Projected urban growth in the southeastern USA puts small streams at risk.

Future land-use development has the potential to profoundly affect the health of aquatic ecosystems in the coming decades. We developed regression models predicting the loss of sensitive fish (R2 = 0.39) and macroinvertebrate (R2 = 0.64) taxa as a function of urban and agricultural land uses and applied them to projected urbanization of the rapidly urbanizing Piedmont ecoregion of the southeastern USA for 2030 and 2060. The regression models are based on a 2014 investigation of water quality and ecology of 75 wadeable streams across the region. Based on these projections, stream kilometers experiencing >50% loss of sensitive fish and invertebrate taxa will nearly quadruple to 19,500 and 38,950 km by 2060 (16 and 32% of small stream kilometers in the region), respectively. Uncertainty was assessed using the 20 and 80% probability of urbanization for the land-use projection model and using the 95% confidence intervals for the regression models. Adverse effects on stream health were linked to elevated concentrations of contaminants and nutrients, low dissolved oxygen, and streamflow alteration, all associated with urbanization. The results of this analysis provide a warning of potential risks from future urbanization and perhaps some guidance on how those risks might be mitigated.

Fabrication of Graphene-Polyimide Nanocomposites with Superior Electrical Conductivity.

We report on the fabrication of a novel class of lightweight materials, polyimide-graphene nanocomposites (0.01-5 vol %), with tunable electrical conductivity. The graphene-polyimide nanocomposites exhibit an ultra-low graphene percolation threshold of 0.03 vol % and maximum dc conductivity of 0.94 S/cm, which we attribute to excellent dispersion, extraordinary electron transport in the well-dispersed graphene, high number density of graphene nanosheets, and the π-π interactions between the aromatic moieties of the polyimide and the carbon rings in graphene. The dc conductivity data are shown to follow the power-law dependence on the graphene volume fraction near the percolation threshold. The ac conductivity of the nanocomposites is accurately represented by the extended pair-approximation model. The exponent s of the approximation is estimated to be 0.45-0.61, indicating anomalous diffusion of charge particles and a fractal structure for the conducting phase, lending support to the percolation model. Low-temperature dc conductivity of the nanocomposites is well-approximated by the thermal fluctuation-induced tunneling. Wide-angle X-ray scattering and transmission electron microscopy were utilized to correlate the morphology with the electrical conductivity. The lack of maxima in X-ray indicates the loss of structural registry and short-range ordering.

Trade-off between the Mechanical Strength and Microwave Electrical Properties of Functionalized and Irradiated Carbon Nanotube Sheets.

Carbon nanotube (CNT) sheets represent a novel implementation of CNTs that enable the tailoring of electrical and mechanical properties for applications in the automotive and aerospace industries. Small molecule functionalization and postprocessing techniques, such as irradiation with high-energy particles, are methods that can enhance the mechanical properties of CNTs. However, the effect that these modifications have on the electrical conduction mechanisms has not been extensively explored. By characterizing the mechanical and electrical properties of multiwalled carbon nanotube (MWCNT) sheets with different functional groups and irradiation doses, we can expand our insights into the extent of the trade-off that exists between mechanical strength and electrical conductivity for commercially available CNT sheets. Such insights allow for the optimization of design pathways for engineering applications that require a balance of material property enhancements.

Toward the Responsible Development and Commercialization of Sensor Nanotechnologies.

Nanotechnology-enabled sensors (or nanosensors) will play an important role in enabling the progression toward ubiquitous information systems as the Internet of Things (IoT) emerges. Nanosensors offer new, miniaturized solutions in physiochemical and biological sensing that enable increased sensitivity, specificity, and multiplexing capability, all with the compelling economic drivers of low cost and high-energy efficiency. In the United States, Federal agencies participating in the National Nanotechnology Initiative (NNI) "Nanotechnology for Sensors and Sensors for Nanotechnology: Improving and Protecting Health, Safety, and the Environment" Nanotechnology Signature Initiative (the Sensors NSI), address both the opportunity of using nanotechnology to advance sensor development and the challenges of developing sensors to keep pace with the increasingly widespread use of engineered nanomaterials. This perspective article will introduce and provide background on the NNI signature initiative on sensors. Recent efforts by the Sensors NSI aimed at promoting the successful development and commercialization of nanosensors will be reviewed and examples of sensor nanotechnologies will be highlighted. Future directions and critical challenges for sensor development will also be discussed.

Self-Healing of Core-Shell Magnetic Polystyrene Nanocomposites.

High heat generation is reported in core-shell magnetic nanoparticle polystyrene (PS) nanocomposites (3.5, 10 wt %) when they are placed in a high-frequency ac magnetic field. These magnetic nanoparticles with cobalt iron oxide core and manganese iron oxide shell were synthesized and characterized by wide-angle X-ray scattering (WAX), thermal gravimetric analysis (TGA), transmission electron microscopy (TEM), and ac field gradient magnetometery. When placed in a high-frequency ac magnetic field, the thermal energy generated in the magnetic polystyrene nanocomposites resulted in a surface temperature increase. The heat generation is attributed to the contribution of Néel relaxation and hysteresis of the core-shell magnetic nanoparticles in the solid state. The maximum surface temperature increased with increasing nanoparticle content and resulted in melting of the magnetic polystyrene nanocomposite.

Carbon nanotube epoxy nanocomposites: the effects of interfacial modifications on the dynamic mechanical properties of the nanocomposites.

Surface functionalization of pretreated carbon nanotubes (CNT) using aromatic, aliphatic, and aliphatic ether diamines was performed. The pretreatment of the CNT consisted of either acid- or photo-oxidation. The acid treated CNT had a higher initial oxygen content compared to the photo-oxidized CNT and this resulted in a higher density of functionalization. X-ray photoelectron spectroscopy (XPS) and thermal gravimetric analysis (TGA) were used to verify the presence of the oxygenated and amine moieties on the CNT surfaces. Epoxy/0.1 wt % CNT nanocomposites were prepared using the functionalized CNT and the bulk properties of the nanocomposites were examined. Macroscale correlations between the interfacial modification and bulk dynamic mechanical and thermal properties were observed. The amine modified epoxy/CNT nanocomposites exhibited up to a 1.9-fold improvement in storage modulus (G') below the glass transition (Tg) and up to an almost 4-fold increase above the Tg. They also exhibited a 3-10 °C increase in the glass transition temperature. The aromatic diamine surface modified epoxy/CNT nanocomposites resulted in the largest increase in shear moduli below and above the Tg and the largest increase in the Tg. Surface examination of the nanocomposites with scanning electron microscopy (SEM) revealed indications of a greater adhesion of the epoxy resin matrix to the CNT, most likely due to the covalent bonding.

Increased tensile strength of carbon nanotube yarns and sheets through chemical modification and electron beam irradiation.

The inherent strength of individual carbon nanotubes (CNTs) offers considerable opportunity for the development of advanced, lightweight composite structures. Recent work in the fabrication and application of CNT forms such as yarns and sheets has addressed early nanocomposite limitations with respect to nanotube dispersion and loading and has pushed the technology toward structural composite applications. However, the high tensile strength of an individual CNT has not directly translated into that of sheets and yarns, where the bulk material strength is limited by intertube electrostatic attractions and slippage. The focus of this work was to assess postprocessing of CNT sheets and yarns to improve the macro-scale strength of these material forms. Both small-molecule functionalization and electron-beam irradiation were evaluated as means to enhance the tensile strength and Young's modulus of the bulk CNT materials. Mechanical testing revealed a 57% increase in tensile strength of CNT sheets upon functionalization compared with unfunctionalized sheets, while an additional 48% increase in tensile strength was observed when functionalized sheets were irradiated. Similarly, small-molecule functionalization increased tensile strength of yarn by up to 25%, whereas irradiation of the functionalized yarns pushed the tensile strength to 88% beyond that of the baseline yarn.

Graphene polyimide nanocomposites; thermal, mechanical, and high-temperature shape memory effects.

Flexible graphene polyimide nanocomposites (0.1-4 wt %) with superior mechanical properties over those of neat polyimide resin have been prepared by solution blending. Imide moieties were grafted to amine-functionalized graphene using a step-by-step condensation and thermal imidization method. The imide-functionalized graphene exhibited excellent compatibility with N-methyl-2-pyrrolidone. The dynamic storage moduli of the graphene polyimide nanocomposites increased linearly with increasing graphene content for both unmodified graphene and imidized graphene. Moduli of the imidized graphene nanocomposites were 25-30% higher than those of unmodified graphene nanocomposites. Both neat polyimide and polyimide nanocomposites exhibited shape memory effects with a triggering temperature of 230 °C. where addition of graphene improved the recovery rate. Addition of graphene improved thermal stability of the polyimide nanocomposites for both graphene and modified graphene.

Transparent large-strain thermoplastic polyurethane magnetoactive nanocomposites.

Organically modified superparamagnetic MnFe(2)O(4)/thermoplastic polyurethane elastomer (TPU) nanocomposites (0.1-8 wt %) were prepared by solvent mixing followed by solution casting. Linear aliphatic alkyl chain modification of spherical MnFe(2)O(4) provided compatibility with the TPU containing a butanediol extended polyester polyol-MDI. All MnFe(2)O(4)/TPU nanocomposite films were superparamagnetic and their saturation magnetization, σ(s), increased with increasing MnFe(2)O(4) content. All nanocomposite films exhibited large deformations (>10 mm) under a magneto-static field. This is the first report of large actuation of magnetic nanoparticle nanocomposites at low-loading levels of 0.1 wt % (0.025 vol %). The maximum actuation deformation of the MnFe(2)O(4)/TPU nanocomposite films increased exponentially with increasing nanoparticle concentration. An empirical correlation between the maximum displacement, saturation magnetization, and magnetic nanoparticle loading is proposed. The cyclic deformation actuation of a 6 wt % surface modified MnFe(2)O(4)/TPU, in a low magnetic field 151 < B(y) < 303 Oe, exhibited excellent reproducibility and controllability. MnFe(2)O(4)/TPU nanocomposite films (0.1-2 wt %) were transparent and semitransparent over the wavelengths from 350 to 700 nm.

Synthesis, optical characterization, and electrochemical properties of isomeric tetraphenylbenzodifurans containing electron acceptor groups.

Isomeric tetraphenylbenzodifuran systems, benzo[1,2-b:5,4]difuran and benzo[1,2-b:4,5]difuran, containing electron acceptor groups (CF(3), CN, and NO(2)) have been synthesized and studied. Their electronic absorption, fluorescence, two-photon absorption cross sections, and electrochemical properties were investigated. The absorption and emission maxima are red-shifted for the linear-conjugated systems in comparison with the corresponding isomer. Dual fluorescence was observed and the existence of a twisted intramolecular charge transfer state was confirmed by low-temperature emission experiments. Wide HOMO-LUMO energy gaps were obtained ranging from 2.53 to 3.28 eV. HOMO levels were found in the energy range of -6.03 to -6.63 eV while LUMO are within -2.55 to -3.52 eV.

Using the dynamic bond to access macroscopically responsive structurally dynamic polymers.

New materials that have the ability to reversibly adapt to their environment and possess a wide range of responses ranging from self-healing to mechanical work are continually emerging. These adaptive systems have the potential to revolutionize technologies such as sensors and actuators, as well as numerous biomedical applications. We will describe the emergence of a new trend in the design of adaptive materials that involves the use of reversible chemistry (both non-covalent and covalent) to programme a response that originates at the most fundamental (molecular) level. Materials that make use of this approach - structurally dynamic polymers - produce macroscopic responses from a change in the material's molecular architecture (that is, the rearrangement or reorganization of the polymer components, or polymeric aggregates). This design approach requires careful selection of the reversible/dynamic bond used in the construction of the material to control its environmental responsiveness.

Reinforced thermoplastic polyimide with dispersed functionalized single wall carbon nanotubes.

Molecular pi-complexes were formed from pristine HiPCO single- wall carbon nanotubes (SWCNTs) and 1-pyrene- N-(4-N'-(5-norbornene-2,3-dicarboxyimido)phenyl butanamide, 1. Polyimide films were prepared with these complexes as well as uncomplexed SWCNTs and the effects of nanoadditive addition on mechanical, thermal, and electrical properties of these films were evaluated. Although these properties were enhanced by both nanoadditives, larger increases in tensile strength and thermal and electrical conductivities were obtained when the SWCNT/1 complexes were used. At a loading level of 5.5 wt %, the T(g) of the polyimide increased from 169 to 197 degrees C and the storage modulus increased 20-fold (from 142 to 3045 MPa). The addition of 3.5 wt % SWCNT/1 complexes increased the tensile strength of the polyimide from 61.4 to 129 MPa; higher loading levels led to embrittlement and lower tensile strengths. The electrical conductivities (DC surface) of the polyimides increased to 1 x 10(-4) Scm(-1) (SWCNT/1 complexes loading level of 9 wt %). Details of the preparation of these complexes and their effects on polyimide film properties are discussed.

Predicting the biological condition of streams: use of geospatial indicators of natural and anthropogenic characteristics of watersheds.

We developed and evaluated empirical models to predict biological condition of wadeable streams in a large portion of the eastern USA, with the ultimate goal of prediction for unsampled basins. Previous work had classified (i.e., altered vs. unaltered) the biological condition of 920 streams based on a biological assessment of macroinvertebrate assemblages. Predictor variables were limited to widely available geospatial data, which included land cover, topography, climate, soils, societal infrastructure, and potential hydrologic modification. We compared the accuracy of predictions of biological condition class based on models with continuous and binary responses. We also evaluated the relative importance of specific groups and individual predictor variables, as well as the relationships between the most important predictors and biological condition. Prediction accuracy and the relative importance of predictor variables were different for two subregions for which models were created. Predictive accuracy in the highlands region improved by including predictors that represented both natural and human activities. Riparian land cover and road-stream intersections were the most important predictors. In contrast, predictive accuracy in the lowlands region was best for models limited to predictors representing natural factors, including basin topography and soil properties. Partial dependence plots revealed complex and nonlinear relationships between specific predictors and the probability of biological alteration. We demonstrate a potential application of the model by predicting biological condition in 552 unsampled basins across an ecoregion in southeastern Wisconsin (USA). Estimates of the likelihood of biological condition of unsampled streams could be a valuable tool for screening large numbers of basins to focus targeted monitoring of potentially unaltered or altered stream segments.

Wrapping of single-walled carbon nanotubes by a pi-conjugated polymer: the role of polymer conformation-controlled size selectivity.

Wrapping of a single-walled carbon nanotube (SWNT) was examined by using a poly[( m-phenylenevinylene)- alt-( p-phenylenevinylene)] (PmPV) derivative. The polymer's intrinsic ability in forming a helical conformation was found to play an essential role in the separation of nanotubes. Among about 15 tubes present in the pure SWNT (HiPcoTM) sample, the polymer was found to selectively pick up the tubes (11,6), (11,7) and (12,6), which correspond to tube diameters of 1.19, 1.25 and 1.24 nm, respectively. The SWNTs of smaller diameters were held loosely by the PmPV, and were gradually dropped out under centrifugation. The suspension solution prepared from the SWNT and PmPV was not permanently stable, with precipitation occurring after a few weeks. Irradiation in the UV-vis region exhibited a catalytic effect to shorten the precipitation time to hours. Those tubes, which were held loosely by PmPV, were quickly separated from the suspension during the irradiation process.

Antibody-mediated protection against genital herpes simplex virus type 2 disease in mice by Fc gamma receptor-dependent and -independent mechanisms.

The ability of antibody (Ab) to modulate HSV pathogenesis is well recognized but the mechanisms by which HSV-specific IgG antibodies protect against genital HSV-2 disease are not well understood. The requirement for Ab interactions with Fcgamma receptors (FcgammaR) in protection was examined using a murine model of genital HSV-2 infection. IgG antibodies isolated from the serum of HSV-immune mice protected normal mice against HSV-2 disease when administered prior to genital HSV-2 inoculation. However, protection was significantly diminished in recipient mice lacking the gamma chain subunit utilized in FcgammaRI, FcgammaRIII, FcgammaRIV and FcepsilonRI receptors and in normal mice depleted of Gr-1(+) immune cell populations known to express FcgammaR, suggesting protection was largely mediated by an FcgammaR-dependent mechanism. To test whether neutralizing Ab might provide superior protection, a highly neutralizing HSV glycoprotein D (gD)-specific monoclonal antibody (mAb) was utilized. Similar to results with HSV-specific polyclonal IgG, administration of the gD-specific mAb did not prevent initial infection of the genital tract but resulted in lower virus loads in the vaginal epithelium and provided significant protection against disease and acute infection of the sensory ganglia; however, this protection was independent of host FcgammaR expression and was manifest in mice depleted of Gr-1(+) immune cells. Together, these data demonstrate that substantial Ab-mediated protection against genital HSV-2 disease could be achieved by either FcgammaR-dependent or -independent mechanisms. These studies suggest that HSV vaccines might need to elicit multiple, diverse antibody effector mechanisms to achieve optimal protection.

Can basin land use effects on physical characteristics of streams be determined at broad geographic scales?

The environmental setting (e.g., climate, topography, geology) and land use affect stream physical characteristics singly and cumulatively. At broad geographic scales, we determined the importance of environmental setting and land use in explaining variation in stream physical characteristics. We hypothesized that as the spatial scale decreased from national to regional, land use would explain more of the variation in stream physical characteristics because environmental settings become more homogeneous. At a national scale, stepwise linear regression indicated that environmental setting was more important in explaining variability in stream physical characteristics. Although statistically discernible, the amount of variation explained by land use was not remarkable due to low partial correlations. At level II ecoregion spatial scales (southeastern USA plains, central USA plains, and a combination of the western Cordillera and the western interior basins and ranges), environmental setting variables were again more important predictors of stream physical characteristics, however, as the spatial scale decreased from national to regional, the portion of variability in stream physical characteristics explained by basin land use increased. Development of stream habitat indicators of land use will depend upon an understanding of relations between stream physical characteristics and environmental factors at multiple spatial scales. Smaller spatial scales will be necessary to reduce the confounding effects of variable environmental settings before the effects of land use can be reliably assessed.

Modulation of the turnover of formamidopyrimidine DNA glycosylase.

In recent years, significant progress has been made in determining the catalytic mechanisms by which base excision repair (BER) DNA glycosylases and glycosylase-abasic site (AP) lyases cleave the glycosyl bond. While these investigations have identified active site residues and active site architectures, few investigations have analyzed postincision turnover events. Previously, we identified a critical residue (His16) in the T4-pyrimidine dimer glycosylase (T4-Pdg) that, when mutated, interferes with enzyme turnover [Meador et al. (2004) J. Biol. Chem. 279, 3348-3353]. To test whether comparable residues and mechanisms might be operative for other BER glycosylase:AP-lyases, molecular modeling studies were conducted comparing the active site regions of T4-Pdg and the Escherichia coli formamidopyrimidine DNA glycosylase (Fpg). These analyses revealed that His71 in Fpg might perform a similar function to His16 in T4-Pdg. Site-directed mutagenesis of the Fpg gene and analyses of the reaction mechanism of the mutant enzyme revealed that the H71A enzyme retained activity on a DNA substrate containing an 8-oxo-7,8-dihydroguanine (8-oxoG) opposite cytosine and DNA containing an AP site. The H71A Fpg mutant was severely compromised in enzyme turnover on the 8-oxoG-C substrate but had turnover rates comparable to that of wild-type Fpg on AP-containing DNA. The similar mutant phenotypes for these two enzymes, despite a complete lack of structural or sequence homology between them, suggest a common mechanism for the rate-limiting step catalyzed by BER glycosylase:AP-lyases.

Phenacenes from Diels-Alder trapping of photogenerated o-xylylenols: phenanthrenes and benzo[e]pyrene bisimide.

[structure: see text] The synthesis of phenanthrene and benzo[e]pyrene bisimides, 1 and 2, was accomplished via the Diels-Alder trapping of sterically congested o-xylylenols photochemically generated from 3,6-dibenzoyl-o-xylene and 1,4-dibenzoyl-9,10-dihydroanthracene, respectively. Absorption and emission from 2 are red-shifted from 1 and unsubstituted benzo[e]pyrene. The fluorescence quantum yield for 2 is an order of magnitude lower than that of 1 and comparable to that of the parent benzo[e]pyrene.

Twisted, Z-shaped perylene bisimide.

The first derivative of a new class of perylene bisimide chromophores, N,N'-bis(octyl)-3,9-bis(phenyl)perylene-1,2,7,8-tetracarboxyl bisimide, 1, has been synthesized and its fundamental photophysical and electrochemical properties assessed. The extended, Z-shaped structure was achieved by use of the classic photoenolization of an o-methylbenzophenone analogue, 1,5-dibenzoyl-9,10-dihydroanthracene, and in situ Diels-Alder trapping of the resulting o-xylylenol intermediates with N-octylmaleimide. Subsequent dehydration and aromatization of the resulting bisadduct afforded 1. In dichloromethane, bisimide 1 has an absorption lambdamax at 491 nm (epsilon = 29,600 M-1 cm-1), a fluorescence lambdamax at 517 nm with a high quantum yield (Phi = 0.70), and a single-exponential fluorescence decay (tau = 5.01 ns). Pure crystals of 1 have red emission, suggesting exciplex formation in the solid state. X-ray crystallographic analysis of 1 revealed significant twisting of its perylene core.

Long-term presence of virus-specific plasma cells in sensory ganglia and spinal cord following intravaginal inoculation of herpes simplex virus type 2.

The tissue sites of long-term herpes simplex virus type 2 (HSV-2)-specific antibody production in mice and guinea pigs were identified. In addition to secondary lymphoid tissue and bone marrow, HSV-specific plasma cells were detected in spinal cords of mice up to 10 months after intravaginal inoculation with a thymidine kinase-deficient HSV-2 strain and in lumbosacral ganglia and spinal cords of guinea pigs inoculated with HSV-2 strain MS. The long-term retention of virus-specific plasma cells in the peripheral and central nervous systems following HSV infection may be important for resistance to reinfection of neuronal tissues or may play a role in modulation of reactivation from latency.