Valorization of sugarcane bagasse ash: producing glass-ceramic materials.

Some aluminosilicates, for example mullite and wollastonite, are very important in the ceramic and construction industries. The most significant glass-ceramic for building applications has wollastonite as the main crystal phase. In this work we report on the use of sugarcane bagasse ash (SCBA) to produce glass-ceramics with silicates as the major crystalline phases. The glasses (frits) were prepared by mixing ash, limestone (calcium and magnesium carbonates) and potassium carbonate as the fluxing agent. X-ray fluorescence was used to determine the chemical composition of the glasses and their crystallization was assessed by using thermal analysis (DTA/DSC/TGA) and X-ray diffraction. The results showed that glass-ceramic material can be produced with wollastonite as the major phase, at a temperature lower than 900 °C.

A model for three-dimensional simulation of acoustic emissions from rotating machine vibration.

Industrial noise can be successfully mitigated with the combined use of passive and active noise control (ANC) strategies. In a noisy area, a practical solution for noise attenuation may include both the use of baffles and ANC. When the operator is required to stay in movement in a delimited spatial area, conventional ANC is usually not able to adequately cancel the noise over the whole area. Control strategies need to be devised to achieve acceptable spatial coverage. A three-dimensional vibration-acoustic model is proposed in this paper. The signal of an accelerometer attached to the bulk of a centrifugal pump installed in an empty room was used as the input of this model. The signal of a microphone that changes its position in a spatial grid inside this room is the output. In the first stage, the ARX models are used to describe a SISO system where the input is the machine vibration and the output is the noise level measured at a certain point. In the second stage, spatial interpolation is used to estimate the model parameters. Results show good agreement between experimental data and model predictions, indicating the potential of using the model for the design of ANC.

Dietary protein during gestation affects placental development in heifers.

The influence of nutritional protein during the first and second trimesters of pregnancy on placental measures at term and caruncle numbers in the uteri of adult offspring was determined in composite beef heifers. At artificial insemination (AI), heifers were divided by weight and composite genotype into four dietary treatment groups, identified by the level of protein components fed during the first and second trimesters: high/high (HH), high/low (HL), low/high (LH), low/low (LL). Expelled placentas were collected and weighed, and cotyledons were dissected, counted, weighed, and measured. Uteri from mature female offspring were dissected at slaughter and caruncles counted. The number of cotyledons in the expelled placenta was increased by high dietary protein in the second trimester (P=0.02) and varied with genotype (P=0.03). Placental weight was influenced by maternal undernutrition during early gestation dependent on dam genotype (P=0.001). Placental efficiency, as determined by calf weight:placental weight, increased with dam age (P=0.03). Calf birth weight was closely associated with placental weight (P=0.002) and cotyledonary weight (P=0.001) and surface area (P=0.04), but not with the number of cotyledons. Leptin concentrations during early (R=-0.29) and late gestation (R=-0.25) correlated with placental weight, and Insulin-like growth factor binding proteins throughout gestation correlated with the number of cotyledons (R=-0.28 to-0.33). The number of uterine caruncles in the nonpregnant adult offspring did not correlate with the dam's genotype, nutrition treatment, or cotyledon number in the expelled placenta.

Dietary protein during gestation affects circulating indicators of placental function and fetal development in heifers.

The influences of nutritional protein during the first and second trimesters of pregnancy on placental hormones and fetal growth were determined in composite beef heifers. At artificial insemination, heifers were stratified by weight within each composite genotype into 4 treatment groups: High High (HH=1.4kg crude protein (CP)/day for first and second trimesters of gestation; n=16), High Low (HL=1.4kg CP/day for first trimester and 0.4kg CP/day for second trimester; n=19), Low High (LH=0.4kg CP/day for first trimester and 1.4kg CP/day for second trimester; n=17) or Low Low (LL=0.4kg CP/day for first and second trimesters; n=19). Maternal plasma bovine pregnancy associated glycoprotein (bPAG) and progesterone (P4) were determined at gestation day (gd) 28, 82, 179 and 271 (mean gestation length 286 days) in addition to P4 at term. Estrone sulphate (ES) and bovine placental lactogen (bPL) concentrations were measured at gd 124, 179, 236 and 271 and at term in addition to ES at gd 82. Low dietary protein increased placental function as indicated by increased bPAG (P<0.001) and ES (P=0.02) concentrations in first trimester and increased bPL concentrations (P=0.01) in the second trimester of gestation. In the third trimester, when dietary treatment had ceased, placental function was no longer associated with previous dietary treatments. Dam genotype affected placental function as measured by bPL (P<0.001) and ES concentrations (P=0.02). Calf gender, heifer age and maternal insulin-like growth factor (IGF)-I, -II and leptin did not affect hormonal indicators or circulating markers of placental function. Enhanced placental function during the third trimester, as measured by ES, was associated with increased calf birth weight (P=0.003).