Long-term health conditions among household families in Aotearoa New Zealand: cross-sectional analysis of integrated Census and administrative data.

AIM: Little is known about the extent to which families in Aotearoa New Zealand are affected by long-term health conditions (HCs). This study aimed to explore the rates of nine selected HCs among New Zealand family members within the same household. METHOD: Linked population and administrative health data were obtained for families living in the same household according to the 2013 New Zealand Census (N=1,043,172). Health data (2008-2013) were used to ascertain whether people in these families (N=3,137,517) received treatment or services for nine selected HCs: cancer, chronic obstructive pulmonary disease, heart disease, diabetes, dementia, gout, stroke, traumatic brain injury (TBI), or mental health/behaviour conditions (MHBCs). RESULTS: Over 60% of families included at least one person with a HC, and this rate was higher among multi-generation families (73.9%). The most common HCs were MHBCs (39.4% of families), diabetes (16.0%) and TBI (13.9%). At the highest level of socio-economic deprivation, 57.6% of children aged under 18 years lived with a family member who had a HC. CONCLUSION: Three in five New Zealand household families included someone with at least one of nine selected HCs, with differences in the proportion affected according to family composition, socio-economic status and an individual's ethnicity. This suggests that there are a substantial number of people at risk of the poor outcomes associated with the experience of HCs within their family.

Autocatalysis in Eschenmoser Coupling Reactions.

The Eschenmoser coupling reaction (ECR) of thioamides with electrophiles is believed to proceed via thiirane intermediates. However, little is known about converting the intermediates into ECR products. Previous mechanistic studies involved external thiophiles to remove the sulfur atom from the intermediates. In this work, an ECR proceeding without any thiophilic agent or base is studied by electrospray ionization-mass spectrometry. ESI-MS enables the detection of the so-far elusive polysulfide species Sn , with n ranging from 2 to 16 sulfur atoms, proposed to be the key species leading to product formation. Integrating observations from ion mobility spectrometry, ion spectroscopy, and reaction monitoring via flow chemistry coupled with mass spectrometry provides a comprehensive understanding of the reaction mechanism and uncovers the autocatalytic nature of the ECR reaction.

Proximity of alcohol outlets and presentation to hospital by young people after self-harm: A retrospective geospatial study using the integrated data infrastructure.

OBJECTIVES: There is a well-established association between alcohol use, misuse, intoxication and self-harm, the latter of which is associated with suicide. This study aimed to better understand the association between proximity to alcohol outlets and the likelihood of young people presenting to hospital following self-harm. METHODS: This was a nationwide retrospective geospatial study using data from the New Zealand Integrated Data Infrastructure using population-level data for 10-29-year-olds for the 2018 and 2017 calendar years. Presentations to hospital following self-harm were identified using the national minimum data set. Proximity to alcohol outlets was defined in road network distance (in kilometres) and ascertained using Integrated Data Infrastructure geospatial data. Alternative measures of proximity were employed in sensitivity analyses. Complete-case two-level random intercept logistic regression models were used to estimate the relationship between alcohol outlet proximity and hospital presentation for self-harm. Adjusted models included sex, age, ethnicity, area-level deprivation, urbanicity and distance to nearest medical facility. Analyses were also stratified by urbanicity. RESULTS: Of the 1,285,368 individuals (mean [standard deviation] age 20.0 [5.9] years), 7944 (0.6%) were admitted to hospital for self-harm. Overall, the odds of presenting to hospital for self-harm significantly decreased as the distance from the nearest alcohol outlet increased, including in adjusted models (adjusted odds ratio 0.980; 95% confidence interval = [0.969-0.992]); the association was robust to changes in the measure of alcohol proximity. The effect direction was consistent across all categorisations of urbanicity, but only statistically significant in large urban areas and rural areas. CONCLUSIONS: The findings of this study show a clear association between young people's access to alcohol outlets and presentation to hospital for self-harm and may provide a mandate for government policies and universal interventions to reduce young people's access to alcohol outlets. Further research regarding causative mechanisms is needed.

Thermal neutron detection and track recognition method in reference and out-of-field radiotherapy FLASH electron fields using Timepix3 detectors.

Objective.This work presents a method for enhanced detection, imaging, and measurement of the thermal neutron flux.Approach. Measurements were performed in a water tank, while the detector is positioned out-of-field of a 20 MeV ultra-high pulse dose rate electron beam. A semiconductor pixel detector Timepix3 with a silicon sensor partially covered by a6LiF neutron converter was used to measure the flux, spatial, and time characteristics of the neutron field. To provide absolute measurements of thermal neutron flux, the detection efficiency calibration of the detectors was performed in a reference thermal neutron field. Neutron signals are recognized and discriminated against other particles such as gamma rays and x-rays. This is achieved by the resolving power of the pixel detector using machine learning algorithms and high-resolution pattern recognition analysis of the high-energy tracks created by thermal neutron interactions in the converter.Main results. The resulting thermal neutrons equivalent dose was obtained using conversion factor (2.13(10) pSv·cm2) from thermal neutron fluence to thermal neutron equivalent dose obtained by Monte Carlo simulations. The calibrated detectors were used to characterize scattered radiation created by electron beams. The results at 12.0 cm depth in the beam axis inside of the water for a delivered dose per pulse of 1.85 Gy (pulse length of 2.4µs) at the reference depth, showed a contribution of flux of 4.07(8) × 103particles·cm-2·s-1and equivalent dose of 1.73(3) nSv per pulse, which is lower by ∼9 orders of magnitude than the delivered dose.Significance. The presented methodology for in-water measurements and identification of characteristic thermal neutrons tracks serves for the selective quantification of equivalent dose made by thermal neutrons in out-of-field particle therapy.

Switchable cyclopalladation of substrates containing two directing groups: on the way to non-symmetrical [2.2]-dipalladaparacyclophanes.

Simple switching of the site-selectivity of C-H activation reactions of substrates containing multiple directing groups is particularly important for the so-called late stage functionalization synthetic approach. In this work, we verified the possibility of achieving this by adding acids of different strengths. Using a substrate containing two differently strong (and basic) directing groups, the influence of the addition of acids on the regioselectivity of the C-H activation step of the reaction with palladium acetate was thoroughly studied. The addition of no or weak acids results in cyclopalladation being controlled by a stronger directing group. However, the addition of a strong acid causes protonation of this group and the reaction is then controlled by a weaker directing group. Finally, this approach enables double C-H activation leading to a unique class of compounds: "non-symmetrical" [2.2]-dipalladaparacyclophanes.

Change in the food environment and measured adiposity in adulthood in the Christchurch Health and development birth cohort, Aotearoa, New Zealand: A birth cohort study.

This study investigated associations between change in the food environment and change in measured body mass index (BMI) and waist circumference (WC) in the Christchurch Health and Development Study (CHDS) birth cohort. Our findings suggest that cohort members who experienced the greatest proportional change towards better access to fast food outlets had the slightly larger increases in BMI and WC. Contrastingly, cohort members who experienced the greatest proportional change towards shorter distance and better access to supermarkets had slightly smaller increases in BMI and WC. Our findings may help explain the changes in BMI and WC at a population level.

Eschenmoser coupling reactions starting from primary thioamides. When do they work and when not?

Reactions of thiobenzamide or thioacetamide with 4-bromo-1,1-dimethyl-1,4-dihydroisoquinoline-3(2H)-one, 4-bromoisoquinoline-1,3(2H,4H)-dione and two α-bromo(phenyl)acetamides were examined under various conditions (base, solvent, thiophile, temperature) and structure/medium features that influence product distribution (Eschenmoser coupling reaction, Hantzsch thiazole synthesis and elimination to nitriles) were identified. The key factor that enables the successful Eschenmoser coupling reaction involves the optimum balance in acidity of nitrogen and carbon atoms of the intermediary α-thioiminium salts.

Single proton LET characterization with the Timepix detector and artificial intelligence for advanced proton therapy treatment planning.

Objective.Protons have advantageous dose distributions and are increasingly used in cancer therapy. At the depth of the Bragg peak range, protons produce a mixed radiation field consisting of low- and high-linear energy transfer (LET) components, the latter of which is characterized by an increased ionization density on the microscopic scale associated with increased biological effectiveness. Prediction of the yield and LET of primary and secondary charged particles at a certain depth in the patient is performed by Monte Carlo simulations but is difficult to verify experimentally.Approach.Here, the results of measurements performed with Timepix detector in the mixed radiation field produced by a therapeutic proton beam in water are presented and compared to Monte Carlo simulations. The unique capability of the detector to perform high-resolution single particle tracking and identification enhanced by artificial intelligence allowed to resolve the particle type and measure the deposited energy of each particle comprising the mixed radiation field. Based on the collected data, biologically important physics parameters, the LET of single protons and dose-averaged LET, were computed.Main results.An accuracy over 95% was achieved for proton recognition with a developed neural network model. For recognized protons, the measured LET spectra generally agree with the results of Monte Carlo simulations. The mean difference between dose-averaged LET values obtained from measurements and simulations is 17%. We observed a broad spectrum of LET values ranging from a fraction of keVµm-1to about 10 keVµm-1for most of the measurements performed in the mixed radiation fields.Significance.It has been demonstrated that the introduced measurement method provides experimental data for validation of LETDor LET spectra in any treatment planning system. The simplicity and accessibility of the presented methodology make it easy to be translated into a clinical routine in any proton therapy facility.

Timepix3: Compensation of Thermal Distortion of Energy Measurement.

The Timepix3 is a hybrid pixellated radiation detector consisting of a 256 px × 256 px radiation-sensitive matrix. Research has shown that it is susceptible to energy spectrum distortion due to temperature variations. This can lead to a relative measurement error of up to 35% in the tested temperature range of 10 °C to 70 °C. To overcome this issue, this study proposes a complex compensation method to reduce the error to less than 1%. The compensation method was tested with different radiation sources, focusing on energy peaks up to 100 keV. The results of the study showed that a general model for temperature distortion compensation could be established, where the error in the X-ray fluorescence spectrum of Lead (74.97 keV) was reduced from 22% to less than 2% for 60 °C after the correction was applied. The validity of the model was also verified at temperatures below 0 °C, where the relative measurement error for the Tin peak (25.27 keV) was reduced from 11.4% to 2.1% at -40 °C. The results of this study demonstrate the effectiveness of the proposed compensation method and models in significantly improving the accuracy of energy measurements. This has implications for various fields of research and industry that require accurate radiation energy measurements and cannot afford to use power for cooling or temperature stabilisation of the detector.

Timepix3: Temperature Influence on Radiation Energy Measurement with Si Sensor.

The Timepix3 readout ASIC chip is a hybrid pixelated radiation detector, designed at CERN, which contains a 256 px × 256 px matrix. Each of the 65,536 radiation-sensitive pixels can record an incoming particle, its energy deposition or time of arrival and measure them simultaneously. Since the detector is suitable for a wide range of applications from particle physics, national security and medicine to space science, it can be used in a wide range of temperatures. Until now, it has to be calibrated every time to the operating point of the application. This paper studies the possibility of energy measurement with Timepix3 equipped with a 500 m thick silicon sensor and MiniPIX readout interface in the temperatures between 10 ∘C and 70 ∘C with only one calibration. The detector has been irradiated by X-ray fluorescence photons in the energy range from 8 keV to 57 keV, and 31 keV to 81 keV photons from the 133Ba radioactive source. A deviation of 5% in apparent energy value may occur for a 10 ∘C change in temperature from the reference point, but, with the next temperature change, it can reach up to -30%. Moreover, Barium photons with an energy of 81 keV appear as deposited energy of only 55 keV at a detector temperature of 70 ∘C. An original compensation method that reduces the relative measurement error from -30% to less than 1% is presented in this paper.

Biophysical characterization of collimated and uncollimated fields in pencil beam scanning proton therapy.

Objective. The lateral dose fall-off in proton pencil beam scanning (PBS) technique remains the preferred choice for sparing adjacent organs at risk as opposed to the distal edge due to the proton range uncertainties and potentially high relative biological effectiveness. However, because of the substantial spot size along with the scattering in the air and in the patient, the lateral penumbra in PBS can be degraded. Combining PBS with an aperture can result in a sharper dose fall-off, particularly for shallow targets.Approach. The aim of this work was to characterize the radiation fields produced by collimated and uncollimated 100 and 140 MeV proton beams, using Monte Carlo simulations and measurements with a MiniPIX-Timepix detector. The dose and the linear energy transfer (LET) were then coupled with publishedin silicobiophysical models to elucidate the potential biological effects of collimated and uncollimated fields.Main results. Combining an aperture with PBS reduced the absorbed dose in the lateral fall-off and out-of-field by 60%. However, the results also showed that the absolute frequency-averaged LET (LETF) values increased by a maximum of 3.5 keVµm-1in collimated relative to uncollimated fields, while the dose-averaged LET (LETD) increased by a maximum of 7 keVµm-1. Despite the higher LET values produced by collimated fields, the predicted DNA damage yields remained lower, owing to the large dose reduction.Significance. This work demonstrated the dosimetric advantages of combining an aperture with PBS coupled with lower DNA damage induction. A methodology for calculating dose in water derived from measurements with a silicon-based detector was also presented. This work is the first to demonstrate experimentally the increase in LET caused by combining PBS with aperture, and to assess the potential DNA damage which is the initial step in the cascade of events leading to the majority of radiation-induced biological effects.

Out-of-field measurements and simulations of a proton pencil beam in a wide range of dose rates using a Timepix3 detector: Dose rate, flux and LET.

Stray radiation produced by ultra-high dose-rates (UHDR) proton pencil beams is characterized using ASIC-chip semiconductor pixel detectors. A proton pencil beam with an energy of 220 MeV was utilized to deliver dose rates (DR) ranging from conventional radiotherapy DRs up to 270 Gy/s. A MiniPIX Timepix3 detector equipped with a silicon sensor and integrated readout electronics was used. The chip-sensor assembly and chipboard on water-equivalent backing were detached and immersed in the water-phantom. The deposited energy, particle flux, DR, and the linear energy transfer (LET(Si)) spectra were measured in the silicon sensor at different positions both laterally, at different depths, and behind the Bragg peak. At low-intensity beams, the detector is operated in the event-by-event data-driven mode for high-resolution spectral tracking of individual particles. This technique provides precise energy loss response and LET(Si) spectra with radiation field composition resolving power. At higher beam intensities a rescaling of LET(Si) can be performed as the distribution of the LET(Si) spectra exhibits the same characteristics regardless of the delivered DR. The integrated deposited energy and the absorbed dose can be thus measured in a wide range. A linear response of measured absorbed dose was obtained by gradually increasing the delivered DR to reach UHDR beams. Particle tracking of scattered radiation in data-driven mode could be performed at DRs up to 0.27 Gy/s. In integrated mode, the saturation limits were not reached at the measured out-of-field locations up to the delivered DR of over 270 Gy/s. A good agreement was found between measured and simulated absorbed doses.

Mental health inequities for Maori youth: a population-level study of mental health service data.

AIM: To examine specialist mental health service, hospital discharge, and pharmaceutical dispensing data for emotional conditions (anxiety, depression), substance use, and self-harm for Maori compared to non-Maori/non-Pasifika (NMNP) youth. METHODS: A novel population-level case identification method using New Zealand's Integrated Data Infrastructure for 232,845 Maori and 627,891 NMNP aged 10-24 years. Descriptive statistics on mental health conditions were generated and stratified by Maori/NMNP. Unadjusted and adjusted risk ratios (RRs) of mental health conditions were generated using generalised linear regression. RESULTS: Maori were less likely to be identified for anxiety (ARR=0.88; 95% CI 0.85-0.90) or depression (ARR=0.92; 95% CI 0.90-0.95) than NMNP. They were more likely to be identified for substance problems (ARR)=2.66; 95% CI 2.60-2.71) and self-harm (ARR=1.56; 95% CI 1.50-1.63). Maori living in high deprivation areas were significantly more likely to be identified for substance problems, but less likely for emotional conditions, than Maori in least deprived areas. CONCLUSION: Despite known high levels of mental health concerns for rangatahi Maori, administrative data suggests significant under-reporting, assessment, and treatment of emotional conditions relative to NMNP. These differences were exacerbated by deprivation. Maori were more likely to be referred to services for externalised symptoms of distress (substance use and self-harm).

Monte Carlo modelling of pixel clusters in Timepix detectors using the MCNP code.

The track structure of the signal measured by the semiconductor pixel detector Timepix3 was modelled in the Monte Carlo MCNP® code. A detailed model at the pixel-level (256 × 256 pixels, 55 × 55 µm2 pixel size) was developed and used to generate and store clusters of adjacent hit pixels observed in the measured data because of particle energy deposition path, charge sharing, and drift processes. An analytical model of charge sharing effect and the detector energy resolution was applied to the simulated data. The method will help the user sort the measured clusters and distinguish radiation components of mixed fields by determining the response of Timepix3 detector to particular particle types, energies, and incidence angles that cannot be measured separately.

Synthesis and Characterization of New Boron Compounds Using Reaction of Diazonium Tetraphenylborate with Enaminoamides.

A family of oxazaborines, diazaborinones, triazaborines, and triazaborinones was prepared by reaction of polarized ethylenes, such as ß-enaminoamides, with 4-methylbenzenediazonium tetraphenylborates. The reaction conditions (stirring in CH2Cl2 at room temperature (Method A) or stirring with CH3COONa in CH2Cl2 at room temperature (Method B) or refluxing in the CH2Cl2/toluene mixture (Method C)) controlled the formation and relative content of these compounds in the reaction mixtures from one to three products. Substituted oxazaborines gradually rearranged into diazaborinones at 250 °C. The prepared compounds were characterized by 1H NMR, 13C NMR, IR, and UV-Vis spectroscopy, HRMS, or microanalysis. The structure of individual compounds was confirmed by 11B NMR, 15N NMR, 1D NOESY, and X-ray analysis. The mechanism of reaction of enaminoamides with 4-methylbenzenediazonium tetraphenylborate was proposed.

Synthesis of the Kinase Inhibitors Nintedanib, Hesperadin, and Their Analogues Using the Eschenmoser Coupling Reaction.

A novel synthetic approach involving an Eschenmoser coupling reaction of substituted 3-bromooxindoles (H, 6-Cl, 6-COOMe, 5-NO2) with two substituted thiobenzanilides in dimethylformamide or acetonitrile was used for the synthesis of eight kinase inhibitors including Nintedanib and Hesperadin in yields exceeding 76%. Starting compounds for the synthesis are also easily available in good yields. 3-Bromooxindoles were prepared either from corresponding isatins using a three-step synthesis in an average overall yield of 65% or by direct bromination of oxindoles (yield of 65-86%). Starting N-(4-piperidin-1-ylmethyl-phenyl)-thiobenzamide was prepared by thionation of the corresponding benzanilide in an 86% yield and N-methyl-N-(4-thiobenzoylaminophenyl)-2-(4-methylpiperazin-1-yl)acetamide was prepared by thioacylation of the corresponding aniline with methyl dithiobenzoate in an 86% yield.

Quality assurance method for monitoring of lateral pencil beam positions in scanned carbon-ion radiotherapy using tracking of secondary ions.

PURPOSE: Ion beam radiotherapy offers enhances dose conformity to the tumor volume while better sparing healthy tissue compared to conventional photon radiotherapy. However, the increased dose gradient also makes it more sensitive to uncertainties. While the most important uncertainty source is the patient itself, the beam delivery is also subject to uncertainties. Most of the proton therapy centers used cyclotrons, which deliver typically a stable beam over time, allowing a continuous extraction of the beam. Carbon-ion beam radiotherapy (CIRT) in contrast uses synchrotrons and requires a larger and energy-dependent extrapolation of the nozzle-measured positions to obtain the lateral beam positions in the isocenter, since the nozzle-to-isocenter distance is larger than for cyclotrons. Hence, the control of lateral pencil beam positions at isocenter in CIRT is more sensitive to uncertainties than in proton radiotherapy. Therefore, an independent monitoring of the actual lateral positions close to the isocenter would be very valuable and provide additional information. However, techniques capable to do so are scarce, and they are limited in precision, accuracy and effectivity. METHODS: The detection of secondary ions (charged nuclear fragments) has previously been exploited for the Bragg peak position of C-ion beams. In our previous work, we investigated for the first time the feasibility of lateral position monitoring of pencil beams in CIRT. However, the reported precision and accuracy were not sufficient for a potential implementation into clinical practice. In this work, it is shown how the performance of the method is improved to the point of clinical relevance. To minimize the observed uncertainties, a mini-tracker based on hybrid silicon pixel detectors was repositioned downstream of an anthropomorphic head phantom. However, the secondary-ion fluence rate in the mini-tracker rises up to 1.5 × 105 ions/s/cm2 , causing strong pile-up of secondary-ion signals. To solve this problem, we performed hardware changes, optimized the detector settings, adjusted the setup geometry and developed new algorithms to resolve ambiguities in the track reconstruction. The performance of the method was studied on two treatment plans delivered with a realistic dose of 3 Gy (RBE) and averaged dose rate of 0.27 Gy/s at the Heidelberg Ion-Beam Therapy Center (HIT) in Germany. The measured lateral positions were compared to reference beam positions obtained either from the beam nozzle or from a multi-wire proportional chamber positioned at the room isocenter. RESULTS: The presented method is capable to simultaneously monitor both lateral pencil beam coordinates over the entire tumor volume during the treatment delivery, using only a 2-cm2 mini-tracker. The effectivity (defined as the fraction of analyzed pencil beams) was 100%. The reached precision of (0.6 to 1.5) mm and accuracy of (0.5 to 1.2) mm are in line with the clinically accepted uncertainty for QA measurements of the lateral pencil beam positions. CONCLUSIONS: It was demonstrated that the performance of the method for a non-invasive lateral position monitoring of pencil beams is sufficient for a potential clinical implementation. The next step is to evaluate the method clinically in a group of patients in a future observational clinical study.

Investigating the Association Between Child Television Viewing and Measured Child Adiposity Outcomes in a Large Nationally Representative Sample of New Zealanders: A Cross-Sectional Study.

BACKGROUND: This study investigates the association between television (TV) viewing and child adiposity and if parental education and child ethnicity moderate this association. METHOD: Cross-sectional, pooled (2013/2014-2016/2017) adult and child New Zealand Health Survey were matched resulting in 13,039 children (2-14 y) and parent dyads. Child TV viewing was estimated using self-reported time for each weekday and weekend. The height (in centimeters), weight (in kilograms), and waist circumference of parents and children were measured. Childhood body mass index and obesity were defined using the International Obesity Task Force cutoff values. Effect modification was assessed by interaction and then by stratifying regression analyses by parent education (low, moderate, and high) and child ethnicity (Asian, European/other, Maori, and Pacific). RESULTS: Overall, watching ≥2 hours TV on average per day in the past week, relative to <2 hours TV viewing, was associated with a higher odds of obesity (adjusted odds ratio = 1.291 [1.108-1.538]), higher body mass index z score (b = 0.123 [0.061-0.187]), and higher waist circumference (b = 0.546 [0.001-1.092]). Interactions considering this association by child ethnicity and parent education revealed little evidence of effect modification. CONCLUSION: While TV viewing was associated with child adiposity, the authors found little support for a moderating role of parental education and child ethnicity.

The good, the bad, and the environment: developing an area-based measure of access to health-promoting and health-constraining environments in New Zealand.

BACKGROUND: Accounting for the co-occurrence of multiple environmental influences is a more accurate reflection of population exposure than considering isolated influences, aiding in understanding the complex interactions between environments, behaviour and health. This study examines how environmental 'goods' such as green spaces and environmental 'bads' such as alcohol outlets co-occur to develop a nationwide area-level healthy location index (HLI) for New Zealand. METHODS: Nationwide data were collected, processed, and geocoded on a comprehensive range of environmental exposures. Health-constraining 'bads' were represented by: (i) fast-food outlets, (ii) takeaway outlets, (iii) dairy outlets and convenience stores, (iv) alcohol outlets, (v) and gaming venues. Health-promoting 'goods' were represented by: (i) green spaces, (ii) blue spaces, (iii) physical activity facilities, (iv) fruit and vegetable outlets, and (v) supermarkets. The HLI was developed based on ranked access to environmental domains. The HLI was then used to investigate socio-spatial patterning by area-level deprivation and rural/urban classification. RESULTS: Results showed environmental 'goods' and 'bads' co-occurred together and were patterned by area-level deprivation. The novel HLI shows that the most deprived areas of New Zealand often have the most environmental 'bads' and less access to environmental 'goods'. CONCLUSIONS: The index, that is now publicly available, is able to capture both inter-regional and local variations in accessibility to health-promoting and health-constraining environments and their combination. Results in this study further reinforce the need to embrace the multidimensional nature of neighbourhood and place not only when designing health-promoting places, but also when studying the effect of existing built environments on population health.

National movement patterns during the COVID-19 pandemic in New Zealand: the unexplored role of neighbourhood deprivation.

BACKGROUND: The COVID-19 pandemic has asked unprecedented questions of governments around the world. Policy responses have disrupted usual patterns of movement in society, locally and globally, with resultant impacts on national economies and human well-being. These interventions have primarily centred on enforcing lockdowns and introducing social distancing recommendations, leading to questions of trust and competency around the role of institutions and the administrative apparatus of state. This study demonstrates the unequal societal impacts in population movement during a national 'lockdown'. METHODS: We use nationwide mobile phone movement data to quantify the effect of an enforced lockdown on population mobility by neighbourhood deprivation using an ecological study design. We then derive a mobility index using anonymised aggregated population counts for each neighbourhood (2253 Census Statistical Areas; mean population n=2086) of national hourly mobile phone location data (7.45 million records, 1 March 2020-20 July 2020) for New Zealand (NZ). RESULTS: Curtailing movement has highlighted and exacerbated underlying social and spatial inequalities. Our analysis reveals the unequal movements during 'lockdown' by neighbourhood socioeconomic status in NZ. CONCLUSION: In understanding inequalities in neighbourhood movements, we are contributing critical new evidence to the policy debate about the impact(s) and efficacy of national, regional or local lockdowns which have sparked such controversy.