RESUMO
The lignin valorization constitutes a chemical platform for several segments of chemical industry. The aim of this work was to evaluate the potential of acetosolv coconut fiber lignin (ACFL) as an additive to DGEBA, curing it using an aprotic IL ([BMIM][PF6]) and analyze the properties of the obtained thermosetting materials. ACFL was obtained by mixing coconut fiber with 90 % acetic acid and 2 % HCl at 110 °C during 1 h. ACFL was characterized by FTIR, TGA and 1H NMR. The formulations were fabricated by mixing DGEBA and ACFL at different concentrations (0-50 % wt.). The curing parameters and [BMIM][PF6] concentrations were optimized by DSC analyses. The cured ACFL-incorporated epoxy resins were characterized by gel content (GC), TGA, MCC and chemical resistance in different media. ACFL undergone a selective partial acetylation that favored its miscibility with DGEBA. High GC values were obtained at high curing temperatures and ACFL concentration. The crescent ACFL concentration did not affect the Tonset of the thermosetting materials significantly. ACFL has increased the resistance of DGEBA to combustion and different chemical media. ACFL has shown a great potential to be used as a bio-additive for enhancing the chemical, thermal and combustion properties of high-performance materials.
Assuntos
Líquidos Iônicos , Lignina , Lignina/química , Polimerização , Fenômenos Químicos , AlérgenosRESUMO
Lignin has been used on its crude or modified forms for adsorption purposes. This work evaluated the influence of selective pH precipitation of Kraft lignins (KLs) on their adsorptive performance for removing methylene blue (MB). The alkaline and acid KLs (KL A and KLB, respectively) were characterized by FTIR, 31P NMR, GPC and pHPZC analyses. The effects of biosorbent and adsorbate concentrations, pH, ionic strength, contact time and temperature on the MB adsorption were evaluated. The equilibrium, kinetic and thermodynamic parameters were calculated by Langmuir and Freundlich isotherms, pseudo-first and second order and Van't Hoff and Gibbs models, respectively. KL A and KL B presented peculiar structural features, mainly hydroxyls concentration and Mw values, which have influenced on the removal efficiency of MB and the adsorptive capacities of KL A (>80 %; ≥80 mg g-1) and KL B (>90 %; ≥20 mg g-1), respectively. The equilibrium, kinetic and thermodynamic parameters have shown that MB adsorption presented different mechanisms for each KL, but it only has driven by chemisorption for KL B. Therefore, KL A and KL B can be considered as potential novel biosorbents obtained through a clean, fast and simple route for textile wastewater treatment.
Assuntos
Azul de Metileno , Poluentes Químicos da Água , Adsorção , Concentração de Íons de Hidrogênio , Cinética , Lignina , Azul de Metileno/química , Termodinâmica , Poluentes Químicos da Água/químicaRESUMO
The optimization of the parameters involved in lignin extraction is crucial for obtaining a lignin with specific structural features for its further valorization. The aim of this work was to develop an eco-friendly organosolv protocol for tuning the acetylation degree of coconut shell lignins (CSLs) by using MgCl2 and HCl as catalyst and co-catalyst, respectively. CSLs were obtained by mixing coconut shell powder with 90% v/v acetic acid combined to no catalyst, 2% v/v HCl and 2% w/v MgCl2 (1, 2 and 3 h) and 2% w/v MgCl2 combined to 0.1, 0.25 and 0.5% v/v HCl (2 h) at 110 °C. CSLs were characterized by FTIR, 1H NMR, GPC and TGA. The effects of the acetylation degree were evaluated on their antioxidant activity (DPPH assay) and UV-blocking capacity in sunscreen formulations. The results have shown that the use of HCl as co-catalyst increased the lignin yield (from 21.4 to 48.8%) and the acetylation degree (from 0.81 to 1.58 mmol g-1), which positively affected thermal (200 < Tonset < 226 °C), antioxidant (46.6 < IC50 < 67.5 µg mL-1) and UV-blocking capacities of CSLs. It can be concluded that the design of the organosolv process was capable of generating lignins with peculiar functionalities and properties through an eco-friendly protocol.
Assuntos
Cocos , Lignina , Acetilação , Antioxidantes/química , Antioxidantes/farmacologia , Lignina/química , SolubilidadeRESUMO
To evaluate i) the inhibitory and bactericidal activity of cashew nut shell liquid (CNSL) and its isolated compounds (anacardic acid and cardol) against oral bacteria; ii) the biofilm formation inhibition, resin-dentin bond strength and physicochemical properties of a dental adhesive incorporated with these substances. The antibacterial effect of CNSL, anacardic acid, and cardol were assessed by determining the minimum inhibitory (MIC) and minimum bactericidal (MBC) concentrations. Effect in inhibiting biofilm formation of the adhesive incorporated with the substances (15 µg/ml) against a mixed-species biofilm of Streptococcus mutans and Candida Albicans and was determined by direct contact test. Additional Analysis included microtensile bond strength (µTBS) test, elastic modulus (EM), flexural strength (FS), degree of conversion (DC), water sorption (WS) and solubility (SL). The data were submitted to statistical analysis by one-way ANOVA and Tukey's test (p < 0.05). CNSL, anacardic acid and cardol showed antibacterial activity for all strains tested, with MIC and MBC values ranging from 3.12 to 25 µg/ml. There was no growth of colonies forming units in the adhesives incorporated with the substances. EM increased in the adhesive incorporated with anacardic acid, decreased after incorporation of cardol and it was not affected by incorporation of CNSL. The substances tested showed no effect in FS, DC, WS, SL and µTBS. In conclusion, the CNSL, anacardic acid and cardol showed antibacterial effects against oral bacteria and, the incorporation of substances did not reduce the performance of the adhesive.
Assuntos
Anacardium , Colagem Dentária , Anacardium/química , Antibacterianos/farmacologia , Cimentos Dentários/química , Dentina/química , Adesivos Dentinários/química , Teste de Materiais , Nozes/química , Cimentos de Resina/química , Cimentos de Resina/farmacologia , Streptococcus mutans , Resistência à TraçãoRESUMO
OBJECTIVE: The aim was to evaluate the antibacterial and antibiofilm activity of natural (n-CNSL) and technical (t-CNSL) cashew nut shell liquid against streptococci and enterococci related to dental caries and chronic apical periodontitis, respectively. MATERIAL AND METHODS: Minimum inhibitory concentrations (MIC) and minimal bactericidal concentration (MBC) were determined to assess the antimicrobial effect of both CNSLs (n-CSNL and t-CNSL) against S. oralis ATCC 10557, S. sobrinus ATCC 6715, S. parasanguinis ATCC 903, S. mutans UA 159 and E. faecalis ATCC 19433. The antibiofilm activity was evaluated by total biomass quantification, colony forming unit (CFU) counting and scanning electron microscopy (SEM). Furthermore, cytotoxic effect of the substances was evaluated on L929 and HaCat cell lines by MTS assay. RESULTS: The n-CNSL and t-CNSL showed inhibitory and bactericidal effect against all strains tested in this study, with MIC and MBC values ranging from 1.5 to 25 µg/mL. Overall, both CNSLs showed significant reduction in biomass quantification and enumeration of biofilm-entrapped cells for the strains analyzed, in biofilm formation and preformed biofilms (p < 0.05). In biofilm inhibition assay, the t-CNSL and n-CNSL showed reduction in biomass and CFU number for all bacteria, except in cell viability of S. parasanguinis treated with t-CNSL (p > 0.05). Indeed, SEM images showed a reduction in the amount of biomass, bacterial cells and changes in cellular morphology of S. mutans. CONCLUSION: In conclusion, both substances showed effective antibacterial and antibiofilm activity against the strains used in the study, except in viability of S. parasanguinis cells treated with t-CNSL.
Assuntos
Anacardium , Anti-Infecciosos , Cárie Dentária , Antibacterianos/farmacologia , Biofilmes , Testes de Sensibilidade Microbiana , Nozes , Streptococcus mutansRESUMO
The objective of this work was to obtain and characterize sodium alginate-based biopolymer films with the addition of cashew nut shell liquid (CNSL). The study employed a completely randomized design, including 0%, 0.5%, 1%, and 1.5% inclusion of CNSL. Uniform formation of the films was observed, and the addition of CNSL provided better thermal resistance than did the treatment without inclusion, while the addition of CNSL reduced the homogeneity of the microstructure, especially for the 1.5% inclusion level. The permeability of the film increased as the level of CNSL increased, especially in response to the concentrations of 1% and 1.5%, and no significant difference in permeability was observed between these treatments. The tensile strength decreased proportionally as a function of the addition of CNSL, as its inclusion increased the elasticity and elongation of the films. In addition, the films with CNSL demonstrated strong antioxidant activity and discrete antimicrobial activity, and ecotoxicity analysis showed that the levels of CNSL tested and the films produced were nontoxic. Thus, these films are promising and self-sustainable alternatives for the agrifood industry.
RESUMO
Maltodextrin (DE 20) and gelatin (4:1, w/w, respectively) were investigated as encapsulant materials for lemongrass (Cymbopogon citratus DC. Stapf) essential oil microencapsulation by freeze-drying. Three formulations were prepared: M1 (5% essential oil), M2 (10% essential oil), and M3 (15% essential oil), all in w/w. Microparticles were characterized by Fourier-transform infrared spectroscopy, scanning electron microscopy, water activity measurement, thermogravimetric and derivative thermogravimetric analysis, differential scanning calorimetry, and antioxidant activity analysis. Yield and microencapsulation efficiency were also determined. The results showed the promising potential of maltodextrin and gelatin as encapsulants and confirmed the feasibility of preparing C. citratus essential oil microparticles by freeze-drying. Microencapsulation improved the oil's thermal and oxidative stability, providing protection from volatilization and environmental conditions. Scanning electron microscopic examination of M1 revealed a closed, pore-free surface. M1 had higher yield and microencapsulation efficiency, showing great commercial potential for its reduced storage, transport, and distribution costs.
Assuntos
Antioxidantes/química , Cymbopogon/química , Microesferas , Óleos Voláteis/química , Liofilização , Gelatina/química , Polissacarídeos/químicaRESUMO
Cutaneous leishmaniasis (CL) is a neglected tropical disease (NTD), endemic mainly in low-income countries that lack adequate basic health care. The emergence of resistant parasites to pentavalent antimonials has led to the search for new treatments for CL. Photodynamic therapy (PDT) is a promising non-invasive and less toxic alternative for the treatment of CL. The present work describes the synthesis, characterization and photodynamic effect against CL of a new metalloporphyrin Pd (II) meso-tetra[4-(2-(3-n-pentadecylphenoxy)ethoxy]phenylporphyrin (PdP) derived from the cashew nut shell liquid (CNSL). The PdP complex presented a singlet oxygen quantum yield of 0.49, favoring a type II photochemical reaction. The results of the photodynamic experiment carried out with PdP on the promastigote forms of Leishmania braziliensis indicated a mortality percentage of 70 % of the cells when compared to the control after exposure to blue light (λ = 420 nm). Besides this, the metalloporphyrin PdP did not show considerable toxicity to macrophages, indicating the cell viability of the compound. Therefore, this metalloporphyrin derived from biomass represents an interesting alternative as a potential therapeutic drug for the treatment of CL through PDT, especially for patients with intolerance to the chemotherapeutic drugs currently available.
Assuntos
Anacardium , Leishmania braziliensis , Leishmaniose Cutânea , Fotoquimioterapia , Porfirinas , Humanos , Leishmaniose Cutânea/tratamento farmacológico , Nozes , Paládio/uso terapêutico , Fotoquimioterapia/métodos , Fármacos Fotossensibilizantes/farmacologia , Fármacos Fotossensibilizantes/uso terapêutico , Porfirinas/farmacologia , Porfirinas/uso terapêuticoRESUMO
Lignin acetylation, one of the most widespread chemical modifications used for improve the solubility of this biopolymer in organic solvents and increase polymer-lignin compatibility, has been performed for decades using time-consuming methodologies and acetylating agents with serious drawbacks. Moreover, traditional acetylation reactions generally conduce to non-selective acetylation of both aliphatic and phenolic groups. In this work, we demonstrated that partial and selective acetylation of kraft lignin can be carried out through a greener, simple and fast microwave-assisted process using acetic acid as solvent and acetylating agent. Structural characterization via FTIR, 1H-13C HSQC and 31P NMR demonstrated that acetylation reaction occurs selectively only in aliphatic hydroxyls, preserving the phenolic hydroxyls. Optimal reaction conditions were obtained using 1% (v/v) of H2SO4 as catalyst and only 5 min as reaction time. The acetylated Kraft lignin (AKL) obtained, have enhanced solubility in organic solvents (ethyl acetate, chloroform and dichloromethane) compared to unmodified Kraft lignin (KL) and antioxidant capacity almost 8 times higher than a commercial antioxidant BHT. These characteristics make the partially and selectively acetylated Kraft lignin a potential green antioxidant additive to be used in polymers blends.
Assuntos
Ácido Acético/química , Lignina/química , Acetilação , Antioxidantes/química , Catálise , Espectroscopia de Ressonância Magnética/métodos , Micro-Ondas , Polímeros/química , Solventes/química , Espectroscopia de Infravermelho com Transformada de Fourier/métodosRESUMO
This study evaluated maltodextrin (MD) and gelatin (GEL) in different ratios (SO1, MD only; SO2, MD and GELâ¯=â¯2:1; and SO3, MD and GELâ¯=â¯1:1, respectively) as wall materials to microencapsulation of sweet orange essential oil (SOEO, 10% w/w). SOEO microspheres were obtained by emulsification/lyophilization and characterized regarding the microencapsulation yield and efficiency, infrared spectroscopy, ultrastructural aspects (scanning electron microscopy, SEM), thermogravimetric (TG), derivative thermogravimetry (DTG) and differential exploratory calorimetry (DSC) and bioactive properties. Yield and SOEO microencapsulation efficiency (MEE) was of up to 90.19 and 75.75%, respectively. SEM analysis showed SO1, SO2 and SO3 microspheres with irregular shapes. Although improvements in thermal stability of all formulated microspheres were observed, TG and DTG curves indicated slower rates of volatilization and degradation of SOEO in SO1. DSC curves indicated that SO1, SO2 and SO3 microsphere formulations were effective in protecting SOEO, especially in relation to improvements in oxidative stability. Antibacterial and antioxidant properties, as well as total phenolic content of SOEO, were maintained in all formulated microspheres. SOEO microspheres can be prepared using MD and GEL and lyophilization, resulting in high yields, MEE, stability and preservation of antioxidant and antimicrobial properties.
Assuntos
Anti-Infecciosos/química , Antioxidantes/química , Citrus/química , Composição de Medicamentos , Gelatina/química , Óleos Voláteis/química , Polissacarídeos/química , Anti-Infecciosos/farmacologia , Antioxidantes/farmacologia , Antioxidantes/fisiologia , Liofilização , Análise Espectral , TermogravimetriaRESUMO
In this work, the meso-tetra[4-(2-(3-n-pentadecylphenoxy)ethoxy]phenylporphyrin (H2P), obtained from the cashew nut shell liquid (CNSL), and its zinc (ZnP) and copper (CuP) metallic complexes, were applied as emitting layers in organic light emitting diodes (OLEDs). These compounds were characterized via optical and electrochemical analysis and the electroluminescent properties of the device have been studied. We performed a cyclic voltammetry analysis to determine the Highest Occupied Molecular Orbital (HOMO) and Lowest Unoccupied Molecular Orbital (LUMO) energy levels for the porphyrins, in order to select the proper materials to assemble the device. H2P and ZnP presented fluorescence emission band in the red region, from 601 nm to 718 nm. Moreover, we verified that the introduction of bulky substituents hinders the πâ»π stacking, favoring the emission in the film. In addition, the strongest emitter, ZnP, presented a threshold voltage of 4 V and the maximum irradiance of 10 µW cm-2 with a current density (J) of 15 mA cm-2 at 10 V. The CuP complex showed to be a favorable material for the design of OLEDs in the infrared. These results suggest that the porphyrins derived from a renewable source, such as CNSL, is a promising material to be used in organic optoelectronic devices such as OLEDs.
RESUMO
Pressed palm oil mesocarp fibers (PPOMF) are by-products from oil palm industry and represents a potential source of lignocellulosic biomass. In order to add value to this agro-waste, dewaxed palm oil acetosolv lignin (DPOAL) was extracted under eco-friendly pulping method. The chemical composition and structural characteristics of DPOAL were investigated. The results showed elevated yield (48.5%) and high purity (94.3%), besides a moderate average molecular weight (1394â¯gâ¯mol-1) and narrow polydispersity index (1.88). Structural characterization via FT-IR, 1H13C HSQC and 31P NMR indicated that DPOAL was a typical HGS-type lignin. In addition, to increase the phenolic hydroxyl contents and improve DPOAL's antioxidant properties through a simple method, a fractionation process with methanol, ethanol and acetone was carried out, obtaining the methanol (MeOH-F), ethanol (EtOH-F) and acetone (ACT-F) soluble fractions. These were characterized by FT-IR, DSC, 1H13C HSQC and 31P NMR, which showed higher values of phenolic and aliphatic hydroxyls groups compared to DPOAL. The antioxidant activity was evaluated by the free radical scavenging activity of 2,2diphenyl1picrylhydrazyl radicals (DPPH·) and compared with commercial antioxidants, such as BHT and Irganox 1010. Interestingly, lignin samples had significantly lower IC50 values compared to commercial antioxidants, what suggests a great potential as novel natural antioxidant.
Assuntos
Antioxidantes/química , Antioxidantes/farmacologia , Lignina/química , Lignina/farmacologia , Óleo de Palmeira/química , Solventes/química , Concentração Inibidora 50RESUMO
Lignin is a high added-value product obtained from agrowastes through organosolv process to yield materials for technological applications. Here, coconut shell organosolv lignin was fractionated using green solvents (acetone and ethanol) and incorporated in poly(methyl methacrylate) (PMMA) films. The non-fractionated (WCSAL) and soluble fractions (ACT-F and EtOH-F) were completely characterized regarding their structures. The fractionation process altered lignins molecular weights, decreasing with the increased solvent polarity, although the higher polarity favored the dissolution of acylated and methoxylated fragments. PMMA films incorporated with lignin fractions were analyzed by TGA and DSC, which showed improved thermal and thermo-oxidative stabilities. DMA analyses of the films indicated that lignin soluble fractions had a plasticizer effect, while non-fractionated lignin increased PMMA films glass transition temperature (Tg). The antioxidant capacity of the films was also enhanced with the addition of lignins, in which those incorporated with soluble fractions showed the lowest IC50 values. The optical properties and photo-stability were also considerably improved, especially in the UVA and UVB regions. Therefore, solvent-fractionation represents a potential sustainable process to obtain lignins featuring different chemical structures, which can be applied effectively in the enhancement of PMMA films properties.
Assuntos
Antioxidantes/química , Antioxidantes/farmacologia , Cocos/genética , Lignina/química , Polimetil Metacrilato/química , Protetores contra Radiação/química , Protetores contra Radiação/farmacologia , Relação Dose-Resposta a Droga , Espectroscopia de Ressonância Magnética , Peso Molecular , Análise Espectral , Termogravimetria , Raios UltravioletaRESUMO
OBJECTIVE: The aim of this study was to synthesize, to characterize and to evaluate the effects on tubular occlusion of new monomer derived from cashew nut shell liquid (CNSL), also studying the effects of acid challenge (AC) on dentin surfaces treated with desensitizers. METHODS: The intermediary cardanol-epoxy (CNE) was synthesized through epoxidation of CNSL, followed by synthesis of cardanol-methacrylate-epoxy (CNME) through methacryloyl chloride esterification. Products were purified through chromatography column and characterized by Fourier transform infrared spectrometry and nuclear magnetic resonance. Resinous dentin desensitizers were formulated containing either unsaturated cardanol (CNU), CNE or CNME. Dentin disks were divided into seven groups: SL - Smear-layer, EDTA - EDTA-treated only, GLUMA - Gluma Desensitizer, OCB - One Coat Bond, CNU - CNU desensitizer, CNE - CNE desensitizer and CNME - CNME desensitizer. Dentinal fluid rate (DFF) was obtained using a Flodec equipment and tubular occlusion employing a scanning electron microscope (SEM), before and after AC. Data of DFF were submitted to two-way ANOVA and Tukey's test (p<0.05). RESULTS: GLUMA showed the lower reduction in DFF when compared to the other products, which were statistically similar. Even after AC, CNME presented the most homogenous and occluded surface, while CNE and CNU were partially removed, GLUMA was completely removed and OCB keep an occluded, but irregular surface. SIGNIFICANCE: CNME showed a great reduction of DFF and a homogenous occluded surface, suggesting that it may be a suitable and acid-resistant treatment option for dentine hypersensitivity.
Assuntos
Anacardium/química , Dessensibilizantes Dentinários/síntese química , Ácido Edético/química , Glutaral , Espectroscopia de Ressonância Magnética , Metacrilatos/química , Microscopia Eletrônica de Varredura , Permeabilidade , Fenóis/química , Cimentos de Resina/química , Camada de Esfregaço , Espectroscopia de Infravermelho com Transformada de Fourier , Propriedades de SuperfícieRESUMO
The aim of this work is to investigate and characterize the photo-ignition process of dry multi-walled carbon nanotubes (MWCNTs) mixed with ferrocene (FeCp2) powder, using an LED (light-emitting diode) as the light source, a combination that has never been used, to the best of our knowledge. The ignition process was improved by adding a lipophilic porphyrin (H2Pp) in powder to the MWCNTs/FeCp2 mixtures-thus, a lower ignition threshold was obtained. The ignition tests were carried out by employing a continuous emission and a pulsed white LED in two test campaigns. In the first, two MWCNT typologies, high purity (HP) and industrial grade (IG), were used without porphyrin, obtaining, for both, similar ignition thresholds. Furthermore, comparing ignition thresholds obtained with the LED source with those previously obtained with a Xenon (Xe) lamp, a significant reduction was observed. In the second test campaign, ignition tests were carried out by means of a properly driven and controlled pulsed XHP70 LED source. The minimum ignition energy (MIE) of IG-MWCNTs/FeCp2 samples was determined by varying the duration of the light pulse. Experimental results show that ignition is obtained with a pulse duration of 110 ms and a MIE density of 266 mJ/cm². The significant reduction of the MIE value (10-40%), observed when H2Pp in powder form was added to the MWCNTs/FeCp2 mixtures, was ascribed to the improved photoexcitation and charge transfer properties of the lipophilic porphyrin molecules.
RESUMO
This work describes the synthesis, characterization, and photocatalytic activity of new composite nanomaterials based on ZnO nanostructures impregnated by lipophlilic porphyrins derived from cashew nut shell liquid (CNSL). The obtained nanomaterials were characterized by X-ray diffraction (XRD), UV-Vis diffuse reflectance spectroscopy (DRS), Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), and steady-state photoluminescence spectra (PL). The results confirm nanostructures showing average diameter of 55 nm and an improved absorption in the visible region. Further, the FTIR analysis proved the existence of non-covalent interactions between the porphyrin molecules and ZnO. The photocatalytic activity of prepared photocatalysts was investigated by degradation of rhodamine B (RhB) in aqueous solution under visible light irradiation and natural sunlight. It was demonstrated that the photocatalytic activity increases in the presence of the porphyrins and, also, depends on the irradiation source. The development of composite photocatalysts based on porphyrins derived from CNSL provides an alternative approach to eliminate efficiently toxic wastes from water under ambient conditions.
RESUMO
Cardanol is a natural and renewable organic raw material obtained as the major chemical component by vacuum distillation of cashew nut shell liquid. In this work a new sustainable procedure for producing cardanol-based micellar nanodispersions having an embedded lipophilic porphyrin itself peripherally functionalized with cardanol substituents (porphyrin-cardanol hybrid) has been described for the first time. In particular, cardanol acts as the solvent of the cardanol hybrid porphyrin and cholesterol as well as being the main component of the nanodispersions. In this way a "green" micellar nanodispersion, in which a high percentage of the micellar system is derived from renewable "functional" molecules, has been produced.
Assuntos
Micelas , Fenóis/química , Porfirinas/química , Coloides/químicaRESUMO
Cardanol, a well known hazardous byproduct of the cashew industry, has been used as starting material for the synthesis of useful differently substituted "cardanol-based" porphyrins and their zinc(II), copper(II), cobalt(II) and Fe(III) complexes. Novel composites prepared by impregnation of polycrystalline TiO2 powder with an opportune amount of "cardanol-based" porphyrins, which act as sensitizers for the improvement of the photo-catalytic activity of the bare TiO2, have been used in the photodegradation in water of 4-nitrophenol (4-NP), which is a toxic and bio-refractory pollutant, dangerous for ecosystems and human health.
Assuntos
Fenóis/química , Porfirinas/química , Titânio/química , Catálise , Estrutura Molecular , Nitrofenóis/química , Fotoquímica , Água/químicaRESUMO
Patterns of the shifts in bridging cyanide-stretching frequencies have been examined in several fully saturated, &mgr;-cyano, bi- or trimetallic transition-metal donor-acceptor (D/A) complexes. An earlier (Watzky, M. A.; et al.Inorg. Chem. 1996, 35, 3463) inference that the bridging ligand nuclear and the D/A electronic coordinates are entangled is unequivocally demonstrated by the 32 cm(-)(l) lower frequency of nu(CN) for (NH(3))(5)Cr(CNRu(NH(3))(5))(4+) than for the cyanopentaamminechromium(III) parent. This contrasts to the 41 cm(-)(1) increase in nu(CN) upon ruthenation of (NH(3))(5)RhCN(2+). More complex behavior has been found for cis and trans trimetallic, donor-acceptor complexes. The symmetric combination of CN(-) stretching frequencies in trans-Cr(III)(MCL)(CNRu(II)(NH(3))(5))(2)(5+) complexes (MCL = a tetraazamacrocyclic ligand) shifts 100-140 cm(-)(1) to lower frequency, and the antisymmetric combination shifts less than about 30 cm(-)(1). This contrast in the shifts of the symmetric and the antisymmetric combinations of the CN stretches persists even in a trans complex with no center of symmetry. Two CN stretches have also been resolved in an analogous cis complex, and both shift to lower frequency by about 60 cm(-)(1). The net shift, summed over all the CN-stretching frequencies, is about the same for the bis-ruthenates of related dicyano complexes. A simple, symmetry-adapted perturbation theory treatment of the coupled vibrations is employed to deal with the opposing effects of the "kinematic" shifts (delta) of nu(CN) to higher frequency, expected in the absence of D/A coupling, and shifts ( f ) of nu(CN) to lower frequency that occur when D/A coupling is large. The Rh(III)- and Cr(III)-centered complexes correspond to different limits of this model: delta > f and delta < f, respectively. When referenced by means of this model to complexes with Rh(III) acceptors, the shifts in trimetallic complexes, summed over the symmetric and antisymmetric combinations of CN stretches, are about twice those of bimetallic complexes. Similarly referenced and summed over all bridging CN frequencies, the shifts of nu(CN) to lower energies are proportional to the oscillator strength of the electronic, donor-acceptor charge-transfer transition. The simplest interpretation of this correlation is that the donor-acceptor coupling in these systems is a function of the nuclear coordinates of the bridging ligand. This behavior of these complexes is semiquantitatively consistent with expectation for CN(-)-mediated vibronic (pseudo-Jahn-Teller) coupling of neighboring donors and acceptors, and the observed Ru(II)/CN(-) CT absorption parameters can be used in a simple, semiclassical vibronic model to predict shifts in nu(CN) that are in reasonable agreement with those observed.