Dedifferentiated Chondrocytes in Composite Microfibers As Tool for Cartilage Repair.

Tissue engineering (TE) approaches using biomaterials have gain important roles in the regeneration of cartilage. This paper describes the production by microfluidics of alginate-based microfibers containing both extracellular matrix (ECM)-derived biomaterials and chondrocytes. As ECM components gelatin or decellularized urinary bladder matrix (UBM) were investigated. The effectiveness of the composite microfibers has been tested to modulate the behavior and redifferentiation of dedifferentiated chondrocytes. The complete redifferentiation, at the single-cell level, of the chondrocytes, without cell aggregate formation, was observed after 14 days of cell culture. Specific chondrogenic markers and high cellular secretory activity was observed in embedded cells. Notably, no sign of collagen type 10 deposition was determined. The obtained data suggest that dedifferentiated chondrocytes regain a functional chondrocyte phenotype when embedded in appropriate 3D scaffold based on alginate plus gelatin or UBM. The proposed scaffolds are indeed valuable to form a cellular microenvironment mimicking the in vivo ECM, opening the way to their use in cartilage TE.

Composite ECM-alginate microfibers produced by microfluidics as scaffolds with biomineralization potential.

A novel approach to produce artificial bone composites (microfibers) with distinctive features mimicking natural tissue was investigated. Currently proposed inorganic materials (e.g. apatite matrixes) lack self-assembly and thereby limit interactions between cells and the material. The present work investigates the feasibility of creating "bio-inspired materials" specifically designed to overcome certain limitations inherent to current biomaterials. We examined the dimensions, morphology, and constitutive features of a composite hydrogel which combined an alginate based microfiber with a gelatin solution or a particulate form of urinary bladder matrix (UBM). The effectiveness of the composite microfibers to induce and modulate osteoblastic differentiation in three-dimensional (3D) scaffolds without altering the viability and morphological characteristics of the cells was investigated. The present study describes a novel alginate microfiber production method with the use of microfluidics. The microfluidic procedure allowed for precise tuning of microfibers which resulted in enhanced viability and function of embedded cells.

Delivery of suramin as an antiviral agent through liposomal systems.

Norovirus RNA-dependent RNA polymerase (RdRp) is a promising target enzyme for the development of new antiviral drugs. Starting from the crystal structure of norovirus RdRp, we had previously performed an in silico docking search using a library of low-molecular-weight compounds that enabled us to select molecules with predicted enzyme inhibitory activity. Among these, the polysulfonated naphthylurea suramin proved to inhibit in vitro both murine and human norovirus polymerases, with IC50 values in the low micromolar range. The negatively charged inhibitor, however, displayed poor cell permeability in cell-based experiments. Therefore, we produced different suramin-loaded liposome formulations and evaluated their activities in cell-based assays using murine norovirus cultivated in RAW 264.7 macrophages, as a model for norovirus genus. The results obtained show that suramin, when delivered through liposomes, can effectively inhibit murine norovirus replication.

Microfluidic and lab-on-a-chip preparation routes for organic nanoparticles and vesicular systems for nanomedicine applications.

In recent years, advancements in the fields of microfluidic and lab-on-a-chip technologies have provided unique opportunities for the implementation of nanomaterial production processes owing to the miniaturisation of the fluidic environment. It has been demonstrated that microfluidic reactors offer a range of advantages compared to conventional batch reactors, including improved controllability and uniformity of nanomaterial characteristics. In addition, the fast mixing achieved within microchannels, and the predictability of the laminar flow conditions, can be leveraged to investigate the nanomaterial formation dynamics. In this article recent developments in the field of microfluidic production of nanomaterials for drug delivery applications are reviewed. The features that make microfluidic reactors a suitable technological platform are discussed in terms of controllability of nanomaterials production. An overview of the various strategies developed for the production of organic nanoparticles and colloidal assemblies is presented, focusing on those nanomaterials that could have an impact on nanomedicine field such as drug nanoparticles, polymeric micelles, liposomes, polymersomes, polyplexes and hybrid nanoparticles. The effect of microfluidic environment on nanomaterials formation dynamics, as well as the use of microdevices as tools for nanomaterial investigation is also discussed.

Preparation of cell-encapsulation devices in confined microenvironment.

The entrapment of cells into hydrogel microdevice in form of microparticles or microfibers is one of the most appealing and useful tools for cell-based therapy and tissue engineering. Cell encapsulation procedures allow the immunoisolation of cells from the surrounding environment, after their transplantation and the maintenance of the normal cellular physiology. Factors affecting the efficacy of microdevices, which include size, size distribution, morphology, and porosity are all highly dependent on the method of preparation. In this respect, microfluidic based methods offer a promising strategy to fabricate highly uniform and morphologically controlled microdevices with tunable chemical and mechanical properties. In the current review, various cell microencapsulation procedures, based on a microfluidics, are critically analyzed with a special focus on the effect of the procedure on the morphology, viability and functions of the embedded cells. Moreover, a brief introduction about the optimal characteristics of microdevice intended for cell encapsulation, together with the currently used materials for the production is reported. A further challenging application of microfluidics for the development of "living microchip" is also presented. Finally, the limitations, challenging and future work on the microfluidic approach are also discussed.

Hydrogel blends with adjustable properties as patches for transdermal delivery.

The effect of different preparation parameters were analyzed with respect to the rheological and pharmaceutical characteristics of hydrogel blend patches, as transdermal delivery formulation. Mixtures of pectin and gelatin were employed for the production of patches, with adjustable properties, following a two-step gelation procedure. The first gelation, a thermal one, is trigged by the presence of gelatin, whereas, the second gelation, an ionic one, is due to the formation of the typical egg box structure of pectin. In particular, the patch structural properties were assessed by oscillation stress sweep measurements which provided information concerning their viscolelastic properties. In addition, different modalities for drug loading were analyzed with respect to drug homogeneous distribution; testosterone was employed as model drug for transdermal administration. Finally, the performances of the produced transdermal patches were studied, in term of reproducibility and reliability, by determination of in vitro drug release profiles.

Design, production and optimization of solid lipid microparticles (SLM) by a coaxial microfluidic device.

This paper describes a method for the production of lipid microparticles (SLM) based on microfluidics using a newly designed modular device constituted of three main parts: a temperature control, a co-flow dripping element and a congealing element. The presented data demonstrated that the microfluidic approach resulted in the production of SLM with narrow size distribution and optimal morphological characteristics in term of sphericity, surface smoothness and absence of defects (i.e. partial coalescence or irregular shape). The optimization of SLM production was performed by screening the effect of different experimental parameters and device configurations by a classical intuitive approach COST (Changing One Separate factor a Time). This process allowed selecting the proper value for a number of parameters including, (i) the congealing element geometry, (ii) the presence and concentration of a stabilizer, (iii) the temperature of water and oil phases and (iv) the water and oil flow rates. In addition, the interplay between oil phase and water phase flow rates, in controlling the size and morphology of SLM, was investigated by a statistical "Design of the Experiments" approach (DoE). The combined use of COST and DoE studies allowed the production of optimized SLM for the encapsulation of dye/drugs. The obtained results demonstrated that the guest molecules did not affect the general characteristics of SLM, confirming the robustness of the microfluidic procedure in view of the production of SLM for biopharmaceutical and biotech protocols.

Prolongation of skin allograft survival in rats by the transplantation of microencapsulated xenogeneic neonatal porcine Sertoli cells.

Skin rejection remains a major hurdle in skin reconstructive transplantation surgery. In fact, 85% of the grafted patients experience at least one episode of acute skin rejection in the first year. It has been observed that Sertoli cells (SC), when co-transplanted with allo- or xenogeneic cell/tissues, can induce graft acceptance in the absence of systemic immunosuppression. A method aimed at significantly prolonging skin allografts in rats transplanted with barium alginate-based microencapsulated xenogeneic porcine SC (SC-MCs) is described. Results demonstrated that intraperitoneal (IP) transplantation of SC-MCs with high cellular viability and function can significantly prolong allogeneic skin grafts when compared to transplantation controls receiving only empty alginate capsules (E-MCs). Lymphocytic infiltration at the skin graft site was not observed in 80% of the SC-MCs transplanted rats and these recipient animals showed a significant increased expression of T regulatory (Tregs) cells when compared to E-MCs transplantation controls. The findings of this report further substantiate the positive therapeutic effects of SC on transplantation technology mediated by Sertoli cell-induced alterations of the host's immune system and indicate new perspectives and new strategies for successful skin tissue allografts.

Mithramycin encapsulated in polymeric micelles by microfluidic technology as novel therapeutic protocol for beta-thalassemia.

This report shows that the DNA-binding drug, mithramycin, can be efficiently encapsulated in polymeric micelles (PM-MTH), based on Pluronic(®) block copolymers, by a new microfluidic approach. The effect of different production parameters has been investigated for their effect on PM-MTH characteristics. The compared analysis of PM-MTH produced by microfluidic and conventional bulk mixing procedures revealed that microfluidics provides a useful platform for the production of PM-MTH with improved controllability, reproducibility, smaller size, and polydispersity. Finally, an investigation of the effects of PM-MTH, produced by microfluidic and conventional bulk mixing procedures, on the erythroid differentiation of both human erythroleukemia and human erythroid precursor cells is reported. It is demonstrated that PM-MTH exhibited a slightly lower toxicity and more pronounced differentiative activity when compared to the free drug. In addition, PM-MTH were able to upregulate preferentially γ-globin messenger ribonucleic acid production and to increase fetal hemoglobin (HbF) accumulation, the percentage of HbF-containing cells, and their HbF content without stimulating α-globin gene expression, which is responsible for the clinical symptoms of ß-thalassemia. These results represent an important first step toward a potential clinical application, since an increase in HbF could alleviate the symptoms underlying ß-thalassemia and sickle cell anemia. In conclusion, this report suggests that PM-MTH produced by microfluidic approach warrants further evaluation as a potential therapeutic protocol for ß-thalassemia.

Human mesenchymal stem cells seeded on extracellular matrix-scaffold: viability and osteogenic potential.

The development and the optimization of novel culture systems of mesenchymal osteoprogenitors are some of the most important challenges in the field of bone tissue engineering (TE). A new combination between cells and extracellular matrix (ECM)-scaffold, containing ECM has here been analyzed. As source for osteoprogenitors, mesenchymal stem cells obtained from human umbilical cord Wharton's Jelly (hWJMSCs), were used. As ECM-scaffold, a powder form of isolated and purified porcine urinary bladder matrix (pUBM), was employed. The goals of the current work were: (1) the characterization of the in vitro hWJMSCs behavior, in terms of viability, proliferation, and adhesion to ECM-scaffold; (2) the effectiveness of ECM-scaffold to induce/modulate the osteoblastic differentiation; and (3) the proposal for a possible application of cells/ECM-scaffold construct to the field of cell/TE. In this respect, the properties of the pUBM-scaffold in promoting and guiding the in vitro adhesion, proliferation, and three-dimensional colonization of hWJMSCs, without altering viability and morphological characteristics of the cells, are here described. Finally, we have also demonstrated that pUBM-scaffolds positively affect the expression of typical osteoblastic markers in hWJMSCs.

Optimised production of multifunctional microfibres by microfluidic chip technology for tissue engineering applications.

This paper describes a method for the production of alginate microfibres using glass-based microfluidic chips fabricated by a photolithography-wet etching procedure. The main focus of the work is the fabrication of a cell containing multifunctional microfibres which have great potential for applications in drug release formulations and tissue engineering scaffolds (to guide the regeneration of tissues in predefined sizes and shapes) providing cell structural support and immunoisolation. The key parameters, which critically influence the formation of microfibres and their geometries, were identified by a classical intuitive approach COST (Changing One Separate factor a Time). In particular, their effects on the microfibre diameter were investigated, which are directly associated with their functionalities relating to the implantation site, the nutrient availability and diffusion/transport of oxygen, essential nutrients, growth factors, metabolic waste and secretory products. The interplay between the alginate solution concentration, pumping rate and gelling bath concentration in controlling the diameter of the produced microfibres was investigated with a statistical approach by means of a "design of the experiments" (DoEs) optimization and screening. Finally, the processing impacts on cell viability, the cellular effect of wall thickness consistency and the spatial distribution of cells within the alginate microfibre were examined. We provide an approach for the production of alginate microfibres with controlled shape and content, which could be further developed for scaling up and working towards FDA approval.

Encapsulation of eukaryotic cells in alginate microparticles: cell signaling by TNF-alpha through capsular structure of cystic fibrosis cells.

Entrapment of mammalian cells in natural or synthetic biomaterials represents an important tool for both basic and applied research in tissue engineering. For instance, the encapsulation procedures allow to physically isolate cells from the surrounding environment, after their transplantation maintaining the normal cellular physiology. The first part of the current paper describes different microencapsulation techniques including bulk emulsion technique, vibrating-nozzle procedure, gas driven mono-jet device protocol and microfluidic based approach. In the second part, the application of a microencapsulation procedure to the embedding of IB3-1 cells is also described. IB3-1 is a bronchial epithelial cell line, derived from a cystic fibrosis (CF) patient. Different experimental parameters of the encapsulation process were analyzed, including frequency and amplitude of vibration, polymer pumping rate and distance between the nozzle and the gelling bath. We have found that the microencapsulation procedure does not alter the viability of the encapsulated IB3-1 cells. The encapsulated IB3-1 cells were characterized in term of protein secretion, analysing the culture medium by Bio-Plex strategy. The analyzed factors include members of the interleukin family (IL-6), chemokines (IL-8 and MCP-1) and growth factors (G-CSF). The experiments demonstrated that most of the analyzed proteins, were secreted both by the free and encapsulated cells, even if in a different extent.

Production and characterization of engineered alginate-based microparticles containing ECM powder for cell/tissue engineering applications.

A method for the production of engineered alginate-based microparticles, containing extracellular matrix and neonatal porcine Sertoli cells (SCs), is described. As a source for extracellular matrix, a powder form of isolated and purified urinary bladder matrix (UBM) was employed. We demonstrated that the incorporation of UBM does not significantly alter the morphological and dimensional characteristics of the microparticles. The alginate microparticles were used for SC encapsulation as an immunoprotective barrier for transplant purposes, while the co-entrapped UBM promoted retention of cell viability and function. These engineered microparticles could represent a novel approach to enhancing immunological acceptance and increasing the functional life-span of the entrapped cells for cell/tissue engineering applications. In this respect, it is noteworthy that isolated neonatal porcine SCs, administered alone in highly biocompatible microparticles, led to diabetes prevention and reversion in nonobese diabetic (NOD) mice.

Acceleration of functional maturation and differentiation of neonatal porcine islet cell monolayers shortly in vitro cocultured with microencapsulated sertoli cells.

The limited availability of cadaveric human donor pancreata as well as the incomplete success of the Edmonton protocol for human islet allografts fasten search for new sources of insulin the producing cells for substitution cell therapy of insulin-dependent diabetes mellitus (T1DM). Starting from isolated neonatal porcine pancreatic islets (NPIs), we have obtained cell monolayers that were exposed to microencapsulated monolayered Sertoli cells (ESCs) for different time periods (7, 14, 21 days). To assess the development of the cocultured cell monolayers, we have studied either endocrine cell phenotype differentiation markers or c-kit, a hematopoietic stem cell marker, has recently been involved with growth and differentiation of ß-cell subpopulations in human as well as rodent animal models. ESC which were found to either accelerate maturation and differentiation of the NPIs ß-cell phenotype or identify an islet cell subpopulation that was marked positively for c-kit. The insulin/c-kit positive cells might represent a new, still unknown functionally immature ß-cell like element in the porcine pancreas. Acceleration of maturation and differentiation of our NPI cell monolayers might generate a potential new opportunity to develop insulin-producing cells that may suite experimental trials for cell therapy of T1DM.

Induction by TNF-α of IL-6 and IL-8 in cystic fibrosis bronchial IB3-1 epithelial cells encapsulated in alginate microbeads.

We have developed a microencapsulation procedure for the entrapment and manipulation of IB3-1 cystic fibrosis cells. The applied method is based on generation of monodisperse droplets by a vibrational nozzle. Different experimental parameters were analyzed, including frequency and amplitude of vibration, polymer pumping rate and distance between the nozzle and the gelling bath. We have found that the microencapsulation procedure does not alter the viability of the encapsulated IB3-1 cells. The encapsulated IB3-1 cells were characterized in term of secretomic profile, analyzing the culture medium by Bio-Plex strategy. The experiments demonstrated that most of the analyzed proteins, were secreted both by the free and encapsulated cells, even if in a different extent. In order to determine the biotechnological applications of this procedure, we determined whether encapsulated IB3-1 cells could be induced to pro-inflammatory responses, after treatment with TNF-α. In this experimental set-up, encapsulated and free IB3-1 cells were treated with TNF-α, thereafter the culture media from both cell populations were collected. As expected, TNF-α induced a sharp increase in the secretion of interleukins, chemokines and growth factors. Of great interest was the evidence that induction of interleukin-6 and interleukin-8 occurs also by encapsulated IB3-1 cells.

A statistical approach to optimize the spray drying of starch particles: application to dry powder coating.

This article describes the preparation of starch particles, by spray drying, for possible application to a dry powder coating process. Dry powder coating consists of spraying a fine powder and a plasticizer on particles. The efficiency of the coating is linked to the powder morphological and dimensional characteristics. Different experimental parameters of the spray-drying process were analyzed, including type of solvent, starch concentration, rate of polymer feeding, pressure of the atomizing air, drying air flow, and temperature of drying air. An optimization and screening of the experimental parameters by a design of the experiment (DOE) approach have been done. Finally, the produced spray-dried starch particles were conveniently tested in a dry coating process, in comparison to the commercial initial starch. The obtained results, in terms of coating efficiency, demonstrated that the spray-dried particles led to a sharp increase of coating efficiency value.

Encapsulation of mesenchymal stem cells from Wharton's jelly in alginate microbeads.

The description of a microencapsulation procedure for Wharton's jelly mesenchymal stem cells (WJMSCs) is reported. The applied method is based on the generation of monodisperse droplets by a vibrational nozzle. An ionic alginate encapsulation procedure was utilized for the microbeads hardening. Different experimental parameters were analyzed, including frequency and amplitude of vibration, polymer pumping rate, and distance between the nozzle and the gelling bath. The produced barium-alginate microbeads were characterized by excellent morphological characteristics as well as a very narrow size distribution. The microencapsulation procedure did not alter the morphology and viability of the encapsulated WJMSCs. In addition, the current paper reports the functional properties in terms of secretive profiles of both free and encapsulated WJMSCs. The analyzed factors were members of the family of interleukins, chemokines, growth factors, and soluble forms of adhesion molecules. These experiments showed that despite encapsulation, most of the proteins analyzed were secreted both by the free and encapsulated cells, even if in a different extent. In conclusion, the described encapsulation procedure represents a promising strategy to utilize WJMSCs for possible in vivo applications in tissue engineering and biomedicine.

Effect of the gelation process on the production of alginate microbeads by microfluidic chip technology.

The present paper reports the production of Ba-alginate microspheres by microfluidic chip technology. The general production strategy is based on the formation of an alginate multiphase flow by a 'Y' junction squeezing mechanism. Special emphasis is given to the relationship existing between the gelation process and the final morphological characteristics of the produced microbeads. A series of different gelation strategies, namely: 'external gelation', 'internal gelation' and 'partial gelation' were compared in terms of size, size distribution and morphology of the produced microbeads.

Rheological and functional characterization of new antiinflammatory delivery systems designed for buccal administration.

The aim of the present paper was to investigate the influence of different formulation parameters on the rheological and functional properties of emulgels (gelified emulsions), intended for the buccal administration of the antiinflammatory drug flurbiprofen. The influence of formulation parameters, such as (a) the amount of gelling polymeric emulsifier (Pemulen 1621 TR-1) used, (b) the oil to water ratio present in the O/W emulgel and finally (c) the pH of the formulation, was studied by a experimental design (DoE) approach. Formulations were analyzed in term of size and morphology of the internal semi-solid oil droplets as well as in term of rheological properties in the presence or in the absence of flurbiprofen by "shear stress vs. shear rate tests" and "frequency sweep tests". Emulgels were also characterized in vitro both by bioadhesion tests and release studies. In particular release studies demonstrated that flurbiprofen is released by the emulgels in a controlled manner, the drug release efficacy within the first 100min was comprised between 50 and 80% of the total amount of the drug. Finally, in vivo tests on healthy volunteers have demonstrated that emulgels were able to remain on buccal mucosa for an average period of 1h, moreover emulgels did not have bad taste and volunteers referred that were agreeable and pleasant.