Few-femtosecond electron transfer dynamics in photoionized donor-π-acceptor molecules.

The exposure of molecules to attosecond extreme-ultraviolet (XUV) pulses offers a unique opportunity to study the early stages of coupled electron-nuclear dynamics in which the role played by the different degrees of freedom is beyond standard chemical intuition. We investigate, both experimentally and theoretically, the first steps of charge-transfer processes initiated by prompt ionization in prototype donor-π-acceptor molecules, namely nitroanilines. Time-resolved measurement of this process is performed by combining attosecond XUV-pump/few-femtosecond infrared-probe spectroscopy with advanced many-body quantum chemistry calculations. We show that a concerted nuclear and electronic motion drives electron transfer from the donor group on a sub-10-fs timescale. This is followed by a sub-30-fs relaxation process due to the probing of the continuously spreading nuclear wave packet in the excited electronic states of the molecular cation. These findings shed light on the role played by electron-nuclear coupling in donor-π-acceptor systems in response to photoionization.

Coronene-Based 2D Networks by On-Surface Skeletal Rearrangement of Sumanene Precursors.

The design of novel low-dimensional carbon materials is at the forefront of modern chemistry. Recently, on-surface covalent synthesis has emerged as a powerful strategy to synthesize previously precluded compounds and polymers. Here, we report a scanning probe microscopy study, complemented by theoretical calculations, about the sequential skeletal rearrangement of sumanene-based precursors into a coronene-based organometallic network by stepwise intra- and inter-molecular reactions on Au(111). Interestingly, upon higher annealing, the formed organometallic networks evolve into two-dimensional coronene-based covalently-linked patches through intermolecular homocoupling reactions. A new reaction mechanism is proposed based on the role of C-Au-C motifs to promote two stepwise carbon-carbon couplings to form cyclobutadiene bridges. Our results pave avenues for the conversion of molecular precursors on surfaces, affording the design of unexplored two-dimensional organometallic and covalent materials.

On-Surface Covalent Synthesis of Carbon Nanomaterials by Harnessing Carbon gem-Polyhalides.

The design of innovative carbon-based nanostructures stands at the forefront of both chemistry and materials science. In this context, π-conjugated compounds are of great interest due to their impact in a variety of fields, including optoelectronics, spintronics, energy storage, sensing and catalysis. Despite extensive research efforts, substantial knowledge gaps persist in the synthesis and characterization of new π-conjugated compounds with potential implications for science and technology. On-surface synthesis has emerged as a powerful discipline to overcome limitations associated with conventional solution chemistry methods, offering advanced tools to characterize the resulting nanomaterials. This review specifically highlights recent achievements in the utilization of molecular precursors incorporating carbon geminal (gem)-polyhalides as functional groups to guide the formation of π-conjugated 0D species, as well as 1D, quasi-1D π-conjugated polymers, and 2D nanoarchitectures. By delving into reaction pathways, novel structural designs, and the electronic, magnetic, and topological features of the resulting products, the review provides fundamental insights for a new generation of π-conjugated materials.

Erratum: Survey of Conductive Polymers for the Fabrication of Conformation Switching Nucleic Acid-Based Electrochemical Biosensors.

[This corrects the article DOI: 10.1021/acsapm.3c02206.].

Controllable Structural Transformation of Non-Porous Propyl-Malonate Hexakis[60]fullerene by Chloroform Uptake/Release.

The design of dynamic structures with high recognition host-guest materials capable to host selectively small volatile molecules is an emergent field of research with both fundamental and applied implications. The challenge of exploring novel materials with advanced functionalities has led to the development of dynamic crystalline structures promoted by soft interactions. Here, a new pure organic dynamic framework based on hexakis[60]fullerene that are held together by weak van der Waals interactions is described. This crystalline structure is capable of absorbing and releasing chloroform, through internal structural reorganization. This research provides new insight into the design of organic molecular crystals for selective adsorption applications.

Nanotube-Like Electronic States in [5,5]-C90 Fullertube Molecules.

Fullertubes, that is, fullerenes consisting of a carbon nanotube moiety capped by hemifullerene ends, are emerging carbon nanomaterials whose properties show both fullerene and carbon nanotube (CNT) traits. Albeit it may be expected that their electronic states show a certain resemblance to those of the extended nanotube, such a correlation has not yet been found or described. Here it shows a scanning tunneling microscopy (STM) and spectroscopy (STS) characterization of the adsorption, self-assembly, and electronic structure of 2D arrays of [5,5]-C90 fullertube molecules on two different noble metal surfaces, Ag(111) and Au(111). The results demonstrate that the shape of the molecular orbitals of the adsorbed fullertubes corresponds closely to those expected for isolated species on the grounds of density functional theory calculations. Moreover, a comparison between the electronic density profiles in the bands of the extended [5,5]-CNT and in the molecules reveals that some of the frontier orbitals of the fullertube molecules can be described as the result of the quantum confinement imposed by the hemifullerene caps to the delocalized band states in the extended CNT. The results thus provide a conceptual framework for the rational design of custom fullertube molecules and can potentially become a cornerstone in the understanding of these new carbon nanoforms.

n-Type Fullerene-Carbon Dots: Synthesis and Electrochemical and Photophysical Properties.

The covalent incorporation of C60 and C70 derivatives of the well-known n-type organic semiconductor PCBM ([6,6]-phenyl-C61-butyric acid methyl ester) onto carbon dots (CD) is described. Morphological and structural characterization reveal combined features of both pristine starting materials (CD and PCBM). Electrochemical investigations evidenced the existence of additional reduction processes to that of CD or PCBM precursors, showing rich electron-acceptor capabilities, with multistep processes in an affordable and narrow electrochemical window (ca. 1.5 V). Electronic communication in the obtained nanoconjugated species were derived from steady-state absorption and emission spectroscopies, which showed bathochromically shifted absorptions and emissions well entering the red region. Finally, the lower fluorescence quantum yield of CD-PCBM nanoconjugates, compared with CD, and the fast decay of the observed emission of CD, support the existence of an electronic communication between both CD and PCBM units in the excited state.

C60-based Multivalent Glycoporphyrins Inhibit SARS-CoV-2 Specific Interaction with the DC-SIGN Transmembrane Receptor.

Since WHO has declared the COVID-19 outbreak a global pandemic, nearly seven million deaths have been reported. This efficient spread of Severe Acute Respiratory Syndrome Coronavirus-2 (SARS-CoV-2) is facilitated by the ability of the spike glycoprotein to bind multiple cell membrane receptors. Although ACE2 is identified as the main receptor for SARS-CoV-2, other receptors could play a role in viral entry. Among others, C-type lectins such as DC-SIGN are identified as efficient trans-receptor for SARS-CoV-2 infection, so the use of glycomimetics to inhibit the infection through the DC-SIGN blockade is an encouraging approach. In this regard, multivalent nanostructures based on glycosylated [60]fullerenes linked to a central porphyrin scaffold have been designed and tested against DC-SIGN-mediated SARS-CoV-2 infection. First results show an outstanding inhibition of the trans-infection up to 90%. In addition, a deeper understanding of nanostructure-receptor binding is achieved through microscopy techniques, high-resolution NMR experiments, Quartz Crystal Microbalance experiments, and molecular dynamic simulations.

Tetrahedraphene: A Csp3 -centered 3D Molecular Nanographene Showing Aggregation-Induced Emission.

The bottom-up synthesis of 3D tetrakis(hexa-peri-hexabenzocoronenyl)methane, "tetrahedraphene", is reported. This molecular nanographene constituted by four hexa-peri-hexabenzocoronene (HBC) units attached to a central sp3 carbon atom, shows a highly symmetric arrangement of the HBC units disposed in the apex of a tetrahedron. The X-ray crystal structure reveals a tetrahedral symmetry of the molecule and the packing in the crystal is achieved mostly by CH⋅⋅⋅π interactions since the interstitial solvent molecules prevent the π⋅⋅⋅π interactions. In solution, tetrahedraphene shows the same electrochemical and photophysical properties as the hexa-t Bu-substituted HBC (t Bu-HBC) molecule. However, upon water addition, it undergoes a fluorescence change in solution and in the precipitated solid, showing an aggregation induced emission (AIE) process, probably derived from the restriction in the rotation and/or vibration of the HBCs. Time-Dependent Density Functional Theory (TDDFT) calculations reveal that upon aggregation, the high energy region of the emission band decreases in intensity, whereas the intensity of the red edge emission signal increases and presents a smoother decay, compared to the non-aggregated molecule. All in all, the excellent correlation between our simulations and the experimental findings allows explaining the colour change observed in the different solutions upon increasing the water fraction.

Dimeric tetrabromo-p-quinodimethanes: synthesis and structural/electronic properties.

Despite their great potential as molecular building blocks for organic synthesis, tetrabromo-p-quinodimethanes (TBQs) are a relatively unknown family of compounds. Herein, we showcase a series of five derivatives incorporating two tetrabromo-anthraquinodimethane (TBAQ) units linked by π-conjugated spacers of different nature and length. The resulting dimers TBQ1-5 are fully characterised by means of thorough spectroscopic measurements and theoretical calculations. Interestingly, owing to the steric hindrance imposed by the four bulky bromine atoms, the TBAQ fragments adopt a characteristically warped geometry, somehow resemblant of a butterfly, and the novel dimers show a complex NMR pattern with signal splittings. To ascertain whether dynamic processes regarding fluxional inversion of the butterfly configurations are involved, first-principles calculations assessing the interconversion energy barriers are performed. Three possible stereoisomers are predicted involving two diastereomers, thus accounting for the observed NMR spectra. The rotational freedom of the TBAQ units around the π-conjugated linker influences the structural and electronic properties of TBQ1-5 and modulates the electronic communication between the terminal TBAQ moieties. The role of the linker on the electronic properties is investigated by Raman and UV-vis spectroscopies, theoretical calculations and UV-vis measurements at low temperature. TBQ1-5 are of interest as less-explored structural building precursors for a variety of scientific areas. Finally, the sublimation, self-assembly and reactivity on Au(111) of TBQ3 is assessed.

Helical Bilayer Nanographenes: Impact of the Helicene Length on the Structural, Electrochemical, Photophysical, and Chiroptical Properties.

Helical bilayer nanographenes (HBNGs) are chiral π-extended aromatic compounds consisting of two π-π stacked hexabenzocoronenes (HBCs) joined by a helicene, thus resembling van der Waals layered 2D materials. Herein, we compare [9]HBNG, [10]HBNG, and [11]HBNG helical bilayers endowed with [9], [10], and [11]helicenes embedded in their structure, respectively. Interestingly, the helicene length defines the overlapping degree between the two HBCs (number of benzene rings involved in π-π interactions between the two layers), being 26, 14, and 10 benzene rings, respectively, according to the X-ray analysis. Unexpectedly, the electrochemical study shows that the lesser π-extended system [9]HBNG shows the strongest electron donor character, in part by interlayer exchange resonance, and more red-shifted values of emission. Furthermore, [9]HBNG also shows exceptional chiroptical properties with the biggest values of gabs and glum (3.6 × 10-2) when compared to [10]HBNG and [11]HBNG owing to the fine alignment in the configuration of [9]HBNG between its electric and magnetic dipole transition moments. Furthermore, spectroelectrochemical studies as well as the fluorescence spectroscopy support the aforementioned experimental findings, thus confirming the strong impact of the helicene length on the properties of this new family of bilayer nanographenes.

Curved Nanographenes: Multiple Emission, Thermally Activated Delayed Fluorescence, and Non-Radiative Decay.

The intriguing and rich photophysical properties of three curved nanographenes (CNG 6, 7, and 8) are investigated by time-resolved and temperature-dependent photoluminescence (PL) spectroscopy. CNG 7 and 8 exhibit dual fluorescence, as well as dual phosphorescence at low temperature in the main PL bands. In addition, hot bands are detected in fluorescence as well as phosphorescence, and, in the narrow temperature range of 100-140 K, thermally activated delayed fluorescence (TADF) with lifetimes on the millisecond time-scale is observed. These findings are rationalized by quantum-chemical simulations, which predict a single minimum of the S1 potential of CNG 6, but two S1 minima for CNG 7 and CNG 8, with considerable geometric reorganization between them, in agreement with the experimental findings. Additionally, a higher-lying S2 minimum close to S1 is optimized for the three CNG, from where emission is also possible due to thermal activation and, hence, non-Kasha behavior. The presence of higher-lying dark triplet states close to the S1 minima provides mechanistic evidence for the TADF phenomena observed. Non-radiative decay of the T1 state appears to be thermally activated with activation energies of roughly 100 meV and leads to disappearance of phosphorescence and TADF at T > 140 K.

Enhanced Thermoelectricity in Metal-[60]Fullerene-Graphene Molecular Junctions.

The thermoelectric properties of molecular junctions consisting of a metal Pt electrode contacting [60]fullerene derivatives covalently bound to a graphene electrode have been studied by using a conducting-probe atomic force microscope (c-AFM). The [60]fullerene derivatives are covalently linked to the graphene via two meta-connected phenyl rings, two para-connected phenyl rings, or a single phenyl ring. We find that the magnitude of the Seebeck coefficient is up to nine times larger than that of Au-C60-Pt molecular junctions. Moreover, the sign of the thermopower can be either positive or negative depending on the details of the binding geometry and on the local value of the Fermi energy. Our results demonstrate the potential of using graphene electrodes for controlling and enhancing the thermoelectric properties of molecular junctions and confirm the outstanding performance of [60]fullerene derivatives.

Stoichiometry-Directed Two-Level Hierarchical Growth of Lanthanide-Based Supramolecular Nanoarchitectures.

The design of a well-ordered arrangement of atoms on a solid surface has long been sought due to the envisioned applications in many different fields. On-surface synthesis of metal-organic networks is one of the most promising fabrication techniques. Hierarchical growth, which involves coordinative schemes with weaker interactions, favours the formation of extended areas with the desired complex structure. However, the control of such hierarchical growth is in its infancy, particularly for lanthanide-based architectures. Here the hierarchical growth of a Dy-based supramolecular nanoarchitecture on Au(111) is described. Such an assembly is based on a first hierarchical level of metallo-supramolecular motifs, which in a second level of hierarchy self-assemble through directional hydrogen bonds, giving rise to a periodic two-dimensional supramolecular porous network. Notably, the size of the metal-organic based tecton of the first level of hierarchy can be tailored by modifying the metal-ligand stoichiometric ratio.

Synthesis of [60]Fullerene Hybrids Endowed with Steroids and Monosaccharides: Theoretical Underpinning as Promising anti-SARS-CoV-2 Agents.

Cyclopropanation reactions between C60 and different malonates decorated with monosaccharides and steroids using the Bingel-Hirsch methodology have allowed the obtention of a new family of hybrid compounds in good yields. A complete set of instrumental techniques has allowed us to fully characterize the hybrid derivatives and to determine the chemical structure of monocycloadducts. Besides, the proposed structures were investigated by cyclic voltammetry, which evidenced the exclusive reductive pattern of fullerene Bingel-type monoadducts. Theoretical calculations at the DFT-D3(BJ)/PBE 6-311G(d,p) level of the synthesized conjugates predict the most stable conformation and determine the factors that control the hybrid molecules' geometry. Some parameters such as polarity, lipophilicity, polar surface area, hydrophilicity index, and solvent-accessible surface area were also estimated, predicting its potential permeability and capability as cell membrane penetrators. Additionally, a molecular docking simulation has been carried out using the main protease of SARS-CoV-2 (Mpro) as the receptor, thus paving the way to study the potential application of these hybrids in biomedicine.

Electronic Control of the Scholl Reaction: Selective Synthesis of Spiro vs Helical Nanographenes.

Scholl oxidation has become an essential reaction in the bottom-up synthesis of molecular nanographenes. Herein, we describe a Scholl reaction controlled by the electronic effects on the starting substrate (1 a, b). Anthracene-based polyphenylenes lead to spironanographenes under Scholl conditions. In contrast, an electron-deficient anthracene substrate affords a helically arranged molecular nanographene formed by two orthogonal dibenzo[fg,ij]phenanthro-[9,10,1,2,3-pqrst]pentaphene (DBPP) moieties linked through an octafluoroanthracene core. Density Functional Theory (DFT) calculations predict that electronic effects control either the first formation of spirocycles and subsequent Scholl reaction to form spironanographene 2, or the expected dehydrogenation reaction leading solely to the helical nanographene 3. The crystal structures of four of the new spiro compounds (syn 2, syn 9, anti 9 and syn 10) were solved by single crystal X-ray diffraction. The photophysical properties of the new molecular nanographene 3 reveal a remarkable dual fluorescent emission.

Safety assessment of new nanodiamonds@corrole hybrids addressed by the response of RAW-264.7 macrophages.

Safety assessment of carbon nanomaterials is of paramount importance since they are on the frontline for applications in sensing, bioimaging and drug delivery. The biocompatibility and safety of functionalized nanodiamonds (NDs) are here addressed through the study of the pro-inflammatory response of RAW-264.7 macrophages exposed to new nanodiamonds@corrole hybrids. The corrole unit selected is as a prototype for a hydrophobic organic molecule that can function as a NIR fluorophore reporter, an optical sensor, a photodynamic therapy agent or a photocatalyst. The new functional nanohybrids containing detonated nanodiamonds (NDs) were obtained through esterification using carboxylated NDs and glycol corroles. The success of the covalent functionalization via carbodiimide activation was confirmed through X-ray photoelectron spectroscopy (XPS), Raman and Fourier transform infrared (FTIR) spectroscopy. The UV-vis absorption and emission spectra of the hybrids are additive with respect to the corrole features. The cellular uptake, localization, cell viability and effects on immune cell activation of the new hybrids and of the precursors were carefully investigated using RAW-264.7 macrophages. Overall results showed that the ND@corrole hybrids had no pro-inflammatory effects on the RAW-264.7 macrophage cell line, making them an ideal candidate for a wide range of biomedical applications.

A pH-independent electrochemical aptamer-based biosensor supports quantitative, real-time measurement in vivo.

The development of biosensors capable of achieving accurate and precise molecular measurements in the living body in pH-variable biological environments (e.g. subcellular organelles, biological fluids and organs) plays a significant role in personalized medicine. Because they recapitulate the conformation-linked signaling mechanisms, electrochemical aptamer-based (E-AB) sensors are good candidates to fill this role. However, this class of sensors suffers from a lack of a stable and pH-independent redox reporter to support their utility under pH-variable conditions. Here, in response, we demonstrate the efficiency of an electron donor π-extended tetrathiafulvalene (exTTF) as an excellent candidate (due to its good electrochemical stability and no proton participation in its redox reaction) of pH-independent redox reporters. Its use has allowed improvement of E-AB sensing performance in biological fluids under different pH conditions, achieving high-frequency, real-time molecular measurements in biological samples both in vitro and in the bladders of living rats.

Supramolecular Assembly of Edge Functionalized Top-Down Chiral Graphene Quantum Dots.

The construction of supramolecular assemblies of heterogeneous materials at the nanoscale is an open challenge in science. Herein, new chiral graphene quantum dots (GQDs) prepared by amidation reaction introducing chiral amide groups and pyrene moieties into the periphery of GQDs are described. The analytical and spectroscopic data show an efficient chemical functionalization and the morphological study of the supramolecular ensembles using SEM and AFM microscopies reveals the presence of highly ordered fibers of several micrometers length. Fluorescence studies, using emission spectroscopy and confocal microscopy, reveal that the fibers stem from the π-π stacking of both pyrenes and GQDs, together with the hydrogen bonding interactions of the amide groups. Circular dichroism analysis supports the chiral nature of the supramolecular aggregates.

A 3D Peptide/[60]Fullerene Hybrid for Multivalent Recognition.

Fully substituted peptide/[60]fullerene hexakis-adducts offer an excellent opportunity for multivalent protein recognition. In contrast to monofunctionalized fullerene hybrids, peptide/[60]fullerene hexakis-adducts display multiple copies of a peptide in close spatial proximity and in the three dimensions of space. High affinity peptide binders for almost any target can be currently identified by in vitro evolution techniques, often providing synthetically simpler alternatives to natural ligands. However, despite the potential of peptide/[60]fullerene hexakis-adducts, these promising conjugates have not been reported to date. Here we present a synthetic strategy for the construction of 3D multivalent hybrids that are able to bind with high affinity the E-selectin. The here synthesized fully substituted peptide/[60]fullerene hybrids and their multivalent recognition of natural receptors constitute a proof of principle for their future application as functional biocompatible materials.