Biowaste home composting: experimental process monitoring and quality control.

Because home composting is a prevention option in managing biowaste at local levels, the objective of the present study was to contribute to the knowledge of the process evolution and compost quality that can be expected and obtained, respectively, in this decentralized option. In this study, organized as the research portion of a provincial project on home composting in the territory of Pesaro-Urbino (Central Italy), four experimental composters were first initiated and temporally monitored. Second, two small sub-sets of selected provincial composters (directly operated by households involved in the project) underwent quality control on their compost products at two different temporal steps. The monitored experimental composters showed overall decreasing profiles versus composting time for moisture, organic carbon, and C/N, as well as overall increasing profiles for electrical conductivity and total nitrogen, which represented qualitative indications of progress in the process. Comparative evaluations of the monitored experimental composters also suggested some interactions in home composting, i.e., high C/N ratios limiting organic matter decomposition rates and final humification levels; high moisture contents restricting the internal temperature regime; nearly horizontal phosphorus and potassium evolutions contributing to limit the rates of increase in electrical conductivity; and prolonged biowaste additions contributing to limit the rate of decrease in moisture. The measures of parametric data variability in the two sub-sets of controlled provincial composters showed decreased variability in moisture, organic carbon, and C/N from the seventh to fifteenth month of home composting, as well as increased variability in electrical conductivity, total nitrogen, and humification rate, which could be considered compatible with the respective nature of decreasing and increasing parameters during composting. The modeled parametric kinetics in the monitored experimental composters, along with the evaluation of the parametric central tendencies in the sub-sets of controlled provincial composters, all indicate that 12-15 months is a suitable duration for the appropriate development of home composting in final and simultaneous compliance with typical reference limits.

Furniture wood wastes: experimental property characterisation and burning tests.

Referring to the industrial wood waste category (as dominant in the provincial district of Pesaro-Urbino, Marche Region, Italy), this paper deals with the experimental characterisation and the carrying out of non-controlled burning tests (at lab- and pilot-scale) for selected "raw" and primarily "engineered" ("composite") wood wastes. The property characterisation has primarily revealed the following aspects: potential influence on moisture content of local weather conditions at outdoor wood waste storage sites; generally, higher ash contents in "engineered" wood wastes as compared with "raw" wood wastes; and relatively high energy content values of "engineered" wood wastes (ranging on the whole from 3675 to 5105 kcal kg(-1) for HHV, and from 3304 to 4634 kcal kg(-1) for LHV). The smoke qualitative analysis of non-controlled lab-scale burning tests has primarily revealed: the presence of specific organic compounds indicative of incomplete wood combustion; the presence exclusively in "engineered" wood burning tests of pyrroles and amines, as well as the additional presence (as compared with "raw" wood burning) of further phenolic and containing nitrogen compounds; and the potential environmental impact of incomplete industrial wood burning on the photochemical smog phenomenon. Finally, non-controlled pilot-scale burning tests have primarily given the following findings: emission presence of carbon monoxide indicative of incomplete wood combustion; higher nitrogen oxide emission values detected in "engineered" wood burning tests as compared with "raw" wood burning test; and considerable generation of the respirable PM(1) fraction during incomplete industrial wood burning.

Partitioning of metals between the aqueous phase and suspended insoluble material in fog droplets.

This paper discusses the partitioning of metals (K, Na, Ca, Mg, Al, Cu, Fe, Pb and Zn) between the aqueous phase and the suspended insoluble material in fog samples collected in the Po Valley during two extensive fields campaigns. Metals represent on average 11% of the mass of suspended insoluble matter, while the main component is carbon (both organic carbon, OC = 35%, and black carbon, BC = 8%). The unaccounted suspended matter mass is very high, on average 46%, and is attributable to non metallic species, such as O and N and of Si. The principal metals in the insoluble suspended fraction are Fe and Al (2-5%), while the contributions of other metals (Na, Mg, Cu, Pb and Zn) are lower than 1%. Ca and K exhibited high blank values and could not be detected above blank detection limit threshold. The main components in the aqueous phase are NO3- (34%), WSOC (23%), SO4(2-) (18%) and NH4+ (19%), while trace metals and remaining cations and anions accounted for less than 1% of solute mass. The main dissolved trace metals in fog droplets are Zn, Al and Fe, while the main metallic cations are Na and Ca. Fe and Al are the only metals preferentially distributed in the suspended insoluble matter of fog droplets (partitioning ratio respectively 37% and 33%). All other metals are mostly dissolved in the aqueous phase (mean partitioning ratios of Mg, Pb, Zn, Cu and Na are 69%, 70%, 77%, 81% and 87%). These findings are in agreement with literature data on metal speciation in cloud and rain samples. The dependence of partitioning ratios on pH is investigated for the different metals, with only Al showing a clear partitioning ratio decrease with increasing pH. Conversely, the other metals show no dependence or a complex and highly variable behaviour. The partitioning ratio of iron (mean 37%) observed in the Po Valley fog samples is much higher than the water extractable iron in aerosol particles (typically 1-2 %): this fact can be explained by differences in the aerosol sources and composition among sites and by chemical processes in the aqueous phase, such as complexation and redox reactions involving organic ligands (oxalate, or other organic acids as humic-like organic matter) which may promote Fe solubility.

Gas chromatographic--mass spectrometric determination of phenylacetic acid in human blood.

Phenyl acetic acid, a metabolite of 2-phenyl ethylamine, acts as a neuromodulator in the nigrostriatal dopaminergic pathway stimulating the release of dopamine. The evaluation of phenyl acetic acid concentration in the biological fluid reflects phenyl ethylamine levels thus allowing the assessment of the modulatory role of this endogenous substance. Changes in biological fluids levels of 2-phenylethylamine and/or in its metabolite have been reported in affective disorders, such as depression and schizophrenia. Recently, the occurrence of the "attention deficit hyperactivity syndrome" has been frequently reported in childhood population and involvement of dopaminergic dysfunction in this disease has been suspected. A fast, reliable and reproducible method for the determination of phenyl acetic acid in human blood, is therefore needed in order to have a screening tool for monitoring both healthy childhood population and suspected "attention deficit hyperactivity syndrome" patients. The gas chromatographic-mass spectrometric method here described makes use of a deuterated internal standard in order to overcome problems related to the lack of reproducibility often encountered when a derivatization step is performed.

Fate of enrofloxacin in swine sewage.

The fate of enrofloxacin present in raw sewage at a swine-breeding facility was investigated by liquid-liquid extraction and reversed-phase liquid chromatography with photodiode array detection. Samples were collected in the storage pits of each pigsty and in a nonaerated lagoon used to stock the sewage. In the pigsties, the sewage was mixed with 10% olive oil groundwater, following a certified procedure (cod. Cer 020301) which reduces the bad odors and produces a better manure. This sewage treatment for 8 months in the lagoon dramatically reduced the amount of enrofloxacin to levels under the detection limit of 0.6 microg.L(-)(1). The results stress the importance of correct sludge management in limiting the impact of enrofloxacin in the environment.

Identification of levoglucosan and related steroisomers in fog water as a biomass combustion tracer by ESI-MS/MS.

A conspicuous fraction of the water soluble organic compounds (WSOC) in fog and fine aerosol samples is composed by monosaccharide anhydrides, such as levoglucosan and its stereoisomers, galactosan and mannosan. Levoglucosan is produced exclusively during wood combustion processes, making it a very useful tracer for plant combustion emissions in the atmosphere. This paper describes a new experimental approach, based on electrospray-tandem mass spectrometry (ESI-MS/MS), for the identification of levoglucosan in fog water samples. The analytical method proposed allows to identify the specific sugar anhydrides directly in the liquid phase without the need of any derivatization process.

Comparison of solid-phase extraction and micro-solid-phase extraction for liquid chromatography/mass spectrometry analysis of pesticides in water samples.

Our recent on-line solid-phase extraction (SPE) device for micro-liquid chromatography, known as micro-solid-phase extraction (microSPE), was compared with traditional SPE for the analysis, from aqueous samples, of 4 pesticides belonging to different classes. Two different kinds of adsorbents, C18 and graphitized carbon black, were tested. A 2-stage ion trap mass spectrometer, equipped with homemade microflow electrospray ion (ESI) source, was used. Detection limits with a signal-to-noise ratio of 3:1 for both extraction methods were in the range of 0.1 microg/L for all compounds. However, better recoveries were obtained when microSPE traps were used.

The weathering of natural and artificial stones in the baroque church of S. Pietro in Valle (Fano-Italy).

The church of San Pietro in Valle in Fano is with good reason considered one of the outstanding examples of baroque art in Central Italy. Currently the church is in a serious degradation status. For this reason, and in order to devise a correct conservative restoration project, a scientific study has been carried out, aimed at characterizing mortars used for the application of marble decorations and the different degradation products occurring in the church (i.e. pulverizations, encrustations, salt efflorescences, and condensation water). In the following, results obtained analyzing the different sample typologies by optical microscopy, X-ray diffraction, electron scanning microscopy with energy-dispersion micro-analytical system, ion chromatography, and head-space solid phase microextraction-gas chromatography-mass spectrometry will be reported.

Variable-gradient generator for micro- and nano-HPLC.

A new, simple device generates accurate nano- and microflow rate gradients from any conventional HPLC system. The core of the new device is represented by an electric-actuated, computer-controlled, multiposition HPLC valve. The valve hosts six reservoirs for as many different mobile-phase compositions of increasing strength. A low flow rate stream pushes the weakest solvent through the column as long as required and at the desired flow rate, until the chromatographic run is started. From this time on, the electric actuation allows one to select which reservoir will be on-line with the column and for how long, thus generating a specific solvent gradient, through a sequence of controlled segments of precise mobile-phase composition. This permits one not only to exactly reproduce the programmed slope but also to achieve different gradient shapes (i.e., linear, convex, concave) for different separation needs. The new device has proven to be reliable and reproducible even at the lowest flow rate tested (250 nL x min(-1)) and in different chromatographic conditions.

New liquid chromatography/electron ionization mass spectrometry methods in water analysis.

A method to extract and analyze organic compounds from water is presented. A solid phase micro-trap (micro-SPE) directly connected to the micro-analytical column is used. Sensibility and specificity needed for trace analysis are guaranteed by mass spectrometric electron ionization (EI) detection. A new micro-HPLC/EI-MS interface called Capillary-EI (Cap-EI) is described. The ultimate evolution of this interface is also presented: in this extremely simplified interface the analytes are nebulized, vaporized and ionized in the small volume of the ion source. This interface, called Direct-EI, exploits nano- and micro-HPLC columns with a mobile phase flow rates ranging from 0.3 to 1.5 microL/min. Contemporary use of micro SPE, Cap-EI or Direct-EI gives us a powerful technique to identify and quantify organic pollutants at part per billion level (ppb).

Trace level determination of organophosphorus pesticides in water with the new direct-electron ionization LC/MS interface.

A new LC/MS method for the determination of organophosphorus pesticides in water, based on the use of direct-electron ionization (EI) interface, is presented. Direct-EI is a new device that, in a very simple fashion, couples a nano-HPLC system with a mass spectrometer equipped with electron ionization capability. The nanoscale liquid flow allows for a direct introduction of eluate into the ion source and, after nebulization, for its ionization under typical EI conditions. Library-matchable EI spectra are generated for a choice of full scan or SIM detection of the analytes. In our case, a selection of organophosphorus pesticides, commonly distributed in local sugar beet cultivation, were considered. The new interface permits a very sensitive detection of the analytes in a wide range of linear response (0.09-9 ng). When applied to a real sample, the method allowed detecting four different pesticides at a concentration level of approximately 3 ng x L(-1).

Measurements of chlorofluorocarbons and their replacement compounds at Monte Cimone: results obtained after eighteen months of observations.

Chlorofluorocarbons and their substitutes are anthropogenic compounds strongly involved in global change phenomena. Therefore, their atmospheric mixing-ratios are monitored on a worldwide scale. In order to evaluate source strength of these compounds in Southern Europe, in 1999 a research activity, monitoring these compounds in the atmosphere of the Monte Cimone (MO, Italy) was started. Air samples, collected on a weekly base, were analyzed using a GC-MS methodology recently devised by our group. The reported results, obtained after eighteen months of observation, are relative to four fully halogenated halocarbons and four hydrogenated halocarbons.

Characterization of the surface interacting ability of carbon black by means of electron paramagnetic resonance analysis of adsorbed Cu2+, supported by surface analysis and atomic absorption.

Electron paramagnetic resonance (EPR) has been used to investigate the adsorption capability and the surface interacting ability towards Cu(II) solutions (CuCl2, Cu(NO3)2, CuSO4 in water or ethanol) of various carbon blacks, both graphitized and ungraphitized, selected on the basis of the surface area, namely, Carbograph1 (area = 100 m2/g), Carbograph4 (area = 210 m2/g), and Carbograph5 (area = 560 m2/g), which were indicated as C1g, C4g, C5g (g = graphitized), and C1ng, C4ng, C5ng (ng = ungraphitized). The EPR analysis was supported by surface analysis, for evaluating the surface area, the pore volume and the porosity, and by atomic absorption to obtain the adsorbed Cu(II) amounts. Graphitization provokes a decrease in surface area, but C1g, at low surface area, showed a unexpected increase of the adsorption ability ascribed to the formation of new surface porosity closed by graphite layers. The carbon samples showed a broad unresolved EPR signal due to mobile unpaired electrons in the carbon matrix. Graphitized samples presented a narrower signal than ungraphitized samples, which increases in width with the increase in surface area (with the exception of C5ng due to the high exposition of the wide surface to oxydizing external agents) and upon prolonged thermal treatment. The signal intensity of the carbon paramagnetic centers decreases upon Cu(II) adsorption. Computer aided analysis of the EPR spectra of the solids after Cu(II) adsorption allowed to extract structural information on the Cu-surface site complexes. The Cu2+ ions coordinated with surface polar sites, mainly oxygenated. Adsorption depends on the different Cu(II) salts, caused by the salt solubility and the interacting ability of the counter-ion. In several cases the solutions concentrated in the carbon porosity leading to precipitation of the salt. Ethanol solutions are more adsorbed at the carbon surface than water solutions; Cu(II) partially retains its solvation shell and partially presents electron transfer to the carbon surface. Adsorption is favored to ungraphitized carbons with respect to the graphitized ones due to both the higher surface area, and the higher hydrophilicity of the surface. In summary, these carbon powders, widely used for chromatographic applications, show an adsorption capability towards Cu(II) solutions higher than expected due to both a definite porosity, and the presence of polar groups which are not eliminated with chemical surface treatments.

A simple approach for coupling liquid chromatography and electron ionization mass spectrometry.

A miniaturized, aerosol based interface for directly coupling a liquid chromatograph with a mass spectrometer is presented. The interface is entirely within the electron ionization (EI) source of the mass spectrometer and no additional, external devices are needed. This simple and effective approach exploits micro-flow nebulization technology providing a new interface suitable for a variety of applications of environmental and biological interest. The new interface provides necessary linearity, ruggedness, sensitivity, and reproducibility of response for trace level analysis, and readily interpretable mass spectra for unambiguous identification of unknown compounds of small to medium molecular weight.