Field testing of a household-scale onsite blackwater treatment system in Coimbatore, India.

4.2 billion people live without access to safely managed sanitation services. This report describes the field testing of an onsite prototype system designed to treat blackwater from a single flush toilet and reuse of the treated effluent for flushing. The system passes wastewater through a solid-liquid separator followed by settling tanks and granular activated carbon columns into an electrochemical reactor that oxidizes chloride salts from urine to generate chlorine to remove pathogens. The objectives of the study were to verify the functionality of the system (previously demonstrated in the laboratory) under realistic use conditions, to identify maintenance requirements, and to make a preliminary assessment of the system's user acceptability. The prototype was installed in a women's workplace and residential toilet block in Coimbatore, India, and tested over a period of 10 months. The treated water met stringent disinfection threshold for both E. coli and helminth eggs and produced a clear, colorless effluent that met or nearly met local and international discharge standards for non-sewered sanitation systems. The effluent had an average chemical oxygen demand of 81 mg/L, total suspended solids of 11 mg/L, and reduction of total nitrogen by 65%. These tests determined the recommended service lifetimes and maintenance intervals for key system components including the electrochemical cell, granular activated carbon columns, and solid-liquid separator. User feedback regarding the use of treated blackwater as flush water was positive. These findings will inform the design and implementation of next-generation systems currently under development.

Field testing of a household-scale onsite blackwater treatment system in South Africa.

Innovations that enable cost-effective and resource-conserving treatment of human waste are required for the 4.2 billion people in the world who currently lack safe and reliable sanitation services. Onsite treatment and reuse of blackwater is one strategy towards this end, greatly reducing the need to transport wastewater over long distances either via sewers or trucks. Here, we report on the field testing of a prototype onsite blackwater treatment system conducted over a period of 8 months. The system was connected to a women's toilet in a public communal ablution block located in an informal settlement near Durban, South Africa. Liquid waste was treated by separation and diversion of large solids, settling of suspended solids, and filtration through activated carbon prior to disinfection by electrochemical oxidation. System performance was monitored daily by measurement of chemical and physical water quality parameters onsite and confirmed by periodic detailed analysis of chemical and biological parameters at an offsite lab. Daily monitoring of system performance indicated that the effluent had minimal color and turbidity (maximum 90 Pt/Co units and 6.48 NTU, respectively), and consistent evolution of chlorine as blackwater passed through the system. Weekly offsite analysis confirmed that the system consistently inactivated pathogens (E. coli and coliforms) and reduced chemical oxygen demand and total suspended solids to meet ISO 30500 category B standards. Significant reductions in total nitrogen load were also observed, though these reductions often fell short of the 70% reduction required by ISO 30500. No significant reduction in total phosphorus was observed. Maintenance requirements were identified, and the resilience of the system to restart following a prolonged shutdown was demonstrated, but significant improvements are required in the design of the solid/liquid separation mechanism for application of this system in a wiping culture.

Remediation of suspended solids and turbidity by improved settling tank design in a small-scale, free-standing toilet system using recycled blackwater.

Our research is focused on the development of decentralized waste water treatment technologies enabling onsite water reuse. Accumulation of solids with recycling of treated blackwater increases the energy required for disinfection with an electrochemical process. We hypothesized that improving the preprocess settling of blackwater by increasing the tortuosity of the liquid flow path would reduce this energy demand by reducing particle-associated chemical oxygen demand (COD). This approach successfully reduced the total suspended solids and turbidity in the process liquid accumulated per user-day equivalent. A modest reduction in the apparent steady-state accumulation of COD was also observed, likely because of the retention of COD associated with larger particles in the settling tanks. Interestingly, these improvements did not improve the energy efficiency of the electrochemical disinfection process, as predicted. These observations suggest that improving the energy efficiency of electrochemical disinfection will require remediation of dissolved COD.

A granular activated carbon/electrochemical hybrid system for onsite treatment and reuse of blackwater.

Over 1/3 of the global population lacks access to improved sanitation, leading to disease, death, and impaired economic development. Our group is working to develop rapidly deployable, cost-effective, and sustainable solutions to this global problem that do not require significant investments in infrastructure. Previously, we demonstrated the feasibility of a toilet system that recycles blackwater for onsite reuse as flush water, in which the blackwater is electrochemically treated to remove pathogens due to fecal contamination. However, this process requires considerable energy (48-93 kJ/L) to achieve complete disinfection of the process liquid, and the disinfected liquid retains color and chemical oxygen demand (COD) in excess of local discharge standards, negatively impacting user acceptability. Granular activated carbon (GAC) efficiently reduces COD in concentrated wastewaters. We hypothesized that reduction of COD with GAC prior to electrochemical treatment would both improve disinfection energy efficiency and user acceptability of the treated liquid. Here we describe the development and testing of a hybrid system that combines these technologies and demonstrate its ability to achieve full disinfection with improved energy efficiency and liquid quality more suitable for onsite reuse and/or discharge.