Novel Glutathione Activated Smart Probe for Photoacoustic Imaging, Photothermal Therapy, and Safe Postsurgery Treatment.

Preventing tumor recurrence is the most important target for cancer treatment. However, the current effective and advanced technology relies on the use of near-infrared region (NIR), and the equipment of NIR-I and NIR-II fluorescence imaging technique-based fluorescent-guided surgery is expensive and complicated to operate. Here, we report a safe and effective strategy of an organic-inorganic hybrid gold nanoparticle-based novel smart probe (Au@PDA-ss-PEGm NPs) which is appropriate for photoacoustic imaging (PAI) and plasmonic photothermal therapy (PPTT) of tumors in vivo. After intravenous injection, the probe would be transported to the tumor to penetrate the cellular membrane. Then the disulfide bond on the probe surface would be broken with the help of a high concentration of glutathione in the tumor cell. The remaining Au@PDA NPs would aggregate to form plasmonic nanoclusters and exhibit a notable plasmon coupling enhanced photothermal (PCEPT) effect. Besides, the results further proved its good biosafety and pharmacokinetic characteristics in vivo and, more important, a short time exposure under 808 nm laser after surgical removal of the tumor, which would be effective to prevent tumor recurrence and bring dawn to the high-efficiency treatment of tumors.

Design and Detection of Cyanide Raman Tag pH-Responsive SERS Probes.

As one of the most important parameters of biochemical analysis and detection, the pH value plays a very important role in cell function, food preservation and production, soil and water sources, and other applications. This makes it increasingly important to explore pH detection methods in depth. In this paper, a pH-responsive SERS probe based on the cyano Raman Tag was designed to realize pH sensing detection through the influence of the pH value of analytes on the displacement of the cyano Raman peak in the SERS probe. This cyano Raman tag exhibited not only excellent sensitivity in the liner range of pH 3.0-9.0 with a limit of detection (LOD) of pH 0.33, but also the anti-interference performance and stability (the relative standard deviation (RSD) was calculated to be 6.68%, n = 5). These results indicated that this pH SERS probe with the Raman cyano tag can provide new research ideas for future biological detection, bioimaging, and environmental detection.

High stability and luminance efficiency thieno[2,3-d]pyridazine-based iridium complexes and their applications in high-performance yellow OLEDs.

Three novel phosphorescent iridium(iii) complexes with thieno[2,3-d]pyridazine derivatives as cyclometalating chelates were successfully synthesized. These complexes exhibited intense green or yellow phosphorescence emission with short lifetimes of 1.71-1.91 µs and very high quantum yields of over 85% in PMMA films. Even in air-equilibrated CH2Cl2, their quantum yields could be up to 36%. They also showed good thermal stability with Td > 338 °C. The electronic structure information of these complexes was discussed by density functional theory. The tris-cyclometalated complex Ir1 was an excellent yellow phosphorescent dopant for OLED applications, and the maximum CE and PE based on it were 58.5 cd A-1 and 45.9 lm W-1, respectively, with the maximum EQE of 18.2% which was ca. 1.4 times more efficient than that of PO-01. These results indicate that these new complexes have potential applications as efficient phosphors in OLEDs.

Novel phosphorescent triptycene-based Ir(iii) complexes for organic light-emitting diodes.

A series of charge-neutral cyclometalated iridium(iii) complexes (1-3 and 5-7) containing triptycene-substituted ligands (tbt and tpbi) and two parent complexes (4 and 8) were synthesized and characterized. The crystal structures indicated that π-π stacking interactions existed in ligand tbtH, but not in complex 6. However, a large intramolecular repulsion was found in complex 6. These triptycene-based complexes exhibited good thermal stability, which was higher compared with that of the parent complexes. These complexes showed green to yellow emission with peaks that ranged from 503 to 563 nm. The introduction of the rigid non-conjugate triptycene skeleton caused a slight emission red shift (<25 nm), but a significant increase in the PLQYs (>47%) was observed. The electroluminescent devices employing 2 and 6 as phosphors displayed impressive performance improvements and low efficiency roll-off because of the higher PLQYs and HOMO levels of these triptycene-based complexes. The maximum current and external quantum efficiencies of the devices based on complexes 2 and 6 were 41.7 cd A-1, 11.9% and 41.2 cd A-1, 12.6%, respectively, which were about 31% higher than that of the devices based on the parent complexes 4 and 8. This work provides a novel approach to develop highly efficient phosphors with a triptycene skeleton.

Solution processed single-emission layer white polymer light-emitting diodes with high color quality and high performance from a poly(N-vinyl)carbazole host.

Low cost and high performance white polymer light-emitting diodes (PLEDs) are very important as solid-state lighting sources. In this research three commercially available phosphors were carefully chosen, bis[2-(4,6-difluorophenyl)pyridinato-N,C(2)](picolinate)iridium(III) (FIrpic), bis[2-(2-pyridinyl-N)phenyl-C](2,4-pentanedionato-O(2),O(4))iridium(III) [Ir(ppy)2(acac)], and bis(2-phenyl-benzothiazole-C(2),N)(acetylacetonate)iridium(III) [Ir(bt)2(acac)], plus a home-made red phosphor of tris[1-(2,6-dimethylphenoxy)-4-(4-chlorophenyl)phthalazine]iridium(III) [Ir(MPCPPZ)3], and their photophysical and morphological properties were systematically studied as well as their applications in single-emission layer white PLEDs comprising poly(N-vinylcarbazole) as host. Additionally, the electrochemical properties and energy level alignment, possible energy transfer process, and thin-film morphology were also addressed. The binary blue/orange complementary white PLEDs exhibit stable electroluminescence spectra, wide spectrum-covering region range from 380-780 nm, and high color rendering index (CRI) over 70 with Commission Internationale de l'Eclairage coordinates x,y (CIEx,y) of (0.388, 0.440), correlated color temperature (CCT) of around 4400, plus high efficiency of 25.5 cd A(-1). The optimized red-green-blue white PLEDs showed a satisfactory CRI of around 82.4, maximum current efficiency of 20.0 cd A(-1) and external quantum efficiency (EQE) of 10.8%, corresponding to a CCT of 3700-2800, which is a warm-white hue. At last, stable and high color quality, red-green-orange-blue four component white PLEDs, with a CRI of over 82, a high efficiency of 24.0 cd A(-1), EQE of 11.5%, and high brightness of 43,569.9 cd m(-2) have been obtained.

Multi-functional fluorescent probe for Hg2+, Cu2+ and ClO- based on a pyrimidin-4-yl phenothiazine derivative.

A multi-functional fluorescent probe based on PzDPM (10-ethyl-3,7-di(pyrimidin-4-yl)-10H-phenothiazine) for Hg(2+), Cu(2+) and ClO(-) has been synthesized and characterized. The probe comprises an electron-donating fluorophore core of 10-ethylphenothiazine and two Hg(2+)-specific chelating arms of pyrimidin-4-yl. The 10-ethylphenothiazine also acts as a Cu(2+)/ClO(-)-specific reactive moiety. PzDPM exhibits green fluorescence and selectively senses Hg(2+)/Cu(2+) upon coordination/reaction in acetonitrile (MeCN), and behaves as a turn-off chemosensor or ratiometric chemodosimeter, respectively. On the other hand, PzDPM is very weakly emissive in aqueous solution but acts as an excellent turn-on chemodosimeter for ClO(-) in 1 : 4 (v/v) MeCN : Tris-HCl (10 mM, pH = 7.0) with a maximum fluorescent intensity increase of over 110-fold. The probe PzDPM allows the determination of Hg(2+), Cu(2+) and ClO(-) at 10(-7) M levels with satisfactory selectivity.

Effect of pH on the photophysical properties of two new carboxylic-substituted iridium(III) complexes.

Two cyclometalated iridium(III) complexes have been prepared based on 2-(4-diphenylamino-phenyl)-quinoline and incorporating carboxylic acid ethyl ester (­COOC(2)H(5), (TPAQCE)(2)Irpic and carboxylic acid (­COOH, (TPAQCOOH)(2)Irpic) substituents at the 4-position of the quinoline ligand, respectively. The absorption, emission and (1)H NMR spectra of (TPAQCE)(2)Irpic and (TPAQCOOH)(2)Irpic under alkaline or acidic conditions demonstrate that they respond to the pH of the surrounding solvent environment. The deprotonation of the carboxylic acid group significantly blue-shifts the metal-to-ligand charge transfer absorption band of (TPAQCOOH)(2)Irpic by 48 nm and enhances the emission quantum-yield in DMSO. In addition, (1)H-NMR titration reveals that (TPAQCOOH)(2)Irpic is deprotonated into negatively charged (TPAQCOO(−))(2)Irpic in free DMSO-d(6) solution, and the acid-induced N^O ancillary ligands cleavage or replacement in (TPAQCOOH)(2)Irpic could be ignored. A water-soluble near-neutral optical pH probe (TPAQCOOH)(2)Irpic with pK(a) of ~7 is also reported. In aqueous buffer, (TPAQCOOH)(2)Irpic possesses an obvious emission response with an excellent linearity in the pH range of 6.50­8.00, showing a promising application in bioprocessing.

Phosphorescent chemosensor for Hg2+ and acetonitrile based on iridium(III) complex.

A new phosphorescent chemosensor for Hg(2+) and acetonitrile (MeCN) based on iridium(III) complex Ir(dpp)(2)(dtc) (Ir1, dppH = 4,6-diphenylpyrimidine, dtcH = diethyl dithiocarbamic acid) was realized. Upon addition of a tetrahydrofuran (THF) solution of Hg(2+), the dichloromethane (DCM) solution of Ir1 gave a visual color change and significant fluorescent quenching. When MeCN was added, a new fluorescent emission emerged, which constituted a selective MeCN phosphorescent chemosensor. Complex Ir1 has been developed as an AND logic gate with Hg(2+) and MeCN as inputs.

First-principles study of rectification in bis-2-(5-ethynylthienyl)ethyne molecular junctions.

Using density functional theory (DFT) combined with the first-principles nonequilibrium Green's function (NEGF), we investigated the electron-transport properties and rectifying behaviors of several molecular junctions based on the bis-2-(5-ethynylthienyl)ethyne (BETE) molecule. To examine the roles of different rectification factors, asymmetric electrode-molecule contacts and donor-acceptor substituent groups were introduced into the BETE-based molecular junction. The asymmetric current-voltage characteristics were obtained for the molecular junctions containing asymmetric contacts and donor-acceptor groups. In our models, the computed rectification ratios show that the mode of electrode-molecule contacts plays a crucial role in rectification and that the rectifying effect is not enhanced significantly by introducing the additional donor-acceptor components for the molecular rectifier with asymmetric electrode-molecule contacts. The current-voltage characteristics and rectifying behaviors are discussed in terms of transmission spectra, molecular projected self-consistent Hamiltonian (MPSH) states, and energy levels of MPSH states.

Theoretical studies of electron transport in thiophene dimer: effects of substituent group and heteroatom.

The electron-transport properties of various substituted molecules based on the thiol-ended thiophene dimer (2Th1DT) are investigated through density functional theory (DFT) combined with nonequilibrium Green's function (NEGF) method. The current-voltage (I-V) curves of all the Au/2Th1DT/Au systems in this work display similar steplike features, while their equilibrium conductances show a large difference and some of these I-V curves are asymmetric distinctly. The results reveal the dependence of conductance on the energy level of the substituted 2Th1DT molecules. Rectification ratios are computed to examine the asymmetric properties of the I-V curves. The rectifying behavior in the 2Th1DT molecule containing the amino group close to the molecular end is more prominent than that in the other molecules. The rectifying behavior is analyzed through transmission spectra and molecular projected self-consistent Hamiltonian (MPSH) states. Slight negative differential resistance (NDR) can be observed in some of the systems. The electron-transport properties of 2Th1DT molecules containing different heteroatoms are also investigated. The results indicate that the current in heteroatom-containing molecules is larger than that in their pristine analogues, and lighter heteroatoms are more favorable than heavier heteroatoms for electron transport of the thiophene dimer.

(4'-All-yloxy-2,2':6',2''-terpyridine)(dibenzoyl-methanido)dinitratoerbium(III) acetonitrile solvate.

The title complex, [Er(C(15)H(11)O(2))(NO(3))(2)(C(18)H(15)N(3)O)]·CH(3)CN, has been synthesized from 4'-all-yloxy-2,2':6',2''-terpyridine (altpy), dibenzoyl-methane and erbium nitrate. The distorted monocapped square anti-prismatic coordination polyhedron is formed by a bidentate dibenzoyl-methanide residue, a tridentate altpy ligand and two nitrate anions that act as bidentate ligands and occupy mutually trans sites.

(4'-All-yloxy-2,2':6',2''-terpyridine-κN,N',N'')(dibenzoyl-methanido-κO,O')bis-(nitrato-κO,O')neodymium(III) acetonitrile solvate.

The title complex, [Nd(C(15)H(11)O(2))(NO(3))(2)(C(18)H(15)N(3)O)]·CH(3)CN or [Nd(altpy)(dbm)(NO(3))(2)]·CH(3)CN (altpy = 4'-all-yl-oxy-2,2':6',2''-terpyridine, dbm = dibenzoyl-methanide anion), has been synthesized from 4'-all-yloxy-2,2':6',2''-terpyridine, dibenzoyl-methanate and neodymium nitrate. The Nd(3+) atom is nine-coordinated by two O atoms from the bidentate dbm ligand, three N atoms from the tridentate altpy ligand and four O atoms from two nitrate anions that act as bidentate ligands and occupy mutually trans sites in a distorted monocapped square-anti-prismatic geometry.