in the bioconversion of pectic substrates into GalA. Two exo-polygalacturonases (exo-PGs) from Thermotoga maritima (TMA01) and Bacillus licheniformis (BLI04) and two pectin methylesterases (PMEs) from Bacillus licheniformis (BLI09) and Streptomyces ambofaciens (SAM10) were cloned and expressed in Escherichia coli BL21 (DE3), purified and fully characterised. These pectinases exhibited optimum activity at temperatures above 50 °C and good stability at high temperature (40-90 °C) for up to 24 h. Exo-PGs preferred non-methylated substrates, suggesting that previous pectin demethylation by PMEs was necessary to achieve an efficient pectin monomerisation into GalA. Synergistic activity between PMEs and exo-PGs was tested using pectin from apple, citrus and sugar beet. GalA was obtained from apple and citrus pectin in a concentration of up to 2.5 mM after 4 h reaction at 50 °C, through the combined action of BLI09 PME with either TMA01 or BLI04 exo-PGs. Overall, this work contributes to expand the knowledge of pectinases from thermophiles and provides further insights into their application in the initial valorisation of sustainable pectin-rich biomass feedstocks.
Assuntos
Bacillus licheniformis , Poligalacturonase , Bacillus licheniformis/genética , Ácidos Hexurônicos , Pectinas/química , Poligalacturonase/genéticaRESUMO
The current production of a number of commodity chemicals relies on the exploitation of fossil fuels and hence has an irreversible impact on the environment. Biotechnological processes offer an attractive alternative by enabling the manufacturing of chemicals by genetically modified microorganisms. However, this alternative approach poses some important technical challenges that must be tackled to make it competitive. On the one hand, the design of biotechnological processes is based on trial-and-error approaches, which are not only costly in terms of time and money, but also result in suboptimal designs. On the other hand, the manufacturing of chemicals by biological processes is almost exclusively carried out by batch or fed-batch cultures. Given that batch cultures are expensive and not easy to scale, technical means must be developed to make continuous cultures feasible and efficient. In order to address these challenges, we have developed a mathematical model able to integrate in a single model both the genome-scale metabolic model for the organism synthesizing the chemical of interest and the dynamics of the bioreactor in which the organism is cultured. Such a model is based on the use of Flexible Nets, a modeling formalism for dynamical systems. The integration of a microscopic (organism) and a macroscopic (bioreactor) model in a single net provides an overall view of the whole system and opens the door to global optimizations. As a case study, the production of citramalate with respect to the substrate consumed by E. coli is modeled, simulated and optimized in order to find the maximum productivity in a steady-state continuous culture. The predicted computational results were consistent with the wet lab experiments.
RESUMO
BACKGROUND: Klebsiella pneumoniae contains an endogenous isobutanol synthesis pathway. The ipdC gene annotated as an indole-3-pyruvate decarboxylase (Kp-IpdC), was identified to catalyze the formation of isobutyraldehyde from 2-ketoisovalerate. RESULTS: Compared with 2-ketoisovalerate decarboxylase from Lactococcus lactis (KivD), a decarboxylase commonly used in artificial isobutanol synthesis pathways, Kp-IpdC has an 2.8-fold lower Km for 2-ketoisovalerate, leading to higher isobutanol production without induction. However, expression of ipdC by IPTG induction resulted in a low isobutanol titer. In vitro enzymatic reactions showed that Kp-IpdC exhibits promiscuous pyruvate decarboxylase activity, which adversely consume the available pyruvate precursor for isobutanol synthesis. To address this, we have engineered Kp-IpdC to reduce pyruvate decarboxylase activity. From computational modeling, we identified 10 amino acid residues surrounding the active site for mutagenesis. Ten designs consisting of eight single-point mutants and two double-point mutants were selected for exploration. Mutants L546W and T290L that showed only 5.1% and 22.1% of catalytic efficiency on pyruvate compared to Kp-IpdC, were then expressed in K. pneumoniae for in vivo testing. Isobutanol production by K. pneumoniae T290L was 25% higher than that of the control strain, and a final titer of 5.5 g/L isobutanol was obtained with a substrate conversion ratio of 0.16 mol/mol glucose. CONCLUSIONS: This research provides a new way to improve the efficiency of the biological route of isobutanol production.
RESUMO
Understanding the impact of spatial heterogeneities that are known to occur in large-scale cell culture bioreactors remains a significant challenge. This work presents a novel methodology for mimicking the effects of pH and dissolved oxygen heterogeneities on Chinese hamster ovary (CHO) cell culture performance and antibody quality characteristics, using an automated miniature bioreactor system. Cultures of 4 different cell lines, expressing 3 IgG molecules and one fusion protein, were exposed to repeated pH and dissolved oxygen tension (DOT) fluctuations between pH 7.0-7.5 and DOT 10%-30%, respectively, for durations of 15, 30, and 60 min. Fluctuations in pH had a minimal impact on growth, productivity, and product quality although some changes in lactate metabolism were observed. DOT fluctuations were found to have a more significant impact; a 35% decrease in cell growth and product titre was observed in the fastest growing cell line tested, while all cell lines exhibited a significant increase in lactate accumulation. Product quality analysis yielded varied results; two cell lines showed an increase in the G0F glycan and decrease in G1F, G2F, and Man5; however, another line showed the opposite trend. The study suggests that the response of CHO cells to the effects of fluctuating culture conditions is cell line specific and that higher growing cell lines are most impacted. The miniature bioreactor system described in this work therefore provides a platform for use during early stage cell culture process development to identify cell lines that may be adversely impacted by the pH and DOT heterogeneities encountered on scale-up. This experimental data can be combined with computational modeling approaches to predict overall cell culture performance in large-scale bioreactors.
Assuntos
Reatores Biológicos , Técnicas de Cultura de Células , Animais , Células CHO , Técnicas de Cultura de Células/métodos , Cricetinae , Cricetulus , Concentração de Íons de Hidrogênio , Lactatos , Oxigênio/metabolismoRESUMO
Klebsiella pneumoniae is a 2,3-butanediol producing bacterium. Nevertheless, a design and construction of L-valine production strain was studied in this paper. The first step of 2,3-butanediol synthesis and branched-chain amino acid synthesis pathways share the same step of α-acetolactate synthesis from pyruvate. However, the two pathways are existing in parallel and do not interfere with each other in the wild-type strain. A knockout of budA blocked the 2,3-butanediol synthesis pathway and resulted in the L-valine production. The budA coded an α-acetolactate decarboxylase and catalyzed the acetoin formation from α-acetolactate. Furthermore, blocking the lactic acid synthesis by knocking out of ldhA, which is encoding a lactate dehydrogenase, improved the L-valine synthesis. 2-Ketoisovalerate is the precursor of L-valine, it is also an intermediate of the isobutanol synthesis pathway, while indole-3-pyruvate decarboxylase (ipdC) is responsible for isobutyraldehyde formation from 2-ketoisovalerate. Production of L-valine has been improved by knocking out of ipdC. On the other side, the ilvE, encoding a transaminase B, reversibly transfers one amino group from glutamate to α-ketoisovalerate. Overexpression of ilvE exhibited a distinct improvement of L-valine production. The brnQ encodes a branched-chain amino acid transporter, and L-valine production was further improved by disrupting brnQ. It is also revealed that weak acidic and aerobic conditions favor L-valine production. Based on these findings, L-valine production by metabolically engineered K. pneumonia was examined. In fed-batch fermentation, 22.4 g/L of L-valine was produced by the engineered K. pneumoniae ΔbudA-ΔldhA-ΔipdC-ΔbrnQ-ilvE after 55 h of cultivation, with a substrate conversion ratio of 0.27 mol/mol glucose.
Assuntos
Klebsiella pneumoniae , Valina , Vias Biossintéticas/genética , Butileno Glicóis/metabolismo , Klebsiella pneumoniae/genéticaRESUMO
The dha operon of Klebsiella pneumoniae is responsible for glycerol catabolism and 1,3-propanediol formation. Subunits of glycerol dehydratase and the large subunit of glycerol dehydratase reactivating factor are encoded by dhaBCE and dhaF, respectively. Proteins of pdu operon form a microcompartment (bacteria organelle) and responsible for 1,2-propanediol catabolism. In this operon, pduCDE and pduG encode subunits of diol dehydratase and its reactivating factor. Diol dehydratase is an isofunctional enzyme of glycerol dehydratase, but its role in glycerol catabolism was not entirely clear. In this study, dhaBCE, pduCDE, dhaF, and pduG in K. pneumoniae were knocked out individually or combinedly. These strains were cultured with glycerol as a substrate, and dehydratase activities in the cytoplasm and microcompartment were detected. Results showed that glycerol dehydratase and diol dehydratase were simultaneously responsible for glycerol catabolism in K. pneumoniae. Besides being packaged in microcompartment, large amounts of diol dehydratase was also presented in the cytoplasm. However, the Pdu microcompartment reduced the accumulation of 3-hydroxypropionaldehyde in the fermentation broth. PduG can cross reactivate glycerol dehydratase instead of DhaF. However, DhaF is not involved in reactivation of diol dehydratase. In conclusion, diol dehydratase and Pdu microcompartment play important roles in glycerol catabolism in K. pneumoniae.
Assuntos
Propanodiol Desidratase , Cobamidas/metabolismo , Glicerol/metabolismo , Hidroliases/genética , Hidroliases/metabolismo , Klebsiella pneumoniae/genética , Óperon , Propanodiol Desidratase/genética , Propanodiol Desidratase/metabolismoRESUMO
Klebsiella pneumoniae is an important microorganism and is used as a cell factory for many chemicals production. When glycerol was used as the carbon source, 1,3-propanediol was the main catabolite of this bacterium. K. pneumoniae ΔtpiA lost the activity of triosephosphate isomerase and prevented glycerol catabolism through the glycolysis pathway. But this strain still utilized glycerol, and 1,2-propanediol became the main catabolite. Key enzymes of 1,2-propanediol synthesis from glycerol were investigated in detail. dhaD and gldA encoded glycerol dehydrogenases were both responsible for the conversion of glycerol to dihydroxyacetone, but overexpression of the two enzymes resulted in a decrease of 1,2-propanediol production. There are two dihydroxyacetone kinases (I and II), but the dihydroxyacetone kinase I had no contribution to dihydroxyacetone phosphate formation. Dihydroxyacetone phosphate was converted to methylglyoxal, and methylglyoxal was then reduced to lactaldehyde or hydroxyacetone and further reduced to form 1,2-propanediol. Individual overexpression of mgsA, yqhD, and fucO resulted in increased production of 1,2-propanediol, but only the combined expression of mgsA and yqhD showed a positive effect on 1,2-propanediol production. The process parameters for 1,2-propanediol production by Kp ΔtpiA-mgsA-yqhD were optimized, with pH 7.0 and agitation rate of 350 rpm found to be optimal. In the fed-batch fermentation, 9.3 g/L of 1,2-propanediol was produced after 144 h of cultivation, and the substrate conversion ratio was 0.2 g/g. This study provides an efficient way of 1,2-propanediol production from glycerol via an endogenous pathway of K. pneumoniae.Key points⢠1,2-Propanediol was synthesis from glycerol by a tpiA knocked out K. pneumoniae⢠Overexpression of mgsA, yqhD, or fucO promote 1,2-propanediol production⢠9.3 g/L of 1,2-propanediol was produced in fed-batch fermentation.
Assuntos
Glicerol , Klebsiella pneumoniae , Fermentação , Klebsiella pneumoniae/genética , Propilenoglicol , PropilenoglicóisRESUMO
BACKGROUND: Klebsiella pneumoniae is a bacterium that can be used as producer for numerous chemicals. Glycerol can be catabolised by K. pneumoniae and dihydroxyacetone is an intermediate of this catabolism pathway. Here dihydroxyacetone and glycerol were produced from glucose by this bacterium based a redirected glycerol catabolism pathway. RESULTS: tpiA, encoding triosephosphate isomerase, was knocked out to block the further catabolism of dihydroxyacetone phosphate in the glycolysis. After overexpression of a Corynebacterium glutamicum dihydroxyacetone phosphate dephosphorylase (hdpA), the engineered strain produced remarkable levels of dihydroxyacetone (7.0 g/L) and glycerol (2.5 g/L) from glucose. Further increase in product formation were obtained by knocking out gapA encoding an iosenzyme of glyceraldehyde 3-phosphate dehydrogenase. There are two dihydroxyacetone kinases in K. pneumoniae. They were both disrupted to prevent an inefficient reaction cycle between dihydroxyacetone phosphate and dihydroxyacetone, and the resulting strains had a distinct improvement in dihydroxyacetone and glycerol production. pH 6.0 and low air supplement were identified as the optimal conditions for dihydroxyacetone and glycerol production by K, pneumoniae ΔtpiA-ΔDHAK-hdpA. In fed batch fermentation 23.9 g/L of dihydroxyacetone and 10.8 g/L of glycerol were produced after 91 h of cultivation, with the total conversion ratio of 0.97 mol/mol glucose. CONCLUSIONS: This study provides a novel and highly efficient way of dihydroxyacetone and glycerol production from glucose.
Assuntos
Di-Hidroxiacetona/metabolismo , Klebsiella pneumoniae/metabolismo , Fosfato de Di-Hidroxiacetona/metabolismo , Ácidos Difosfoglicéricos/metabolismo , Fermentação , Genes Bacterianos , Glucose/metabolismo , Gliceraldeído 3-Fosfato/metabolismo , Gliceraldeído-3-Fosfato Desidrogenases/genética , Gliceraldeído-3-Fosfato Desidrogenases/metabolismo , Glicerol/metabolismo , Concentração de Íons de Hidrogênio , Klebsiella pneumoniae/genética , Klebsiella pneumoniae/crescimento & desenvolvimento , Engenharia Metabólica , Redes e Vias Metabólicas , Fosfotransferases (Aceptor do Grupo Álcool)/genética , Fosfotransferases (Aceptor do Grupo Álcool)/metabolismo , TermodinâmicaRESUMO
Ethylene glycol and glycolic acid are bulk chemicals with a broad range of applications. The ethylene glycol and glycolic acid biosynthesis pathways have been produced by microorganisms and used as a biological route for their production. Unlike the methods that use xylose or glucose as carbon sources, xylonic acid was used as a carbon source to produce ethylene glycol and glycolic acid in this study. Amounts of 4.2 g/L of ethylene glycol and 0.7 g/L of glycolic acid were produced by a wild-type Escherichia coli W3110 within 10 H of cultivation with a substrate conversion ratio of 0.5 mol/mol. Furthermore, E. coli strains that produce solely ethylene glycol or glycolic acid were constructed. 10.3 g/L of glycolic acid was produced by E. coli ΔyqhD+aldA, and the achieved conversion ratio was 0.56 mol/mol. Similarly, the E. coli ΔaldA+yqhD produced 8.0 g/L of ethylene glycol with a conversion ratio of 0.71 mol/mol. Ethylene glycol and glycolic acid production by E. coli on xylonic acid as a carbon source provides new information on the biosynthesis pathway of these products and opens a novel way of biomass utilization.
Assuntos
Escherichia coli/metabolismo , Etilenoglicol/metabolismo , Glicolatos/metabolismo , Aldeído Oxirredutases/deficiência , Aldeído Oxirredutases/metabolismo , Aldeído Redutase/genética , Aldeído Redutase/metabolismo , Escherichia coli/genética , Proteínas de Escherichia coli/genética , Proteínas de Escherichia coli/metabolismo , Deleção de GenesRESUMO
2,3-Dihydroxyisovalerate is an intermediate of the valine synthesis pathway. However, neither natural microorganisms nor valine producing engineered strains have been reported yet to produce this chemical. Based on the 2,3-butanediol synthesis pathway, a biological route of 2,3-dihydroxyisovalerate production was developed using a budA and ilvD disrupted Klebsiella pneumoniae strain in our previous research. We hypothesised, that other 2,3-butanediol producing bacteria could be used for 2,3-dihydroxyisovalerate production. Here a budA disrupted Enterobacter cloacae was constructed, and this strain exhibited a high 2,3-dihydroxyisovalerate producing ability. Disruption of ilvD in E. cloacae ΔbudA further increased 2,3-dihydroxyisovalerate level. The disruption of budA, encoding an acetolactate decarboxylase, resulted in the acetolactate synthesized in the 2,3-butanediol synthesis pathway to flow into the valine synthesis pathway. The additional disruption of ilvD, encoding a dihydroxy acid dehydratase, prevented the 2,3-dihydroxyisovalerate to be further metabolized in the valine synthesis pathway. Thus, the disruption of both budA and ilvD in 2,3-butanediol producing strains might be an universal strategy for 2,3-dihydroxyisovalerate accumulation. After optimization of the medium components and culture parameters 31.2â¯g/L of 2,3-dihydroxyisovalerate was obtained with a productivity of 0.41â¯g/L h and a substrate conversion ratio of 0.56â¯mol/mol glucose in a fed-batch fermentation. This approach provides an economic way for 2,3-dihydroxyisovalerate production.
Assuntos
Enterobacter cloacae/metabolismo , Valeratos/metabolismo , Reatores Biológicos , Vias Biossintéticas , Butileno Glicóis/metabolismo , Carboxiliases/genética , Carboxiliases/metabolismo , Meios de Cultura/química , Enterobacter cloacae/genética , Fermentação , Glicerol/metabolismo , Hidroliases/genética , Hidroliases/metabolismo , Mutação , Xilose/metabolismoRESUMO
2,3-Dihydroxyisovalerate is an intermediate of valine and leucine biosynthesis pathway; however, no natural microorganism has been found yet that can accumulate this compound. Klebsiella pneumoniae is a useful bacterium that can be used as a workhorse for the production of a range of industrially desirable chemicals. Dihydroxy acid dehydratase, encoded by the ilvD gene, catalyzes the reaction of 2-ketoisovalerate formation from 2,3-dihydroxyisovalerate. In this study, an ilvD disrupted strain was constructed which resulted in the inability to synthesize 2-ketoisovalerate, yet accumulate 2,3-dihydroxyisovalerate in its culture broth. 2,3-Butanediol is the main metabolite of K. pneumoniae and its synthesis pathway and the branched-chain amino acid synthesis pathway share the same step of the α-acetolactate synthesis. By knocking out the budA gene, carbon flow into the branched-chain amino acid synthesis pathway was upregulated, which resulted in a distinct increase in 2,3-dihydroxyisovalerate levels. Lactic acid was identified as a by-product of the process and by blocking the lactic acid synthesis pathway, a further increase in 2,3-dihydroxyisovalerate levels was obtained. The culture parameters of 2,3-dihydroxyisovalerate fermentation were optimized, which include acidic pH and medium level oxygen supplementation to favor 2,3-dihydroxyisovalerate synthesis. At optimal conditions (pH 6.5, 400 rpm), 36.5 g/L of 2,3-dihydroxyisovalerate was produced in fed-batch fermentation over 45 h, with a conversion ratio of 0.49 mol/mol glucose. Thus, a biological route of 2,3-dihydroxyisovalerate production with high conversion ratio and final titer was developed, providing a basis for an industrial process. Key Points ⢠A biological route of 2,3-dihydroxyisovalerate production was setup. ⢠Disruption of budA causes 2,3-dihydroxuisovalerate accumulation in K. pneumoniae. ⢠Disruption of ilvD prevents 2,3-dihydroxyisovalerate reuse by the cell. ⢠36.5 g/L of 2,3-dihydroxyisovalerate was obtained in fed-batch fermentation.
Assuntos
Vias Biossintéticas , Fermentação , Klebsiella pneumoniae/metabolismo , Valeratos/metabolismo , Butileno Glicóis/metabolismo , Meios de Cultura/química , Concentração de Íons de Hidrogênio , Microbiologia Industrial , Klebsiella pneumoniae/genética , Ácido Láctico/metabolismo , Leucina/biossíntese , Oxigênio/metabolismo , Valina/biossínteseRESUMO
BACKGROUND: Biological routes for ethylene glycol production have been developed in recent years by constructing the synthesis pathways in different microorganisms. However, no microorganisms have been reported yet to produce ethylene glycol naturally. RESULTS: Xylonic acid utilizing microorganisms were screened from natural environments, and an Enterobacter cloacae strain was isolated. The major metabolites of this strain were ethylene glycol and glycolic acid. However, the metabolites were switched to 2,3-butanediol, acetoin or acetic acid when this strain was cultured with other carbon sources. The metabolic pathway of ethylene glycol synthesis from xylonic acid in this bacterium was identified. Xylonic acid was converted to 2-dehydro-3-deoxy-D-pentonate catalyzed by D-xylonic acid dehydratase. 2-Dehydro-3-deoxy-D-pentonate was converted to form pyruvate and glycolaldehyde, and this reaction was catalyzed by an aldolase. D-Xylonic acid dehydratase and 2-dehydro-3-deoxy-D-pentonate aldolase were encoded by yjhG and yjhH, respectively. The two genes are part of the same operon and are located adjacent on the chromosome. Besides yjhG and yjhH, this operon contains four other genes. However, individually inactivation of these four genes had no effect on either ethylene glycol or glycolic acid production; both formed from glycolaldehyde. YqhD exhibits ethylene glycol dehydrogenase activity in vitro. However, a low level of ethylene glycol was still synthesized by E. cloacae ΔyqhD. Fermentation parameters for ethylene glycol and glycolic acid production by the E. cloacae strain were optimized, and aerobic cultivation at neutral pH were found to be optimal. In fed batch culture, 34 g/L of ethylene glycol and 13 g/L of glycolic acid were produced in 46 h, with a total conversion ratio of 0.99 mol/mol xylonic acid. CONCLUSIONS: A novel route of xylose biorefinery via xylonic acid as an intermediate has been established.
Assuntos
Enterobacter cloacae/metabolismo , Etilenoglicol/metabolismo , Glicolatos/metabolismo , Xilose/análogos & derivados , Enterobacter cloacae/química , Etilenoglicol/química , Glicolatos/química , Xilose/química , Xilose/metabolismoRESUMO
Proteases are the most important group of industrial enzymes and they can be used in several fields including biorefineries for the valorization of industrial byproducts. In this study, we purified and characterized novel extremophilic proteases produced by a Pseudomonas aeruginosa strain isolated from Mauritia flexuosa palm swamps soil samples in Peruvian Amazon. In addition, we tested their ability to hydrolyze distillers dried grains with solubles (DDGS) protein. Three alkaline and thermophilic serine proteases named EI, EII, and EIII with molecular weight of 35, 40, and 55 kDa, respectively, were purified. EI and EIII were strongly inhibited by EDTA and Pefabloc being classified as serine-metalloproteases, while EII was completely inhibited only by Pefabloc being classified as a serine protease. In addition, EI and EII exhibited highest enzymatic activity at pH 8, while EIII at pH 11 maintaining almost 100% of it at pH 12. All the enzymes demonstrated optimum activity at 60°C. Enzymatic activity of EI was strongly stimulated in presence of Mn2+ (6.9-fold), EII was stimulated by Mn2+ (3.7-fold), while EIII was slightly stimulated by Zn2+ , Ca2+ , and Mg2+ . DDGS protein hydrolysis using purified Pseudomonas aeruginosa M211 proteases demonstrated that, based on glycine released, EIII presented the highest proteolytic activity toward DDGS. This enzyme enabled the release 63% of the total glycine content in wheat DDGS protein, 2.2-fold higher that when using the commercial Pronase®. Overall, our results indicate that this novel extremopreoteases have a great potential to be applied in DDGS hydrolysis. © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 35: e2728, 2019.
Assuntos
Peptídeo Hidrolases/metabolismo , Pseudomonas aeruginosa/enzimologia , Glicina/metabolismo , Concentração de Íons de Hidrogênio , HidróliseRESUMO
The availability of material for experimental studies is a key constraint in the development of full-scale bioprocesses. This is especially true for the later stages in a bioprocess sequence such as purification and formulation, where the product is at a relatively high concentration and traditional scale-down models can require significant volumes. Using a combination of critical flow regime analysis, bioprocess modelling, and experimentation, ultra scale-down (USD) methods can yield bioprocess information using only millilitre quantities before embarking on highly demanding full-scale studies. In this study the performance of a pilot-scale tangential flow filtration (TFF) system based on a membrane flat-sheet cassette using pumped flow was predicted by devising an USD device comprising a stirred cell using a rotating disc. The USD device operates with just 2.1 cm2 of membrane area and, for example, just 1.7 mL of feed for diafiltration studies. The novel features of the design involve optimisation of the disc location and the membrane configuration to yield an approximately uniform shear rate. This is characterised using computational fluid dynamics for a defined layer above the membrane surface. A pilot-scale TFF device operating at ~500-fold larger feed volume and membrane area was characterised in terms of the shear rate derived from flow rate-pressure drop relationships for the cassette. Good agreement was achieved between the USD and TFF devices for the flux and resistance values at equivalent average shear rates for a monoclonal antibody diafiltration stage.
Assuntos
Anticorpos Monoclonais , Ultrafiltração/instrumentação , Ultrafiltração/métodos , Anticorpos Monoclonais/química , Anticorpos Monoclonais/isolamento & purificação , Anticorpos Monoclonais/metabolismo , Simulação por Computador , Desenho de Equipamento , Membranas ArtificiaisRESUMO
The dataset presented in this article is related to the research article entitled "One-pot, two-step transaminase and transketolase synthesis of l-gluco-heptulose from l-arabinose" (Bawn et al., 2018 in press) [1]. This article presents data on initial experiments that were carried out to investigate new thermostable transketolase (TK) activities with l-arabinose. Transaminase (TAm) sequences from an in-house library of thermophilic strains were analyzed to compare homologies to characterized TAms with desired activity. DNA and amino acid sequences are presented for all the enzymes investigated. Calibration curves for products of the TK and TAm reactions are also presented along with chromatographic analysis of the various one-pot reactions.
RESUMO
Sugar beet pulp (SBP) fractionated by steam explosion, released sugar beet pectin (SB-pectin) which was selectively hydrolysed using a novel α-l-arabinofuranosidase (AF), yielding monomeric l-arabinose (Ara) and a galacturonic acid rich backbone (GABB). AF was immobilised on an epoxy-functionalised resin with 70% overall immobilisation yield. Pretreatment of SB-pectin, to remove coloured compounds, improved the stability of the immobilised AF, allowing its reutilisation for up to 10 reaction cycles in a stirred tank reactor. Continuous hydrolysis of SB-pectin was subsequently performed using a packed bed reactor (PBR) with immobilised AF. Reactor performance was evaluated using a Design of Experiment approach. Pretreated SB-pectin hydrolysis was run for 7 consecutive days maintaining 73% of PBR performance. Continuous separation of Ara from GABB was achieved by tangential flow ultrafiltration with 92% Ara recovery. These results demonstrate the feasibility of establishing a continuous bioprocess to obtain Ara from the inexpensive SBP biomass.
Assuntos
Beta vulgaris , Pectinas , Arabinose , Reatores Biológicos , Hidrólise , AçúcaresRESUMO
The use of biocatalysis for the synthesis of high value added chemical building blocks derived from biomass is becoming an increasingly important application for future sustainable technologies. The synthesis of a higher value chemical from l-arabinose, the predominant monosaccharide obtained from sugar beet pulp, is demonstrated here via a transketolase and transaminase coupled reaction. Thermostable transketolases derived from Deinococcus geothermalis and Deinococcus radiodurans catalysed the synthesis of l-gluco-heptulose from l-arabinose and ß-hydroxypyruvate at elevated temperatures with high conversions. ß-Hydroxypyruvate, a commercially expensive compound used in the transketolase reaction, was generated in situ from l-serine and α-ketoglutaric acid via a thermostable transaminase, also from Deinococcus geothermalis. The two steps were investigated and implemented in a one-pot system for the sustainable and efficient production of l-gluco-heptulose.