Exploring MOF-Derived CuO/rGO Heterostructures for Highly Efficient Room Temperature CO2 Sensors.

In response to the urgent need for advanced climate change mitigation tools, this study introduces an innovative CO2 gas sensor based on p-p-type heterostructures designed for effective operation at room temperature. This sensor represents a significant step forward, utilizing the synergistic effects of p-p heterojunctions to enhance the effective interfacial area, thereby improving sensitivity. The incorporation of CuO nanoparticles and rGO sheets also optimizes gas transport channels, enhancing the sensor's performance. Our CuO/rGO heterostructures, with 5 wt % rGO, have shown a notable maximum response of 39.6-500 ppm of CO2 at 25 °C, and a low detection limit of 2 ppm, indicating their potential as high-performance, room-temperature CO2 sensors. The prepared sensor demonstrates long-term stability, maintaining 98% of its initial performance over a 30-day period when tested at 1-day intervals. Additionally, the sensor remains stable under conditions of over 40% relative humidity. Furthermore, a first-principles study provides insights into the interaction mechanisms with CO2 molecules, enhancing our understanding of the sensor's operation. This research contributes to the development of CO2 monitoring solutions, offering a practical and cost-effective approach to environmental monitoring in the context of global climate change efforts.

Bio-Based PLA/PBS/PBAT Ternary Blends with Added Nanohydroxyapatite: A Thermal, Physical, and Mechanical Study.

The physical and mechanical properties of novel bio-based polymer blends of polylactic acid (PLA), poly(butylene succinate) (PBS), and poly (butylene adipate-co-terephthalate) (PBAT) with various added amounts of nanohydroxyapatite (nHA) were investigated in this study. The formulations of PLA/PBS/PBAT/nHA blends were divided into two series, A and B, containing 70 or 80 wt% PLA, respectively. Samples of four specimens per series were prepared using a twin-screw extruder, and different amounts of nHA were added to meet the regeneration needs of bone graft materials. FTIR and XRD analyses were employed to identify the presence of each polymer and nHA in the various blends. The crystallization behavior of these blends was examined using DSC. Tensile and impact strength tests were performed on all samples to screen feasible formulations of polymer blends for bone graft material applications. Surface morphology analyses were conducted using SEM, and the dispersion of nHA particles in the blends was further tested using TEM. The added nHA also served as a nucleating agent aimed at improving the crystallinity and mechanical properties of the blends. Through the above analyses, the physical and mechanical properties of the polymer blends are reported and the most promising bone graft material formulations are suggested. All blends were tested for thermal degradation analysis using TGA and thermal stability was confirmed. The water absorption experiments carried out in this study showed that the addition of nHA could improve the hydrophilicity of the blends.

Bio-based poly(hexamethylene 2,5-furandicarboxylate-co-2,6-naphthalate) copolyesters: a study of thermal, mechanical, and gas-barrier properties.

A series of poly(hexamethylene 2,5-furandicarboxylate-co-2,6-naphthalate) copolyesters were synthesized using various amounts of poly(hexylene 2,5-furandicarboxylate) (PHF) and poly(hexylene 2,6-naphthalate) (PHN) via melt polymerization. The effects of introducing 2,6-naphthalene dicarboxylic acid (NDCA) on the thermal, mechanical, and gas-barrier properties were investigated. When the NDCA content was less than 30 mol%, the temperatures of crystallization (Tc) and melting (Tm) decreased as the amount of NDCA was increased owing to disturbance of the polymer-chain regularity. When the NDCA content was above 50 mol%, the Tc and Tm of the materials increased as the NDCA content was increased, showing that the dominant crystallization behavior varied from 2,5-furandicarboxylic acid to NDCA. Hence, the glass transition temperature (Tg) increased as the NDCA content was increased, which was attributed to the incorporation of NDCA with a more rigid naphthalate structure compared with the furan ring. The gas-barrier properties of the samples were observed to improve with the introduction of NDCA; this tendency could be explained by the ß-relaxation behavior and free volume values of the samples in the amorphous state. The activation energy (Ea) of ß-relaxation increased with the NDCA content, indicating that higher amounts of energy were needed to trigger the onset of long-range molecular motions. Free-volume calculations of the polymer structure showed that the introduction of NDCA hindered the space for gas penetration. For these reasons, the gas-barrier properties were improved and evaluated.

A Rapid Thermal Absorption Rate and High Latent Heat Enthalpy Phase Change Fiber Derived from Bio-Based Low Melting Point Copolyesters.

A series of poly(butylene adipate-co-hexamethylene adipate) (PBHA) copolymers with different content of 1,4-cyclohexanedimethanol (CHDM) was synthesized via one-step melt polymerization. The PBHA copolymer with 5 mol% CHDM (PBHA-C5) exhibited a low melting point (Tm) and high enthalpy of fusion (∆Hm) of 35.7 °C and 43.9 J g-1, respectively, making it a potential candidate for an ambient temperature adjustment textile phase change material (PCM). Polybutylene terephthalate (PBT) was selected as the matrix and blended at different weight ratios of PBHA-C5, and the blended samples showed comparable Tm and ∆Hm after three cycles of cooling and reheating, indicating good maintenance of their phase changing ability. Samples were then processed via melt spinning with a take-up speed of 200 m min-1 at draw ratios (DR) of 1.0 to 3.0 at 50 °C. The fiber's mechanical strength could be enhanced to 2.35 g den-1 by increasing the DR and lowering the PBHA-C5 content. Infrared thermography showed that a significant difference of more than 5 °C between PBT and other samples was achieved within 1 min of heating, indicating the ability of PBHA-C5 to adjust the temperature. After heating for 30 min, the temperatures of neat PBT, blended samples with 27, 30, and 33 wt% PBHA-C5, and neat PBHA-C5 were 53.8, 50.2, 48.3, 47.2, and 46.5 °C, respectively, and reached an equilibrium state, confirming the temperature adjustment ability of PBHA-C5 and suggesting that it can be utilized in thermoregulating applications.

Synthesis of Bio-Based Poly(Butylene Adipate-co-Butylene Itaconate) Copolyesters with Pentaerythritol: A Thermal, Mechanical, Rheological, and Molecular Dynamics Simulation Study.

Bio-based unsaturated poly(butylene adipate-co-butylene itaconate) (PBABI) aliphatic copolyesters were synthesized with pentaerythritol (PE) as a modifier, observing the melting point, crystallization, and glass transition temperatures were decreased from 59.5 to 19.5 °C and 28.2 to -9.1 °C as an increase of itaconate concentration, and Tg ranged from -54.6 to -48.1 °C. PBABI copolyesters tend to the amorphous state by the existence of the BI unit above 40 mol%. The yield strength, elongation, and Young's modulus at different BA/BI ratios were valued in a range of 13.2-13.8 MPa, 575.2-838.5%, and 65.1-83.8 MPa, respectively. Shear-thinning behavior was obtained in all BA/BI ratios of PBABI copolyesters around an angular frequency range of 20-30 rad s-1. Furthermore, the thermal and mechanical properties of PBABI copolyesters can be well regulated via controlling the itaconic acid contents and adding the modifier. PBABI copolyesters can be coated on a 3D air mesh polyester fabric to reinforce the mechanical property for replacing traditional plaster applications.

Synthesis and Nonisothermal Crystallization Kinetics of Poly(Butylene Terephthalate-co-Tetramethylene Ether Glycol) Copolyesters.

Poly(butylene terephthalate-co-tetramethylene ether glycol) (PBT-co-PTMEG) copolymers with PTMEG ranging from 0 to 40 wt% were synthesized through melt polymerization. The structure and composition were supported by Fourier-transform infrared spectroscopy (FT-IR) and nuclear magnetic resonance spectroscopy (1H NMR). All samples had excellent thermal stability at a Td-5% around 370 °C. Crystallization temperature (Tc) and enthalpy of crystallization (ΔHc) were detected by differential scanning calorimetry (DSC), revealing a decrement from 182.3 to 135.1 °C and 47.0 to 22.1 J g-1, respectively, with the increase in PTMEG concentration from 0 to 40 wt%. Moreover, nonisothermal crystallization was carried out to explore the crystallization behavior of copolymers; the crystallization rate of PBT reduced gradually when PTMEG content increased. Hence, a decrement in the spherulite growth rate was detected in polarizing light microscope (PLM) observation, observing that the PTMEG could enhance the hindrance in the molecular chain to lower the crystallinity of PBT-co-PTMEG copolyester. Moreover, thermal properties and the crystallization rate of PBT-co-PTMEG copolymers can be amended via the regulation of PTMEG contents.