RESUMO
In addition to post-extraction bleeding, pronounced alveolar bone resorption is a very common complication after tooth extraction in patients undergoing anticoagulation therapy. The novel, biodegenerative, polyurethane adhesive VIVO has shown a positive effect on soft tissue regeneration and hemostasis. However, the regenerative potential of VIVO in terms of bone regeneration has not yet been explored. The present rodent study compared the post-extraction bone healing of a collagen sponge (COSP) and VIVO in the context of ongoing anticoagulation therapy. According to a split-mouth design, a total of 178 extraction sockets were generated under rivaroxaban treatment, of which 89 extraction sockets were treated with VIVO and 89 with COSP. Post-extraction bone analysis was conducted via in vivo micro-computed tomography (µCT), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDX) after 5, 10, and 90 days. During the observation time of 90 days, µCT analysis revealed that VIVO and COSP led to significant increases in both bone volume and bone density (p ≤ 0.001). SEM images of the extraction sockets treated with either VIVO or COSP showed bone regeneration in the form of lamellar bone mass. Ratios of Ca/C and Ca/P observed via EDX indicated newly formed bone matrixes in both treatments after 90 days. There were no statistical differences between treatment with VIVO or COSP. The hemostatic agents VIVO and COSP were both able to prevent pronounced bone loss, and both demonstrated a strong positive influence on the bone regeneration of the alveolar ridge post-extraction.
Assuntos
Anticoagulantes , Regeneração Óssea , Extração Dentária , Microtomografia por Raio-X , Animais , Regeneração Óssea/efeitos dos fármacos , Extração Dentária/efeitos adversos , Ratos , Masculino , Anticoagulantes/farmacologia , Anticoagulantes/uso terapêutico , Adesivos Teciduais/farmacologia , Perda do Osso Alveolar/etiologia , Perda do Osso Alveolar/diagnóstico por imagem , Perda do Osso Alveolar/tratamento farmacológico , Colágeno/metabolismoRESUMO
Surface tension provides microbubbles (MB) with a perfect spherical shape. Here, we demonstrate that MB can be engineered to be nonspherical, endowing them with unique features for biomedical applications. Anisotropic MB were generated via one-dimensionally stretching spherical poly(butyl cyanoacrylate) MB above their glass transition temperature. Compared to their spherical counterparts, nonspherical polymeric MB displayed superior performance in multiple ways, including i) increased margination behavior in blood vessel-like flow chambers, ii) reduced macrophage uptake in vitro, iii) prolonged circulation time in vivo, and iv) enhanced blood-brain barrier (BBB) permeation in vivo upon combination with transcranial focused ultrasound (FUS). Our studies identify shape as a design parameter in the MB landscape, and they provide a rational and robust framework for further exploring the application of anisotropic MB for ultrasound-enhanced drug delivery and imaging applications.
Assuntos
Barreira Hematoencefálica , Microbolhas , Barreira Hematoencefálica/diagnóstico por imagem , Ultrassonografia , Transporte Biológico , Sistemas de Liberação de MedicamentosRESUMO
BACKGROUND: The evaluation of bone remodelling and dental root resorption can be performed by histological techniques or micro-computed tomography (micro-CT). The present study aimed to evaluate the relationship between these two procedures in the context of cleft repair in a rat model. METHODS: The reconstructed maxillae and the orthodontically-moved first molar of 12 rats were analysed for correlations between the histological and radiological findings retrospectively. The alveolar cleft repairs were performed using bone autografts or (human) xenografts. Four weeks after the operation, the intervention of the first molar protraction was initiated and lasted for eight weeks. The newly formed bone and the root resorption lacunae were determined via histology. In the micro-CT analysis, the average change of bone mineral density (BMD), bone volume fraction (BV/TV), trabecular thickness and trabecular separation of the jaw, as well as the volume of the root resorptions were determined. The Pearson correlation coefficient was applied to study the associations between groups. RESULTS: Positive correlations were found only between the newly formed bone (histology) and BMD changes (micro-CT) in the autograft group (r = 0.812, 95% CI: 0.001 to 0.979, p = 0.05). The relationship of newly formed bone and BV/TV was similar but not statistically significant (r = 0.691, 95% CI: -0.274 to 0.963, p = 0.013). Regarding root resorption, no significant correlations were found. CONCLUSIONS: Due to the lack of correlation between histological and radiological findings of bone remodelling and the development of root resorptions, both methods should be combined in this cleft model in rats for a comprehensive analysis.
Assuntos
Reabsorção da Raiz , Humanos , Ratos , Animais , Reabsorção da Raiz/diagnóstico por imagem , Microtomografia por Raio-X/métodos , Roedores , Estudos Retrospectivos , Remodelação Óssea , Densidade ÓsseaRESUMO
OBJECTIVE: The aim of the present study was to investigate the influence of three grafting materials for cleft repair on orthodontic tooth movement in rats. MATERIALS AND METHODS: Artificial alveolar clefts were created in 21 Wistar rats and were repaired 4 weeks later using autografts, human xenografts and synthetic bone substitute (beta-tricalcium phosphate/hydroxyapatite [ß-TCP/HA]). A further 4 weeks later, the first molar was moved into the reconstructed maxilla. Microfocus computed tomography (µCT) was performed six times (T0-T5) to assess the tooth movement and root resorption. After 8 weeks, the affected reconstructed jaw was resected for histopathological investigation. RESULTS: Total distances reached ranged from 0.82 ± 0.72 mm (ß-TCP/HA) to 0.67 ± 0.27 mm (autograft). The resorption was particularly determined at the mesiobuccal root. Descriptive tooth movement slowed and root resorption increased slightly. However, neither the radiological changes during tooth movement (µCT T1 vs. µCT T5: autograft 1.85 ± 0.39 mm3 vs. 2.38 ± 0.35 mm3, p = 0.30; human xenograft 1.75 ± 0.45 mm3 vs. 2.17 ± 0.26 mm3, p = 0.54; ß-TCP/HA: 1.52 ± 0.42 mm3 vs. 1.88 ± 0.41 mm3, p = 0.60) nor the histological differences after tooth movement (human xenograft: 0.078 ± 0.05 mm2; ß-TCP/HA: 0.067 ± 0.049 mm2; autograft: 0.048 ± 0.015 mm2) were statistically significant. CONCLUSION: The autografts, human xenografts or synthetic bone substitute used for cleft repair seem to have a similar effect on the subsequent orthodontic tooth movement and the associated root resorptions. CLINICAL RELEVANCE: Development of root resorptions seems to have a secondary role in choosing a suitable grafting material for cleft repair.
Assuntos
Substitutos Ósseos , Reabsorção da Raiz , Animais , Substitutos Ósseos/farmacologia , Fosfatos de Cálcio , Humanos , Ratos , Ratos Wistar , Reabsorção da Raiz/diagnóstico por imagem , Técnicas de Movimentação Dentária/métodos , Raiz Dentária/patologiaRESUMO
Automation of medical data analysis is an important topic in modern cancer diagnostics, aiming at robust and reproducible workflows. Therefore, we used a dataset of breast US images (252 malignant and 253 benign cases) to realize and compare different strategies for CAD support in lesion detection and classification. Eight different datasets (including pre-processed and spatially augmented images) were prepared, and machine learning algorithms (i.e., Viola-Jones; YOLOv3) were trained for lesion detection. The radiomics signature (RS) was derived from detection boxes and compared with RS derived from manually obtained segments. Finally, the classification model was established and evaluated concerning accuracy, sensitivity, specificity, and area under the Receiver Operating Characteristic curve. After training on a dataset including logarithmic derivatives of US images, we found that YOLOv3 obtains better results in breast lesion detection (IoU: 0.544 ± 0.081; LE: 0.171 ± 0.009) than the Viola-Jones framework (IoU: 0.399 ± 0.054; LE: 0.096 ± 0.016). Interestingly, our findings show that the classification model trained with RS derived from detection boxes and the model based on the RS derived from a gold standard manual segmentation are comparable (p-value = 0.071). Thus, deriving radiomics signatures from the detection box is a promising technique for building a breast lesion classification model, and may reduce the need for the lesion segmentation step in the future design of CAD systems.
RESUMO
To minimize the postoperative risks posed by grafting autologous transplants for cleft repair, efforts are being made to improve grafting materials for use as potential alternatives. The aim of this study was to compare the bone graft quality of different bone substitutes including the gold standard autografts during the healing processes after cleft repair in the context of orthodontic treatment. In 21 Wistar rats, a complete, continuity-interrupting cleft was created. After 4 weeks, cleft repair was performed using autografts from the hips' ischial tuberosity, human xenografts, or synthetic bone substitutes [beta-tricalcium phosphate (ß-TCP)/hydroxyapatite (HA)]. After another 4 weeks, the first molar movement was initiated in the reconstructed jaw for 8 weeks. The bone remodeling was analyzed in vivo using micro-computed tomography (bone mineral density and bone volume fraction) and histology (new bone formation). All the grafting materials were statistically different in bone morphology, which changed during the treatment period. The ß-TCP/HA substitute demonstrated less resorption compared to the autologous and xenogeneic/human bone, and the autografts led to a stronger reaction in the surrounding bone. Histologically, the highest level of new bone formation was found in the human xenografts, and the lowest was found in the ß-TCP/HA substitute. The differences between the two bone groups and the synthetic materials were statistically significant. Autografts were confirmed to be the gold standard in cleft repair with regard to graft integration. However, parts of the human xenograft seemed comparable to the autografts. Thus, this substitute could perhaps be used as an alternative after additional tissue-engineered modification.
Assuntos
Processo Alveolar/cirurgia , Substitutos Ósseos/farmacologia , Transplante Ósseo , Fissura Palatina/cirurgia , Hidroxiapatitas/farmacologia , Técnicas de Movimentação Dentária , Animais , Autoenxertos , Masculino , Ratos , Ratos WistarRESUMO
PURPOSE: Pharmacokinetic modeling can be applied to quantify the kinetics of fluorescently labeled compounds using longitudinal micro-computed tomography and fluorescence-mediated tomography (µCT-FMT). However, fluorescence blurring from neighboring organs or tissues and the vasculature within tissues impede the accuracy in the estimation of kinetic parameters. Contributions of elimination and retention activities of fluorescent probes inside the kidneys and liver can be hard to distinguish by a kinetic model. This study proposes a deconvolution approach using a mixing matrix to model fluorescence contributions to improve whole-body pharmacokinetic modeling. PROCEDURES: In the kinetic model, a mixing matrix was applied to unmix the fluorescence blurring from neighboring tissues and blood vessels and unmix the fluorescence contributions of elimination and retention in the kidney and liver compartments. Accordingly, the kinetic parameters of the hepatobiliary and renal elimination routes and five major retention sites (the kidneys, liver, bone, spleen, and lung) were investigated in simulations and in an in vivo study. In the latter, the pharmacokinetics of four fluorescently labeled compounds (indocyanine green (ICG), HITC-iodide-microbubbles (MB), Cy7-nanogels (NG), and OsteoSense 750 EX (OS)) were evaluated in BALB/c nude mice. RESULTS: In the simulations, the corrected modeling resulted in lower relative errors and stronger linear relationships (slopes close to 1) between the estimated and simulated parameters, compared to the uncorrected modeling. For the in vivo study, MB and NG showed significantly higher hepatic retention rates (P<0.05 and P<0.05, respectively), while OS had smaller renal and hepatic retention rates (P<0.01 and P<0.01, respectively). Additionally, the bone retention rate of OS was significantly higher (P<0.01). CONCLUSIONS: The mixing matrix correction improves pharmacokinetic modeling and thus enables a more accurate assessment of the biodistribution of fluorescently labeled pharmaceuticals by µCT-FMT.
Assuntos
Tomografia , Animais , Fluorescência , Camundongos , Camundongos Nus , Distribuição Tecidual , Microtomografia por Raio-X/métodosRESUMO
BACKGROUND: The aim of the present investigation was to develop a new cleft model in rats that allows alveolar cleft repair and subsequent tooth movement. METHODS: A complete continuity-interrupting alveolar cleft was performed on the left-side maxillae of 33 rats through ultrasonic surgery. The clefts were filled with bone wax, and microCT scans were done to analyze the cleft size. After four weeks, the cleft repair was completed using autologous, xenogeneic (human), or synthetic bone substitute. After an additional four weeks, the orthodontic tooth movement was initiated. RESULTS: Fourteen rats died during the research, and the study design was constantly adapted accordingly. The main reasons for death included breathing problems during or immediately after the experimental activities (eight animals), followed by two deaths due to circulatory failures. In the remaining 19 animals, the average cleft size was about 2.70 ± 0.46 × 2.01 ± 0.25 × 1.18 ± 0.20 mm, and the mean velocity of orthodontic tooth movement after seven days was between 0.21 ± 0.08 mm in the autologous group and 0.50 ± 0.54 mm in the xenogeneic group. After 56 days, the mean values ranged between 0.67 ± 0.27 mm in the autologous group and 0.82 ± 0.72 mm in the synthetic group. CONCLUSIONS: Surgical interventions in the oral cavity of rats requires a stronger anesthesia and lead to increased risk of coolant and coagulated blood aspiration. The new alveolar cleft model in rats allows for subsequent orthodontic tooth movement after cleft repair, but only in the mesial root of the first molar.
Assuntos
Fissura Palatina , Técnicas de Movimentação Dentária , Processo Alveolar/diagnóstico por imagem , Animais , Maxila , Dente Molar , RatosRESUMO
Digitalization, especially the use of machine learning and computational intelligence, is considered to dramatically shape medical procedures in the near future. In the field of cancer diagnostics, radiomics, the extraction of multiple quantitative image features and their clustered analysis, is gaining increasing attention to obtain more detailed, reproducible, and meaningful information about the disease entity, its prognosis and the ideal therapeutic option. In this context, automation of diagnostic procedures can improve the entire pipeline, which comprises patient registration, planning and performing an imaging examination at the scanner, image reconstruction, image analysis, and feeding the diagnostic information from various sources into decision support systems. With a focus on cancer diagnostics, this review article reports and discusses how computer-assistance can be integrated into diagnostic procedures and which benefits and challenges arise from it. Besides a strong view on classical imaging modalities like x-ray, CT, MRI, ultrasound, PET, SPECT and hybrid imaging devices thereof, it is outlined how imaging data can be combined with data deriving from patient anamnesis, clinical chemistry, pathology, and different omics. In this context, the article also discusses IT infrastructures that are required to realize this integration in the clinical routine. Although there are still many challenges to comprehensively implement automated and integrated data analysis in molecular cancer imaging, the authors conclude that we are entering a new era of medical diagnostics and precision medicine.
Assuntos
Automação , Análise de Dados , Processamento de Imagem Assistida por Computador/métodos , Imagem Molecular/métodos , Neoplasias/diagnóstico , Conjuntos de Dados como Assunto , Previsões , Troca de Informação em Saúde , Humanos , Processamento de Imagem Assistida por Computador/tendências , Aprendizado de Máquina , Oncologia/tendências , Imagem Molecular/tendências , Telemedicina/métodos , Telemedicina/tendênciasRESUMO
BACKGROUND: Because of bisphosphonate medication, dental implantation with a subsequent infection poses a relevant risk factor to suffer from medication-related osteonecrosis of the jaw. This rat study evaluated different implant materials under systemic bisphosphonate delivery using micro-computed tomography (µCT) images. METHODS: Fifty-four rats were randomly allocated into a control group 1, test group 2 with intravenous drug application of zoledronic acid and test group 3 with a subcutaneous application of alendronic acid. After 4 weeks of drug delivery, the first molar on each side of the upper jaw was extracted, and either a zirconia or a titanium implant was immediately inserted. Radiological examinations at four timepoints before the operation, 1 week later, 6 weeks later and after 12 weeks of follow up included µCT measurements of the in vivo peri-implant bone loss. µCT measurements of the ex vivo peri-implant bony structure after 12 weeks follow-up covered the bone mineral density, -volume, -trabecular thickness and -separation. RESULTS: Both test groups showed a significant increase in bone loss over time (P < 0.05). The clinical observations of exposed bone revealed that most cases occurred under alendronic acid delivery. Exposed bone was recorded only in the test groups around both titanium and zirconia implants. Regarding the peri-implant bony structure, no significant differences were found between both materials. CONCLUSIONS: Systemic bisphosphonate delivery led to increased peri-implant bone loss over time after immediate implant insertion. In terms of bone resorption and bone quality parameters, no implant material was superior to the other.
Assuntos
Implantes Dentários , Animais , Implantação Dentária , Implantação Dentária Endóssea/efeitos adversos , Implantes Dentários/efeitos adversos , Planejamento de Prótese Dentária , Difosfonatos/efeitos adversos , Osseointegração , Ratos , Titânio , Microtomografia por Raio-XRESUMO
In the context of cleft repair in animal research in rat models, different areas can be used for bone grafting. The aim of the present study was to present the tuberosity of the ischium as a new donor site and to evaluate its quality in relation to an artificial alveolar cleft. Four weeks after creating experimental alveolar clefts in seven Wistar rats, the repair was performed in the now twelve-week-old male animals using bone blocks grafted from the ischial tuberosity. Two days before surgery and two as well as twenty-eight days after surgery, microCT scans were performed, and the grafted bone blocks were analyzed regarding height, width, thickness, and volume. Additionally, bone mineral density (BMD) and bone volume fraction (BV/TV) were measured in the repaired cleft. The mean bone volume of the graft was about 19.77 ± 7.77mm3. Immediately after jaw reconstruction the BMD and BV/TV were about 0.54 ± 0.05 g/cm3 and 54.9 ± 5.07% for the transplant and about 1.13 ± 0.08 g/cm3 and 94.5 ± 3.70%, respectively, for the surrounding bone. Four weeks later the BMD and BV/TV were about 0.57 ± 0.13 g/cm3 and 56.60 ± 13.70% for the transplant and about 11.17 ± 0.07 g/cm3 and 97.50 ± 2.15%, respectively, for the surrounding bone. A hip fracture was found in four of the animals after surgery. The ischial tuberosity offers large bone blocks, which are sufficient for cleft repair in the rat model. However, the bone quality regarding BMD and BV/TV is less compared with the surrounding bone of the alveolar cleft, even after a period of 4 weeks, despite recognizable renovation processes.
Assuntos
Transplante Ósseo/métodos , Fissura Palatina/fisiopatologia , Fissura Palatina/cirurgia , Ísquio/fisiopatologia , Experimentação Animal , Animais , Densidade Óssea/fisiologia , Nádegas/fisiopatologia , Masculino , Ratos , Ratos Wistar , Microtomografia por Raio-X/métodosRESUMO
The gold-standard of preclinical micro-computed tomography (µCT) data processing is still manual delineation of complete organs or regions by specialists. However, this method is time-consuming, error-prone, has limited reproducibility, and therefore is not suitable for large-scale data analysis. Unfortunately, robust and accurate automated whole body segmentation algorithms are still missing. In this publication, we introduce a database containing 225 murine 3D whole body µCT scans along with manual organ segmentation of most important organs including heart, liver, lung, trachea, spleen, kidneys, stomach, intestine, bladder, thigh muscle, bone, as well as subcutaneous tumors. The database includes native and contrast-enhanced, regarding spleen and liver, µCT data. All scans along with organ segmentation are freely accessible at the online repository Figshare. We encourage researchers to reuse the provided data to evaluate and improve methods and algorithms for accurate automated organ segmentation which may reduce manual segmentation effort, increase reproducibility, and even reduce the number of required laboratory animals by reducing a source of variability and having access to a reliable reference group.
Assuntos
Bases de Dados Factuais , Camundongos/anatomia & histologia , Microtomografia por Raio-X , Animais , Processamento de Imagem Assistida por Computador , Imagem Corporal TotalRESUMO
Radiomics describes the use radiological data in a quantitative manner to establish correlations in between imaging biomarkers and clinical outcomes to improve disease diagnosis, treatment monitoring and prediction of therapy responses. In this study, we evaluated whether a radiomic analysis on contrast-enhanced ultrasound (CEUS) data allows to automatically differentiate three xenograft mouse tumour models. Next to conventional imaging biomarker classes, i.e. intensity-based, textural, and wavelet-based features, we included biomarkers describing morphological and functional characteristics of the tumour vasculature. In total, 235 imaging biomarkers were extracted and evaluated. Dedicated feature selection allowed us to identify user-independent and stable imaging biomarkers for each imaging biomarker class. The selected radiomic signature, composed of median image intensity, energy of grey-level co-occurrence matrix, vessel network length, and run length nonuniformity of the grey-level run length matrix from the diagonal details, was used to train a linear support vector machine (SVM) to classify tumour phenotypes. The model was trained by using a four-fold cross-validation scheme and achieved 82.1% (95% CI [0.64 0.92]) correct classifications. In conclusion, our results show that a radiomic analysis can be successfully performed on CEUS data and may help to render ultrasound-based tumour imaging more accurate, reproducible and reliable.