RESUMO
Magnetic-clay (MtMag) and magnetic-organoclay (O100MtMag) nanocomposites were synthesized, characterized and evaluated for arsenic adsorption. Batch arsenic adsorption experiments were performed varying pH conditions and initial As(V) concentration, while successive adsorption cycles were made in order to evaluate the materials reuse. The highest As(V) removal efficiency (9 ± 1 mg g-1 and 7.8 ± 0.8 mg g-1 for MtMag and O100MtMag, respectively) was found at pH 4.0, decreasing at neutral and alkaline conditions. From As(V) adsorption isotherm, two adsorption processes or two different surface sites were distinguished. Nanocomposites resulted composed by montmorillonite or organo-montmorillonite and magnetite as the principal iron oxide, with saturation magnetization of 8.5 ± 0.5 Am2 Kg-1 (MtMag) and 20.3 ± 0.5 Am2 Kg-1 (O100MtMag). Thus, both materials could be separated and recovered from aqueous solutions using external magnetic fields. Both materials allowed achieving arsenic concentrations lower than the World Health Organization (WHO) recommended concentration limit after two consecutive adsorption cycles (2.25 and 4.5 µg L-1 for MtMag and O100MtMag, respectively).
Assuntos
Poluentes Químicos da Água , Purificação da Água , Adsorção , Arseniatos , Bentonita , Concentração de Íons de Hidrogênio , Cinética , Fenômenos Magnéticos , Poluentes Químicos da Água/análiseRESUMO
The picloram (PCM) adsorption on nontronite, illite and kaolinite was studied at pH 3, 5 and 7. The adsorption isotherms had well-fitted to Langmuir and Freundlich models equations. The interactions of PCM with the clay mineral surfaces exhibited an anionic profile adsorption, with a decrease in adsorption when the pH increases. The PCM adsorption capacity increases in the following order: kaolinite < illite < nontronite. The X-ray diffraction (XRD) analysis of PCM-clay samples revealed that the picloram molecule does not enter into the clays basal space. The interaction of PCM with clays surface sites through nitrogen of the pyridine ring was confirmed by X-ray photoelectron spectroscopy (XPS). Due to the anionic form of PCM, the adsorption onto the external and edges surface sites of the clay minerals was proposed.
Assuntos
Argila/química , Caulim/química , Minerais/química , Picloram/isolamento & purificação , Adsorção , Herbicidas/química , Herbicidas/isolamento & purificação , Concentração de Íons de Hidrogênio , Espectroscopia Fotoeletrônica , Picloram/química , Difração de Raios XRESUMO
Slow-release formulations of the herbicide picloram (PCM, 4-amino-3,5,6-trichloropyridine-2-carboxylic acid) were designed based on its adsorption on pillared clays (pillared clays (PILCs)) for reducing the water-polluting risk derived from its use in conventional formulations. Fe-Al PILCs were synthesized by the reaction of Na+-montmorillonite (SWy-2) with base-hydrolyzed solutions of Fe and Al. The Fe/(Fe + Al) ratios used were 0.15 and 0.50. The PCM adsorption isotherms on Fe-Al PILCs were well fitted to Langmuir and Freundlich models. The PCM adsorption capacity depended on the Fe content in the PILCs. Slow-release formulations were prepared by enhanced adsorption of the herbicide from PCM-cyclodextrin (CD) complexes in solution. CDs were able to enhance up to 2.5-fold the solubility of PCM by the formation of inclusion complexes where the ring moiety of the herbicide was partially trapped within the CD cavity. Competitive adsorption of anions such as sulfate, phosphate, and chloride as well as the FTIR analysis of PCM-PILC complexes provided evidence of formation of inner sphere complexes of PCM-CD on Fe-Al PILCs. Release of the herbicide in a sandy soil was lower from Fe-Al PILC formulations relative to a PCM commercial formulation.
Assuntos
Bentonita , Picloram , Adsorção , Silicatos de Alumínio , Argila , HerbicidasRESUMO
The bioactivity of an implant is displayed on its ability to induce heterogeneous nucleation of biogenic apatite onto its surface upon immersion in body fluids; forming, through this layer, a stable bond with the host tissue. The present article evaluates the bioactivity of different nanostructured substrates based on synthetic hydroxyapatite (HA) and titania (TiO2) nanoparticles, where we extend the debate regarding the selective roles played by the presence of albumin on the biogenic apatite coating evolution. The substrates bone-bonding potential was evaluated by keeping the materials in contact with Simulated Body Fluid, while the influence of the presence of Bovine Serum Albumin in bioactivity was analyzed by a spectrophotometric technique. Our results show that materials' surface reactivity and their interfacial hydration are responsible for the bonding-site alteration and surface charge density distribution, which in turn, regulate the protein adsorption process. As a matter of fact, variations on the protein adsorbed density have a directly proportional impact on calcium binding sites, which should be responsible for the initiation of the mineralization process, disturbing the deposition of the interfacial calcium phosphate (Ca-P) mineralized coating.
Assuntos
Osso e Ossos/química , Durapatita/química , Nanopartículas/química , Soroalbumina Bovina/química , Adsorção , Líquidos Corporais/química , Calcificação Fisiológica , Fosfatos de Cálcio/química , Humanos , Propriedades de Superfície , Titânio/química , Água/químicaRESUMO
HYPOTHESIS: The environmental mobility and bioavailability of Picloram (PCM) are determined by the amine and carboxylate chemical groups interaction with the soils mineral phases. Clay particles, such as montmorillonite (Mt), and the pH value of the media could play an important role in adsorption processes. Thus, the study of the role of soil components other than organic matter deserves further investigation for a more accurate assessment of the risk of groundwater contamination. EXPERIMENTS: Samples with PCM adsorbed on Mt dispersions were prepared at pH 3-9. Subsequently, the dispersions were separated, washed, centrifuged and stored at room temperature. Picloram (PCM) herbicide interaction with surface groups of montmorillonite (Mt) was studied using XRD, DTA, FTIR and XPS techniques. FINDINGS: The entrance of PCM into the Mt basal space, in two different arrangements, perpendicular and planar, is proposed and the final arrangement depends on PCM concentration. The interaction of PCM with Mt surface sites through the nitrogen of the pyridine ring and carboxylic group of PCM, forming bidentate and bridge inner-sphere complexes was confirmed by FTIR and XPS analysis. The acidity constant of the PCM adsorbed on the Mt surface was calculated.
Assuntos
Bentonita/química , Herbicidas/química , Picloram/química , Adsorção , Silicatos de Alumínio/química , Argila , Espectroscopia Fotoeletrônica , Solo/química , Espectroscopia de Infravermelho com Transformada de Fourier , Propriedades de Superfície , Difração de Raios XRESUMO
Controlling aligned fiber micro-architectures to simulate the extracellular matrix for inducing important biological functions is a key challenge with regard to successful tissue regeneration. Here we present a bottom-up microemulsion-mediated strategy to obtain highly bioactive and biocompatible, striped Ce-TiO2 nano-crystalline superstructures with ONOO- scavenging activity. The employment of a bulkier organic ceria precursor in the material synthesis has several concurrent effects: (I) influencing the interfacial microemulsion droplet elasticity to create an aligned distribution of prismatic anatase nanoparticles causing the final lined morphology, (II) stabilizing the anatase active phase in a fine dispersed state and improving its resistance to the thermal anatase-rutile conversion, (III) indirectly favoring the rapid formation on the material surface of a hydroxyapatite layer composed of sphere-like globules of 3-5 µm in diameter essential for bone-bonding, and finally (IV) accelerating the ONOO- degradation into less harmful species NO2 - and O2.
RESUMO
The binding of Pb(II) to humic acids is studied through an approach combining equilibrium and spectroscopic measurements. The methods employed are potentiometric and fluorometric titrations, fluorescence excitation-emission matrices (EEM) and IR spectroscopy. Potentiometric titration curves are analyzed using the NICA equations and an electrostatic model treating the humic particles as an elastic polyelectrolyte network. EEMs are analyzed using parallel factor analysis, decomposing the signal in its independent components and finding their dependence on Pb(II) activity. Potentiometric results are consistent with bimodal affinity distributions for Pb(II) binding, whereas fluorometric titrations are explained by monomodal distributions. EEM analysis is consistent with three independent components in the humic fluorescence response, which are assigned to moieties with different degree of aromaticity. All three components show a similar quenching behavior upon Pb(II) binding, saturating at relatively low Pb(II) concentrations. This is attributed to metal ion induced aggregation of humic molecules, resulting in the interaction between the aromatic groups responsible for fluorescence; this is also consistent with IR spectroscopy results. The observed behavior is interpreted considering that initial metal binding (observed as strongly binding sites), correspond to bi- or multidentate complexation to carboxylate groups, including binding between groups of different humic molecules, promoting aggregation; further metal ions (observed as weakly binding sites) bind to single ligand groups.