Fracture Resistance of Zirconia Surveyed Crowns With Digitally Designed and Hand-Modified Occlusal Rest Seats.

Background In light of the trend of using zirconia crowns, clinicians will likely face abutment included in removable partial dentures (RPD) designs with existing zirconia. However, the decision to replace the existing crown with a surveyed crown or modify the existing crown to accept the RPD is unclear. To the best of our knowledge, there is a lack of literature on the effect of preparing a rest seat on the existing monolithic zirconia crown in the patient's mouth on the fracture resistance of the crown. Therefore, in this study, we aimed to evaluate the fracture resistance of computer-aided design/computer-aided manufacturing (CAD/CAM) zirconia surveyed crowns with digitally designed rest seats and hand-modified rest seats. Methods Thirty CAD/CAM zirconia surveyed crowns were digitally designed and fabricated and divided into groups (n=10 per group) as follows: Group 1 comprised surveyed crowns with no occlusal rest seat; Group 2 comprised surveyed crowns with a digitally designed mesial rest seat; and Group 3 comprised surveyed crowns with a hand-modified mesial rest seat. Then, with all the crowns cemented to metal dies, the specimens were subjected to a fracture resistance test using a universal testing machine (Model 8501 Instron, Norwood, MA, USA). Results Surveyed crowns without any rest seat and those with digitally created and hand-modified rest seats displayed different fracture resistances: crowns with no rest seat offered the highest fracture resistance (5831 ± 895.15 N), followed by those with a digitally designed and milled rest seat (5280 ± 1673.33 N). Crowns with a hand-modified rest seat provided the lowest fracture resistance (4976 ± 322.5 N). Based on our results, surveyed crowns without a rest seat displayed higher fracture resistance than those with a rest seat. Conclusion The fracture resistance of crowns with a digitally designed and milled rest seat was statistically similar to that of control crowns with no rest seat, whereas hand-modified rest seats significantly reduced the fracture resistance of surveyed zirconia crowns.

Storage of evidence and delayed reporting after sexual assault: Rates and impact factors on subsequent reporting.

BACKGROUND: Sexual assault (SA) is alarmingly prevalent, yet reporting rates remain disproportionately low. Forensic examinations (FE) play a crucial role in both immediate medical care and evidence collection, yet many victims/survivors may not report the crime initially, leading to the loss of vital forensic evidence. The storage of evidence "Option 3″ care alternative provides post-SA care including FE without initial police involvement. METHODS: This is a cross-sectional study analysing the attendances of people who chose to store evidence at the Dublin Sexual assault Treatment Unit (SATU) between January 1, 2017 and December 31, 2023. RESULTS: There were 238 storage of evidence FEs ('Option 3') performed during the study period, which represented 12.8 % of all FEs. The majority identified as female (89.1 %), with an average age of 26.6 years. 31.9 % attended within 24 h of the incident, and 51.3 % self-referred. Most assaults occurred over weekends (64.7 %), with alcohol consumption reported in 82.2 % of cases and drug-facilitated SA concerns in 20.2 %. Genital injuries were present in 17.9 % of females and 19 % of males. Those that availed of storage of evidence (compared with those who initially reported to the police) were significantly more likely to have consumed alcohol (p < 0.001) and the assault was more likely to have occurred indoors (p = 0.002). There was no significant difference in care option choice for those 'unsure' of the assault occurrence (p = 0.353). Among storage of evidence cases, 20.2 % subsequently reported to the police, with females more likely to report (p = 0.02), while people who were uncertain whether an assault had occurred were less likely to report (p = 0.04). Genital injury (p = 0.822), victim-assailant relationship (p = 0.465), assault location (p = 0.487), and substance consumption (p = 0.332) did not significantly affect subsequent reporting rates. CONCLUSIONS: The availability of storage of evidence has afforded people the opportunity to access prompt, responsive SATU care including collection of forensic evidence which may have significant evidential value. This approach provides further opportunity for comprehensive detection of a crime, even if reporting to the police is delayed.

Effect of Dentin Contamination with Hemostatic Agents and Cleaning Techniques on Bonding with Self-Adhesive Resin Cement.

BACKGROUND Dentin contamination with hemostatic agents before bonding indirect restorations negatively affects the bond strength. However, the consensus on which materials could be used to clean contamination of hemostatic agents has not been explored. The aim of this study was to assess the effect of Katana Cleaner applied on the surface of dentin contaminated with hemostatic agents on the shear bond strength (SBS) of self-adhesive resin cement by comparing it with three other surface cleaners. MATERIAL AND METHODS Ninety dentin specimens were divided into a no contamination group (control) (n=10), 4 groups contaminated with 25% aluminum chloride (Viscostat Clear) (n=40), and 4 groups contaminated with 20% ferric sulfate (Viscostat) (n=40). Subsequently, 4 different cleaners were used for each contamination group (water rinse, phosphoric acid, chlorhexidine, and Katana Cleaner). Then, self-adhesive resin cement was directly bonded to the treated surfaces. All specimens were subjected to 5000 thermal cycles of artificial aging. The shear bond strength was measured using a universal testing machine. RESULTS Two-way analysis of variance showed that the contaminant type as the main factor was statistically non-significant (p=0.655), cleaner type as the main factor was highly significant (p<0.001), and interaction between the contaminant and cleaner was non-significant (p=0.51). The cleaner type was the main factor influencing the bond strength. Phosphoric acid and chlorhexidine showed better performance than Katana Cleaner. CONCLUSIONS Cleaning dentin surface contamination with phosphoric acid and chlorhexidine had better performance than with Katana Cleaner.

Phosphodiesterase type 5 inhibitors as treatment for erectile dysfunction: a webinar-based poll unveiling perceptions of healthcare professionals.

Aim: Erectile dysfunction (ED) is marked by a recurring incapacity to achieve or uphold a satisfactory erection during sexual activities. The study aims to increase awareness about male reproductive health, dispel misconceptions about ED and encourage physician-patient discussions. Materials & methods: A live online poll was conducted during a 3-day webinar titled "Turning the Tide of Men's Health" organized by Viatris™ in collaboration with the Saudi Society of Family and Community Medicine and attended by healthcare professionals (HCPs) from diverse specialties. The attendees voluntarily responded to nine poll questions on adherence to ED medication, use of phosphodiesterase type 5 inhibitors (PDE5is) as cure versus management of ED and patients' challenges. The responses to the poll questions were recorded and assessed to understand the perceptions of HCPs. Results: The poll garnered 10,423 responses from 5831 attendees on the second day of the webinar. The key findings included HCPs' perceptions that PDE5is contribute to ED management not complete cure. The respondents acknowledged that adherence to ED medications might decline on days without planned sexual activity, and long-term adherence on a daily PDE5i is exhibited by a relatively modest percentage of ED patients. The consensus among respondents was that PDE5is do not enhance or generate sexual desire, and the daily schedule of ED treatment may be burdensome for some patients. Conclusion: The findings from this poll offer insights into the perspectives of HCPs regarding the usage of PDE5is to treat ED. Responders of the poll generally agreed that PDE5is can help manage ED without affecting desire, though adherence may be lower on days without planned sexual activity. Furthermore, most respondents acknowledged that adhering to a daily pill regimen posed a greater burden than waiting for the medication to take effect.

Construction of an aerolysin-based multi-epitope vaccine against Aeromonas hydrophila: an in silico machine learning and artificial intelligence-supported approach.

Aeromonas hydrophila, a gram-negative coccobacillus bacterium, can cause various infections in humans, including septic arthritis, diarrhea (traveler's diarrhea), gastroenteritis, skin and wound infections, meningitis, fulminating septicemia, enterocolitis, peritonitis, and endocarditis. It frequently occurs in aquatic environments and readily contacts humans, leading to high infection rates. This bacterium has exhibited resistance to numerous commercial antibiotics, and no vaccine has yet been developed. Aiming to combat the alarmingly high infection rate, this study utilizes in silico techniques to design a multi-epitope vaccine (MEV) candidate against this bacterium based on its aerolysin toxin, which is the most toxic and highly conserved virulence factor among the Aeromonas species. After retrieval, aerolysin was processed for B-cell and T-cell epitope mapping. Once filtered for toxicity, antigenicity, allergenicity, and solubility, the chosen epitopes were combined with an adjuvant and specific linkers to create a vaccine construct. These linkers and the adjuvant enhance the MEV's ability to elicit robust immune responses. Analyses of the predicted and improved vaccine structure revealed that 75.5%, 19.8%, and 1.3% of its amino acids occupy the most favored, additional allowed, and generously allowed regions, respectively, while its ERRAT score reached nearly 70%. Docking simulations showed the MEV exhibiting the highest interaction and binding energies (-1,023.4 kcal/mol, -923.2 kcal/mol, and -988.3 kcal/mol) with TLR-4, MHC-I, and MHC-II receptors. Further molecular dynamics simulations demonstrated the docked complexes' remarkable stability and maximum interactions, i.e., uniform RMSD, fluctuated RMSF, and lowest binding net energy. In silico models also predict the vaccine will stimulate a variety of immunological pathways following administration. These analyses suggest the vaccine's efficacy in inducing robust immune responses against A. hydrophila. With high solubility and no predicted allergic responses or toxicity, it appears safe for administration in both healthy and A. hydrophila-infected individuals.

A hierarchical approach towards identification of novel inhibitors against L, D-transpeptidase YcbB as an anti-bacterial therapeutic target.

The bacterial cell wall, being a vital component for cell viability, is regarded as a promising drug target. The L, D-Transpeptidase YcbB enzyme has been implicated for a significant role in cell wall polymers cross linking during typhoid toxin release, ß-lactam resistance and outer membrane defect rescue. These observations have been recorded in different bacterial pathogens such as Salmonella Typhimurium, Citrobacter rodentium, and Salmonella typhi. In this work, we have shown structure based virtual screening of diverse natural and synthetic drug libraries against the enzyme and revealed three compounds as LAS_32135590, LAS_34036730 and LAS-51380924. These compounds showed highly stable energies and the findings are very competitive with the control molecule ((1RG or (4 R,5S)-3-({(3S,5S)-5-[(3-carboxyphenyl)carbamoyl]pyrrolidin-3-yl}sulfanyl)-5-[(1S,2R)-1-formyl-2-hydroxypropyl]-4-methyl-4,5-dihydro-1H-pyrrole-2-carboxylic acid or ertapenem)) used. Compared to control (which has binding energy score of -11.63 kcal/mol), the compounds showed better binding energy. The binding energy score of LAS_32135590, LAS_34036730 and LAS-51380924 is -12.63 kcal/mol, -12.22 kcal/mol and -12.10 kcal/mol, respectively. Further, the docked snapshot of the lead compounds and control were investigated for stability under time dependent dynamics environment. All the three leads complex and control system showed significant equilibrium (mean RMSD < 3 Å) both in term of intermolecular docked conformation and binding interactions network. Further validation on the complex's stability was acquired from the end-state MMPB/GBSA analysis that observed greater contribution from van der Waals forces and electrostatic energy while less contribution was noticed from solvation part. The compounds were also showed good drug-likeness and are non-toxic and non-mutagenic. In short, the compounds can be used in experimental testing's and might be subjected to structure modification to get better results.Communicated by Ramaswamy H. Sarma.

In silico assessment of a natural small molecule as an inhibitor of programmed death ligand 1 for cancer immunotherapy: a computational approach.

Programmed cell death ligand 1 (PD-L1) is a crucial target for cancer therapy. Here, an in silico study investigates PD-L1 to inhibit its interaction with PD1, thereby promoting an immune response to eliminate cancer cells. The study employed machine learning (ML) -based QSAR to detect PDL1 inhibitors. Morgan's fingerprint with docking score showed a 0.83 correlation with the experimental IC50, enabling the screening of 3200 natural compounds. The top three compounds, considered 2819, 2821 and 3188, were selected from the ML-based QSAR and subjected to molecular docking and simulation. The binding scores for 2819, 2821 and 3188 were -7.0, -9.0 and -8.9 kcal/mol, respectively. The stability of the ligands during a 100 ns simulation was assessed using RMSD, showing that 2819 and 2821 maintained stable patterns comparable to the control inhibitor. Notably, 2819 exhibited a consistent stable pattern throughout the simulation, while 2821 showed stability in the last 40 ns. The control compound showed the highest number of hydrogen bonds with proteins, whereas compounds 2819 and 2821 formed continuous H-bonds. 3188 was separated from the protein in later phases and is not regarded as a potential PD-L1-binding molecule. MMGBSA binding free energy for complexes was computed. Control had the lowest binding free energy, while 2819 and 2821 also had lower binding energies. In contrast, 3188 showed poor binding free energy, causing protein separation. Principal component analysis showed a loss of entropy and reduced protein conformational variation. Overall, 2819 and 2821 are potential binders for PD-L1 inhibition and immune response triggering.Communicated by Ramaswamy H. Sarma.

Flexural strength, flexural modulus and microhardness of milled vs. fused deposition modeling printed Zirconia; effect of conventional vs. speed sintering.

BACKGROUND: Various methods can be used for creating zirconia dental restorations, including 3-dimensional (3D) printing and computer-aided design/ computer-aided manufacturing (CAD/CAM) milling. The fused deposition modeling (FDM) printing method for zirconia presents numerous advantages, albeit research on the mechanical properties of these materials and resultant restorations remains scarce. Such developments are undeniably intriguing and warrant further investigation. The objective of the present study was to evaluate the impact of the sintering firing cycle (Conventional vs. Speed sintering) on the flexural strength, flexural modulus, and Vickers Microhardness of milled vs. FDM printed zirconia. METHODS: A total of 60 bars (2 × 5 × 27 mm) were fabricated for flexural strength testing, along with 40 discs (12 × 1.5 mm) for Vickers microhardness testing. Half of the specimens underwent conventional sintering, while the other half underwent a speed sintering cycle. The flexural strength and modulus were determined by a three-point bending test in a universal testing machine. The microhardness of the specimens was evaluated using a Vickers microhardness tester. Statistical analysis was performed using a two-way ANOVA test with a post-hoc Tukey test (p < 0.05). RESULTS: CAD/CAM milled zirconia had significantly higher flexural strength and modulus than FDM-printed zirconia. The sintering process did not significantly affect the flexural strength or modulus of milled or FDM-printed zirconia. The milled speed sintering group had significantly higher values in the Vickers microhardness test compared to the other groups. CONCLUSIONS: The mechanical properties of FDM-printed zirconia specimens were not found to be comparable to those of milled zirconia. Speed sintering cycle may produce milled zirconia restorations with similar flexural strength and modulus to conventional sintering, and even higher Vickers Microhardness values.

Structural and Dynamical Basis of VP35-RBD Inhibition by Marine Fungi Compounds to Combat Marburg Virus Infection.

The Marburg virus (MBV), a deadly pathogen, poses a serious threat to world health due to the lack of effective treatments, calling for an immediate search for targeted and efficient treatments. In this study, we focused on compounds originating from marine fungi in order to identify possible inhibitory compounds against the Marburg virus (MBV) VP35-RNA binding domain (VP35-RBD) using a computational approach. We started with a virtual screening procedure using the Lipinski filter as a guide. Based on their docking scores, 42 potential candidates were found. Four of these compounds-CMNPD17596, CMNPD22144, CMNPD25994, and CMNPD17598-as well as myricetin, the control compound, were chosen for re-docking analysis. Re-docking revealed that these particular compounds had a higher affinity for MBV VP35-RBD in comparison to the control. Analyzing the chemical interactions revealed unique binding properties for every compound, identified by a range of Pi-cation interactions and hydrogen bond types. We were able to learn more about the dynamic behaviors and stability of the protein-ligand complexes through a 200-nanosecond molecular dynamics simulation, as demonstrated by the compounds' consistent RMSD and RMSF values. The multidimensional nature of the data was clarified by the application of principal component analysis, which suggested stable conformations in the complexes with little modification. Further insight into the energy profiles and stability states of these complexes was also obtained by an examination of the free energy landscape. Our findings underscore the effectiveness of computational strategies in identifying and analyzing potential inhibitors for MBV VP35-RBD, offering promising paths for further experimental investigations and possible therapeutic development against the MBV.

Childhood Obesity May Be Linked to Feeding Habits and Screen Time.

Background Childhood obesity is an alarming health problem. Early feeding habits and factors are among the etiological factors contributing to obesity. Objectives The objective of this study is to evaluate the correlation between breastfeeding, alongside other relevant factors, and their potential role as preventative measures against obesity. Methods A cross-sectional hospital-based study was conducted on children who attended a pediatric clinic. Demographic, clinical, and anthropometric measurements were taken from the hospital records. A questionnaire was completed by parents telephonically. Overweight was identified as a body mass index (BMI) of > 85-95% and obesity as a BMI of > 95%. Results A total of 101 children, with a mean age of 8.88 ± 4.01 (range one to 18) years, were involved, of whom 58.4% were boys. A high BMI (overweight or obese) was found in 30 (29.7%) children. The highest BMIs were among soft drink consumers [two children (66.7%) consumed daily and eight children (40%) consumed monthly], high birth weight in two children (40%), cow's milk formula feeding in eight children (38%), and weekly fast food consumption in 18 children (35%), none of these were statistically significant. Nevertheless, there was a significant association between mean electronic device usage and high (204.5 ± 164.76 hours) and normal BMI (147.61 ± 110.24 hours) (p-value < 0.05). Conclusion This small cross-sectional study shows that almost one-third of the included children were overweight or obese, which is comparable to what has been published in the literature. Moreover, there was a potential link between some factors and obesity, especially screen time, which may contribute to the controversial literature.