Development of a miniaturized 3D organoid culture platform for ultra-high-throughput screening.

The recent advent of robust methods to grow human tissues as 3D organoids allows us to recapitulate the 3D architecture of tumors in an in vitro setting and offers a new orthogonal approach for drug discovery. However, organoid culturing with extracellular matrix to support 3D architecture has been challenging for high-throughput screening (HTS)-based drug discovery due to technical difficulties. Using genetically engineered human colon organoids as a model system, here we report our effort to miniaturize such 3D organoid culture with extracellular matrix support in high-density plates to enable HTS. We first established organoid culturing in a 384-well plate format and validated its application in a cell viability HTS assay by screening a 2036-compound library. We further miniaturized the 3D organoid culturing in a 1536-well ultra-HTS format and demonstrated its robust performance for large-scale primary compound screening. Our miniaturized organoid culturing method may be adapted to other types of organoids. By leveraging the power of 3D organoid culture in a high-density plate format, we provide a physiologically relevant screening platform to model tumors to accelerate organoid-based research and drug discovery.

HTiP: High-Throughput Immunomodulator Phenotypic Screening Platform to Reveal IAP Antagonists as Anti-cancer Immune Enhancers.

Protein- and cell-based immunotherapeutic agents have revolutionized cancer treatment. However, small-molecule immunomodulators with favorable pharmacological properties for reaching intracellular targets remain to be developed. To explore the vast chemical space, a robust method that recapitulates the complex cancer-immune microenvironment in a high-throughput format is essential. To address this critical gap, we developed a high-throughput immunomodulator phenotypic screening platform, HTiP, which integrates the immune and cancer cell co-culture system with imaging- and biochemical-based multiplexed readouts. Using the HTiP platform, we have demonstrated its capability in modeling an oncogenic KRAS mutation-driven immunosuppressive phenotype. From a bioactive chemical library, multiple structurally distinct compounds were identified, all of which target the same class of proteins, inhibitor of apoptosis protein (IAP). IAP has demonstrated roles in cancer immunity. Identification of IAP antagonists as potent anti-tumor immune enhancers provides strong validating evidence for the use of the HTiP platform to discover small-molecule immunomodulators.

Quantitative relations between interaction parameter, miscibility and function in organic solar cells.

Although it is known that molecular interactions govern morphology formation and purity of mixed domains of conjugated polymer donors and small-molecule acceptors, and thus largely control the achievable performance of organic solar cells, quantifying interaction-function relations has remained elusive. Here, we first determine the temperature-dependent effective amorphous-amorphous interaction parameter, χaa(T), by mapping out the phase diagram of a model amorphous polymer:fullerene material system. We then establish a quantitative 'constant-kink-saturation' relation between χaa and the fill factor in organic solar cells that is verified in detail in a model system and delineated across numerous high- and low-performing materials systems, including fullerene and non-fullerene acceptors. Our experimental and computational data reveal that a high fill factor is obtained only when χaa is large enough to lead to strong phase separation. Our work outlines a basis for using various miscibility tests and future simulation methods that will significantly reduce or eliminate trial-and-error approaches to material synthesis and device fabrication of functional semiconducting blends and organic blends in general.

Hand-powered centrifugal microfluidic platform inspired by the spinning top for sample-to-answer diagnostics of nucleic acids.

Point-of-care (POC), sample-to-answer and electricity-free nucleic acid diagnostic tools are vital for health care and disease control in resource-limited settings where centralized medical facilities or even electric power may remain unreliable. Inspired by one of the oldest recognizable toys, the spinning top, here we report a fully hand-powered centrifugal microfluidic platform for the diagnostics of pathogenic bacteria. Assay procedures such as zeolite-based purification of nucleic acids, loop-mediated isothermal amplification (LAMP) and visual detection of fluorescence signals are integrated into a single microfluidic disc. A simple pull-out operation of the top rack of the customized centrifuge initiates high-speed rotation of the disc, resulting in efficient actuation and mixing of preloaded sample/reagent fluids. This microfluidic platform enables the simultaneous detection of six kinds of pathogenic bacteria within a small disc in an electricity-free manner, showing great promise in sample-to-answer nucleic acid detection in remote settings.

Ring-Fusion of Perylene Diimide Acceptor Enabling Efficient Nonfullerene Organic Solar Cells with a Small Voltage Loss.

We report a novel small molecule acceptor (SMA) named FTTB-PDI4 obtained via ring-fusion between the thiophene and perylene diimide (PDI) units of a PDI-tetramer with a tetrathienylbezene (TTB) core. A small voltage loss of 0.53 V and a high power conversion efficiency of 10.58% were achieved, which is the highest value reported for PDI-based devices to date. By comparing the fused and nonfused SMAs, we show that the ring-fusion introduces several beneficial effects on the properties and performances of the acceptor material, including more favorable energy levels, enhanced light absorption and stronger intermolecular packing. Interestingly, morphology data reveal that the fused molecule yields higher domain purity and thus can better maintain its molecular packing and electron mobility in the blend. Theoretical calculations also demonstrate that FTTB-PDI4 exhibits a "double-decker" geometry with two pairs of mostly parallel PDI units, which is distinctively different from reported PDI-tetramers with highly twisted geometries and can explain the better performance of the material. This work highlights the promising design of PDI-based acceptors by the ring-fusion strategy.

Design of Donor Polymers with Strong Temperature-Dependent Aggregation Property for Efficient Organic Photovoltaics.

Bulk heterojunction (BHJ) organic solar cells (OSCs) have attracted intensive research attention over the past two decades owing to their unique advantages including mechanical flexibility, light weight, large area, and low-cost fabrications. To date, OSC devices have achieved power conversion efficiencies (PCEs) exceeding 12%. Much of the progress was enabled by the development of high-performance donor polymers with favorable morphological, electronic, and optical properties. A key problem in morphology control of OSCs is the trade-off between achieving small domain size and high polymer crystallinity, which is especially important for the realization of efficient thick-film devices with high fill factors. For example, the thickness of OSC blends containing state-of-the-art PTB7 family donor polymers are restricted to ∼100 nm due to their relatively low hole mobility and impure polymer domains. To further improve the device performance and promote commercialization of OSCs, there is a strong demand for the design of new donor polymers that can achieve an optimal blend morphology containing highly crystalline yet reasonably small domains. In this Account, we highlight recent progress on a new family of conjugated polymers with strong temperature-dependent aggregation (TDA) property. These polymers are mostly disaggregated and can be easily dissolved in solution at high temperatures, yet they can strongly aggregate when the solution is cooled to room temperature. This unique aggregation property allows us to control the disorder-order transition of the polymer during solution processing. By preheating the solution to high temperature (∼100 °C), the polymer chains are mostly disaggregated before spin coating; as the temperature of the solution drops during the spin coating process, the polymer can strongly aggregate and form crystalline domains yet that are not excessivelylarge. The overall blend morphology can be optimized by various processing conditions (e.g., temperature, spin-rates, concentration, etc.). This well-controlled and near-optimal BHJ morphology produced over a dozen cases of efficient OSCs with an active layer nearly 300 nm thick that can still achieve high FFs (70-77%) and efficiencies (10-11.7%). By studying the structure-property relationships of the donor polymers, we show that the second position branched alkyl chains and the fluorination on the polymer backbone are two key structural features that enable the strong TDA property. Our comparative studies also show that the TDA polymer family can be used to match with non-fullerene acceptors yielding OSCs with low voltage losses. The key difference between the empirical matching rules for fullerene and non-fullerene OSCs is that TDA polymers with slightly reduced crystallinity appear to match better with small molecular acceptors and yield higher OSC performances.

An All-Solution Processed Recombination Layer with Mild Post-Treatment Enabling Efficient Homo-Tandem Non-fullerene Organic Solar Cells.

The first homo-tandem non-fullerene organic solar cell enabled by a novel recombination layer which only requires a very mild thermal annealing treatment is reported. The best efficiency achieved is 10.8% with a Voc over 2.1 V, which is the highest Voc for double-junction organic solar cells reported to date.

Donor polymer design enables efficient non-fullerene organic solar cells.

To achieve efficient organic solar cells, the design of suitable donor-acceptor couples is crucially important. State-of-the-art donor polymers used in fullerene cells may not perform well when they are combined with non-fullerene acceptors, thus new donor polymers need to be developed. Here we report non-fullerene organic solar cells with efficiencies up to 10.9%, enabled by a novel donor polymer that exhibits strong temperature-dependent aggregation but with intentionally reduced polymer crystallinity due to the introduction of a less symmetric monomer unit. Our comparative study shows that an analogue polymer with a C2 symmetric monomer unit yields highly crystalline polymer films but less efficient non-fullerene cells. Based on a monomer with a mirror symmetry, our best donor polymer exhibits reduced crystallinity, yet such a polymer matches better with small molecular acceptors. This study provides important insights to the design of donor polymers for non-fullerene organic solar cells.

Reduced Intramolecular Twisting Improves the Performance of 3D Molecular Acceptors in Non-Fullerene Organic Solar Cells.

A small-molecular acceptor, tetraphenylpyrazine-perylenediimide tetramer (TPPz-PDI4 ), which has a reduced extent of intramolecular twisting compared to two other small-molecular acceptors is designed. Benefiting from the lowest extent of intramolecular twisting, TPPz-PDI4 exhibits the highest aggregation tendency and electron mobility, and therefore achieves a highest power conversion efficiency of 7.1%.

A tetraphenylethylene core-based 3D structure small molecular acceptor enabling efficient non-fullerene organic solar cells.

A tetraphenylethylene core-based small molecular acceptor with a unique 3D molecular structure is developed. Bulk-heterojunction blend films with a small feature size (≈20 nm) are obtained, which lead to non-fullerene organic solar cells (OSCs) with 5.5% power conversion efficiency. The work provides a new molecular design approach to efficient non-fullerene OSCs based on 3D-structured small-molecule acceptors.