Building trophic specializations that result in substantial niche partitioning within a young adaptive radiation.

Dietary partitioning often accompanies the increased morphological diversity seen during adaptive radiations within aquatic systems. While such niche partitioning would be expected in older radiations, it is unclear how significant morphological divergence occurs within a shorter time period. Here we show how differential growth in key elements of the feeding mechanism can bring about pronounced functional differences among closely related species. An incredibly young adaptive radiation of three Cyprinodon species residing within hypersaline lakes in San Salvador Island, Bahamas, has recently been described. Characterized by distinct head shapes, gut content analyses revealed three discrete feeding modes in these species: basal detritivory as well as derived durophagy and lepidophagy (scale-feeding). We dissected, cleared and stained, and micro-CT scanned species to assess functionally relevant differences in craniofacial musculoskeletal elements. The widespread feeding mode previously described for cyprinodontiforms, in which the force of the bite may be secondary to the requisite dexterity needed to pick at food items, is modified within both the scale specialist and the durophagous species. While the scale specialist has greatly emphasized maxillary retraction, using it to overcome the poor mechanical advantage associated with scale-eating, the durophage has instead stabilized the maxilla. In all species the bulk of the adductor musculature is composed of AM A1. However, the combined masses of both adductor mandibulae (AM) A1 and A3 in the scale specialist were five times that of the other species, showing the importance of growth in functional divergence. The scale specialist combines plesiomorphic jaw mechanisms with both a hypertrophied AM A1 and a slightly modified maxillary anatomy (with substantial functional implications) to generate a bite that is both strong and allows a wide range of motion in the upper jaw, two attributes that normally tradeoff mechanically. Thus, a significant feeding innovation (scale-eating, rarely seen in fishes) may evolve based largely on allometric changes in ancestral structures. Alternatively, the durophage shows reduced growth with foreshortened jaws that are stabilized by an immobile maxilla. Overall, scale specialists showed the most divergent morphology, suggesting that selection for scale-biting might be stronger or act on a greater number of traits than selection for either detritivory or durophagy. The scale specialist has colonized an adaptive peak that few lineages have climbed. Thus, heterochronic changes in growth can quickly produce functionally relevant change among closely related species.

Integrated Three-Dimensional Microanalysis Combining X-Ray Microtomography and X-Ray Fluorescence Methodologies.

A novel 3D elemental and morphological analysis approach is presented combining X-ray computed tomography (µCT), X-ray fluorescence (XRF) tomography, and confocal XRF analysis in a single laboratory instrument (Herakles). Each end station of Herakles (µCT, XRF-CT, and confocal XRF) represents the state-of-the-art of currently available laboratory techniques. The integration of these techniques enables linking the (quantitative) spatial distribution of chemical elements within the investigated materials to their three-dimensional (3D) internal morphology/structure down to 1-10 µm resolution level, which has not been achieved so-far using laboratory X-ray techniques. The concept of Herakles relies strongly on its high precision (around 100 nm) air-bearing motor system that connects the different end-stations, allowing combined measurements based on the above X-ray techniques while retaining the coordinate system. In-house developed control and analysis software further ensures a smooth integration of the techniques. Case studies on a Cu test pattern, a Daphnia magna model organism and a perlite biocatalyst support material demonstrate the attainable resolution, elemental sensitivity of the instrument, and the strength of combining these three complementary methodologies.

A pore-scale study of fracture dynamics in rock using X-ray micro-CT under ambient freeze-thaw cycling.

Freeze-thaw cycling stresses many environments which include porous media such as soil, rock and concrete. Climate change can expose new regions and subject others to a changing freeze-thaw frequency. Therefore, understanding and predicting the effect of freeze-thaw cycles is important in environmental science, the built environment and cultural heritage preservation. In this paper, we explore the possibilities of state-of-the-art micro-CT in studying the pore scale dynamics related to freezing and thawing. The experiments show the development of a fracture network in a porous limestone when cooling to -9.7 °C, at which an exothermal temperature peak is a proxy for ice crystallization. The dynamics of the fracture network are visualized with a time frame of 80 s. Theoretical assumptions predict that crystallization in these experiments occurs in pores of 6-20.1 nm under transient conditions. Here, the crystallization-induced stress exceeds rock strength when the local crystal fraction in the pores is 4.3%. The location of fractures is strongly related to preferential water uptake paths and rock texture, which are visually identified. Laboratory, continuous X-ray micro-CT scanning opens new perspectives for the pore-scale study of ice crystallization in porous media as well as for environmental processes related to freeze-thaw fracturing.

Inspiration from nature: dynamic modelling of the musculoskeletal structure of the seahorse tail.

Technological advances are often inspired by nature, considering that engineering is frequently faced by the same challenges as organisms in nature. One such interesting challenge is creating a structure that is at the same time stiff in a certain direction, yet flexible in another. The seahorse tail combines both radial stiffness and bending flexibility in a particularly elegant way: even though the tail is covered in a protective armour, it still shows sufficient flexibility to fully function as a prehensile organ. We therefore study the complex mechanics and dynamics of the musculoskeletal system of the seahorse tail from an engineering point of view. The seahorse tail derives its combination of flexibility and resilience from a chain of articulating skeletal segments. A versatile dynamic model of those segments was constructed, on the basis of automatic recognition of joint positions and muscle attachments. Both muscle structures that are thought to be responsible for ventral and ventral-lateral tail bending, namely the median ventral muscles and the hypaxial myomere muscles, were included in the model. Simulations on the model consist mainly of dynamic multi-body simulations. The results show that the sequential structure of uniformly shaped bony segments can remain flexible because of gliding joints that connect the corners of the segments. Radial stiffness on the other hand is obtained through the support that the central vertebra provides to the tail plating. Such insights could help in designing biomedical instruments that specifically require both high bending flexibility and radial stiffness (e.g. flexible stents and steerable catheters).

From vascular corrosion cast to electrical analog model for the study of human liver hemodynamics and perfusion.

Hypothermic machine perfusion (HMP) is experiencing a revival in organ preservation due to the limitations of static cold storage and the need for better preservation of expanded criteria donor organs. For livers, perfusion protocols are still poorly defined, and damage of sinusoidal endothelial cells and heterogeneous perfusion are concerns. In this study, an electrical model of the human liver blood circulation is developed to enlighten internal pressure and flow distributions during HMP. Detailed vascular data on two human livers, obtained by combining vascular corrosion casting, micro-CT-imaging and image processing, were used to set up the electrical model. Anatomical data could be measured up to 5--6 vessel generations in each tree and showed exponential trend lines, used to predict data for higher generations. Simulated flow and pressure were in accordance with literature data. The model was able to simulate effects of pressure-driven HMP on liver hemodynamics and reproduced observations such as flow competition between the hepatic artery and portal vein. Our simulations further indicate that, from a pure biomechanical (shear stress) standpoint, HMP with low pressures should not result in organ damage, and that fluid viscosity has no effect on the shear stress experienced by the liver microcirculation in pressure-driven HMP.

High-resolution proxies for wood density variations in Terminalia superba.

BACKGROUND AND AIMS: Density is a crucial variable in forest and wood science and is evaluated by a multitude of methods. Direct gravimetric methods are mostly destructive and time-consuming. Therefore, faster and semi- to non-destructive indirect methods have been developed. METHODS: Profiles of wood density variations with a resolution of approx. 50 µm were derived from one-dimensional resistance drillings, two-dimensional neutron scans, and three-dimensional neutron and X-ray scans. All methods were applied on Terminalia superba Engl. & Diels, an African pioneer species which sometimes exhibits a brown heart (limba noir). KEY RESULTS: The use of X-ray tomography combined with a reference material permitted direct estimates of wood density. These X-ray-derived densities overestimated gravimetrically determined densities non-significantly and showed high correlation (linear regression, R(2) = 0·995). When comparing X-ray densities with the attenuation coefficients of neutron scans and the amplitude of drilling resistance, a significant linear relation was found with the neutron attenuation coefficient (R(2) = 0·986) yet a weak relation with drilling resistance (R(2) = 0·243). When density patterns are compared, all three methods are capable of revealing the same trends. Differences are mainly due to the orientation of tree rings and the different characteristics of the indirect methods. CONCLUSIONS: High-resolution X-ray computed tomography is a promising technique for research on wood cores and will be explored further on other temperate and tropical species. Further study on limba noir is necessary to reveal the causes of density variations and to determine how resistance drillings can be further refined.

Development of injection moulded matrix tablets based on mixtures of ethylcellulose and low-substituted hydroxypropylcellulose.

The objective of this study was to produce sustained-release matrix tablets by means of injection moulding and to evaluate the influence of matrix composition, process temperature and viscosity grade of ethylcellulose on processability and drug release by means of a statistical design. The matrix tablets were physico-chemically characterized and the drug release mechanism and kinetics were studied. Formulations containing metoprolol tartrate (30%, model drug), ethylcellulose with dibutylsebacate (matrix former and plasticizer) and L-HPC were extruded and subsequently injection moulded into tablets (375mg, 10mm diameter, convex-shaped) at different temperatures (110, 120 and 130 degrees C). Dissolution tests were performed and tablets were characterized by means of DSC, X-ray powder diffraction studies, X-ray tomography, porosity and hardness. Tablets containing 30% metoprolol and 70% ethylcellulose (EC 4cps) showed an incomplete drug release within 24h (<50%). Formulations containing L-HPC and EC in a ratio of 20/50 and 27.5/42.5 resulted in nearly zero-order drug release, while the drug release rate was not constant when 35% L-HPC was included. Processing of these formulations was possible at all temperatures, but at higher processing temperatures the drug release rate decreased and tablet hardness increased. Higher viscosity grades of EC resulted in a faster drug release and a higher tablet hardness. The statistical design confirmed a significant influence of the EC and L-HPC concentration on drug release, while the processing temperature and EC viscosity grade did not affect drug release. Tablet porosity was low (<5%), independent of the formulation and process conditions. DSC and XRD demonstrated the formation of a solid dispersion. The hydration front in the tablets during dissolution was visualized by dynamic X-ray tomography, this technique also revealed an anisotropic pore structure through the tablet.

Automated generation of a finite element stent model.

Numerical simulations have proven to be a valuable tool to investigate the mechanical behavior of stents. These computer models require a considerable amount of preprocessing and computational effort and consequently there is a continuous need for accurate simplifications and automation. For example, it was recently shown that using beam elements instead of solid elements results in a significant speed up of stent simulations. However, the currently applied techniques to create a finite element mesh starting from stent samples remain time-consuming. We present a semi-automated strategy to obtain an accurate finite element beam mesh from a stent sample. The method consists of two steps: (1) A triangulated surface representation of the stent geometry is obtained from micro CT images. (2) Subsequently, a beam mesh is automatically generated by computing the centerline. The method is time-effective and results in an accurate 3D stent model as demonstrated for the MULTI-LINK Vision stent.

Micro-computed tomography of early lesions of osteochondrosis in the tarsus of foals.

INTRODUCTION: Osteochondrosis (OC) is an important developmental orthopedic disease of human and equine patients. The disease is defined as a focal disturbance in enchondral ossification. In horses, the disturbance can occur secondary to failure of the blood supply to growth cartilage. Diagnosis of the early, subclinical stages that can clarify the etiology is currently confined to cross-sectional histological examination. The potential for micro-computed tomography (micro-CT) with angiography to detect early lesions of OC has not yet been investigated. MATERIALS AND METHODS: Nine Standardbred foals bred from parents with OC of the tarso-crural joint were sacrificed at weekly intervals from birth to 7 weeks of age. Permanent barium angiograms were created within one hind limb post mortem, and samples collected from two predilection sites for OC within the tarso-crural joint of the perfused hind limb. The resulting 18 sample blocks were scanned with a custom-built micro-CT equipment set-up, and analyzed as 2D slices and 3D volume rendered models before sectioning for conventional histological examination. RESULTS: Histological examination identified eight early lesions in seven locations within six joints from the nine foals. Micro-CT with angiography was able to detect seven lesions in the same sites as histological examination. Lesions consisted of non-perfused foci within growth cartilage. No perfused vessels exited from subchondral bone deep to any lesion. Six of the seven lesions were associated with focal defects in the subchondral bone plate. Evidence of ongoing ossification was seen in three out of the seven lesions and included one separate center of ossification. CONCLUSION: Micro-CT was a useful technique for examination of early lesions of OC. The results of micro-CT were compatible with failure of cartilage canal vessels at the point where they cross the ossification front. Resultant areas of ischemic chondronecrosis were associated with focal delay in enchondral ossification as visualized in 3D volume rendered models. Micro-CT combined with histology clarified the role of different forms of ossification in the secondary repair responses to lesions.

Porous gelatin hydrogels: 1. Cryogenic formation and structure analysis.

In the present work, porous gelatin scaffolds were prepared by cryogenic treatment of a chemically cross-linked gelatin hydrogel, followed by removal of the ice crystals formed through lyophilization. This technique often leads to porous gels with a less porous skin. A simple method has been developed to solve this problem. The present study demonstrates that the hydrogel pore size decreased with an increasing gelatin concentration and with an increasing cooling rate of the gelatin hydrogel. Variation of the cryogenic parameters applied also enabled us to develop scaffolds with different pore morphologies (spherical versus transversal channel-like pores). In our opinion, this is the first paper in which temperature gradients during controlled cryogenic treatment were applied to induce a pore size gradient in gelatin hydrogels. With a newly designed cryo-unit, temperature gradients of 10 and 30 degrees C were implemented during the freezing step, resulting in scaffolds with average pore diameters of, respectively, +/-116 and +/-330 microm. In both cases, the porosity and pore size decreased gradually through the scaffolds. Pore size and structure analysis of the matrices was accomplished through a combination of microcomputed tomography using different software packages (microCTanalySIS and Octopus), scanning electron microscopy analysis, and helium pycnometry.