Mechanical Performance of Rotationally Molded Multilayer mLDPE/Banana-Fiber Composites.

The incorporation of materials different from the polymer within the rotational molding process usually results in lowered mechanical properties, where impact strength is of particular concern. In order to overcome this issue, multilayer structures of virgin polyethylene (PE) and banana fiber composites were prepared to determine the impact of the different layers on the performance of the final part. Cycle time has been studied to identify the influence of the addition of fibers in the process. The tensile, flexural and impact properties have been analyzed, finding improvements in Young's modulus of up to 13%, although at the expense of significant decreases in impact strength. A reduction in the fiber size due to the pulverization process was observed, which affected the rheological and mechanical behavior of the composite. The beneficial effects of working in multiple layers have been demonstrated in this work, where composites with up to 5% of banana fiber have been produced in two-layer structures. Finally, the need to add neat polyethylene in the external layer is also highlighted as a way to counteract the reductions in mechanical properties, particularly for flexural elastic modulus and tensile strength, and this also helps with the drop in impact behavior to a lower extent.

Recent Developments in Inorganic Composites in Rotational Molding.

Rotational molding allows for obtaining hollow parts with good aesthetics and properties, having as main drawbacks the lack of pressure and the long cycle times, which limit the range of materials. Different fillers have been introduced in rotomolding to obtain composite materials assessed. This review has shown that glass fibers or particles are the most common material among them, although carbon fibers or clays have also been studied. In general terms, 10% loadings provide an increase in mechanical properties; higher loadings usually lead to a decrease in processability or final properties. When the filler consists of a micro- or nano-material, such as clay or graphene, lower loadings are proposed, generally not exceeding 3%. The use of fillers of an inorganic nature to obtain composites has not been as explored as the incorporation of lignocellulosic materials and even less if referring to waste materials or side streams from industrial processes. So, there is a broad field for assessing the processing and properties of rotomolded composites containing inorganic waste materials, including the study of the relationship between the ratio of filler/reinforcement and the final properties and also their preprocessing (dry blending vs. melting compounding).

Undiagnosed Dementia Is Associated with Poor Physical Function in Older Adults.

BACKGROUND: Older adults with a cognitive impairment, including those not yet diagnosed, may have deficits in their physical function. OBJECTIVE: We sought to determine the associations of cognitive impairment consistent with dementia (CICD) diagnosis status on handgrip strength, gait speed, and functional disability in older adults. METHODS: The analytical sample included 8,383 adults aged ≥65-years without history of stroke, cancers, neurological conditions, or brain damage who participated in at least one-wave of the 2010-2016 waves of the Health and Retirement Study. A handgrip dynamometer measured handgrip strength. Men with handgrip strength <26 kg and women <16 kg were weak. Gait speed was timed across a 2.5-m course and those with slowness had gait speed <0.8 m/s. Participants with difficulty or an inability in completing any basic activities of daily living had a functional disability. The adapted Telephone Interview of Cognitive Status evaluated cognitive function. Persons with scores <7 had a CICD. Healthcare provider dementia-related diagnosis was self-reported. Undiagnosed CICD was defined as no reported dementia-related diagnosis but had CICD, while diagnosed CICD was classified as reporting a dementia-related diagnosis. Covariate-adjusted logistic models were used for the analyses. RESULTS: Persons with undiagnosed CICD had 1.37 (95% confidence interval (CI): 1.04-1.80) greater odds for weakness and 2.02 (CI: 1.39-2.94) greater odds for slow gait speed. Older adults with diagnosed CICD had 2.29 (CI: 1.32-3.97) greater odds for slowness and 1.85 (CI: 1.19-2.90) greater odds for functional disability. CONCLUSION: Screening for CICD could be recommended when defects in physical function are observed in older adults.

Isolation of brightness induction effects on target patches from adjacent surrounds and remote backgrounds.

The brightness (perceived intensity) of a region of visual space depends on its luminance and on the luminance of nearby regions. This phenomenon is called brightness induction and includes both brightness contrast and assimilation. Historically, and on a purely descriptive level, brightness contrast refers to a directional shift in target brightness away from the brightness of an adjacent region while assimilation refers to a brightness shift toward that of an adjacent region. In order to understand mechanisms, it is important to differentiate the descriptive terms contrast and assimilation from the optical and/or neural processes, often similarly named, which cause the effects. Experiment 1 isolated the effect on target patch (64 cd/m2) matching luminance (brightness) of six surround-ring widths (0.1°-24.5°) varied over 11 surround-ring luminances (32-96 cd/m2). Using the same observers, Experiment 2 examined the effect of the identical surround-ring parameters on target patch matching luminance in the presence of a dark (0.0 cd/m2) and a bright (96 cd/m2) remote background. By differencing the results of Experiment 1 (the isolated effect of the surround-ring) from those of Experiment 2 (the combined effect of the surround-ring with the dark and bright remote background) we further isolated the effect of the remote background. The results reveal that surround-rings and remote backgrounds produce brightness contrast effects in the target patch that are of the same or opposite polarity depending on the luminance polarity of these regions relative to target patch luminance. The strength of brightness contrast from the surround-ring varied with surround-ring luminance and width. Brightness contrast (darkening) in the target from the bright remote background was relatively constant in magnitude across all surround-ring luminances and increased in magnitude with decreasing surround-ring width. Brightness contrast (brightening) from the isolated dark remote background also increased in magnitude with decreasing surround-ring width: however, despite some regional flattening of the functions due to the fixed luminance of the dark remote background, induction magnitude was much reduced in the presence of a surround-ring of greater luminance than the target patch indicating a non-linear interaction between the dark remote background and surround-ring luminance.

Content-Adaptive Memory for Viewer-Aware Energy-Quality Scalable Mobile Video Systems.

Mobile devices are becoming ever more popular for streaming videos, which account for the majority of all data traffic on the internet. Memory is a critical component in mobile video processing systems, increasingly dominating power consumption. Today, memory designers are still focusing on hardware-level power optimization techniques, which usually come with significant implementation cost (e.g., silicon area overhead or performance penalty). In this paper, we propose a video content-aware memory technique for power-quality trade-off from viewer's perspectives. Based on the influence of video macroblock characteristics on the viewer's experience, we develop two simple and effective models - decision tree and logistic regression - to enable hardware adaptation. We have also implemented a novel viewer-aware bit-truncation technique which minimizes the impact on the viewer's experience, while introducing energy-quality adaptation to the video storage.

Recycling of polymeric fraction of cable waste by rotational moulding.

This study focuses on the mechanical recycling of polymeric waste that is produced in considerable amount from the cable industry. Every year large amounts of cables become waste; wires recycling has traditionally focused on metal recovery, while the polymer cover has just been considered as a residue, being landfilled or incinerated. Nowadays, increasingly restrictive regulations and concern about environment make necessary to reduce landfilling as much as possible. Main novelty of the study is that the material used in the research is a post-consumer material and the entire residual material is used, without a previous purification, in contrast with similar studies. Characterization of this residue was performed by thermal analysis, showing that the material is mainly made up of a heavy fraction (84% of the residue), which is not able to melt, fact what makes recycling more difficult. Once characterized, the material was ground, blended with virgin polyethylene and reprocessed by rotational moulding. The influence of the amount of residue and parts structure (1, 2 and 3 layers) was assessed, studying the mechanical behaviour of obtained parts (tensile, flexural and impact properties). It has been found that although mechanical properties get reduced with the increased amount of residue, up to a 35% of residue can be used without an important decrease in mechanical properties. On the other hand, the use of multiple layers in the mouldings allowed obtaining a better external appearance without compromising the mechanical properties.

Auditory capture of visual motion: effects on perception and discrimination.

We asked whether the perceived direction of visual motion and contrast thresholds for motion discrimination are influenced by the concurrent motion of an auditory sound source. Visual motion stimuli were counterphasing Gabor patches, whose net motion energy was manipulated by adjusting the contrast of the leftward-moving and rightward-moving components. The presentation of these visual stimuli was paired with the simultaneous presentation of auditory stimuli, whose apparent motion in 3D auditory space (rightward, leftward, static, no sound) was manipulated using interaural time and intensity differences, and Doppler cues. In experiment 1, observers judged whether the Gabor visual stimulus appeared to move rightward or leftward. In experiment 2, contrast discrimination thresholds for detecting the interval containing unequal (rightward or leftward) visual motion energy were obtained under the same auditory conditions. Experiment 1 showed that the perceived direction of ambiguous visual motion is powerfully influenced by concurrent auditory motion, such that auditory motion 'captured' ambiguous visual motion. Experiment 2 showed that this interaction occurs at a sensory stage of processing as visual contrast discrimination thresholds (a criterion-free measure of sensitivity) were significantly elevated when paired with congruent auditory motion. These results suggest that auditory and visual motion signals are integrated and combined into a supramodal (audiovisual) representation of motion.

Dissecting the influence of the collinear and flanking bars in White's effect.

In White's effect equiluminant test patches placed on the black and white bars of a square-wave grating appear different in brightness. The illusion has generated intense interest because the direction of the brightness effect does not correlate with the amount of black or white border in contact with the test patch, or in its general vicinity. Therefore, unlike brightness induction effects such as simultaneous contrast, White's effect is not consistent with explanations based on contrast or assimilation that depend solely on the relative amounts of black and white surrounding the test patches. We independently manipulated the luminance of the collinear and flanking bars to investigate their influence on test patch matching luminance (brightness). The inducing grating was a 0.5c/d square-wave and test patches measured 1.0° in width and either 0.5° or 3.0° in height. Test patches measuring 0.5° in height had more extensive contact with the collinear bars and test patches measuring 3.0° in height had more extensive contact with the flanking bars. The luminance of the collinear (or flanking) bars assumed twenty values from 3.2 to 124.8cd/m(2), while the luminance of the flanking (or collinear) bars remained white (124.8cd/m(2)) or black (3.2cd/m(2)). Under these conditions the influence of the collinear and flanking bars was found to be purely in the direction of contrast. The effect was dominated by contrast from the collinear bars (which results in White's effect), however, the influence of the flanking bars was also in the contrast direction. The data elucidate the luminance relationships between the collinear and flanking bars which produce the behavior associated with White's effect as well as that associated with "the inverted White effect" which is akin to simultaneous contrast.

The Oriented Difference of Gaussians (ODOG) model of brightness perception: Overview and executable Mathematica notebooks.

The Oriented Difference of Gaussians (ODOG) model of brightness (perceived intensity) by Blakeslee and McCourt (Vision Research 39:4361-4377, 1999), which is based on linear spatial filtering by oriented receptive fields followed by contrast normalization, has proven highly successful in parsimoniously predicting the perceived intensity (brightness) of regions in complex visual stimuli such as White's effect, which had been believed to defy filter-based explanations. Unlike competing explanations such as anchoring theory, filling-in, edge-integration, or layer decomposition, the spatial filtering approach embodied by the ODOG model readily accounts for the often overlooked but ubiquitous gradient structure of induction which, while most striking in grating induction, also occurs within the test fields of classical simultaneous brightness contrast and the White stimulus. Also, because the ODOG model does not require defined regions of interest, it is generalizable to any stimulus, including natural images. The ODOG model has motivated other researchers to develop modified versions (LODOG and FLODOG), and has served as an important counterweight and proof of concept to constrain high-level theories which rely on less well understood or justified mechanisms such as unconscious inference, transparency, perceptual grouping, and layer decomposition. Here we provide a brief but comprehensive description of the ODOG model as it has been implemented since 1999, as well as working Mathematica (Wolfram, Inc.) notebooks which users can employ to generate ODOG model predictions for their own stimuli.

Dissociation of perception and action in audiovisual multisensory integration.

The 'temporal rule' of multisensory integration (MI) proposes that unisensory stimuli, and the neuronal responses they evoke, must fall within a window of integration. Ecological validity demands that MI should occur only for physically simultaneous events (which may give rise to non-simultaneous neural activations), and spurious neural response simultaneities unrelated to environmental multisensory occurrences must somehow be rejected. Two experiments investigated the requirements of simultaneity for facilitative MI. Experiment 1 employed an reaction time (RT)/race model paradigm to measure audiovisual (AV) MI as a function of AV stimulus-onset asynchrony (SOA) under fully dark adapted conditions for visual stimuli that were either rod- or cone-isolating. Auditory stimulus intensity was constant. Despite a 155-ms delay in mean RT to the scotopic vs. photopic stimulus, facilitative AV MI in both conditions occurred exclusively at an AV SOA of 0 ms. Thus, facilitative MI demands both physical and physiological simultaneity. Experiment 2 investigated the accuracy of simultaneity and temporal order judgements under the same stimulus conditions. Judgements of AV stimulus simultaneity or temporal order were significantly influenced by stimulus intensity, indicating different simultaneity requirements for these tasks. The possibility was considered that there are mechanisms by which the nervous system may take account of variations in response latency arising from changes in stimulus intensity in order to selectively integrate only those physiological simultaneities that arise from physical simultaneities. It was proposed that separate subsystems for AV MI exist that pertain to action and perception.

What visual illusions tell us about underlying neural mechanisms and observer strategies for tackling the inverse problem of achromatic perception.

Research in lightness perception centers on understanding the prior assumptions and processing strategies the visual system uses to parse the retinal intensity distribution (the proximal stimulus) into the surface reflectance and illumination components of the scene (the distal stimulus-ground truth). It is agreed that the visual system must compare different regions of the visual image to solve this inverse problem; however, the nature of the comparisons and the mechanisms underlying them are topics of intense debate. Perceptual illusions are of value because they reveal important information about these visual processing mechanisms. We propose a framework for lightness research that resolves confusions and paradoxes in the literature, and provides insight into the mechanisms the visual system employs to tackle the inverse problem. The main idea is that much of the debate and confusion in the literature stems from the fact that lightness, defined as apparent reflectance, is underspecified and refers to three different types of judgments that are not comparable. Under stimulus conditions containing a visible illumination component, such as a shadow boundary, observers can distinguish and match three independent dimensions of achromatic experience: apparent intensity (brightness), apparent local intensity ratio (brightness-contrast), and apparent reflectance (lightness). In the absence of a visible illumination boundary, however, achromatic vision reduces to two dimensions and, depending on stimulus conditions and observer instructions, judgments of lightness are identical to judgments of brightness or brightness-contrast. Furthermore, because lightness judgments are based on different information under different conditions, they can differ greatly in their degree of difficulty and in their accuracy. This may, in part, explain the large variability in lightness constancy across studies.

Brightness induction and suprathreshold vision: effects of age and visual field.

A variety of visual capacities show significant age-related alterations. We assessed suprathreshold contrast and brightness perception across the lifespan in a large sample of healthy participants (N=155; 142) ranging in age from 16 to 80 years. Experiment 1 used a quadrature-phase motion cancelation technique (Blakeslee & McCourt, 2008) to measure canceling contrast (in central vision) for induced gratings at two temporal frequencies (1 Hz and 4 Hz) at two test field heights (0.5° or 2°×38.7°; 0.052 c/d). There was a significant age-related reduction in canceling contrast at 4 Hz, but not at 1 Hz. We find no age-related change in induction magnitude in the 1 Hz condition. We interpret the age-related decline in grating induction magnitude at 4 Hz to reflect a diminished capacity for inhibitory processing at higher temporal frequencies. In Experiment 2 participants adjusted the contrast of a matching grating (0.5° or 2°×38.7°; 0.052 c/d) to equal that of both real (30% contrast, 0.052 c/d) and induced (McCourt, 1982) standard gratings (100% inducing grating contrast; 0.052 c/d). Matching gratings appeared in the upper visual field (UVF) and test gratings appeared in the lower visual field (LVF), and vice versa, at eccentricities of ±7.5°. Average induction magnitude was invariant with age for both test field heights. There was a significant age-related reduction in perceived contrast of stimuli in the LVF versus UVF for both real and induced gratings.

Modeling lateral geniculate nucleus response with contrast gain control. Part 2: analysis.

Cope et al. [J. Opt. Soc. Am. A30, 2401 (2013)] proposed a class of models for lateral geniculate nucleus (LGN) ON-cell behavior consisting of a linear response with divisive normalization by local stimulus contrast. Here, we analyze a specific model with the linear response defined by a difference-of-Gaussians filter, and a circular Gaussian for the gain pool weighting function. For sinusoidal grating stimuli, the parameter region for bandpass behavior of the linear response is determined, and the gain control response is shown to act as a switch (changing from "off" to "on" with increasing spatial frequency). It is also shown that large gain pools stabilize the optimal spatial frequency of the total nonlinear response at a fixed value independent of contrast and stimulus magnitude. Under- and super-saturation, as well as contrast saturation, occur as typical effects of stimulus magnitude. For circular spot stimuli, it is shown that large gain pools stabilize the spot size that yields the maximum response.

Modeling lateral geniculate nucleus response with contrast gain control. Part 1: formulation.

A class of models for lateral geniculate nucleus (LGN) on-cell behavior is proposed. The models consist of a linear filter with divisive normalization by root mean square local contrast and include an intrinsic noise density parameter. The properties of these models are shown to match observed LGN behavior: (1) a linear response to low-magnitude stimuli; (2) a linear response without saturation (luxotonic behavior) for zero-contrast stimuli (homogeneous fields) with increasing magnitude; and (3) response saturation for nonzero contrast stimuli with increasing magnitude. The models possess an intrinsic scale for signal-to-noise ratio (SNR). The models show under and supersaturation, as well as saturation, for sinusoidal grating stimuli with increasing contrast and predict that different SNR regimes will cause a single neuron to show different contrast response curves. A companion paper [1] provides a detailed analysis of the full nonlinear response for sinusoidal grating stimuli and circular spot stimuli.

The roles of physical and physiological simultaneity in audiovisual multisensory facilitation.

A series of experiments measured the audiovisual stimulus onset asynchrony (SOAAV), yielding facilitative multisensory integration. We evaluated (1) the range of SOAAV over which facilitation occurred when unisensory stimuli were weak; (2) whether the range of SOAAV producing facilitation supported the hypothesis that physiological simultaneity of unisensory activity governs multisensory facilitation; and (3) whether AV multisensory facilitation depended on relative stimulus intensity. We compared response-time distributions to unisensory auditory (A) and visual (V) stimuli with those to AV stimuli over a wide range (300 and 20 ms increments) of SOAAV, across four conditions of varying stimulus intensity. In condition 1, the intensity of unisensory stimuli was adjusted such that d' ≈ 2. In condition 2, V stimulus intensity was increased (d' > 4), while A stimulus intensity was as in condition 1. In condition 3, A stimulus intensity was increased (d' > 4) while V stimulus intensity was as in condition 1. In condition 4, both A and V stimulus intensities were increased to clearly suprathreshold levels (d' > 4). Across all conditions of stimulus intensity, significant multisensory facilitation occurred exclusively for simultaneously presented A and V stimuli. In addition, facilitation increased as stimulus intensity increased, in disagreement with inverse effectiveness. These results indicate that the requirements for facilitative multisensory integration include both physical and physiological simultaneity.

Analysis of multidimensional difference-of-Gaussians filters in terms of directly observable parameters.

The difference-of-Gaussians (DOG) filter is a widely used model for the receptive field of neurons in the retina and lateral geniculate nucleus (LGN) and is a potential model in general for responses modulated by an excitatory center with an inhibitory surrounding region. A DOG filter is defined by three standard parameters: the center and surround sigmas (which define the variance of the radially symmetric Gaussians) and the balance (which defines the linear combination of the two Gaussians). These parameters are not directly observable and are typically determined by nonlinear parameter estimation methods applied to the frequency response function. DOG filters show both low-pass (optimal response at zero frequency) and bandpass (optimal response at a nonzero frequency) behavior. This paper reformulates the DOG filter in terms of a directly observable parameter, the zero-crossing radius, and two new (but not directly observable) parameters. In the two-dimensional parameter space, the exact region corresponding to bandpass behavior is determined. A detailed description of the frequency response characteristics of the DOG filter is obtained. It is also found that the directly observable optimal frequency and optimal gain (the ratio of the response at optimal frequency to the response at zero frequency) provide an alternate coordinate system for the bandpass region. Altogether, the DOG filter and its three standard implicit parameters can be determined by three directly observable values. The two-dimensional bandpass region is a potential tool for the analysis of populations of DOG filters (for example, populations of neurons in the retina or LGN), because the clustering of points in this parameter space may indicate an underlying organizational principle. This paper concentrates on circular Gaussians, but the results generalize to multidimensional radially symmetric Gaussians and are given as an appendix.

Lighting direction and visual field modulate perceived intensity of illumination.

When interpreting object shape from shading the visual system exhibits a strong bias that illumination comes from above and slightly from the left. We asked whether such biases in the perceived direction of illumination might also influence its perceived intensity. Arrays of nine cubes were stereoscopically rendered where individual cubes varied in their 3D pose, but possessed identical triplets of visible faces. Arrays were virtually illuminated from one of four directions: Above-Left, Above-Right, Below-Left, and Below-Right (±24.4° azimuth; ±90° elevation). Illumination intensity possessed 15 levels, resulting in mean cube array luminances ranging from 1.31-3.45 cd/m(2). A "reference" array was consistently illuminated from Above-Left at mid-intensity (mean array luminance = 2.38 cd/m(2)). The reference array's illumination was compared to that of matching arrays which were illuminated from all four directions at all intensities. Reference and matching arrays appeared in the left and right visual field, respectively, or vice versa. Subjects judged which cube array appeared to be under more intense illumination. Using the method of constant stimuli we determined the illumination level of matching arrays required to establish subjective equality with the reference array as a function of matching cube visual field, illumination elevation, and illumination azimuth. Cube arrays appeared significantly more intensely illuminated when they were situated in the left visual field (p = 0.017), and when they were illuminated from below (p = 0.001), and from the left (p = 0.001). An interaction of modest strength was that the effect of illumination azimuth was greater for matching arrays situated in the left visual field (p = 0.042). We propose that objects lit from below appear more intensely illuminated than identical objects lit from above due to long-term adaptation to downward lighting. The amplification of perceived intensity of illumination for stimuli situated in the left visual field and lit from the left is best explained by tonic egocentric and allocentric leftward attentional biases, respectively.

Atypical category processing and hemispheric asymmetries in high-functioning children with autism: revealed through high-density EEG mapping.

Behavioral evidence for an impaired ability to group objects based on similar physical or semantic properties in autism spectrum disorders (ASD) has been mixed. Here, we recorded brain activity from high-functioning children with ASD as they completed a visual-target detection task. We then assessed the extent to which object-based selective attention automatically generalized from targets to non-target exemplars from the same well-known object class (e.g., dogs). Our results provide clear electrophysiological evidence that children with ASD (N=17, aged 8-13 years) process the similarity between targets (e.g., a specific dog) and same-category non-targets (SCNT) (e.g., another dog) to a lesser extent than do their typically developing (TD) peers (N=21). A closer examination of the data revealed striking hemispheric asymmetries that were specific to the ASD group. These findings align with mounting evidence in the autism literature of anatomic underconnectivity between the cerebral hemispheres. Years of research in individuals with TD have demonstrated that the left hemisphere (LH) is specialized toward processing local (or featural) stimulus properties and the right hemisphere (RH) toward processing global (or configural) stimulus properties. We therefore propose a model where a lack of communication between the hemispheres in ASD, combined with typical hemispheric specialization, is a root cause for impaired categorization and the oft-observed bias to process local over global stimulus properties.