Cellular stress affects the fate of microbial resistance to folate inhibitors in treatment wetlands.

The environmental prevalence of antimicrobial resistance (AMR) has come into focus under the One Health concept. Wastewater treatment systems are among the significant sources of AMR in the environment. In such systems, it is uncertain to which extent antimicrobials present at sub-inhibitory concentrations constitute a selective pressure for bacterial maintenance and acquisition of antibiotic resistance (AR) genes. Here, we mapped AMR to inhibitors of folate biosynthesis in an aerated and a non-aerated horizontal subsurface flow treatment wetland receiving the same pre-treated municipal wastewater. General water characteristics and the concentrations of folate inhibitors were determined to define the ambient conditions over the longitudinal axis of the two treatment wetlands. Profiling of AMR as well as class 1 integrons, a carrier of AR genes against folate inhibitors and other antimicrobials, was conducted by cultivation-dependent and -independent methods. The wetlands achieved mean reductions of AR gene copy numbers in the effluents of at least 2 log, with the aerated system performing better. The folate inhibitors had no noticeable effect on the prevalence of respective AR genes. However, there was a transient increase of AR gene copy numbers and AR gene cassette composition in class 1 integrons in the aerated wetland. The comparison of all data from both wetlands suggests that higher levels of cellular stress in the aerated system promoted the mobility of AR genes via enhancing the activity of the DNA recombinase of the class 1 integron. The findings highlight that environmental conditions that modulate the activity of this genetic element can be more important for the fate of associated AR genes in treatment wetlands than the ambient concentration of the respective antimicrobial agents. By extrapolation, the results suggest that cellular stress also contributes to the mobility of AR gene in other wastewater treatment systems.

Small streams-large concentrations? Pesticide monitoring in small agricultural streams in Germany during dry weather and rainfall.

Few studies have examined the exposure of small streams (< 30 km2 catchment size) to agriculturally used pesticides, compared to large rivers. A total of 105 sites in 103 small agricultural streams were investigated for 76 pesticides (insecticides, herbicides, fungicides) and 32 pesticide metabolites in spring and summer over two years (2018 and 2019) during dry weather and rainfall using event-driven sampling. The median total concentration of the 76 pesticides was 0.18 µg/L, with 9 pesticides per sample on average (n = 815). This is significantly higher than monitoring data for larger streams, reflecting the close proximity to agricultural fields and the limited dilution by non-agricultural waters. The frequency of detection of all pesticides correlated with sales quantity and half-lives in water. Terbuthylazine, MCPA, boscalid, and tebuconazole showed the highest median concentrations. The median of the total concentration of the 32 metabolites exceeded the pesticide concentration by more than an order of magnitude. During dry weather, the median total concentration of the 76 pesticides was 0.07 µg/L, with 5 pesticides per sample on average. Rainfall events increased the median total pesticide concentration by a factor of 10 (to 0.7 µg/L), and the average number of pesticides per sample to 14 (with up to 41 in single samples). The concentration increase was particularly strong for 2,4-D, MCPA, terbuthylazine, and nicosulfuron (75 percentile). Metabolite concentrations were generally less responsive to rainfall, except for those of terbuthylazine, flufenacet, metamitron, and prothioconazole. The frequent and widespread exceedance of the regulatory acceptable concentrations (RAC) of the 76 pesticides during both, dry weather and rainfall, suggests that current plant protection product authorization and risk mitigation methods are not sufficient to protect small streams.

Pesticides are the dominant stressors for vulnerable insects in lowland streams.

Despite elaborate regulation of agricultural pesticides, their occurrence in non-target areas has been linked to adverse ecological effects on insects in several field investigations. Their quantitative role in contributing to the biodiversity crisis is, however, still not known. In a large-scale study across 101 sites of small lowland streams in Central Europe, Germany we revealed that 83% of agricultural streams did not meet the pesticide-related ecological targets. For the first time we identified that agricultural nonpoint-source pesticide pollution was the major driver in reducing vulnerable insect populations in aquatic invertebrate communities, exceeding the relevance of other anthropogenic stressors such as poor hydro-morphological structure and nutrients. We identified that the current authorisation of pesticides, which aims to prevent unacceptable adverse effects, underestimates the actual ecological risk as (i) measured pesticide concentrations exceeded current regulatory acceptable concentrations in 81% of the agricultural streams investigated, (ii) for several pesticides the inertia of the authorisation process impedes the incorporation of new scientific knowledge and (iii) existing thresholds of invertebrate toxicity drivers are not protective by a factor of 5.3 to 40. To provide adequate environmental quality objectives, the authorisation process needs to include monitoring-derived information on pesticide effects at the ecosystem level. Here, we derive such thresholds that ensure a protection of the invertebrate stream community.

Negative electrospray ionization ion mobility spectrometry combined with paper-based molecular imprinted polymer disks: A novel approach for rapid target screening of trace organic compounds in water samples.

A novel approach for the rapid target screening of water contaminants in trace concentrations was applied for the determination of the artificial sweetener Acesulfame-K, an accepted municipal wastewater indicator. This new method combines the selective enrichment of target analytes on paper-based molecular imprinted polymer disks and the subsequent analysis using a modified ion mobility spectrometer allowing negative electrospray ionization (ESI-IMS). Our developed ion mobility spectrometer permits the sensitive detection of Acesulfame with a limit of detection of 93 µg L-1 within few seconds without sample separation. The use of modified paper filters for fast extraction and enrichment of the target substance from water samples results in a lower limit of detection of 0.19 µg L-1. This procedure is directly applicable in the field, the transport and the proper storage of bulky sample bottles is avoided. The capability of the procedure developed was demonstrated by measuring real samples from a river at locations upstream and downstream of the effluent of the central municipal waste water treatment plant. The quantitative data of ion mobility measurements show a very good agreement with those obtained with the commonly used standard procedure (high performance liquid chromatography-tandem mass spectrometry).

Novel aspects of uptake patterns, metabolite formation and toxicological responses in Salmon exposed to the organophosphate esters-Tris(2-butoxyethyl)- and tris(2-chloroethyl) phosphate.

Given the compound differences between tris(2-butoxyethyl)- and tris(2-cloroethyl) phosphate (TBOEP and TCEP, respectively), we hypothesized that exposure of juvenile salmon to TBOEP and TCEP will produce compound-specific differences in uptake and bioaccumulation patterns, resulting in potential formation of OH-metabolites. Juvenile salmon were exposed to waterborne TCEP or TBOEP (0.04, 0.2 and 1 mg/L) for 7 days. The muscle accumulation was measured and bioconcentration factor (BCF) was calculated, showing that TCEP was less accumulative and resistant to metabolism in salmon than TBOEP. Metabolite formations were only detected in TBOEP-exposed fish, showing seven phase I biotransformation metabolites with hydroxylation, ether cleavage or combination of both reactions as important metabolic pathways. In vitro incubation of trout S9 liver fraction with TBOEP was performed showing that the generated metabolite patterns were similar to those found in muscle tissue exposed in vivo. However, another OH-TBOEP isomer and an unidentified metabolite not present in in vivo exposure were observed with the trout S9 incubation. Overall, some of the observed metabolic products were similar to those in a previous in vitro report using human liver microsomes and some metabolites were identified for the first time in the present study. Toxicological analysis indicated that TBOEP produced less effect, although it was taken up faster and accumulated more in fish muscle than TCEP. TCEP produced more severe toxicological responses in multiple fish organs. However, liver biotransformation responses did not parallel the metabolite formation observed in TBOEP-exposed fish.

A new strategy for accelerated extraction of target compounds using molecularly imprinted polymer particles embedded in a paper-based disk.

In this study, a general simple and inexpensive method is introduced for the preparation of a paper-based selective disk-type solid phase extraction (SPE) technique, appropriate for fast and high throughput monitoring of target compounds. An ion exchange molecularly imprinted polymer (MIP) was synthesized for the extraction and analysis of acesulfame, an anthropogenic water quality marker. Acesulfame imprinting was used as an example for demonstrating the benefits of a nanosized, swellable MIP extraction sorbents integrated in an on-site compatible concept for water quality monitoring. Compared with an 8 mL standard SPE cartridge, the paper-based MIP disk (47 mm ø) format allowed (1) high sample flow rates up to 30 mL•min-1 without losing extraction efficiency (2) extracting sample volumes up to 500 mL in much shorter times than with standard SPE, (3) the reuse of the disks (up to 3 times more than SPE cartridge) due to high robustness and an efficient post-cleaning, and (4) reducing the sampling time from 100 minutes (using the standard SPE format) to about 2 minutes with the MIP paper disk for 50 mL water sample. Different parameters like cellulose fiber/polymer ratios, sample volume, sample flow-rate, washing, and elution conditions were evaluated and optimized. Using developed extraction technique with high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS-MS) analysis, a new protocol was established that provides detection and quantification limits of 0.015 µg•L-1 and 0.05 µg•L-1 , respectively. The developed paper disks were used in-field for the selective extraction of target compounds and transferred to the laboratory for further analysis.

Simultaneous determination of 41 multiclass organic pollutants in environmental waters by means of polyethersulfone microextraction followed by liquid chromatography-tandem mass spectrometry.

A new procedure using polyethersulfone (PES) microextraction followed by liquid chromatography-tandem mass spectrometry (LC-MS/MS) analysis was developed in this work for the simultaneous determination of 41 multiclass priority and emerging organic pollutants including herbicides, hormones, personal care products, and pharmaceuticals, among others, in seawater, wastewater treatment plant (WWTP) effluents, and estuary samples. The optimization of the analysis included two different chromatographic columns and different variables (polarity, fragmentor voltage, collision energy, and collision cell accelerator) of the mass spectrometer. In the case of PES extraction, ion strength of the water, pH, addition of EDTA, and the amount of the polymeric material were thoroughly investigated. The developed procedure was compared with a previously validated one based on a standard solid-phase extraction (SPE). In contrast to the SPE protocol, the PES method allowed a cost-efficient extraction of complex aqueous samples with lower matrix effect from 120 mL of water sample. Satisfactory and comparable apparent recovery values (80-119 and 70-131%) and method quantification limits (MQLs, 0.4-26 and 0.2-23 ng/L) were obtained for PES and SPE procedures, respectively, regardless of the matrix. Repeatability values lower than 27% were obtained. Finally, the developed methods were applied to the analysis of real samples from the Basque Country and irbesartan, valsartan, acesulfame, and sucralose were the analytes most often detected at the highest concentrations (51-1096 ng/L). Graphical abstract Forty-one multiclass pollutant determination in environmental waters by means of PES/SPE-LC-MS/MS.

Differential modulation of neuro- and interrenal steroidogenesis of juvenile salmon by the organophosphates - tris(2-butoxyethyl)- and tris(2-cloroethyl) phosphate.

Following the ban of polybrominated diphenyl ether (PBDEs) flame retardants under well-documented toxicity issues, organophosphate such as tris(2-butoxyethyl) phosphate (TBOEP) and tris(2-cloroethyl) phosphate (TCEP) were considered as potential substitutes. Although TBOEP and TCEP are consistently detected in the aquatic environment, there are few data about the possible toxicological effects of these compounds on aquatic organisms, including fish. In the present study, we have investigated the influence of TBOEP and TCEP on neuro- and interrenal steroidogenesis of juvenile Atlantic salmon (Salmo salar), after a seven-day exposure to four different concentrations (0 (control), 0.04, 0.2 and 1mg/L) of each compound. TBOEP and TCEP were diluted in Milli-Q water. The expression of genes involved in steroidogenesis (StAR, cyp19a, cyp19b, cholesterol side-chain cleavage enzyme (P450scc), 3ß-hydroxysteroid dehydrogenase (3ß-hsd), and 11ß-hydroxylase (cyp11ß)), were analyzed in the brain and head kidney using real-time PCR. Plasma 11-ketotestosterone (11-KT) analysis was performed using enzyme immunoassay (EIA). Our results showed that TBOEP accumulated more rapidly than TCEP in fish muscle tissue. Surprisingly, TBOEP produced less pronounced effects than TCEP on neural and interrenal steroidogenic responses, despite the observed rapid uptake and bioaccumulation pattern. Specifically, TBOEP produced significant and consistent concentration-specific alterations on neural- and interrenal steroidogenesis. Plasma levels of 11-KT were not significantly altered by any of the exposures. The increased expression of steroidogenic genes demonstrated in the present study could produce time-specific alterations in the production of glucocorticoids and steroid hormones that play integral roles in fish metabolism, stress responses and adaptation, sexual maturation, reproduction and migration with overt consequences on reproductive success and survival.

Multi-class method for biomonitoring of hair samples using gas chromatography-mass spectrometry.

Currently, non-invasive biomonitoring of human exposure to organic pollutants bases upon the analysis mainly of urine and human breast milk. While mostly persistent organic pollutants are the center of interest, the aim of our study was to develop a method for the determination of different chemical classes of emerging pollutants (organophosphorus flame retardants, plastic additives such as phthalates, bisphenol A, insecticides, antimicrobials, preservatives and musk fragrances) in hair by gas chromatography-mass spectrometry. The preferred sample preparation included hydrolysis of the hair with trifluoroacetic acid in methanol followed by a liquid-liquid extraction using hexane/ethyl acetate. The validated method is characterized by recoveries higher than 77 % for most analytes, relative standard deviations below 16 % and limits of detection between 2 pg mg(-1) (HHCB) and 292 pg mg(-1) (propylparaben) using 50 mg of dry hair. After respective blank corrections, bis-(2-ethylhexyl)phthalate (DEHP) and the musk fragrance HHCB were the predominant compounds determined in all hair samples at concentrations between 32 and 59 ng mg(-1) and 0.8-13 ng mg(-1), respectively. The bactericide triclosan and the insect repellent N,N-diethyl-3-methylbenzamide (DEET) were detected in selected hair samples at 2 and 0.8 ng mg(-1), respectively.

Ion-exchange molecularly imprinted polymer for the extraction of negatively charged acesulfame from wastewater samples.

Acesulfame is a known indicator that is used to identify the introduction of domestic wastewater into water systems. It is negatively charged and highly water-soluble at environmental pH values. In this study, a molecularly imprinted polymer (MIP) was synthesized for negatively charged acesulfame and successfully applied for the selective solid phase extraction (SPE) of acesulfame from influent and effluent wastewater samples. (Vinylbenzyl)trimethylammonium chloride (VBTA) was used as a novel phase transfer reagent, which enhanced the solubility of negatively charged acesulfame in the organic solvent (porogen) and served as a functional monomer in MIP synthesis. Different molecularly imprinted polymers were synthesized to optimize the extraction capability of acesulfame. The different materials were evaluated using equilibrium rebinding experiments, selectivity experiments and scanning electron microscopy (SEM). The most efficient MIP was used in a molecularly imprinted-solid phase extraction (MISPE) protocol to extract acesulfame from wastewater samples. Using high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS-MS) analysis, detection and quantification limits were achieved at 0.12µgL(-1) and 0.35µgL(-1), respectively. Certain cross selectivity for the chemical compounds containing negatively charged sulfonamide functional group was observed during selectivity experiments.

Pesticide impact on aquatic invertebrates identified with Chemcatcher® passive samplers and the SPEAR(pesticides) index.

Pesticides negatively affect biodiversity and ecosystem function in aquatic environments. In the present study, we investigated the effects of pesticides on stream macroinvertebrates at 19 sites in a rural area dominated by forest cover and arable land in Central Germany. Pesticide exposure was quantified with Chemcatcher® passive samplers equipped with a diffusion-limiting membrane. Ecological effects on macroinvertebrate communities and on the ecosystem function detritus breakdown were identified using the indicator system SPEARpesticides and the leaf litter degradation rates, respectively. A decrease in the abundance of pesticide-vulnerable taxa and a reduction in leaf litter decomposition rates were observed at sites contaminated with the banned insecticide Carbofuran (Toxic Units≥-2.8), confirming the effect thresholds from previous studies. The results show that Chemcatcher® passive samplers with a diffusion-limiting membrane reliably detect ecologically relevant pesticide pollution, and we suggest Chemcatcher® passive samplers and SPEARpesticides as a promising combination to assess pesticide exposure and effects in rivers and streams.

Selective mixed-bed solid phase extraction of atrazine herbicide from environmental water samples using molecularly imprinted polymer.

A novel approach for the selective extraction of organic target compounds from water samples has been developed using a mixed-bed solid phase extraction (mixed-bed SPE) technique. The molecularly imprinted polymer (MIP) particles are embedded in a network of silica gel to form a stable uniform porous bed. The capabilities of this method are demonstrated using atrazine as a model compound. In comparison to conventional molecularly imprinted-solid phase extraction (MISPE), the proposed mixed-bed MISPE method in combination with gas chromatography-mass spectrometry (GC-MS) analysis enables more reproducible and efficient extraction performance. After optimization of operational parameters (polymerization conditions, bed matrix ingredients, polymer to silica gel ratio, pH of the sample solution, breakthrough volume plus washing and elution conditions), improved LODs (1.34 µg L(-1) in comparison to 2.25 µg L(-1) obtained using MISPE) and limits of quantification (4.5 µg L(-1) for mixed-bed MISPE and 7.5 µg L(-1) for MISPE) were observed for the analysis of atrazine. Furthermore, the relative standard deviations (RSDs) for atrazine at concentrations between 5 and 200 µg L(-1) ranged between 1.8% and 6.3% compared to MISPE (3.5-12.1%). Additionally, the column-to-column reproducibility for the mixed-bed MISPE was significantly improved to 16.1%, compared with 53% that was observed for MISPE. Due to the reduced bed-mass sorbent and at optimized conditions, the total amount of organic solvents required for conditioning, washing and elution steps reduced from more than 25 mL for conventional MISPE to less than 2 mL for mixed-bed MISPE. Besides reduced organic solvent consumption, total sample preparation time of the mixed-bed MISPE method relative to the conventional MISPE was reduced from more than 20 min to less than 10 min. The amount of organic solvent required for complete elution diminished from 3 mL (conventional MISPE) to less than 0.4 mL with the mixed-bed technique shows its inherent potential for online operation with an analytical instrument. In order to evaluate the selectivity and matrix effects of the developed mixed-bed MISPE method, it was applied as an extraction technique for atrazine from environmental wastewater and river water samples.

Evaluation of polyethersulfone performance for the microextraction of polar chlorinated herbicides from environmental water samples.

In this work, the suitability of bulk polyethersulfone (PES) for sorptive microextraction of eight polar, chlorinated phenoxy acids and dicamba from environmental water samples is assessed and the analytical features of the optimized method are compared to those reported for other microextraction techniques. Under optimized conditions, extractions were performed with samples (18 mL) adjusted at pH 2 and containing a 30% (w/v) of sodium chloride, using a tubular PES sorbent (1 cm length × 0.7 mm o.d., sorbent volume 8 µL). Equilibrium conditions were achieved after 3h of direct sampling, with absolute extraction efficiencies ranging from 39 to 66%, depending on the compound. Analytes were recovered soaking the polymer with 0.1 mL of ethyl acetate, derivatized and determined by gas chromatography-mass spectrometry (GC-MS). Achieved quantification limits (LOQs) varied between 0.005 and 0.073 ng mL(-1). After normalization with the internal surrogate (IS), the efficiency of the extraction was only moderately affected by the particular characteristics of different water samples (surface and sewage water); thus, pseudo-external calibration, using spiked ultrapure water solutions, can be used as quantification technique. The reduced cost of the PES polymer allowed considering it as a disposable sorbent, avoiding variations in the performance of the extraction due to cross-contamination problems and/or surface modification with usage.

A new strategy for synthesis of an in-tube molecularly imprinted polymer-solid phase microextraction device: selective off-line extraction of 4-nitrophenol as an example of priority pollutants from environmental water samples.

In this study a novel preparation protocol has been developed for the construction of an in-tube molecularly imprinted polymer-solid phase microextraction (MIP-SPME) device. Open tubular capillaries have been molded from a polymer sorbent imprinted for 4-nitrophenol as target molecule. Different parameters like inner diameter and volume of the polymer, porogen volume, swelling and shrinking effects of the polymer tubes, polymerization time, pH of the sample, extraction time, 'salting out' effect and serial connection of the tubes were evaluated and optimized. Particularly, an optimized polymer preparation process and extraction condition enhanced the final extraction recovery of 4-nitrophenol substantially. Using this new MIP-SPME technique with high-performance liquid chromatography-ultraviolet (HPLC-UV) analysis of the extracts, the linear range and the limits of detection and quantification are 0.001-10 mg L(-1), 0.33 µg L(-1) and 1.1 µg L(-1) respectively. At optimized conditions, a mixture of nitrophenols, alkylated and chlorinated phenols spiked into municipal waste water were analyzed to evaluate the matrix effects and cross selectivity of the new MIP capillary tubes.

An artificial estrogen receptor through combinatorial imprinting.

Polymeric sorbents targeting endocrine-disrupting estrogen active compounds (EAC) were prepared by terpolymer imprinting using 17ß-estradiol (E2) as template. From a group of eight functional monomers representing Brønsted acids, bases, hydrogen-bond donors and acceptors, as well as π-interacting monomers, a terpolymer library that comprises all possible binary combinations of the functional monomers was prepared. Binding tests revealed that imprinted polymers exhibit a markedly higher affinity for E2 compared to nonimprinted polymers (NIPs) or polymers prepared by using single functional monomers. A combination of methacrylic acid (MAA) and p-vinylbenzoic acid offered a particularly promising lead polymer, displaying an imprinting factor of 17 versus 2.4 for a benchmark polymer prepared by using only MAA as functional monomer. The saturation capacities ascribed to imprinted sites were four to five times higher for this polymer compared to previously reported imprinted polymers. NMR titrations and molecular dynamics simulations corroborated these results, indicating an orthogonal preference of the two functional monomers with respect to the E2 3-OH and 17-OH groups. The optimized polymer exhibited a retentivity for EACs that correlates with their inhibitory effect on the natural receptor. By using the optimized molecularly imprinted polymers (MIPs) in a model water-purification system, they were capable of completely removing ppb levels of a small group of EACs from water. This is in contrast to the performance of nonimprinted polymers and well-established sorbents for water purification (e.g., active carbon), which still contained detectable amounts of the compounds after treatment.

Identification of degradation products of phenylarsonic acid and o-arsanilic acid in contact with suspensions of soils of volcanic origin.

A set of organoarsenicals were identified in aqueous phenylarsonic acid (PA) and o-arsanilic acid (AA) solutions treated with soil of volcanic origin in batch systems. The transformation products were separated by liquid chromatography (RP-LC) and identified with element selective inductively coupled plasma-mass spectrometry (ICP-MS) as well as molecular selective electrospray ionization-mass spectrometry (ESI-MS) detection after their HPLC separation. The identification of the main degradation products by means of ESI-MS, ESI-MS/MS and ESI-TOF-MS showed the occurrence of nitrophenylarsonic acid and methylphenylarsinic acid in the solutions containing AA and PA in contact with soils, respectively. Using irradiation of PA solution with visible light, new compounds related from PA appeared with increasing irradiation times which were identified as 4-hydroxyphenylarsonic acid, 3-hydroxyphenylarsonic acid and 2-hydroxyphenylarsonic acid. Additionally, a dihydroxyphenylarsonic compound was identified as impurity of PA.

Solid waste deposits as a significant source of contaminants of emerging concern to the aquatic and terrestrial environments - a developing country case study from Owerri, Nigeria.

In developing countries, there are needs for scientific basis to sensitize communities on the problems arising from improper solid waste deposition and the acute and long-term consequences for areas receiving immobilized pollutants. In Nigeria, as in many other African countries, solid waste disposal by way of open dumping has been the only management option for such wastes. Herein, we have highlighted the challenges of solid waste deposit and management in developing countries, focusing on contaminants of emerging concern and leaching into the environment. We have analyzed sediments and run-off water samples from a solid waste dumping site in Owerri, Nigeria for organic load and compared these with data from representative world cities. Learning from previous incidents, we intend to introduce some perspective for awareness of contaminants of emerging concerns such as those with potential endocrine disrupting activities in wildlife and humans. Qualitative and quantitative data obtained by gas chromatography and mass spectrometric analysis (GC-MS) provide an overview on lipophilic and semi-polar substances released from solid waste, accumulated in sediments and transported via leachates. The chromatograms of the full scan analyses of the sediment extracts clearly point to contamination related to heavy oil. The homologous series of n-alkanes with chain lengths ranging between C16 and C30, as well as detected polyaromatic hydrocarbon (PAH) compounds such as anthracene, phenanthrene, fluoranthene and pyrene support the assumption that diesel fuel or high boiling fractions of oil are deposited on the site. Targeted quantitative analysis for selected compounds showed high concentration of substances typically released from man-made products such as plastics, textiles, household and consumer products. Phthalate, an integral component of plastic products, was the dominant compound group in all sediment samples and run-off water samples. Technical nonylphenols (mixture of isomers), metabolites of non-ionic surfactants (nonylphenol-polyethoxylates), UV-filter compound ethyl methoxy cinnamate (EHMC) and bisphenol A (BPA) were particularly determined in the sediment samples at high µg/kg dry weight concentration. Measuring contaminants in such areas will help in increasing governmental, societal and industrial awareness on the extent and seriousness of the contamination both at waste disposal sites and surrounding terrestrial and aquatic environments.

Mixture toxicity of wood preservative products in the fish embryo toxicity test.

Wood preservative products are used globally to protect wood from fungal decay and insects. We investigated the aquatic toxicity of five commercial wood preservative products, the biocidal active substances and some formulation additives contained therein, as well as six generic binary mixtures of the active substances in the fish embryo toxicity test (FET). Median lethal concentrations (LC50) of the single substances, the mixtures, and the products were estimated from concentration-response curves and corrected for concentrations measured in the test medium. The comparison of the experimentally observed mixture toxicity with the toxicity predicted by the concept of concentration addition (CA) showed less than twofold deviation for all binary mixtures of the active substances and for three of the biocidal products. A more than 60-fold underestimation of the toxicity of the fourth product by the CA prediction was detected and could be explained fully by the toxicity of one formulation additive, which had been labeled as a hazardous substance. The reason for the 4.6-fold underestimation of toxicity of the fifth product could not be explained unambiguously. Overall, the FET was found to be a suitable screening tool to verify whether the toxicity of formulated wood preservatives can reliably be predicted by CA. Applied as a quick and simple nonanimal screening test, the FET may support approaches of applying component-based mixture toxicity predictions within the environmental risk assessment of biocidal products, which is required according to European regulations.

Evaluation of low-cost disposable polymeric materials for sorptive extraction of organic pollutants in water samples.

The capabilities of four commercially available and low cost polymeric materials for the extraction of polar and non-polar contaminants (logK(ow)=-0.07-6.88, from caffeine to octocrylene, respectively) from water samples was compared. Tested sorbents were polyethersulphone, polypropylene and Kevlar, compared to polydimethylsiloxane as reference material. Parameters that affect the extraction process such as pH and ionic strength of the sample, extraction time and desorption conditions were thoroughly investigated. A set of experimental partition coefficients (K(pw)), at two different experimental conditions, was estimated for the best suited materials and compared with the theoretical octanol-water (K(ow)) partition coefficients of the analytes. Polyethersulphone displayed the largest extraction yields for both polar and non-polar analytes, with higher K(pw) and lower matrix effects than polydimethylsiloxane and polypropylene. Thus, a sorptive microextraction method, followed by large volume injection (LVI) gas chromatography-tandem mass spectrometry (GC-MS/MS), was proposed using the former sorbent (2 mg) for the simultaneous determination of model compounds in water samples. Good linearity (>0.99) was obtained for most of the analytes, except in the case of 4-nonylphenol (0.9466). Precision (n=4) at 50 and 500 ng L(-1) levels was in the 2-24% and limits of detection (LODs) were in the 0.6-25 ng L(-1) range for all the analytes studied.

Degradation of the antibiotics norfloxacin and ciprofloxacin by a white-rot fungus and identification of degradation products.

More than 90% of the antibiotics ciprofloxacin (CIPRO) and norfloxacin (NOR) at 2 mg L(-1) were degraded by Trametes versicolor after 7 days of incubation in malt extract liquid medium. In in vitro assays with purified laccase (16.7 nkat mL(-1)), an extracellular enzyme excreted constitutively by this fungus, 16% of CIPRO was removed after 20 h. The addition of the laccase mediator 2,2-azino-bis-(3-ethylbenzthiazoline-6-sulfonic acid) diammonium salt led to 97.7% and 33.7% degradation of CIPRO and NOR, respectively. Inhibition of CIPRO and NOR degradation by the cytochrome P450 inhibitor 1-aminobenzotriazole suggests that the P450 system also plays a role in the degradation of the two antibiotics. Transformation products of CIPRO and NOR were monitored at different incubation times by triple-quadrupole and quadrupole time-of-flight mass spectrometry, and can be assigned to three different reaction pathways: (i) oxidation of the piperazinyl substituent, (ii) monohydroxylation, and (iii) formation of dimeric products.