Carrier Transport Switching of Ferroelectric BTBT Derivative.

Alkylamide-substituted [1]benzothieno[3,2-b][1]benzothiophene (BTBT) derivative of BTBT-NHCOC14H29 (1), which has ferroelectric N-H···O= hydrogen-bonding network of alkylamide group and two-dimensional (2D) electric structure of BTBT π-cores, was prepared to design the external electric field-responsive organic semiconductors. The short-chain derivative of BTBT-NHCOC3H7 (1') revealed the coexistence of a 2D electronic band structure based on the herringbone BTBT arrangement and the one-dimensional (1D) hydrogen-bonding chain. 1 formed a smectic E (SmE) liquid crystal phase above 412 K and showed ferroelectric hysteresis in the electric field-polarization (P-E) curves at 403-433 K. The remanent polarization (Pr) and coercive electric field (Ec) of 1 at 408 K, 0.1 Hz were 24.0 µC cm-2 and 5.54 V µm-1, respectively. By thermal annealing of thin-film 1 at 443 K, the molecular assembly structure of 1 changed from a monolayer to a bilayer structure with high crystallinity, resulting in conducting layers of BTBT parallel to the substrate surface. The organic field-effect transistor (OFET) device with thermally annealed thin-film 1 showed p-type semiconducting behavior with the hole mobility of 1.0 × 10-3 cm2 V-1 s-1. Furthermore, device 1 showed switching behavior of semiconducting properties by electric field poling and thermal annealing cycle. The electric field response of ferroelectrics modulated the molecular orientation and conduction properties of organic semiconductors, resulting in external electric field control of carrier transport properties.

Combinatorial characterization of metastable luminous silver cations.

Thermodynamically metastable glasses that can contain metastable species are important functional materials. X-ray absorption near-edge structure (XANES) spectroscopy is an effective technique for determining the valence states of cations, especially for the doping element in phosphors. Herein, we first confirm the valence change of silver cations from monovalent to trivalent in aluminophosphate glasses by X-ray irradiation using a combination of Ag L3-edge XANES, electron spin resonance, and simulated XANES spectra based on first-principles calculations. The absorption edge of the experimental and simulated XANES spectra demonstrate the spectral features of Ag(III), confirming that AgO exists as Ag(I)Ag(III)O2. A part of Ag(I) changes to Ag(III) by X-ray irradiation, and the generation of Ag(III) is saturated after high irradiation doses, in good agreement with conventional radiophotoluminescence (RPL) behaviour. The structural modelling based on a combination of quantum beam analysis suggests that the local coordination of Ag cations is similar to that of Ag(III), which is confirmed by density functional theory calculations. This demonstration of Ag(III) in glass overturns the conventional understanding of the RPL mechanism of silver cations, redefining the science of silver-related materials.

Ferroelectric Organic Semiconductor: [1]Benzothieno[3,2-b][1]benzothiophene-Bearing Hydrogen-Bonding -CONHC14H29 Chain.

An alkylamide-substituted [1]benzothieno[3,2-b][1]benzothiophene (BTBT) derivative of BTBT-CONHC14H29 (1) and C8H17-BTBT-CONHC14H29 (2) were prepared to design the multifunctional organic materials, which can show both ferroelectric and semiconducting properties. Single-crystal X-ray structural analyses of short-chain (-CONHC3H7) derivatives revealed the coexistence of two-dimensional (2D) electronic band structures brought from a herringbone arrangement of the BTBT π core and the one-dimensional (1D) hydrogen-bonding chains of -CONHC3H7 chains. The thin films of 1 and 2 fabricated on the Si/SiO2 substrate surface have monolayer and bilayer structures, respectively, resulting in conducting layers parallel to the substrate surface, which is suitable for a channel layer of organic field-effect transistors (OFETs). The thin film of 1 indicated a hole mobility µFET = 2.4 × 10-5 cm2 V-1 s-1 and threshold voltage VTh = - 29 V, whereas that of 2 showed a µFET = 2.1 × 10-2 cm2 V-1 s-1 and threshold voltage VTh = -9.7 V. Both 1 and 2 formed the smectic E (SmE) phase above 410 and 369 K, respectively, where the existence of a hole transport pathway was confirmed in the SmE phase. The ferroelectric hysteresis behavior was observed in bulk 1 and 2 in the polarization-electric field (P-E) curves at the SmE phase. 1 showed the remanent polarization Pr = 2.3 µC cm-2 and coercive electric field Ec = 5.2 V µm-1, whereas the Pr and Ec of 2 were 3.4 µC cm-2 and 7.0 V µm-1 at the conditions of 453 K and 1 Hz. Introduction of alkylamide units into the BTBT π core has the potential to develop the external stimulus-responsive organic semiconductors brought from both ferroelectricity and semiconducting properties.

Unravelling the interfacial water structure at the photocatalyst strontium titanate by sum frequency generation spectroscopy.

The direct conversion of solar energy to hydrogen is considered as a possible method to produce carbon neutral hydrogen fuel. The mechanism of photocatalytic water splitting involves the chemical breakdown of water and re-assembly into hydrogen and oxygen at the interface of a photocatalyst. The selection rules of a suitable material are well established, but the fundamental understanding of the mechanisms, occurring at the interface between the catalyst and the water, remains missing. Using surface specific sum frequency generation spectroscopy, we present here characterisation of the interface between water and the photocatalyst strontium titanate (SrTiO3). We monitor the OH-stretching vibrations present at the interface. Their variations of intensities and frequencies as functions of isotopic dilution, pH and salt concentration provide information about the nature of the hydrogen bonding environment. We observe the presence of water molecules that flip their orientation at pH 5 indicating the point of zero charge of the SrTiO3 layer. These water molecules are oriented with their hydrogen away from the surface when the pH of the solutions is below 5 and pointing towards the surface when the pH is higher than 5. Besides, water molecules donating a H-bond to probably surface TiOH groups are observed at all pH.

Ionic Liquid Crystal Thin Film as Switching Layer in Nonvolatile Resistive Memory.

In this study, we propose the use of an ionic liquid crystal (ILC) as a new resistive switching layer in nonvolatile resistive random-access memory (ReRAM) devices. The high-quality vacuum-deposited ILC films of 1-hexadecyl-3-methylimidazolium hexafluorophosphate ([C16mim][PF6]) enabled to demonstrate the first operation of ReRAM devices with a low set voltage of ∼1 V and stable switching behavior for up to ∼44 cycles. The key to the successful operation is that the ILC layer is in the liquid crystal phase (smectic A), where the electric double layers formed at the electrode-ILC interfaces play a significant role. The results of basic electrical properties and I-V curve fittings suggested the following operation principle: the formation and rupture of charge-composed filaments within the ILC film, where the current conduction is primarily governed by the trap charge limited current (TCLC) mechanism. These achievements will pave the way for advanced studies of ILC-based electronic devices.

Reaction Dynamics of C(NH2)3SnI3 Formation from Vacuum-Deposited C(NH2)3I and SnI2 Bilayer Thin Films Investigated by In Situ Infrared Multiple-Angle Incidence-Resolved Spectroscopy.

Understanding the formation process of organic-inorganic halide perovskite (OIHP) thin films is important for the fabrication of high-quality thin films, which, in turn, are crucial for achieving high-performance devices. To address this challenge, we developed an in situ system of infrared multiple-angle incidence-resolved spectroscopy (IR-MAIRS) combined with a vacuum deposition system. "Orientation-free" isotropic spectra constructed from IR-MAIRS spectra enable us to perform quantitative analysis of the formation process of C(NH2)3SnI3 (GASnI3) thin films from unreacted C(NH2)3I (guanidine hydroiodide (GAI))/SnI2 bilayer structures predeposited in a vacuum. The analysis of the dependence of the GASnI3 formation rate on the reaction temperature using the Avrami model has revealed that a diffusion-controlled reaction process of GAI and SnI2 governs the formation kinetics. The present study points to the usefulness of in situ IR-MAIRS analysis in understanding the growth mechanisms of vacuum-deposited OIHP thin films and hence the potential to accelerate the development of vacuum processes for the fabrication of high-quality OIHP thin films.

Assessing fluid volume and determining outcomes of acute heart failure using plasma human atrial natriuretic peptide.

BACKGROUND: The post-dialysis plasma level of human atrial natriuretic peptide (hANP) reflects the fluid volume in patients on hemodialysis. The threshold hANP level is reportedly 100 pg/mL; however, the clinical usefulness of the threshold hANP level for volume control has not been sufficiently studied. METHODS: We conducted a single-center, retrospective, observational study that included 156 hemodialysis patients without atrial fibrillation. First, we examined the usefulness of the threshold hANP level (100 pg/mL) for predicting hypoxemia due to congestion in a short-term observational study from December 30, 2015 to January 5, 2016. Subsequently, we conducted a 5-year follow-up study wherein the outcomes were hospitalization due to acute heart failure (AHF), development of cardiovascular diseases (CVD), and all-cause death. Finally, we collected echocardiography data to investigate the relationship between cardiac function and hANP. RESULTS: Our short-term observational study showed that patients with an hANP level ≥ 100 pg/mL developed hypoxemia due to congestion (odds ratio, 3.52; 95% confidence interval, 1.06-11.71; P = 0.040). At the 5-year follow-up, patients with an hANP level ≥ 100 pg/mL had significantly higher rates of hospitalization due to AHF, CVD, and all-cause death based on the log-rank test (P = 0.003, P = 0.019, P < 0.001, respectively). Cardiac disfunctions were significantly associated with the high hANP level. CONCLUSIONS: The hANP level is indicative of both fluid volume and cardiac dysfunction. A threshold hANP level of 100 pg/mL can serve as a predictive marker for AHF and a practical indicator for volume control.

Conformational Change of Alkyl Chains at Phase Transitions in Thin Films of an Asymmetric Benzothienothiophene Derivative.

Among many promising organic semiconducting materials, 2-decyl-7-phenyl[1]benzothieno[3,2-b][1]benzothiophene (Ph-BTBT-C10) shows outstanding device performances for organic field-effect transistors. This compound has a highly ordered liquid crystalline state, i.e., the smectic E (SmE) phase. Although the transition from the crystalline state to the SmE phase is believed to accompany melting of the alkyl chains, no spectroscopic evidence has been found so far. In this study, the conformational change of the decyl chains in Ph-BTBT-C10 films across the phase transition is analyzed by temperature-dependent measurements in situ using infrared spectroscopy. The spectral analysis reveals that the polycrystalline film has latent conformational disorder (the gauche conformer), the rate of which becomes more pronounced with the heat treatment. As expected, melting of the decyl chains is observed above the transition temperature to the SmE phase. This study also highlights the discovery of some key bands sensitive to the phase transitions in liquid crystalline organic semiconductors.

Profiling of the microbiota of breast milk before and after feeding with an artificial nipple.

OBJECTIVES: Breast milk is a valuable and useful source of nutrition; however, surplus milk is routinely discarded for hygiene reasons despite an unclear scientific basis. Here, we profiled the microbiota of expressed breast milk before and after feeding with an artificial nipple and examined the bacterial survival in breast milk stored at 4 °C. METHODS: Eleven mother-baby pairs were included in the study. Samples of expressed breast milk were collected before and after feeding with an artificial nipple and examined both immediately (0 h) and after storage for 3 and 12 h at 4 °C. Each sample was inoculated onto a blood agar plate and incubated anaerobically and aerobically at 37 °C. Genomic DNA was extracted from individual bacterial colonies, which were identified by 16S rRNA gene sequencing. RESULTS: Before feeding, the bacterial counts at 0 and 12 h were (1.4 ± 1.6) × 105 colony-forming units (CFU)/mL and (1.4 ± 0.6) × 105 CFU/mL, respectively. Staphylococcus (47.7% and 41.9%, respectively), Cutibacterium (20.7% and 36.0%, respectively), and Streptococcus (16.1% and 6.6%, respectively) were identified among the samples. In contrast, after feeding, the bacterial counts at 0 and 12 h were (2.7 ± 1.7) × 105 CFU/mL and (2.1 ± 2.5) × 105 CFU/mL, respectively. Staphylococcus (30.1% and 37.4%, respectively), Cutibacterium (11.7% and 31.7%, respectively), and Streptococcus (41.5% and 25.2%, respectively), were identified among the samples. CONCLUSIONS: Bacteria were present in the breast milk before feeding. Although the main component of the microbiota shifted from Staphylococcus to Streptococcus species after feeding, these results suggest that surplus expressed breast milk may be preserved safely in a refrigerator for at least 12 h after feeding with an artificial nipple.

OsCERK2/OsRLK10, a homolog of OsCERK1, has a potential role for chitin-triggered immunity and arbuscular mycorrhizal symbiosis in rice.

In rice, the lysin motif (LysM) receptor-like kinase OsCERK1, originally identified as the essential molecule for chitin-triggered immunity, plays a key role in arbuscular mycorrhizal (AM) symbiosis. As we previously reported, although AM colonization was largely repressed at 2 weeks after inoculation (WAI), arbuscules were observed at 5 WAI in oscerk1 mutant. Conversely, most mutant plants that defect the common symbiosis signaling pathway exhibited no arbuscule formation. Concerning the reason for this characteristic phenotype of oscerk1, we speculated that OsRLK10, which is a putative paralog of OsCERK1, may have a redundant function in AM symbiosis. The protein sequences of these two genes are highly conserved and it is estimated that the gene duplication occurred 150 million years ago. Here we demonstrated that OsCERK2/OsRLK10 induced AM colonization and chitin-triggered reactive oxygen species production in oscerk1 knockout mutant as similar to OsCERK1. The oscerk2 mutant showed a slight but significant reduction of AM colonization at 5 WAI, indicating the contribution of OsCERK2 for AM symbiosis. However, the oscerk2;oscerk1 double-knockout mutant produced arbuscules at 5 WAI as similar to the oscerk1 mutant, indicating that the redundancy of OsCERK1 and OsCERK2 did not explain the mycorrhizal colonization in oscerk1 at 5 WAI. These results indicated that OsCERK2 has a potential to regulate both chitin-triggered immunity and AM symbiosis and at least partially contributes to AM symbiosis in rice though the contribution of OsCERK2 appears to be weaker than that of OsCERK1.

Microbiota profiles on the surface of non-woven fabric masks after wearing.

This study aimed to characterize commensal microbiota on the skin before and after wearing masks, and to characterize the microbiota on the surface of used masks after 1 week of drying. From the 13 human subjects (age range, 19-26 years), mean bacterial concentrations of (6.1 ± 11.0) × 105 and (1.0 ± 1.4) × 106 colony-forming units (CFU)/mL were recovered from the skin of the buccal areas wiped with a sterile cotton swab before and after wearing non-woven fabric masks for 8 h, respectively. Furthermore (3.4 ± 4.9) × 104 CFU/mL of bacteria were recovered from the mask surfaces. The bacteria contained in the masks, which consisted mainly of Cutibacterium acnes and Staphylococcus epidermidis/aureus, virtually disappeared after drying the masks indoors for 1 week.

Profiling of the microbiota in the remaining sports drink and orange juice in plastic bottles after direct drinking.

OBJECTIVES: The survival of bacteria in the sports drink and orange juice remaining in and at the mouth of bottles after direct drinking was examined after immediately drinking and incubation at 37 °C for 24 h. METHODS: Nine healthy participants were asked to drink approximately 100 mL of a plastic bottled sports drink or orange juice. The samples were cultured anaerobically at 37 °C for 7 days. Genomic DNA was extracted from the resulting individual colonies, and bacterial species were identified using 16 S rRNA gene sequencing. RESULTS: The mean amount of bacteria in the remaining sports drink and orange juice, immediately after drinking, were (1.6 ± 2.3) × 103 colony-forming units (CFU)/mL and (2.9 ± 3.3) × 103 CFU/mL, respectively. Additionally, bacteria recovered from the mouths of the sports drink and orange juice bottles were (2.5 ± 5.5) × 104 CFU/mL and (5.8 ± 2.4) × 103 CFU/mL, respectively. Oral bacteria, such as Streptococcus, Actinomyces, Neisseria, and Rothia were found to be transferred in the sports drink and orange juice, and the bacteria were scarcely detected after incubation at 37 °C for 24 h. CONCLUSIONS: The bacterial levels differed significantly from the previously reported levels in bottled tea 24 h after drinking, suggesting that remaining drinks with low pH levels can be preserved for a longer period.

Development of Measurement Tools for High-Throughput Experiments of Synchrotron Radiation XRD and XAFS on Powder Libraries.

We propose to minimize the sampling time for high-throughput measurements of powder X-ray diffraction (XRD) and X-ray absorption fine structure (XAFS) in synchrotron radiation. The conventional synchrotron radiation powder X-ray diffraction method requires filling of a capillary tube, but a structure-refining diffraction pattern could be obtained by transferring the crushed powder to a tape and rotating the cassette-tape tool by ±5° around the sample position. XAFS spectra could also be measured with the sample attached to the tape. The time required for sample preparation was greatly reduced, which made high-throughput experiments with powders in synchrotron radiation experiments more accessible.

High-Throughput and Autonomous Grazing Incidence X-ray Diffraction Mapping of Organic Combinatorial Thin-Film Library Driven by Machine Learning.

High-throughput X-ray diffraction (XRD) is one of the most indispensable techniques to accelerate materials research. However, the conventional XRD analysis with a large beam spot size may not best appropriate in a case for characterizing organic materials thin film libraries, in which various films prepared under different process conditions are integrated on a single substrate. Here, we demonstrate that high-resolution grazing incident XRD mapping analysis is useful for this purpose: A 2-dimensional organic combinatorial thin film library with the composition and growth temperature varied along the two orthogonal axes was successfully analyzed by using synchrotron microbeam X-ray. Moreover, we show that the time-consuming mapping process is accelerated with the aid of a machine learning technique termed as Bayesian optimization based on Gaussian process regression.

Arabidopsis cell culture for comparable physiological and genetic studies.

Cell cultures established from various plant species have been used for a range of physiological and biochemical studies. Homogeneity of cell types and size of clusters in the cell culture often gave a clearer and simpler results compared to those obtained with the whole plant. On the other hand, possible variability of physiological conditions and responsiveness to external stimuli between the cell lines could be problematic for comparative studies. Aiming at combining the usefulness of plant cell culture with the rich information and genetic resources of Arabidopsis, we systemically examined the methods/conditions to establish cell lines for comparative studies, which could be applicable to a variety of genetic resources. Arabidopsis cell lines thus established from the meristem of mature seeds showed reproducible and comparable MAMP responses such as ROS generation and defense-related gene expression. MAMP responses of the cultured cells showed the specificity depending on the presence/absence of the corresponding MAMP receptor. Pharmacological study with a protein kinase inhibitor, K252a, also showed the usefulness of the cell culture for such studies. These results indicated the usefulness of the method to establish Arabidopsis cell lines, which are useful for comparative studies between genetic resources.

Enhancement of intestinal absorption of coenzyme Q10 using emulsions containing oleyl polyethylene acetic acids.

Emulsions have often been prepared to improve absorption of lipophilic compounds that have poor solubility. Coenzyme Q10 (CoQ10) is a lipophilic compound that has been used as an anti-aging supplement. We focused on oleyl polyethyleneoxy acetic acid, an oxa acid derivative, to prepare emulsions of CoQ10 with the expectation of application to oral pharmaceutics. Oxa acids were purified and classified into four groups based on the average length of the ethylene oxide chain. The emulsion that were prepared using the four oxa acid groups were administered to rats and the plasma concentration profiles of CoQ10 were analyzed. The absorption of CoQ10 was improved in all emulsion groups compared with that in the powder group. The emulsion using oxa acid (n = 9.0) greatly increased the plasma concentration of CoQ10. Absorption was also improved by using emulsions containing larger percentage of oxa acids (6%, 15% and 23%) to compared with the same oxa acid (n = 9.0). The effects of oxa acids on cell viability were almost the same as those of conventional surfactants such as polyoxyethylene (20) sorbitan monooleate (Tween 80). The results showed that oxa acids are useful to prepare emulsions for oral administration and that the absorption of CoQ10 using oxa acids is significantly improved by using our formulations.

Ionic liquid/ZnO(0001[combining macron]) single crystal and epitaxial film interfaces studied through a combination of electrochemical measurements and a pulsed laser deposition process under vacuum.

O-Polar ZnO(0001[combining macron]) single crystals and ZnO and Mg-doped ZnO (MgZnO) films which were subsequently deposited on the ZnO crystals by a pulsed laser deposition (PLD) method were electrochemically investigated through the interfaces with ionic liquid (IL) in a vacuum. The sample surfaces were confirmed to be atomically clean and flat by reflection high energy electron diffraction (RHEED) observation, prior to their electrochemical measurements. Electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) were then performed, and the donor density, flat band potential of these ZnO samples, and the electric double layer capacitance at the IL/ZnO interfaces were successfully evaluated. The flat band potentials of ZnO and MgZnO films were found to shift to more negative potentials relative to those of the single crystal ZnO, with different values for thicker films, respectively. Some possible origins of the different flat band potentials between ZnO and MgZnO films, and their film thickness dependence of the flat band potential will be discussed in this paper.

Ionic Conductivity in Ionic Liquid Nano Thin Films.

Thin film approaches are powerful methods for gaining a nanoscale understanding of interfacial ionic liquids (ILs) in the vicinity of solids. These approaches are used to directly elucidate the interfacial contributions to the physical properties of ILs as nanoscale thin films have significant proportions of the surface or interface region with respect to their total volume. Here, we report the growth of a uniform [emim][TFSA] thin film ionic liquid on a chemically modified, well-wettable sapphire, thereby allowing the in situ measurement of its ionic conductivity on the nanoscale. We observed the thickness-dependent behavior of the ionic conductivity, which gradually decreased especially when the thickness was less than 10 nm, and found it to be quantitatively analyzed well by using an empirical two-layer model. The molecular dynamics (MD) simulations show that the thickness-dependent ionic conductivity originates from the solid-like structuring of the IL near the substrate, reproducing a thickness-dependent ionic conductivity. The MD simulation results suggest that the thickness of the low conductivity region determined in the two-layer model should roughly correspond to the thickness of the solid-like structuring of the IL near the substrate.

Electric-Field Induced Reversible Switching of the Magnetic Easy Axis in Co/BiFeO3 on SrTiO3.

Electric-field (E-field) control of magnetism enabled by multiferroic materials has the potential to revolutionize the landscape of present memory devices plagued with high energy dissipation. To date, this E-field controlled multiferroic scheme has only been demonstrated at room temperature using BiFeO3 films grown on DyScO3, a unique and expensive substrate, which gives rise to a particular ferroelectric domain pattern in BiFeO3. Here, we demonstrate reversible electric-field-induced switching of the magnetic state of the Co layer in Co/BiFeO3 (BFO) (001) thin film heterostructures fabricated on (001) SrTiO3 (STO) substrates. The angular dependence of the coercivity and the remanent magnetization of the Co layer indicates that its easy axis reversibly switches back and forth 45° between the (100) and the (110) crystallographic directions of STO as a result of alternating application of positive and negative voltage pulses between the patterned top Co electrode layer and the (001) SrRuO3 (SRO) layer on which the ferroelectric BFO is epitaxially grown. The coercivity (HC) of the Co layer exhibits a hysteretic behavior between two states as a function of voltage. A mechanism based on the intrinsic magnetoelectric coupling in multiferroic BFO involving projection of antiferromagnetic G-type domains is used to explain the observation. We have also measured the exact canting angle of the G-type domain in strained BFO films for the first time using neutron diffraction. These results suggest a pathway to integrating BFO-based devices on Si wafers for implementing low power consumption and nonvolatile magnetoelectronic devices.

Combinatorial Synthesis of Epitaxial LiCoO2 Thin Films on SrTiO3(001) via On-Substrate Sintering of Li2CO3 and CoO by Pulsed Laser Deposition.

High-quality single-phase epitaxial LiCoO2 thin films are synthesized on 0.5 wt % Nb-doped SrTiO3(001) substrates by nanoscale alternate deposition of Li2CO3 and CoO as Li and Co sources, respectively, using a combinatorial pulsed laser deposition (PLD) technique. The formation of LiCoO2 thin films from these two sources results from the sintering reaction between Li2CO3 and CoO, which is commonly used in a bulk ceramics process, but simultaneously takes place on the substrate during the deposition at a temperature of 550 °C. Electrochemical characterization reveals that the charge/discharge property of LiCoO2 thin films as a cathode is severely sensitive to the nominal Li:Co composition ratio. The best-quality film shows an excellent discharge capacity comparable with the characteristic capacity of LiCoO2.