Coupling of the Structure and Magnetism to Spin Splitting in Hybrid Organic-Inorganic Perovskites.

Hybrid organic-inorganic perovskites are famous for the diversity of their chemical compositions, phases, phase transitions, and associated physical properties. We use a combination of experimental and computational techniques to reveal a strong coupling between structure, magnetism, and spin splitting in a representative of the largest family of hybrid organic-inorganic perovskites: the formates. With the help of first-principles simulations, we find spin splitting in both conduction and valence bands of [NH2NH3]Co(HCOO)3 induced by spin-orbit interactions, which can reach up to 14 meV. Our magnetic measurements reveal that this material exhibits canted antiferromagnetism below 15.5 K. The direction of the associated antiferromagnetic order parameter is strongly coupled with spin splitting in the centrosymmetric phase, allowing for the creation and annihilation of spin splitting through the application of a magnetic field. Furthermore, the structural phase transition to the experimentally observed polar Pna21 phase completely changes the aforementioned spin splitting and its coupling to magnetic degrees of freedom. This reveals that in [NH2NH3]Co(HCOO)3, the structure and magnetism are strongly coupled to spin splitting and can be manipulated through electric and magnetic fields. We believe that our findings offer an important step toward a fundamental understanding and practical applications of materials with coupled properties.

A Copper-Based Metal-Organic Framework for Selective Separation of C2 Hydrocarbons from Methane at Ambient Conditions: Experiment and Simulation.

C2 hydrocarbon separation from methane represents a technological challenge for natural gas upgrading. Herein, we report a new metal-organic framework, [Cu2L(DEF)2]·2DEF (UNT-14; H4L = 4,4',4″,4‴-((1E,1'E,1″E,1‴E)-benzene-1,2,4,5-tetrayltetrakis(ethene-2,1-diyl))tetrabenzoic acid; DEF = N,N-diethylformamide; UNT = University of North Texas). The linker design will potentially increase the surface area and adsorption energy owing to π(hydrocarbon)-π(linker)/M interactions, hence increasing C2 hydrocarbon/CH4 separation. Crystallographic data unravel an sql topology for UNT-14, whereby [Cu2(COO)4]···[L]4- paddle-wheel units afford two-dimensional porous sheets. Activated UNT-14a exhibits moderate porosity with an experimental Brunauer-Emmett-Teller (BET) surface area of 480 m2 g-1 (vs 1868 m2 g-1 from the crystallographic data). UNT-14a exhibits considerable C2 uptake capacity under ambient conditions vs CH4. GCMC simulations reveal higher isosteric heats of adsorption (Qst) and Henry's coefficients (KH) for UNT-14a vs related literature MOFs. Ideal adsorbed solution theory yields favorable adsorption selectivity of UNT-14a for equimolar C2Hn/CH4 gas mixtures, attaining 31.1, 11.9, and 14.8 for equimolar mixtures of C2H6/CH4, C2H4/CH4, and C2H2/CH4, respectively, manifesting efficient C2 hydrocarbon/CH4 separation. The highest C2 uptake and Qst being for ethane are also desirable technologically; it is attributed to the greatest number of "agostic" or other dispersion C-H bond interactions (6) vs 4/2/4 for ethylene/acetylene/methane.

Tailoring the Coordination Micro-Environment in Nanotraps for Efficient Platinum/Palladium Separation.

Recovering platinum group metals from secondary resources is crucial to meet the growing demand for high-tech applications. Various techniques are explored, and adsorption using porous materials has emerged as a promising technology due to its efficient performance and environmental beingness. However, the challenge lies in effectively recovering and separating individual platinum group metals (PGMs) given their similar chemical properties. Herein, a breakthrough approach is presented by sophisticatedly tailoring the coordination micro-environment in a series of aminopyridine-based porous organic polymers, which enables the creation of platinum-specific nanotraps for efficient separation of binary PGMs (platinum/palladium). The newly synthesized POP-o2NH2-Py demonstrates record uptakes and selectivity toward platinum over palladium, with the amino groups adjacent to the pyridine moieties being vital in improving platinum binding performance. Further breakthrough experiments underline its remarkable ability to separate platinum and palladium. Spectroscopic analysis reveals that POP-o2NH2-Py offers a more favorable coordination fashion to platinum ions compared to palladium ions owing to the greater interaction between N and Pt4+ and stronger intramolecular hydrogen bonding between the amino groups and four coordinating chlorines at platinum. These findings underscore the importance of fine-tuning the coordination micro-environment of nanotraps through subtle modifications that can greatly enhance the selectivity toward the desired metal ions.

Bifunctional Metal-Organic Nanoballs Featuring Lewis Acidic and Basic Sites as a New Platform for One-Pot Tandem Catalysis.

The design and synthesis of polyhedra using coordination-driven self-assembly has been an intriguing research area for synthetic chemists. Metal-organic polyhedra are a class of intricate molecular architectures that have garnered significant attention in the literature due to their diverse structures and potential applications. Hereby, we report Cu-MOP, a bifunctional metal-organic cuboctahedra built using 2,6-dimethylpyridine-3,5-dicarboxylic acid and copper acetate at room temperature. The presence of both Lewis basic pyridine groups and Lewis acidic copper sites imparts catalytic activity to Cu-MOP for the tandem one-pot deacetalization-Knoevenagel/Henry reactions. The effect of solvent system and time duration on the yields of the reactions was studied, and the results illustrate the promising potential of these metal-organic cuboctahedra, also known as nanoballs for applications in catalysis.

Engineering the pore environment of antiparallel stacked covalent organic frameworks for capture of iodine pollutants.

Radioiodine capture from nuclear fuel waste and contaminated water sources is of enormous environmental importance, but remains technically challenging. Herein, we demonstrate robust covalent organic frameworks (COFs) with antiparallel stacked structures, excellent radiation resistance, and high binding affinities toward I2, CH3I, and I3- under various conditions. A neutral framework (ACOF-1) achieves a high affinity through the cooperative functions of pyridine-N and hydrazine groups from antiparallel stacking layers, resulting in a high capacity of ~2.16 g/g for I2 and ~0.74 g/g for CH3I at 25 °C under dynamic adsorption conditions. Subsequently, post-synthetic methylation of ACOF-1 converted pyridine-N sites to cationic pyridinium moieties, yielding a cationic framework (namely ACOF-1R) with enhanced capacity for triiodide ion capture from contaminated water. ACOF-1R can rapidly decontaminate iodine polluted groundwater to drinking levels with a high uptake capacity of ~4.46 g/g established through column breakthrough tests. The cooperative functions of specific binding moieties make ACOF-1 and ACOF-1R promising adsorbents for radioiodine pollutants treatment under practical conditions.

Creation of Cationic Polymeric Nanotrap Featuring High Anion Density and Exceptional Alkaline Stability for Highly Efficient Pertechnetate Removal from Nuclear Waste Streams.

There is an urgent need for highly efficient sorbents capable of selectively removing 99TcO4- from concentrated alkaline nuclear wastes, which has long been a significant challenge. In this study, we present the design and synthesis of a high-performance adsorbent, CPN-3 (CPN denotes cationic polymeric nanotrap), which achieves excellent 99TcO4- capture under strong alkaline conditions by incorporating branched alkyl chains on the N3 position of imidazolium units and optimizing the framework anion density within the pores of a cationic polymeric nanotrap. CPN-3 features exceptional stability in harsh alkaline and radioactive environments as well as exhibits fast kinetics, high adsorption capacity, and outstanding selectivity with full reusability and great potential for the cost-effective removal of 99TcO4-/ReO4- from contaminated water. Notably, CPN-3 marks a record-high adsorption capacity of 1052 mg/g for ReO4- after treatment with 1 M NaOH aqueous solutions for 24 h and demonstrates a rapid removal rate for 99TcO4- from simulated Hanford and Savannah River Site waste streams. The mechanisms for the superior alkaline stability and 99TcO4- capture performances of CPN-3 are investigated through combined experimental and computational studies. This work suggests an alternative perspective for designing functional materials to address nuclear waste management.

Isoreticular Contraction of Cage-like Metal-Organic Frameworks with Optimized Pore Space for Enhanced C2H2/CO2 and C2H2/C2H4 Separations.

The C2H2 separation from CO2 and C2H4 is of great importance yet highly challenging in the petrochemical industry, owing to their similar physical and chemical properties. Herein, the pore nanospace engineering of cage-like mixed-ligand MFOF-1 has been accomplished via contracting the size of the pyridine- and carboxylic acid-functionalized linkers and introducing a fluoride- and sulfate-bridging cobalt cluster, based on a reticular chemistry strategy. Compared with the prototypical MFOF-1, the constructed FJUT-1 with the same topology presents significantly improved C2H2 adsorption capacity, and selective C2H2 separation performance due to the reduced cage cavity size, functionalized pore surface, and appropriate pore volume. The introduction of fluoride- and sulfate-bridging cubane-type tetranuclear cobalt clusters bestows FJUT-1 with exceptional chemical stability under harsh conditions while providing multiple potential C2H2 binding sites, thus rendering the adequate ability for practical C2H2 separation application as confirmed by the dynamic breakthrough experiments under dry and humid conditions. Additionally, the distinct binding mechanism is suggested by theoretical calculations in which the multiple supramolecular interactions involving C-H···O, C-H···F, and other van der Waals forces play a critical role in the selective C2H2 separation.

Recent Development of Metal-Organic Frameworks for Water Purification.

Water contamination is an increasing concern to mankind because of the increasing amount of pollutants in aquatic ecosystems. To purify the polluted water, various techniques have been used to remove hazardous components. Unfortunately, traditional cleanup techniques with a low uptake capacity are unable to achieve water purification. Metal-organic frameworks (MOFs) have recently shown potential in effective water pollutant isolation in terms of selectivity and adsorption capacity over traditional porous materials. The high surface area and versatile functionality of MOFs allow for the development of new adsorbents. The development of MOFs in a range of water treatments in the recent five years will be highlighted in this review, along with assessments of the adsorption performance relevant to the particular task. Moreover, the outlook on future opportunities for water purification using MOFs is also provided.

Enhancing ion selectivity by tuning solvation abilities of covalent-organic-framework membranes.

Understanding the molecular-level mechanisms involved in transmembrane ion selectivity is essential for optimizing membrane separation performance. In this study, we reveal our observations regarding the transmembrane behavior of Li+ and Mg2+ ions as a response to the changing pore solvation abilities of the covalent-organic-framework (COF) membranes. These abilities were manipulated by adjusting the lengths of the oligoether segments attached to the pore channels. Through comparative experiments, we were able to unravel the relationships between pore solvation ability and various ion transport properties, such as partitioning, conduction, and selectivity. We also emphasize the significance of the competition between Li+ and Mg2+ with the solvating segments in modulating selectivity. We found that increasing the length of the oligoether chain facilitated ion transport; however, it was the COF membrane with oligoether chains containing two ethylene oxide units that exhibited the most pronounced discrepancy in transmembrane energy barrier between Li+ and Mg2+, resulting in the highest separation factor among all the evaluated membranes. Remarkably, under electro-driven binary-salt conditions, this specific COF membrane achieved an exceptional Li+/Mg2+ selectivity of up to 1352, making it one of the most effective membranes available for Li+/Mg2+ separation. The insights gained from this study significantly contribute to advancing our understanding of selective ion transport within confined nanospaces and provide valuable design principles for developing highly selective COF membranes.

Luminescent lanthanide complexes based on 4,5-di(3,5-dicarboxylphenoxy)phthalic acid as enhanced fluorescence probes for highly selective detection of lead(II) ions in water.

Six novel lanthanide complexes ([Nd2(L)(H2O)6]n·4.58n(H2O) (1), [Ln(H3L)(H2O)]n·0.5n(H2O), Ln = Sm (2), Eu (3), Gd (4), Tb (5), Eu0.18Gd0.62Tb0.20 (6)) have been hydrothermally synthesized based on the ligand 4,5-di(3,5-dicarboxylphenoxy)phthalic acid (H6L). Single crystal X-ray diffraction reveals that complexes 1-6 are 2D structures, where 2-6 are isomorphic. Complexes 3 and 5 exhibit the characteristic fluorescence of Eu(III) and Tb(III) ions respectively, while complex 4 shows blue-green light emission based on the ligand. In particular, the ternary Eu/Gd/Tb complex 6 shows white light emission with a CIE (Commission International del'Eclairage) chromaticity coordinate of (0.330, 0.339) and hence close to pure white light emission. Moreover, complexes 3 and 5 display specific fluorescence-enhanced detection performance for Pb2+ ions: The interaction between Pb2+ ions and the ligand enhances the charge transfer efficiency between the ligand and the Eu(III) and Tb(III) ions and thus leads to fluorescence enhancement of complexes 3 and 5. More importantly, complex 3 exhibits the lowest detection limit of 4.72 nM for Pb2+ ions among the existing complex fluorescent probes. In addition, both complexes 3 and 5 show good performance for recycling and for the detection of Pb2+ in real water samples.

Enhancing Sustainable Energy Conversion Efficiency by Incorporating Photoelectric Responsiveness into Multiporous Ionic Membrane.

The evolution of porous membranes has revitalized their potential application in sustainable osmotic-energy conversion. However, the performance of multiporous membranes deviates significantly from the linear extrapolation of single-pore membranes, primarily due to the occurrence of ion-concentration polarization (ICP). This study proposes a robust strategy to overcome this challenge by incorporating photoelectric responsiveness into permselective membranes. By introducing light-induced electric fields within the membrane, the transport of ions is accelerated, leading to a reduction in the diffusion boundary layer and effectively mitigating the detrimental effects of ICP. The developed photoelectric-responsive covalent-organic-framework membranes exhibit an impressive output power density of 69.6 W m-2 under illumination, surpassing the commercial viability threshold by ≈14-fold. This research uncovers a previously unexplored benefit of integrating optical electric conversion with reverse electrodialysis, thereby enhancing energy conversion efficiency.

Novel anionic surfactant-modified chlorhexidine and its potent antimicrobial properties.

Chlorhexidine dodecyl sulfate (CHX-DS) was synthesized and characterized via single-crystal X-ray diffraction (SC-XRD), 1H nuclear magnetic resonance (NMR) spectroscopy, 1H nuclear Overhauser effect spectroscopy (NOESY), and attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR). The solid-state structure, comprising a 1 : 2 stoichiometric ratio of chlorhexidine cations [C22H30Cl2N10]2+ to dodecyl sulfate anions [C12H25SO4]-, is the first report of chlorhexidine isolated with a surfactant. CHX-DS exhibits broad-spectrum antibacterial activity and demonstrates superior efficacy for reducing bacteria-generated volatile sulfur compounds (VSCs) as compared to chlorhexidine gluconate (CHG). The minimum inhibitory concentrations (MICs) of CHX-DS were 7.5, 2.5, 2.5, and 10 µM for S. enterica, E. coli, S. aureus, and S. mutans, respectively. Furthermore, MIC assays for E. coli and S. mutans demonstrate that CHX-DS and CHX exhibit a statistically significant efficacy enhancement in 2.5 µM treatment as compared to CHG. CHX-DS was incorporated into SBA-15, a mesoporous silica nanoparticle (MSN) framework, and its release was qualitatively measured via UV-vis in aqueous media, which suggests its potential as an advanced functional material for drug delivery applications.

Metal-Organic Framework as a New Type of Magnetothermally-Triggered On-Demand Release Carrier.

The development of external stimuli-controlled payload systems has been sought after with increasing interest toward magnetothermally-triggered drug release (MTDR) carriers due to their non-invasive features. However, current MTDR carriers present several limitations, such as poor heating efficiency caused by the aggregation of iron oxide nanoparticles (IONPs) or the presence of antiferromagnetic phases which affect their efficiency. Herein, a novel MTDR carrier is developed using a controlled encapsulation method that fully fixes and confines IONPs of various sizes within the metal-organic frameworks (MOFs). This novel carrier preserves the MOF's morphology, porosity, and IONP segregation, while enhances heating efficiency through the oxidation of antiferromagnetic phases in IONPs during encapsulation. It also features a magnetothermally-responsive nanobrush that is stimulated by an alternating magnetic field to enable on-demand drug release. The novel carrier shows improved heating, which has potential applications as contrast agents and for combined chemo and magnetic hyperthermia therapy. It holds a great promise for magneto-thermally modulated drug dosing at tumor sites, making it an exciting avenue for cancer treatment.

Adsorption of per- and polyfluoroalkyl substances (PFAS) from water with porous organic polymers.

Per- and polyfluoroalkyl substances (PFAS) are man-made environmental contaminants causing increasing global concern due to their adverse effect on environmental and human health. Conventional treatment methods are ineffective in removing short-chain PFAS because they are persistent and recalcitrant to treatment. This study evaluated the performance of a structurally-tunable and chemically-stable porous organic polymer (POP) for PFAS removal under realistic environmental conditions. The POP demonstrated an exceptionally high removal efficiency (>95%) within 15 min when the initial PFAS concentration was approximately 400 ng/L. The adsorption of PFAS on the POP was not significantly affected by changes in solution pH within the range of 5-9. The common co-contaminants in water competed with short-chain PFAS for active sites during the adsorption process following the order of natural organic matter (NOM), long-chain PFAS, and Cl-. The Freundlich-type model could predict the multicomponent interactions well with a R2 value above 0.91. The spent POP was effectively regenerated using a mixture of the 10% NaCl and 30% methanol solution and the PFAS removal maintained at 90% through five adsorption and desorption cycles. The characteristics of the designed POP make it a highly promising and stable absorbent. It enables fast and effective removal of short-chain PFAS.

Metal-Free Heterogeneous Asymmetric Hydrogenation of Olefins Promoted by Chiral Frustrated Lewis Pair Framework.

The development of metal-free and recyclable catalysts for significant yet challenging transformations of naturally abundant feedstocks has long been sought after. In this work, we contribute a general strategy of combining the rationally designed crystalline covalent organic framework (COF) with a newly developed chiral frustrated Lewis pair (CFLP) to afford chiral frustrated Lewis pair framework (CFLPF), which can efficiently promote the asymmetric olefin hydrogenation in a heterogeneous manner, outperforming the homogeneous CFLP counterpart. Notably, the metal-free CFLPF exhibits superior activity/enantioselectivity in addition to excellent stability/recyclability. A series of in situ spectroscopic studies, kinetic isotope effect measurements, and density-functional theory computational calculations were also performed to gain an insightful understanding of the superior asymmetric hydrogenation catalysis performances of CFLPF. Our work not only increases the versatility of catalysts for asymmetric catalysis but also broadens the reactivity of porous organic materials with the addition of frustrated Lewis pair (FLP) chemistry, thereby suggesting a new approach for practical and substantial transformations through the advancement of novel catalysts from both concept and design perspectives.

Pore Space Partition Synthetic Strategy in Imine-linked Multivariate Covalent Organic Frameworks.

Partitioning the pores of covalent organic frameworks (COFs) is an attractive strategy for introducing microporosity and achieving new functionality, but it is technically challenging to achieve. Herein, we report a simple strategy for partitioning the micropores/mesopores of multivariate COFs. Our approach relies on the predesign and synthesis of multicomponent COFs through imine condensation reactions with aldehyde groups anchored in the COF pores, followed by inserting additional symmetric building blocks (with C2 or C3 symmetries) as pore partition agents. This approach allowed tetragonal or hexagonal pores to be partitioned into two or three smaller micropores, respectively. The synthesized library of pore-partitioned COFs was then applied for the capture of iodine pollutants (i.e., I2 and CH3I). This rich inventory allowed deep exploration of the relationships between the COF adsorbent composition, pore architecture, and adsorption capacity for I2 and CH3I capture under wide-ranging conditions. Notably, one of our developed pore-partitioned COFs (COF 3-2P) exhibited greatly enhanced dynamic I2 and CH3I adsorption performances compared to its parent COF (COF 3) in breakthrough tests, setting a new benchmark for COF-based adsorbents. Results present an effective design strategy toward functional COFs with tunable pore environments, functions, and properties.

A general large-scale synthesis approach for crystalline porous materials.

Crystalline porous materials such as covalent organic frameworks (COFs), metal-organic frameworks (MOFs) and porous organic cages (POCs) have been widely applied in various fields with outstanding performances. However, the lack of general and effective methodology for large-scale production limits their further industrial applications. In this work, we developed a general approach comprising high pressure homogenization (HPH), which can realize large-scale synthesis of crystalline porous materials including COFs, MOFs, and POCs under benign conditions. This universal strategy, as illustrated in the proof of principle studies, has prepared 4 COFs, 4 MOFs, and 2 POCs. It can circumvent some drawbacks of existing approaches including low yield, high energy consumption, low efficiency, weak mass/thermal transfer, tedious procedures, poor reproducibility, and high cost. On the basis of this approach, an industrial homogenizer can produce 0.96 ~ 580.48 ton of high-performance COFs, MOFs, and POCs per day, which is unachievable via other methods.

Two-dimensional superhard silicon nitrides with widely tunable bandgap, high carrier mobility and hole-doping-induced robust magnetism.

The search for new forms of the traditional bulk materials to enrich their interactions and properties is an attractive subject in two-dimensional (2D) materials. In this work, novel tetra-hexa-mixed coordinated 2D silicon nitrides (Si3N4) and their analogues are systematically investigated via density functional theory. The results show the global minimum 2D structure, Si3N4 (T-aa), is a highly chemically and thermally stable superhard semiconductor with a wide indirect bandgap (about 6.0 eV), which is widely adjustable under both biaxial strain and vertical electric field. It also possesses anisotropic high carrier mobility, up to 5490 cm2 V-1 s-1 at room temperature. Besides, its nitride analogues of group IVA (Si, Ge, Sn, and Pb) exhibit diverse electronic structures with regular bandgap distribution. Remarkably, some nitride analogues display linearly increasing robust magnetism with hole doping. The theoretical Curie temperatures of Si3N4 and Sn3N4 with hole doping (1h+ per unit cell) are 298 and 180 K, respectively. The Si3N4 (T-aa) and its analogues have a variety of excellent properties to be potentially applied in various fields, e.g., semiconductor electronics, spintronics, high-temperature structural materials, and superhard materials.

Functional Carbon Capsules Supporting Ruthenium Nanoclusters for Efficient Electrocatalytic 99 TcO4 - /ReO4 - Removal from Acidic and Alkaline Nuclear Wastes.

The selective removal of the ß-emitting pertechnetate ion (99 TcO4 - ) from nuclear waste streams is technically challenging. Herein, a practical approach is proposed for the selective removal of 99 TcO4 - (or its surrogate ReO4 - ) under extreme conditions of high acidity, alkalinity, ionic strength, and radiation field. Hollow porous N-doped carbon capsules loaded with ruthenium clusters (Ru@HNCC) are first prepared, then modified with a cationic polymeric network (R) containing imidazolium-N+ units (Ru@HNCC-R) for selective 99 TcO4 - and ReO4 - binding. The Ru@HNCC-R capsules offer high binding affinities for 99 TcO4 - /ReO4 - under wide-ranging conditions. An electrochemical redox process then transforms adsorbed ReO4 - to bulk ReO3 , delivering record-high removal capacities, fast kinetics, and excellent long-term durability for removing ReO4 - (as a proxy for 99 TcO4 - ) in a 3 m HNO3 , simulated nuclear waste-Hanford melter recycle stream and an alkaline high-level waste stream (HLW) at the U.S. Savannah River Site (SRS). In situ Raman and X-ray absorption spectroscopy (XAS) analyses showed that adsorbed Re(VII) is electrocatalytically reduced on Ru sites to a Re(IV)O2 intermediate, which can then be re-oxidized to insoluble Re(VI)O3 for facile collection. This approach overcomes many of the challenges associated with the selective separation and removal of 99 TcO4 - /ReO4 - under extreme conditions, offering new vistas for nuclear waste management and environmental remediation.

Large-Scale Synthesis of Covalent Organic Frameworks: Challenges and Opportunities.

Connecting organic building blocks by covalent bonds to design porous crystalline networks has led to covalent organic frameworks (COFs), consequently transferring the flexibility of dynamic linkages from discrete architectures to extended structures. By virtue of the library of organic building blocks and the diversity of dynamic linkages and topologies, COFs have emerged as a novel field of organic materials that propose a platform for tailor-made complex structural design. Progress over the past two decades in the design, synthesis, and functional exploration of COFs in diverse applications successively established these frameworks in materials chemistry. The large-scale synthesis of COFs with uniform structures and properties is of profound importance for commercialization and industrial applications; however, this is in its infancy at present. An innovative designing and synthetic approaches have paved novel ways to address future hurdles. This review article highlights the fundamental of COFs, including designing principles, coupling reactions, topologies, structural diversity, synthetic strategies, characterization, growth mechanism, and activation aspects of COFs. Finally, the major challenges and future trends for large-scale COF fabrication are outlined.