Modular mixing of benzene-1,3,5-tricarboxamide supramolecular hydrogelators allows tunable biomimetic hydrogels for control of cell aggregation in 3D.

Few synthetic hydrogels can mimic both the viscoelasticity and supramolecular fibrous structure found in the naturally occurring extracellular matrix (ECM). Furthermore, the ability to control the viscoelasticity of fibrous supramolecular hydrogel networks to influence cell culture remains a challenge. Here, we show that modular mixing of supramolecular architectures with slow and fast exchange dynamics can provide a suitable environment for multiple cell types and influence cellular aggregation. We employed modular mixing of two synthetic benzene-1,3,5-tricarboxamide (BTA) architectures: a small molecule water-soluble BTA with slow exchange dynamics and a telechelic polymeric BTA-PEG-BTA with fast exchange dynamics. Copolymerisation of these two supramolecular architectures was observed, and all tested formulations formed stable hydrogels in water and cell culture media. We found that rational tuning of mechanical and viscoelastic properties is possible by mixing BTA with BTA-PEG-BTA. These hydrogels showed high viability for both chondrocyte (ATDC5) and human dermal fibroblast (HDF) encapsulation (>80%) and supported neuronal outgrowth (PC12 and dorsal root ganglion, DRG). Furthermore, ATDC5s and human mesenchymal stem cells (hMSCs) were able to form spheroids within these viscoelastic hydrogels, with control over cell aggregation modulated by the dynamic properties of the material. Overall, this study shows that modular mixing of supramolecular architectures enables tunable fibrous hydrogels, creating a biomimetic environment for cell encapsulation. These materials are suitable for the formation and culture of spheroids in 3D, critical for upscaling tissue engineering approaches towards cell densities relevant for physiological tissues.

Competitive Supramolecular Associations Mediate the Viscoelasticity of Binary Hydrogels.

Supramolecular polymers are known to form strong and resilient hydrogels which can take up large amounts of water while exhibiting ease of processing and self-healing. They also possess similarities with networks of biological macromolecules. The combination of these features makes supramolecular polymers ideal candidates for studying mechanisms and consequences of self-assembly, which are relevant to biological materials. At the same time, this renders investigations of mixed hydrogels based on different supramolecular compounds necessary, since this substantially widens their applicability. Here, we address unusual viscoelastic properties of a class of binary hydrogels made by mixing fibrillar supramolecular polymers that are formed from two compounds: 1,3,5-benzene-tricarboxamide decorated with aliphatic chains terminated by tetra(ethylene glycol) (BTA) and a 20 kg/mol telechelic poly(ethylene glycol) decorated with the same hydrogen bonding BTA motif on both ends (BTA-PEG-BTA). Using a suite of experimental and simulation techniques, we find that the respective single-compound-based supramolecular systems form very different networks which exhibit drastically different rheology. More strikingly, mixing the compounds results in a non-monotonic dependence of modulus and viscosity on composition, suggesting a competition between interactions of the two compounds, which can then be used to fine-tune the mechanical properties. Simulations offer insight into the nature of this competition and their remarkable qualitative agreement with the experimental results is promising for the design of mixed hydrogels with desired and tunable properties. Their combination with a sensitive dynamic probe (here rheology) offer a powerful toolbox to explore the unique properties of binary hydrogel mixtures.

PEG Analogs Synthesized by Ring-Opening Metathesis Polymerization for Reversible Bioconjugation.

Poly(ethylene glycols) (PEGs) with protein-reactive end-groups are widely utilized in bioconjugation reactions. Herein, we describe the use of ring-opening metathesis polymerization (ROMP) to synthesize unsaturated protein-reactive PEG analogs. These ROMP PEGs (rPEGs) contained terminal aldehyde functionality and ranged in molecular weight from 6 to 20 kDa. The polymers were readily conjugated to free amines on the protein hen egg-white lysozyme (Lyz). Biocompatibility of the unsaturated PEGs was assessed in vitro, revealing the polymers to be nontoxic up to concentrations of at least 1 mg/mL in human dermal fibroblasts (HDFs). The resulting unsaturated rPEG-lysozyme conjugates underwent metathesis-based depolymerization, resulting in decreased molecular weight of the conjugate.

Polymorphism in Benzene-1,3,5-tricarboxamide Supramolecular Assemblies in Water: A Subtle Trade-off between Structure and Dynamics.

In biology, polymorphism is a well-known phenomenon by which a discrete biomacromolecule can adopt multiple specific conformations in response to its environment. The controlled incorporation of polymorphism into noncovalent aqueous assemblies of synthetic small molecules is an important step toward the development of bioinspired responsive materials. Herein, we report on a family of carboxylic acid functionalized water-soluble benzene-1,3,5-tricarboxamides (BTAs) that self-assemble in water to form one-dimensional fibers, membranes, and hollow nanotubes. Interestingly, one of the BTAs with the optimized position of the carboxylic group in the hydrophobic domain yields nanotubes that undergo reversible temperature-dependent dynamic reorganizations. SAXS and Cryo-TEM data show the formation of elongated, well-ordered nanotubes at elevated temperatures. At these temperatures, increased dynamics, as measured by hydrogen-deuterium exchange, provide enough flexibility to the system to form well-defined nanotube structures with apparently defect-free tube walls. Without this flexibility, the assemblies are frozen into a variety of structures that are very similar at the supramolecular level, but less defined at the mesoscopic level.

Dynamic diversity of synthetic supramolecular polymers in water as revealed by hydrogen/deuterium exchange.

Numerous self-assembling molecules have been synthesized aiming at mimicking both the structural and dynamic properties found in living systems. Here we show the application of hydrogen/deuterium exchange (HDX) mass spectrometry (MS) to unravel the nanoscale organization and the structural dynamics of synthetic supramolecular polymers in water. We select benzene-1,3,5-tricarboxamide (BTA) derivatives that self-assemble in H2O to illustrate the strength of this technique for supramolecular polymers. The BTA structure has six exchangeable hydrogen atoms and we follow their exchange as a function of time after diluting the H2O solution with a 100-fold excess of D2O. The kinetic H/D exchange profiles reveal that these supramolecular polymers in water are dynamically diverse; a notion that has previously not been observed using other techniques. In addition, we report that small changes in the molecular structure can be used to control the dynamics of synthetic supramolecular polymers in water.

Exposing Differences in Monomer Exchange Rates of Multicomponent Supramolecular Polymers in Water.

The formation of multicomponent and bioactive supramolecular polymers is a promising strategy for the formation of biomaterials that match the dynamic and responsive nature of biological systems. In order to fully realize the potential of this strategy, knowledge of the location and behavior of bioactive components within the system is crucial. By employing synthetic strategies to create multifunctional monomers, coupled with FRET and STORM techniques, we have investigated the formation and behavior of a bioactive and multicomponent supramolecular polymer. By creating a peptide-dye-monomer conjugate, we were able to measure high degrees of monomer incorporation and to visualize the equal distribution of monomers within the supramolecular polymer. Furthermore, by tracking the movement of monomers, we uncovered small differences in the dynamics of the bioactive monomers.

Dual pH- and Temperature-Responsive Protein Nanoparticles.

Multiply responsive protein nanoparticles are interesting for a variety of applications. Herein, we describe the synthesis of a vault nanoparticle that responds to both temperature and pH. Specifically, poly(N-isopropylacrylamide-co-acrylic acid) with a pyridyl disulfide end group was prepared by reversible addition-fragmentation chain transfer (RAFT) polymerization. The polymer had a lower critical solution temperature (LCST) of 31.9 °C at pH 5, 44.0 °C at pH 6 and above 60 °C at pH 7. The polymer was conjugated to human major vault protein (hMVP), and the resulting nanoparticle was analyzed by UV-Vis, dynamic light scattering (DLS) and electron microscopy. The data demonstrated that poly(N-isopropylacrylamide-co-acrylic acid)-vault conjugate did not respond to temperatures below 60 °C at pH 7, while the nanoparticles reversibly aggregated at pH 6. Furthermore, it was shown that the vault nanoparticle structure remained intact for at least three heat and cooling cycles. Thus, these dually responsive nanoparticles may serve as a platform for drug delivery and other applications.

Synthesis of Nanogel-Protein Conjugates.

The covalent conjugation of bovine serum albumin (BSA) to disulfide cross-linked polymeric nanogels is reported. Polymeric nanogel precursors were synthesized via a reversible addition-fragmentation chain transfer (RAFT) random copolymerization of poly(ethylene glycol) methyl ether methacrylate (PEGMA) and pyridyl disulfide methacrylate (PDSMA). Reaction of the p(PEGMA-co-PDSMA) with dithiothreitol resulted in the formation of nanogels. PDSMA serves as both a crosslinking agent and a reactive handle for the surface modification of the nanogels. Lipophilic dye, DiI, was sequestered within the nanogels by performing the crosslinking reaction in the presence of the hydrophobic molecule. Thiol-enriched BSA was conjugated to nanogels loaded with DiI via a disulfide reaction between the BSA and the surface exposed nanogel pyridyl disulfides. Conjugation was confirmed by fast protein liquid chromatography, dynamic light scattering, and agarose and polyacrylamide gel electrophoresis. We expect that this methodology is generally applicable to the preparation of nanogel-protein therapeutics.

Smart vaults: thermally-responsive protein nanocapsules.

Synthetic modification of a recombinant protein cage called a vault with stimuli-responsive smart polymers provides access to a new class of biohybrid materials; the polymer nanocapsules retain the structure of the protein cage and exhibit the responsive nature of the polymer. Vaults are naturally occurring ubiquitous ribonucleoprotein particles 41 × 41 × 72.5 nm composed of a protein shell enclosing multiple copies of two proteins and multiple copies of one or more small untranslated RNAs. Recombinant vaults are structurally identical but lack the vault content. Poly(N-isopropylacrylamide) (pNIPAAm), a polymer responsive to heat, was conjugated to recombinant vaults that were composed of ~78 copies of the major vault protein (MVP) modified to contain a cysteine rich region at the N-terminus (CP-MVP). The polymer was synthesized using reversible addition-fragmentation chain transfer (RAFT) polymerization to have a dansyl group at the alpha end and modified to have a thiol-reactive pyridyl disulfide at the omega end, which readily coupled to CP-MVP vaults. The resulting vault nanocapsules underwent reversible aggregation upon heating above the lower critical solution temperature (LCST) of the polymer as determined by electron microscopy (EM), dynamic light scattering experiments, and UV-vis turbidity analysis. The vault structure remained entirely intact throughout the phase transition; suggesting its use in a myriad of biomedical and biotechnology applications.

Aminooxy and Pyridyl Disulfide Telechelic Poly(Polyethylene Glycol Acrylate) by RAFT Polymerization.

An efficient method to synthesize telechelic, bio-reactive polymers is described. Homotelechelic polymers were synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization in one step by employing bifunctional chain transfer agents (CTAs). A bis-carboxylic acid CTA was coupled to N-BOC-aminooxy ethanol or pyridyl disulfide ethanol resulting in a bis-N-BOC-aminooxy CTA and a bis-pyridyl disulfide CTA, respectively. RAFT polymerization of polyethylene glycol (PEG) acrylate in the presence of both CTAs resulted in a series of polymers over a range of molecular weights (~8.4 kDa to 35.2 kDa; polydispersity indices, PDIs of 1.11 to 1.44) with retention of end-groups post-polymerization. The polymers were characterized by 1H NMR spectroscopy and gel permeation chromatography (GPC). Conjugations of small molecules and peptides resulted in homotelechelic polymer conjugates.

Synthesis of Michael Acceptor Ionomers of Poly(4-Sulfonated Styrene-co-Poly(Ethylene Glycol) Methyl Ether Acrylate).

Ionomers containing sodium 4-styrene sulfonate (4SS) and poly(ethylene glycol) methyl ether acrylate (PEGA) were synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization. The polymerization was mediated by 1-phenylethyl dithiobenzoate chain transfer agent in a dimethylformamide/water solvent system. Well-defined copolymers of pPEGA-co-4SS were produced with molecular weights ranging from 10 kDa to 40 kDa and polydispersity indices (PDIs) of 1.06-1.18 by gel permeation chromatography (GPC) against monodisperse poly(methyl methacrylate) (PMMA) standards. Post polymerization, the dithioester was reduced and trapped in situ with divinyl sulfone to produce a well-defined, semitelechelic pPEGA-co-4SS Michael acceptor polymer. UV-vis, infrared, and (1)H NMR spectroscopy confirmed that the integrity of the polymer backbone was maintained and that the vinyl sulfone was successfully incorporated at the chain end.

Trapping of Thiol Terminated Acrylate Polymers with Divinyl Sulfone to Generate Well-Defined Semi-Telechelic Michael Acceptor Polymers.

Herein we report the synthesis of vinyl sulfone end functionalized PEGylated polymers by reversible addition-fragmentation chain transfer (RAFT) polymerization for conjugation to proteins. Poly(ethylene glycol) methyl ether acrylate (PEGA) was polymerized in the presence of 1-phenylethyl dithiobenzoate with 2,2'-azobis(2-methylpropionitrile) as the initiator to generate well-defined polyPEGAs with number-average molecular weights (M(n)) by gel permeation chromatography (GPC) of 6.7 kDa, 11.8 kDa and 16.1 kDa. Post-polymerization, the majority of polymer chains contained the dithioester functional group at the omega chain end, and the polydispersity indexes (PDI) of the polymers ranged from 1.08 to 1.24. The dithioester was subsequently reduced via aminolysis, and the resulting thiol was trapped with a divinyl sulfone in situ to produce semi-telechelic, vinyl sulfone polyPEGAs with efficiencies ranging between 85% and 99%. It was determined that the retention of vinyl sulfone was directly related to reaction time, with the maximum dithioester being transformed into a vinyl sulfone within 30 minutes. Longer reaction times resulted in slow decomposition of the vinyl sulfone end group. The resulting semi-telechelic vinyl sulfone polymers were then conjugated to a protein containing a free cysteine, bovine serum albumin (BSA). Gel electrophoresis demonstrated that the reaction was highly efficient and that conjugates of increasing size were readily prepared. After polymer attachment, the activity of the BSA was 92% of the unmodified biomolecule.