Seasonal changes in invertebrate diet of breeding black-necked cranes (Grus nigricollis).

Invertebrates greatly support the growth, development, and reproduction of insectivorous birds. However, the influence of human activity (e.g., pesticide use, deforestation, and urbanization) inevitably leads to a decrease in global arthropods. The diversity and variation in invertebrate diet influence the food composition of birds, especially species living in rapidly changing environments, such as the Tibetan Plateau. However, little is known of the seasonal variation in invertebrate diet in response to environmental changes. Here, we characterized the invertebrate diet composition in pre- and post-breeding black-necked crane (Grus nigricollis) using fecal metabarcoding. We identified 38 invertebrate genera; the top three were Tipula (82.1% of relative abundance), Ceramica (3.0%), and unclassified_Hymenoptera (2.5%), with Tipula predominated the diet in both seasons. We also observed 20 and 16 unique genera in the pre- and post-breeding periods, and the genera composition was distinct between seasons (R = .036, p = .024). In pre-breeding, black-necked cranes tended to consume more diverse foods, and individual cranes exhibited greater heterogeneity at the genus level. At the genera and species level, pre-breeding black-necked cranes showed a wider dietary niche than post-breeding cranes. We observed season-specific features, with Tipula (common crane fly) and Stethophyma (grasshoppers) being enriched in the post-breeding period and Ceramica (moth) being more abundant in the pre-breeding period. Three Tipula species had the greatest importance in discriminating between seasonal diets. This study demonstrated a seasonal pattern of invertebrate diet in the black-necked crane, suggesting diet composition in response to resource and species availability. These results elaborate on the foraging ecology of highland birds and can inform the management of black-necked crane conservation.

Design and fabrication of acorn-like Janus molecularly imprinted materials for highly specific separation and enrichment of oxytetracycline from restaurant oily wastewater.

Molecularly imprinted polymer (MIP) is dedicated to the adsorption of target substances in the aqueous phase, but ignores the adsorption in a more complex environment (oily wastewater). In order to explore the application field of existing MIPs, acorn-like Janus particles were fabricated by photo-initiated seed swelling polymerization. A novel amphiphilic Janus-MIP was prepared with the acorn-like Janus particles as matrix, methacrylic acid, ethylene dimethacrylate and oxytetracycline (OTC) as functional monomers, crosslinking agents and template molecules via surface initiated-atom transfer radical polymerization (SI-ATRP). For comparison, the poly (glycidyl methacrylate-co-ethylene glycol dimethacrylate) (poly (GMA-co-EDMA)) microspheres were also utilized as the matrix to prepare common spherical-MIP. The adsorption capacity of Janus-MIP for OTC was 23.8 mg g-1 in oil-water system, while the adsorption capacity of spherical-MIP for OTC was only 12.6 mg g-1 in the same system. At the same time, through high performance liquid chromatography (HPLC) analysis, Janus-MIP can specifically recognize and adsorb trace OTC in restaurant oily wastewater samples, and the proposed method exhibited a lower limit of detection (LOD, 3 ng mL-1) and a higher OTC recovery rate (94.2 %-98.4 %). This work demonstrated great potential for the detection and control of OTC contamination from real samples in an oil-water mixed environment.

Adsorption and detection of praseodymium ion by ion-imprinted polymer with ultra-low sensitivity.

A novel kind of carbon dot (CD) was prepared by one-step hydrothermal microwave assisted method using L-tryptophan and L-tartaric acid as raw materials. Monodisperse poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate) microspheres were utilized as the matrix, with praseodymium (Pr) ion (Pr3+) as the template, methacrylic acid as the functional monomer, and 5-amino-8-hydroxyquinoline (5-AHQ) acts as the ligand. A composite microsphere of ion-imprinted polymer (IIP) and CD (noted CD@IIP) was prepared by surface-initiated atom transfer radical polymerization (SI-ATRP). For comparison, IIP without CD (Pr-IIP) and non-imprinted polymer (NIP) were also prepared. Through static adsorption experiments, it was  determined that the saturated adsorption amount of CD@IIP is 47.19 mg g-1, that of Pr-IIP is 54.49 mg g-1, while that of NIP is only 24.32 mg g-1. Dynamic adsorption experiments showed that the equilibrium of three kinds of materials was reached within 30 min. Particularly, CD@IIP could emit two fluorescence peaks at 325 nm and 421 nm under ultraviolet irradiation, and exhibited excellent selectivity and fluorescence quenching effect on Pr3+. The fluorescence response of Pr3+ in the range 0-400 µmol L-1 was determined by ratiometric fluorescence method, offering a two-stage model and robust linear regression coefficient. These results demonstrated that CD@IIP exhibited selective adsorption ability for Pr3+, and a sensitive, rapid and simple method for detection of Pr3+ was successfully developed.

Association between the Maternal Gut Microbiome and Macrosomia.

Fetal macrosomia is defined as a birthweight ≥4000 g and causes harm to pregnant women and fetuses. Studies reported that the maternal intestinal microbiome plays a key role in the establishment, growth, and development of the fetal intestinal microbiome. However, whether there is a relationship between maternal gut microbiota and macrosomia remains unclear. Our study aimed to identify gut microbiota that may be related to the occurrence of macrosomia, explore the possible mechanisms by which it causes macrosomia, and establish a prediction model to determine the feasibility of predicting macrosomia by early maternal gut microbiota. We conducted a nested case-control study based on an early pregnancy cohort (ChiCTR1900020652) in the Maternity and Child Health Hospital of Hunan Province on fecal samples of 93 women (31 delivered macrosomia as the case group and 62 delivered normal birth weight newborns as the control group) collected and included in this study. We performed metagenomic analysis to compare the composition and function of the gut microbiome between cases and controls. Correlation analysis was used to explore the association of differential species and differential functional pathways. A random forest model was used to construct an early pregnancy prediction model for macrosomia. At the species level, there were more Bacteroides salyersiae, Bacteroides plebeius, Ruminococcus lactaris, and Bacteroides ovatus in the intestinal microbiome of macrosomias' mothers compared with mothers bearing fetuses that had normal birth weight. Functional pathways of the gut microbiome including gondoate biosynthesis, L-histidine degradation III, cis-vaccenate biosynthesis, L-arginine biosynthesis III, tRNA processing, and mannitol cycle, which were more abundant in the macrosomia group. Significant correlations were found between species and functional pathways. Bacteroides plebeius was significantly associated with the pathway of cis-vaccenate biosynthesis (r = 0.28, p = 0.005) and gondoate biosynthesis (r = 0.28, p < 0.001) and Bacteroides ovatus was positively associated with the pathway of cis-vaccenate biosynthesis (r = 0.29, p = 0.005) and gondoate biosynthesis (r = 0.32, p = 0.002). Bacteroides salyersiae was significantly associated with the pathway of cis-vaccenate biosynthesis (r = 0.24, p = 0.018), gondoate biosynthesis (r = 0.31, p = 0.003), and L-histidine degradation III (r = 0.22, p = 0.291). Finally, four differential species and four clinical indicators were included in the random forest model for predicting macrosomia. The areas under the working characteristic curves of the training and validation sets were 0.935 (95% CI: 0.851~0.979) and 0.909 (95% CI: 0.679~0.992), respectively. Maternal gut microbiota in early pregnancy may play an important role in the development of macrosomia and can be used as potential predictors to prevent macrosomia.

Construction of adamantane-based monolithic column with three-dimensionally porous structure for small molecules separation and biosample analysis.

BACKGROUND: The fabrication technique of capillary column is the key to the development and application of capillary liquid chromatography (cLC) to improve separation efficiency for analytes. The capillary monolithic column possessed three-dimensionally connected porous or channel structures. Unique porous structure endows excellent permeability and high performance in diverse fields, especially in separation. Thereinto, organic monolithic columns have attracted widespread attention due to their advantages of simple preparation and excellent biocompatibility. However, their separation selectivity needs to be further developed and regulated to apply the separation of more diverse samples. RESULTS: A novel polymeric monolithic column was prepared via thermally initiated in situ copolymerization of 2-methyladamantan-2-yl acrylate (MADA) with ditrimethylolpropane tetraacrylate (DTTA) in fused silica. The prepared poly(MADA-co-DTTA) monolith showed adjustable permeability, developed porous structure and high thermal stability. Consequently, it exhibited excellent separation capability of small molecules (alkylbenzenes and polycyclic aromatic hydrocarbons). Especially, when acetonitrile/water (60/40, v/v) was used as the mobile phase, the theoretical plate numbers reached 84,000 plates m-1 for butylbenzene at a linear velocity of 0.5 mm s-1. Most importantly, the hydrophobicity of the poly(MADA-co-DTTA) monolithic column was regulated via host-guest interaction between adamantyl group and cucurbit [7]uril (CB[7]). Additionally, the poly(MADA-co-DTTA) monolith was further adopted for the analysis of the tryptic digest of proteins from HeLa by cLC-MS/MS. The 33,783 unique peptides and 5,299 proteins were identified on the monolith, which exhibited great separation ability for complex samples. SIGNIFICANCE AND NOVELTY: Due to abundant pore structure and good chemical properties, the poly(MADA-co-DTTA) monolithic column exhibited high performance for the separations of small molecules and biological sample. Meanwhile, owing to the existence of adamantyl-group, CB[7] was immobilized on the poly(MADA-co-DTTA) monolithic column to fabricate poly(MADA-co-DTTA)-CB[7] by host-guest interaction. It is possible to adjust the surface chemistry of the monolithic materials to accommodate more complex analytes.

Very severe oligozoospermia with AZFc microdeletion patients may affect intracytoplasmic sperm injection clinical outcomes: A propensity score matching analysis.

Purpose: To explore whether spermatozoa from AZFc microdeletion patients affect their outcomes of intracytoplasmic sperm injection (ICSI). Methods: Eighty-five patients with AZFc microdeletion were recruited. A control group of one hundred and forty patients with severe oligozoospermia but without AZF microdeletion was selected using propensity score matching analysis with a 1:2 nearest neighbor algorithm ratio. The ICSI outcomes of the two groups were compared. Results: AZFc microdeletion had lower rates of normal fertilization (73% vs. 80%, p = 0.17) and high-quality embryos (44% vs. 58%, p = 0.07) than the control group. There was no significant difference in the clinical pregnancy rate, miscarriage rate, and live birth rate between the two groups. When the sperm concentration was <1 million/mL, the AZFc microdeletion group exhibited lower rates of fertilization (71% vs. 80%, p = 0.03), high-quality embryo (44% vs. 58%, p = 0.02), clinical pregnancy (57% vs. 76%, p = 0.02), and live birth (49% vs. 72%, p = 0.01) than the control group. However, if sperm concentration was ≥1 million/mL, no significant differences were found. Conclusion: If the sperm concentration is <1 million/mL, AZFc microdeletion do have a detrimental effect on most outcomes of ICSI.

Comparison of stimulation protocols for dose determination of gonadotropins: A systematic review and Bayesian network meta-analysis based on randomized controlled trials.

BACKGROUND: To date, evidence regarding the effectiveness and safety of individualized controlled ovarian stimulation (COS) compared with standard dose COS has been inadequate. OBJECTIVES: To evaluate the updated evidence from published randomized controlled trials (RCTs) about the efficacy and safety of individualized COS with different ovarian reserve test biomarkers or clinical experience versus standard dose COS. SEARCH STRATEGY: Terms and descriptors related to COS, individualized or standard, and RCT were combined to search, and only English language studies were included. Conference abstracts and comments were excluded. SELECTION CRITERIA: RCTs with comparison between different individualized COS strategies and standard starting dose strategy were included. DATA COLLECTION AND ANALYSIS: Two reviews independently assessed the eligibility of retrieved citations in a predefined standardized manner. Relative risk (RRs) and the weighted mean difference (WMD) with 95% confidence intervals (CIs) were pooled using a random-effects model on R software version 4.2.2. MAIN RESULTS: Compared with the standard dose COS strategy in pairwise meta-analysis, the individualized COS strategy was associated with a notable lower risk of ovarian hyperstimulation syndrome (OHSS; 174/2384 [7.30%] vs 114/2412 [4.73%], RR 0.66, 95% CI: 0.47-0.93, I2 = 46%), a significantly lower risk of hyperresponse to stimulation (hyperresponse; 476/2402 [19.82%] vs 331/2437 [13.58%], RR 0.71, 95% CI: 0.57-0.90, I2 = 61%), and a slightly longer ovarian stimulation days (duration of stimulation; WMD 0.20, 95% CI: 0.01-0.40, I2 = 66%). Bayesian network meta-analysis also found that biomarker-tailored strategy had a significantly lower risk of OHSS than standard dose strategy (OHSS; RR 0.63, 95% CI: 0.41-0.97, I2 = 47.5%). CONCLUSION: Compared with standard dose COS strategy, individualized COS strategy could significantly reduce the risks of OHSS and hyperresponse to stimulation, but the duration of stimulation was slightly longer. TRIAL REGISTRATION: PROSPERO: CRD42023358439.

Inverse association of prepregnancy systolic blood pressure and live birth rate in normotensive women undergoing in vitro fertilization/intracytoplasmic sperm injection.

OBJECTIVE: To explore whether maternal baseline systolic blood pressure (SBP) and diastolic blood pressure (DBP) affect pregnancy outcomes particularly in normotensive women (SBP, 90-139 mm Hg; DBP, 60-89 mm Hg) and hypertensive women undergoing in vitro fertilization (IVF) or intracytoplasmic sperm injection (ICSI). DESIGN: Retrospective cohort study. SETTING: Maximum care hospital for reproductive medicine. PATIENT(S): This study included 73,462 patients who underwent IVF/ICSI at the Reproductive and Genetic Hospital of CITIC-Xiangya between January 1, 2016, and November 30, 2020, selected on the basis of pre-established criteria. Analysis was limited to the first transfer cycle of the first stimulation cycle. INTERVENTION: Baseline SBP and DBP. MAIN OUTCOME MEASURE(S): The primary outcome focused on the live birth rate (LBR), with the secondary outcomes including clinical pregnancy rate, ectopic pregnancy rate, first-trimester miscarriage rate, second- or third-trimester fetal loss, and delivery/neonatal/maternal outcomes. Analytic methods included Poisson regression, linear regression, linear mixed-effect model, and restricted cubic spline analysis as appropriate. RESULT(S): For normotensive women, a 10-mm Hg increase in SBP was associated with an adjusted relative risk of 0.988 (95% confidence interval, 0.981-0.995) for live birth likelihood. However, DBP was not significantly associated with LBR after adjustments. The secondary outcomes indicated that increases in SBP and DBP were associated with higher risks of first-trimester miscarriage, gestational diabetes mellitus, and gestational hypertension in the normotensive subset. Sensitivity analyses confirmed these associations between SBP/DBP and LBR, consistent with the main findings even under stricter guidelines and after adjusting for multiple confounders. Subgroup analyses showed variation in the impact of blood pressure on LBR across different demographics and conditions. Consistent with earlier studies on blood pressure and birth outcomes, we found a 10-mm Hg increase in SBP was associated with a 5.4% (adjusted relative risk per 10 mm Hg, 0.946; 95% confidence interval, 0.907-0.986) reduction in LBR in the hypertensive subgroup. CONCLUSION(S): Systolic blood pressure impacted LBR outcomes in normotensive women who underwent IVF/ICSI, which suggests the need for reconsidering blood pressure management guidelines for reproductive-age women, focusing on reproductive health in addition to cardiovascular risk.

Detection and adsorption of 2-methyl-4-chlorophenoxyacetic acid in vegetables via dual-functional molecularly imprinted polymer doping with carbon dot.

2-Methyl-4-chlorophenoxyacetic acid (MCPA) is one of the most widely used herbicides, so adsorption and detection of MCPA in the environment is critical. Blue fluorescent carbon dot (CD) was synthesized from citric acid and urea, which could be quenched by MCPA. Herein, bifunctional molecularly imprinted polymer (CD@MIP) was prepared on monodisperse poly (glycidyl methacrylate-co-ethylene glycol dimethacrylate) microspheres, with 4-vinylpyridine as the functional monomer, ethylene glycol dimethacrylate as the cross-linking agent, and doped with CD. The enrichment ability of CD@MIP for MCPA and fluorescence detection performance were determined. The maximum adsorption amount of MCPA was 93.9 mg g-1 as determined by isothermal adsorption experiments and was in accordance with the Langmuir adsorption model. The results of the kinetic experiments showed that the adsorption equilibrium reached within 30 min, which possessed a relatively fast adsorption rate and was in accordance with the pseudo-second-order adsorption model. Both MIP without CD and non-imprinted polymers were also fabricated and tested as references. Fluorescence experiments showed good linearity of CD@MIP in the range of 0-80 µmol. The cabbage samples were analyzed by high performance liquid chromatography with a linear range of 0.02-15 µg mL-1, recoveries of 90.5%-98% and low relative standard deviations (RSD, n = 3) of 1.5%-5.9%. CD@MIP with excellent performance provides a feasible practical application in the detection and enrichment of MCPA.

Selective adsorption and identification of penicillin G sodium in milk by molecularly imprinted polymer doped carbon dot.

A carbon dot (CD) was prepared by o-phenylenediamine and water, which showed bright yellow fluorescence under ultraviolet light irradiation (λ = 580 nm), and verified good fluorescence quenching effect on penicillin G sodium (Png-Na). Using methacrylic acid as a functional monomer, ethylene glycol dimethacrylate as a crosslinker, and Png-Na as a template, a kind of composite microsphere combining CD and molecularly imprinted polymer (MIP) was synthesized by surface-initiated atomic transfer radical polymerization (SI-ATRP). For reasons of comparison, we also prepared MIP without CD and non-imprinted polymers (NIPs). Through static and dynamic adsorption experiments, the maximum adsorption capacity was 47.05 mg g-1 and the equilibrium time was 30 min. High-performance liquid chromatography (HPLC) was utilized to determine the content of Png-Na in the spiked milk samples. A sensitive, rapid, and simple method for determination of Png-Na in food samples was developed. The utilized approach enabled the quantification of Png-Na within the concentration range 20-1000 µg L-1 (with a limit of detection of 5 µg L-1). The recoveries achieved were in the range 93.3-98.2%, with a relative standard deviation of 1.2-4.2%. The results demonstrated that CD@MIP possessed the capability of specific adsorption and fluorescence detection of Png-Na, enabling simultaneous detection and enrichment of Png-Na in real samples.