Rapid and efficient hydrogen clathrate hydrate formation in confined nanospace.

Clathrate hydrates are crystalline solids characterized by their ability to accommodate large quantities of guest molecules. Although CH4 and CO2 are the traditional guests found in natural systems, incorporating smaller molecules (e.g., H2) is challenging due to the need to apply higher pressures to stabilize the hydrogen-bonded network. Another critical limitation of hydrates is the slow nucleation and growth kinetics. Here, we show that specially designed activated carbon materials can surpass these obstacles by acting as nanoreactors promoting the nucleation and growth of H2 hydrates. The confinement effects in the inner cavities promote the massive growth of hydrogen hydrates at moderate temperatures, using pure water, with extremely fast kinetics and much lower pressures than the bulk system.

Structural Flexibility in Activated Carbon Materials Prepared under Harsh Activation Conditions.

Although traditionally high-surface area carbon materials have been considered as rigid structures with a disordered three dimensional (3D) network of graphite microdomains associated with a limited electrical conductivity (highly depending on the porous structure and surface chemistry), here we show for the first time that this is not the case for activated carbon materials prepared using harsh activation conditions (e.g., KOH activation). In these specific samples a clear structural re-orientation can be observed upon adsorption of different organic molecules, the structural changes giving rise to important changes in the electrical resistivity of the material. Whereas short chain hydrocarbons and their derivatives give rise to an increased resistivity, the contrary occurs for longer-chain hydrocarbons and/or alcohols. The high sensitivity of these high-surface area carbon materials towards these organic molecules opens the gate towards their application for sensing devices.

Micromesoporous Activated Carbons as Catalysts for the Efficient Oxidation of Aqueous Sulfide.

KOH activation of a mesophase pitch produces very efficient carbons for the removal of sulfide in aqueous solution, increasing the sulfur oxidation rate with the degree of activation of the carbon. These carbons are characterized by their graphitic structures, with domains of sizes of around 20 nm, and a moderate concentration of surface oxygen groups (0.2-0.5 mmol·g-1) dominating the basic groups. Because the activation leads first to a strong development of the micropores and later to a development of the mesopores, the surface area values are always high, reaching values of as high as 3250 m2·g-1 in the most activated carbon, with a volume of mesopores of as high as 44% of the total pore volume. In the presence of this carbon, the sulfide oxidation rate is 100 times higher than that found for a commercial activated carbon, the results indicating that the porosity of the carbon, especially mesoporosity, plays a role more important than the structure or the chemical nature of the carbon in the kinetics of sulfide oxidation to different polysulfides.

High-Performance of Gas Hydrates in Confined Nanospace for Reversible CH4 /CO2 Storage.

The molecular exchange of CH4 for CO2 in gas hydrates grown in confined nanospace has been evaluated for the first time using activated carbons as a host structure. The nano-confinement effects taking place inside the carbon cavities and the exceptional physicochemical properties of the carbon structure allows us to accelerate the formation and decomposition process of the gas hydrates from the conventional timescale of hours/days in artificial bulk systems to minutes in confined nanospace. The CH4 /CO2 exchange process is fully reversible with high efficiency at practical temperature and pressure conditions. Furthermore, these activated carbons can be envisaged as promising materials for long-distance natural gas and CO2 transportation because of the combination of a high storage capacity, a high reversibility, and most important, with extremely fast kinetics for gas hydrate formation and release.

Paving the way for methane hydrate formation on metal-organic frameworks (MOFs).

The presence of a highly tunable porous structure and surface chemistry makes metal-organic framework (MOF) materials excellent candidates for artificial methane hydrate formation under mild temperature and pressure conditions (2 °C and 3-5 MPa). Experimental results using MOFs with a different pore structure and chemical nature (MIL-100 (Fe) and ZIF-8) clearly show that the water-framework interactions play a crucial role in defining the extent and nature of the gas hydrates formed. Whereas the hydrophobic MOF promotes methane hydrate formation with a high yield, the hydrophilic one does not. The formation of these methane hydrates on MOFs has been identified for the first time using inelastic neutron scattering (INS) and synchrotron X-ray powder diffraction (SXRPD). The results described in this work pave the way towards the design of new MOF structures able to promote artificial methane hydrate formation upon request (confined or non-confined) and under milder conditions than in nature.

Methane hydrate formation in confined nanospace can surpass nature.

Natural methane hydrates are believed to be the largest source of hydrocarbons on Earth. These structures are formed in specific locations such as deep-sea sediments and the permafrost based on demanding conditions of high pressure and low temperature. Here we report that, by taking advantage of the confinement effects on nanopore space, synthetic methane hydrates grow under mild conditions (3.5 MPa and 2 °C), with faster kinetics (within minutes) than nature, fully reversibly and with a nominal stoichiometry that mimics nature. The formation of the hydrate structures in nanospace and their similarity to natural hydrates is confirmed using inelastic neutron scattering experiments and synchrotron X-ray powder diffraction. These findings may be a step towards the application of a smart synthesis of methane hydrates in energy-demanding applications (for example, transportation).

Diffusion-barrier-free porous carbon monoliths as a new form of activated carbon.

For the practical use of activated carbon (AC) as an adsorbent of CH(4) , tightly packed monoliths with high microporosity are supposed to be one of the best morphologies in terms of storage capacity per apparent volume of the adsorbent material. However, monolith-type ACs may cause diffusion obstacles in adsorption processes owing to their necked pore structures among the densely packed particles, which result in a lower adsorption performance than that of the corresponding powder ACs. To clarify the relationship between the pore structure and CH4 adsorptivity, microscopic observations, structural studies on the nanoscale, and conductivity measurements (thermal and electrical) were performed on recently developed binder-free, self-sinterable ACs in both powder and monolithic forms. The monolith samples exhibited higher surface areas and electrical conductivities than the corresponding powder samples. Supercritical CH4 adsorption isotherms were measured for each powder and monolith sample at up to 7 MPa at 263, 273, and 303 K to elucidate their isosteric heats of adsorption and adsorption rate constants, which revealed that the morphologies of the monolith samples did not cause serious drawbacks for the adsorption and desorption processes. This will further facilitate the availability of diffusion-barrier-free microporous carbon monoliths as practical CH4 storage adsorbents.

Ultrahigh CO2 adsorption capacity on carbon molecular sieves at room temperature.

Although metal-organic framework (MOF) materials have been postulated as superior to any other sorbent for CO(2) adsorption at room temperature, here we prove that the appropriate selection of the raw material and the synthesis conditions allows the preparation of carbon molecular sieves (CMSs) with adsorption capacity, on a volumetric basis, highly exceeding those reported in the literature for MOFs. Furthermore, the excellent sorption properties of CMSs over the whole pressure range (up to 50 bar) are fully reversible after different adsorption/desorption cycles.

Adsorption on heterogeneous surfaces: site energy distribution functions from Fritz-Schlüender isotherms.

Different site energy distribution functions based on the condensation approximation method are proposed for the liquid-phase or gas-phase adsorption equilibrium data following the Fritz-Schlüender isotherm. Energy distribution functions for the four limiting cases of the Fritz-Schlüender isotherm are also discussed. The proposed models are successfully applied to the experimental equilibrium data of nitrogen molecules at 77 K on a pitch-based activated carbon (PA) and a pitch-based activated carbon containing boron (PBA). An energy distribution function based on FS isotherm containing five parameters suggest a unimodal distribution of binding sites for carbon PA, the binding site energies being distributed as exponential or unimodal, depending on the pressure, in the case of carbon PBA. The advantages of the proposed models are discussed.

High-surface-area carbon molecular sieves for selective CO(2) adsorption.

A series of carbon molecular sieves (CMSs) has been prepared, either as powders or monoliths, from petroleum pitch using potassium hydroxide as the activating agent. The CMS monoliths are prepared without the use of a binder based on the self-sintering ability of the mesophase pitch. Characterization results show that these CMSs combine a large apparent surface area (up to ca. 3100 m(2) g(-1)) together with a well-developed narrow microporosity (V(n) up to ca. 1.4 cm(3) g(-1)). The materials exhibit high adsorption capacities for CO(2) at 1 bar and 273 K (up to ca. 380 mg CO(2) g sorbent(-1)). To our knowledge, this is the best result obtained for CO(2) adsorption using carbon-based materials. Furthermore, although the CO(2) adsorption capacity for activated carbons has usually been considered lower than that of zeolites, the reported values exceed the total amount adsorbed on traditional 13X and 5A zeolites (ca. 230 mg and 180 mg CO(2) g sorbent(-1), respectively), under identical experimental conditions. Additionally, the narrow pore openings found in the CMS samples (ca. 0.4 nm) allows for the selective adsorption of CO(2) from molecules of similar dimensions (e.g., CH(4) and N(2)).