Study on quantitative diagnosis model of TCM syndromes of post-stroke depression based on combination of disease and syndrome.

BACKGROUND: Post-stroke depression (PSD) is one of the most common stroke complications with high morbidity. Researchers have done much clinical research on Traditional Chinese Medicine (TCM) treatment, but very little research on diagnosis. Based on the thought of combination of disease and syndrome, this study will establish a unified and objective quantitative diagnosis model of TCM syndromes of PSD, so as to improve the clinical diagnosis and treatment of PSD. OBJECTIVE: First: To establish a unified and objective quantitative diagnosis model of TCM syndromes in PSD under different disease courses, and identify the corresponding main, secondary, and concurrent symptoms, which are based on the weighting factor of each TCM symptom. Second: To find out the relationship between different stages of PSD and TCM syndromes. Clarify the main syndrome types of PSD under different stages of disease. Reveal the evolution and progression mechanism of TCM syndromes of PSD. METHODS AND ANALYSIS: This is a retrospective study of PSD TCM diagnosis. Three hundred patients who were hospitalized in the First Teaching Hospital of Tianjin University of TCM with complete cases from January 2014 to January 2019 are planned to be recruited. The study will mainly collect the diagnostic information from the cases, find the related indicators of TCM and Western medicine in PSD, and clarify the relationship between different disease stages and TCM syndromes. Finally, the PSD TCM syndrome quantitative diagnosis model will be established based on the operation principle of Back Propagation (BP) artificial neural network. CONCLUSION: To collect sufficient medical records and establish models to speed up the process of TCM diagnosis.

Effect of V2O5 on the properties of mullite ceramics synthesized from high-aluminum fly ash and bauxite.

In this communication, high-strength mullite ceramics was prepared from bauxite and high-aluminum fly ash that is a by-product of coal combustion in thermal power plants. The effects of the doping V(2)O(5) on the bulk density, apparent porosity, bending strength and microstructure of mullite ceramics were studied in detail. It was indicated that 5-10 mol% V(2)O(5) reduced the sintering temperature by 50 degrees C. The apparent porosity and water absorption of the mullite ceramics decreased with increasing V(2)O(5) content. Mullite ceramics with bending strength as high as 108 MPa were obtained at 1500 degrees C with the addition of 10 mol% V(2)O(5). X-ray diffraction analysis suggested that the prepared ceramics was mainly in phase of mullite, and scanning electron microscope images confirmed that it mostly existed in the shape of a long parallelepiped. This research may provide a new method in utilizing the vast resources of fly-ash waste from power plants in the production of low-cost mullite-based engineering materials.

The synthesis of mesoporous aluminosilicate using microcline for adsorption of mercury(II).

An economical mesoporous aluminosilicate was synthesized with microcline as starting material and the precursor 13X zeolite as seed for crystal structure on mesoporous walls. In this method, a mixture of microcline and Na2CO3 with a molar ratio of 1:1.05 was first calcined at 1093 K for 2.5 h. The calcined materials were mixed with 35 ml C16TMABr aqueous solution (containing 8.2 g C16TMABr) and the precursors of 13X zeolite, resulting in mesoporous aluminosilicate after crystallization of the solution at 378 K for 48 h and calcination of the powder at 823 K for 5 h. The as-synthesized sample has a uniform pore diameter distribution centered at 3.7 nm. The as-synthesized sample had BET surface area of 725 m2/g and BJH mean pore diameter of 3.7 nm. The FT-IR results revealed that the building units of 13X zeolite were inserted into the pore walls of the as-synthesized sample. The adsorption ratio of mercury(II) onto the as-synthesized adsorbent was about 95%. The adsorption process was found to be spontaneous and can be explained by particle diffusion and chemical ion-exchange mechanisms. The equilibrium concentration of mercury(II) using the as-synthesized sample as the adsorbent was under 1 microg/L, making the concentration of mercury meet the limit for drinking water in China as recommended by the World Health Organization.

Treatment of landfill leachate by ozone-based advanced oxidation processes.

In this study, laboratory experiments are conducted to compare the efficacy using several ozone-based advanced oxidation processes (AOPs), such as O3, O3/H2O2, and O3/UV, to treat landfill leachate. Raw leachate was initially coagulated by ferric chloride (FeCl3) at the experimental-determined optimal dosage of 900 mgl(-1), and the ozone-based AOPs were subsequently applied. Results indicate that all AOPs would result in a significant increase on the ratio of BOD5/COD from 0.06 to 0.5 at the applied ozone dosage of 1.2 gl(-1). The increase on biodegradability for ozonated leachate indicates that these AOPs would be beneficial to the subsequent biological treatment process. To better explain the alteration of high organic molecules after oxidation, ultrafiltration was used to separate the leachate by several molecular weight cutoffs (MWCO). The COD distribution for coagulated leachate is 34% for MWCO>10 kDa, 7% for MWCO between 5 and 10 kDa, 22% for MWCO between 1 and 5 kDa, and 37% for MWCO<1 kDa. Following ozonation or AOPs, the predominant distribution of COD would be obviously shifted to the MWCO less than 1000 gmol(-1) (72-85%) over the other MWCO ranges. In addition, Gel Permeation Chromatograph (GPC) analysis has showed a substantial agreement on the cleavage of larger organic compounds into smaller ones. O3/UV was found to be the most effective approach among these ozone-based AOPs to enhancing the biodegradability and eliminating the color of leachate.