Controlling the critical parameters of ultrasonication to affect the dispersion state, isolation, and chiral nematic assembly of cellulose nanocrystals.

Cellulose nanocrystals (CNCs) are typically extracted from plants and present a range of opto-mechanical properties that warrant their use for the fabrication of sustainable materials. While their commercialization is ongoing, their sustainable extraction at large scale is still being optimized. Ultrasonication is a well-established and routinely used technology for (re-) dispersing and/or isolating plant-based CNCs without the need for additional reagents or chemical processes. Several critical ultrasonication parameters, such as time, amplitude, and energy input, play dominant roles in reducing the particle size and altering the morphology of CNCs. Interestingly, this technology can be coupled with other methods to generate moderate and high yields of CNCs. Besides, the ultrasonics treatment also has a significant impact on the dispersion state and the surface chemistry of CNCs. Accordingly, their ability to self-assemble into liquid crystals and subsequent superstructures can, for example, imbue materials with finely tuned structural colors. This article gives an overview of the primary functions arising from the ultrasonication parameters for stabilizing CNCs, producing CNCs in combination with other promising methods, and highlighting examples where the design of photonic materials using nanocrystal-based celluloses is substantially impacted.

Influence of kepok banana bunch as new cellulose source on thermal, mechanical, and biodegradability properties of Thai cassava starch/polyvinyl alcohol hybrid-based bioplastic.

Bioplastics were developed to overcome environmental problems that are difficult to decompose in the environment. This study analyzes Thai cassava starch-based bioplastics' tensile strength, biodegradability, moisture absorption, and thermal stability. This study used Thai cassava starch and polyvinyl alcohol (PVA) as matrices, whereas Kepok banana bunch cellulose was employed as a filler. The ratios between starch and cellulose are 10:0 (S1), 9:1 (S2), 8:2 (S3), 7:3 (S4), and 6:4 (S5), while PVA was set constant. The tensile test showed the S4 sample's highest tensile strength of 6.26 MPa, a strain of 3.85%, and a modulus of elasticity of 166 MPa. After 15 days, the maximum soil degradation rate in the S1 sample was 27.9%. The lowest moisture absorption was found in the S5 sample at 8.43%. The highest thermal stability was observed in S4 (316.8°C). This result was significant in reducing the production of plastic waste for environmental remediation.

Isolation and characterization of cellulose nanofibers from Agave gigantea by chemical-mechanical treatment.

Nanocellulose is a renewable and biocompatible nanomaterial that evokes much interest because of its versatility in various applications. This study reports the production of nanocellulose from Agave gigantea (AG) fiber using the chemical-ultrafine grinding treatment. Chemical treatment (alkalization and bleaching) removed non-cellulose components (hemicellulose and lignin), while ultrafine grinding reduced the size of cellulose microfibrils into nanocellulose. From the observation of Transmission Electron Microscopy, the average diameter of nanocellulose was 4.07 nm. The effect of chemical-ultrafine grinding on the morphology and properties of AG fiber was identified using chemical composition, Scanning Electron Microscopy, X-ray Diffraction, Fourier Transform Infrared, and Thermogravimetric Analysis. The bleaching treatment increased the crystal index by 48.3% compared to raw AG fiber, along with an increase in the cellulose content of 20.4%. The ultrafine grinding process caused a decrease in the crystal content of the AG fiber. The crystal index affected the thermal stability of the AG fiber. The TGA results showed that AG fiber treated with bleaching showed the highest thermal stability compared to AG fiber without treatment. The FTIR analysis showed that the presence of CH vibrations from the ether in the fiber. After chemical treatment, the peaks at 1605 and 1243 cm-1 disappeared, indicating the loss of lignin and hemicellulose functional groups in AG fiber. As a result, nanocellulose derived from AG fiber can be applied as reinforcement in environmentally friendly polymer biocomposites.

Effect of heat treatment on thermal resistance, transparency and antimicrobial activity of sonicated ginger cellulose film.

Transparent film with high thermal resistance and antimicrobial properties has many applications in the food packaging industry particularly packaging for reheatable food. This work investigates the effects of heat treatment on the thermal resistance, stability of transparency and antimicrobial activity of transparent cellulose film. The film from ginger nanocellulose fibers was prepared with chemicals and ultrasonication. The dried film was heated at 150 °C for 30, 60, 90, or 120 min. The unheated and sonicated film had the lowest crystallinity index and the lowest thermal properties. After heating, the film became brownish-yellow resulting from thermal oxidation. The reheated film had higher thermal resistance than unheated film. Heating led to further relaxation of cellulose network evidenced by shifting of the XRD peak positions toward lower values. The antimicrobial activity decreased due to heating. Average opacity value increases after short heating durations. It was relatively stable for further heating.

Characterization of disintegrated bacterial cellulose nanofibers/PVA bionanocomposites prepared via ultrasonication.

With the increasing demand for simple, efficient, environmentally friendly preparation methods to produce cellulose nanofibers for reinforcing a biodegradable film is increased, the role of nanofibers from the pure cellulose produced by bacteria becomes more important. This work characterized bacterial cellulose nanofibers disintegrated using a high shear homogenizer. These nanofibers, in 2.5, 5, and 7.5 mL suspensions, were mixed with PVA gel using ultrasonication. The resulting dried bionanocomposite film was also characterized. Adding nanofiber significantly increases (p ≤ 0.05) on tensile strength, thermal resistance, water vapor impermeability, and moisture resistance of PVA film but not strain at break. Tensile strength, tensile modulus, and elongation at the break of the 7.5 mL nanofiber reinforced film were 37.9 MPa (increased by 38%), 547.8 MPa (increased by 26%), and 10.7% (decreased from 17.2% for pure PVA), respectively compared to pure PVA. Transparency decreases slightly with increased nanofiber content. These properties indicate that this bionanocomposite film has potential in food packaging applications.