RESUMO
Background. Vasopressin is frequently utilized for a variety of shock states in critically ill patients. Short stability (≤24 hours) after intravenous admixture with current manufacturer labeling requires just in time preparation and may lead to delays in therapy and increased medication waste. We aimed to evaluate vasopressin stability in 0.9% sodium chloride stored in polyvinyl chloride bags and polypropylene syringes for up to 90 days. Additionally, we evaluated the impact of extended stability on the time to administration and cost savings from reduced medical waste at an academic medical center. Methods. Dilutions of vasopressin to concentrations of 0.4 and 1.0 unit/mL were performed under aseptic conditions. The bags and syringes were stored at room temperature (23°C-25°C) or under refrigeration (3°C-5°C). Three samples of each preparation and storage environment were analyzed on days 0, 2, 14, 30, 45, 60, and 90. Physical stability was performed by visual examination. The pH was assessed at each point and upon final degradation evaluation. Sterility of the samples was not assessed. Chemical stability of vasopressin was evaluated using liquid chromatography with tandem mass spectrometry. Samples were considered stable if there was <10% degradation of the initial concentration. Results. Vasopressin diluted to 0.4 and 1.0 unit/mL with 0.9% sodium chloride injection was physically stable throughout the study. No precipitation was observed. At days 2, 14, 30, 45, 60, and 90 all bags and syringes diluted to 0.4 units/mL had <10% degradation. Vasopressin diluted to 1 unit/mL and stored under refrigeration had <10% degradation at all measured days, but when stored under room temperature was found to have >10% degradation at day 30. Implementation of a batching process resulted in reduced waste ($185 300) and improved time to administration (26 vs 4 minutes). Conclusion. Vasopressin diluted to a concentration of 0.4 units/mL with 0.9% sodium chloride injection is stable for 90 days at room temperature and under refrigeration. When diluted to 1.0 unit/mL with 0.9% sodium chloride injection it is stable for 90 days under refrigeration. Use of extended stability and sterility testing to batch prepare infusions may lead to improved time to administration and cost savings from reduced medication waste.