Trade-off between processability and device performance in donor-acceptor semiconductors revealed using discrete siloxane side chains.

Donor-acceptor polymeric semiconductors are crucial for state-of-the-art applications, such as electronic skin mimics. The processability, and thus solubility, of these polymers in benign solvents is critical and can be improved through side chain engineering. Nevertheless, the impact of novel side chains on backbone orientation and emerging device properties often remains to be elucidated. Here, we investigate the influence of elongated linear and branched discrete oligodimethylsiloxane (oDMS) side chains on solubility and device performance. Thereto, diketopyrrolopyrrole-thienothiophene polymers are equipped with various oDMS pendants (PDPPTT-Sin) and subsequently phase separated into lamellar domains. The introduction of a branching point in the siloxane significantly enhanced the solubility of the polymer, as a result of increased backbone distortion. Simultaneously, the charge carrier mobility of the polymers decreased by an order of magnitude upon functionalization with long and/or branched siloxanes. This work unveils the intricate balance between processability and device performance in organic semiconductors, which is key for the development of next-generation electronic devices.

Supramolecular Polymerization as a Tool to Reveal the Magnetic Transition Dipole Moment of Heptazines.

Heptazine derivatives have attracted significant interest due to their small S1-T1 gap, which contributes to their unique electronic and optical properties. However, the nature of the lowest excited state remains ambiguous. In the present study, we characterize the lowest optical transition of heptazine by its magnetic transition dipole moment. To measure the magnetic transition dipole moment, the flat heptazine must be chiroptically active, which is difficult to achieve for single heptazine molecules. Therefore, we used supramolecular polymerization as an approach to make homochiral stacks of heptazine derivatives. Upon formation of the supramolecular polymers, the preferred helical stacking of heptazine introduces circular polarization of absorption and fluorescence. The magnetic transition dipole moments for the S1 ← S0 and S1 → S0 are determined to be 0.35 and 0.36 Bohr magneton, respectively. These high values of magnetic transition dipole moments support the intramolecular charge transfer nature of the lowest excited state from nitrogen to carbon in heptazine and further confirm the degeneracy of S1 and T1.

Functionalization of Supramolecular Polymers by Dynamic Covalent Boroxine Chemistry.

Molecular scaffolds that enable the combinatorial synthesis of new supramolecular building blocks are promising targets for the construction of functional molecular systems. Here, we report a supramolecular scaffold based on boroxine that enables the formation of chiral and ordered 1D supramolecular polymers, which can be easily functionalized for circularly polarized luminescence. The boroxine monomers are quantitatively synthesized in situ, both in bulk and in solution, from boronic acid precursors and cooperatively polymerize into 1D helical aggregates stabilized by threefold hydrogen-bonding and π-π stacking. We then demonstrate amplification of asymmetry in the co-assembly of chiral/achiral monomers and the co-condensation of chiral/achiral precursors in classical and in situ sergeant-and-soldiers experiments, respectively, showing fast boronic acid exchange reactions occurring in the system. Remarkably, co-condensation of pyrene boronic acid with a hydrogen-bonding chiral boronic acid results in chiral pyrene aggregation with circularly polarized excimer emission and g-values in the order of 10-3. Yet, the electron deficiency of boron in boroxine makes them chemically addressable by nucleophiles, but also sensitive to hydrolysis. With this sensitivity in mind, we provide first insights into the prospects offered by boroxine-based supramolecular polymers to make chemically addressable, functional, and adaptive systems.

Consequences of Vibrational Strong Coupling on Supramolecular Polymerization of Porphyrins.

Supramolecular polymers display interesting optoelectronic properties and, thus, deploy multiple applications based on their molecular arrangement. However, controlling supramolecular interactions to achieve a desirable molecular organization is not straightforward. Over the past decade, light-matter strong coupling has emerged as a new tool for modifying chemical and material properties. This novel approach has also been shown to alter the morphology of supramolecular organization by coupling the vibrational bands of solute and solvent to the optical modes of a Fabry-Perot cavity (vibrational strong coupling, VSC). Here, we study the effect of VSC on the supramolecular polymerization of chiral zinc-porphyrins (S-Zn) via a cooperative effect. Electronic circular dichroism (ECD) measurements indicate that the elongation temperature (Te) of the supramolecular polymerization is lowered by ∼10 °C under VSC. We have also generalized this effect by exploring other supramolecular systems under strong coupling conditions. The results indicate that the solute-solvent interactions are modified under VSC, which destabilizes the nuclei of the supramolecular polymer at higher temperatures. These findings demonstrate that the VSC can indeed be used as a tool to control the energy landscape of supramolecular polymerization. Furthermore, we use this unique approach to switch between the states formed under ON- and OFF-resonance conditions, achieved by simply tuning the optical cavity in and out of resonance.

Supramolecular polymers form tactoids through liquid-liquid phase separation.

Liquid-liquid phase separation (LLPS) of biopolymers has recently been shown to play a central role in the formation of membraneless organelles with a multitude of biological functions1-3. The interplay between LLPS and macromolecular condensation is part of continuing studies4,5. Synthetic supramolecular polymers are the non-covalent equivalent of macromolecules but they are not reported to undergo LLPS yet. Here we show that continuously growing fibrils, obtained from supramolecular polymerizations of synthetic components, are responsible for phase separation into highly anisotropic aqueous liquid droplets (tactoids) by means of an entropy-driven pathway. The crowding environment, regulated by dextran concentration, affects not only the kinetics of supramolecular polymerizations but also the properties of LLPS, including phase-separation kinetics, morphology, internal order, fluidity and mechanical properties of the final tactoids. In addition, substrate-liquid and liquid-liquid interfaces proved capable of accelerating LLPS of supramolecular polymers, allowing the generation of a myriad of three-dimensional-ordered structures, including highly ordered arrays of micrometre-long tactoids at surfaces. The generality and many possibilities of supramolecular polymerizations to control emerging morphologies are demonstrated with several supramolecular polymers, opening up a new field of matter ranging from highly structured aqueous solutions by means of stabilized LLPS to nanoscopic soft matter.

Tunable emission from H-type supramolecular polymers in optical nanocavities.

H-type supramolecular polymers with preferred helicity and highly efficient emission have been prepared from the self-assembly of chiral tetraphenylene-based monomers. Implementation of the one-dimensional fibers into dielectric nanoparticle arrays allows for a significant reshaping of fluorescence due to weak light-matter coupling.

Self-assembled soft alloy with Frank-Kasper phases beyond metals.

Soft building blocks, such as micelles, cells or soap bubbles, tend to adopt near-spherical geometry when densely packed together. As a result, their packing structures do not extend beyond those discovered in metallic glasses, quasicrystals and crystals. Here we report the emergence of two Frank-Kasper phases from the self-assembly of five-fold symmetric molecular pentagons. The µ phase, an important intermediate in superalloys, is indexed in soft matter, whereas the ϕ phase exhibits a structure distinct from known Frank-Kasper phases in metallic systems. We find a broad size and shape distribution of self-assembled mesoatoms formed by molecular pentagons while approaching equilibrium that contribute to the unique packing structures. This work provides insight into the manipulation of soft building blocks that deviate from the typical spherical geometry and opens avenues for the fabrication of 'soft alloy' structures that were previously unattainable in metal alloys.

Self-Assembly of Discrete Oligomers of Naphthalenediimides in Bulk and on Surfaces.

Here, we report on the synthesis of discrete oligomers of alkyl-bridged naphthalenediimides (NDIs) and study their molecular nanostructures both in bulk, in solution, and at the liquid-solid interface. Via an iterative synthesis method, multiple NDI cores were bridged with short and saturated alkyl-diamines (C3 and C12 ) or long and unsaturated alkyl-diamines (u2 C33 to u8 C100 ) at their imide termini. The strong intermolecular interaction between the NDI cores was observed by probing their photophysical properties in solution. In bulk, the discrete NDI oligomers preferentially ordered in lamellar morphologies, irrespective of whether a saturated or unsaturated spacer was employed. Moreover, both the molecular architecture as well as the crystallization conditions play a significant role in the nanoscale ordering. The long unsaturated alkyl chains lead preferably to folded-chain conformations while their saturated analogues form stretched arrangements. At the solution-solid interface, well-defined lamellar regions were observed. These results show that precision in chemical structure alone is not sufficient to reach well-defined structures of discrete oligomers, but that it must be combined with precision in processing conditions.

Unusual Photophysical Properties of Porphyrin-Based Supramolecular Polymers Unveiled: The Role of Metal Ligands and Side Group Amide Connectivity.

Supramolecular polymers based on porphyrins are an interesting model system, since the self-assembly and thus the photophysics can be modified by the chemical structure of the porphyrins, e.g., by a metal inserted in the ligand or by different (solubilizing) side groups. Here, we investigate the photophysical properties of supramolecular polymers based on free-base and Zn-centered porphyrins, each with different amide connectivity in the side chains, by absorption and (time-resolved) photoluminescence spectroscopy on solutions. We find that for all porphyrin derivatives the B-band absorption of supramolecular polymers is a superposition of H- and J-type aggregate spectra, while the Q-band absorption indicates only J-type aggregation. The emission of supramolecular polymers stems exclusively from the Q-band and shows only J-type behavior. For supramolecular polymers based on the free-base porphyrins, we identify only a single aggregate species, whereas for Zn-centered porphyrins, two distinct species coexist in solution, each with a (slightly) different arrangement of monomers. We rationalize this complex behavior by a slip-stacking of porphyrins along the direction of one of the two B-band transition dipole moments, resulting in simultaneous H- and J-type intermolecular coupling in the B-band. In the Q-band, with its transition dipole moments oriented 45° relative to the corresponding B-band moments, only J-type coupling is thus present. Our results demonstrate that the self-assembly and the photophysics of supramolecular polymers based on porphyrins can only be fully understood if spectral information from all bands is considered.

Higher beta-hydroxybutyrate ketone levels associated with a slower kidney function decline in ADPKD.

BACKGROUND AND HYPOTHESIS: Dysregulated energy metabolism is a recently discovered key feature of Autosomal Dominant Polycystic Kidney Disease (ADPKD). Cystic cells depend on glucose and are poorly able to use other energy sources such as ketone bodies. Raising ketone body concentration reduced disease progression in animal models of polycystic kidney diseases. Therefore, we hypothesized that higher endogenous plasma beta-hydroxybutyrate concentrations are associated with reduced disease progression in patients with ADPKD. METHODS: We analyzed data from 670 patients with ADPKD participating in the DIPAK cohort, a multi-center prospective observational cohort study. Beta-hydroxybutyrate was measured at baseline using nuclear magnetic resonance spectroscopy. Participants were excluded if they had type 2 diabetes, were using disease-modifying drugs (e.g. tolvaptan, somatostatin analogs), were not fasting, or had missing beta-hydroxybutyrate levels, leaving 521 participants for the analyses. Linear regression analyses were used to study cross-sectional associations and linear mixed-effect modeling for longitudinal associations. RESULTS: Of the participants, 61% were female, with an age of 47.3 ± 11.8 years, a height-adjusted total kidney volume (htTKV) of 834 (IQR 495-1327) ml/m, and an estimated glomerular filtration rate (eGFR) of 63.3 ± 28.9 mL/min/1.73m2. The median concentration of beta-hydroxybutyrate was 94 (IQR 68-147) µmol/L. Cross-sectionally, beta-hydroxybutyrate was neither associated with eGFR nor with htTKV. Longitudinally, beta-hydroxybutyrate was positively associated with eGFR slope (B = 0.35 ml/min/1.73m2 (95% CI 0.09 to 0.61), p = 0.007), but not with kidney growth. After adjustment for potential confounders, every doubling in beta-hydroxybutyrate concentration was associated with an improvement in the annual rate of eGFR by 0.33 ml/min/1.73m2 (95% CI 0.09 to 0.57, p = 0.008). CONCLUSION: These observational analyses support the hypothesis that interventions that raise beta-hydroxybutyrate concentration could reduce the rate of kidney function decline in patients with ADPKD.

"Boy, what are we all doing? We are crazy, really crazy": a qualitative study of psychosocial processes around an atypical one-time smoking cessation course.

BACKGROUND: Smoking prevalence is still high, which requires effective interventions that help many people who smoke at once in addition to time-consuming individual interventions. 'I Quit' is a large-scale smoking cessation course in The Netherlands. This qualitative study explored I Quit participants' experiences during and after the course, and perceptions of whether and how the course may have altered their smoking behavior. METHODS: We performed individual semi-structured interviews with course participants (N = 21) who had either quit successfully, attempted to quit but relapsed, or had continued to smoke after 'I Quit'. Shortly after qualitative data collection was completed, Foundation I Quit was accused in the media of a number of misbehaviors. Although unplanned, this provided a unique opportunity to explore participants' views on alleged fraud in a second round of interviews (N = 16). Data were collected from 2016 to 2018. RESULTS: Qualitative findings showed two psychosocial processes that may explain smoking cessation after course attendance. First, the confrontation with a large group of people who smoke, of whom some had already developed smoking-related complaints, triggered identity processes both towards and away from quitting smoking. Unorthodox methods used in the course appeared to trigger identity processes. Second, social support after the course from participants' own social network facilitated maintenance of successful quitting. The study also found that interview participants' opinions on I Quit did not change much after allegations of fraud in the media. CONCLUSIONS: Findings suggest that a one-time course might initiate psychosocial processes that could help certain smokers to gain motivation to quit, requiring a minimum of resources. Identity processes triggered by the course seem tricky as people have different ways of dealing with identity threat, some of which can be counterproductive and even result in more difficulty quitting. More research is needed to examine who can benefit from a one-time course, and who needs more support in order to quit successfully.

Solvent-Induced Pathway Complexity of Supramolecular Polymerization Unveiled Using the Hansen Solubility Parameters.

Supramolecular building blocks assembling into helical aggregates are ubiquitous in the current literature, yet the role of solvents in these supramolecular polymerizations often remains elusive. Here, we present a systematic study that quantifies solvent-supramolecular polymer compatibility using the Hansen solubility parameters (δD, δH, and δP). We first studied the solubility space of the supramolecular building block triazine-1,3,5-tribenzenecarboxamide S-T. Due to its amphiphilic nature, a dual-sphere model based on 58 solvents was applied describing the solubility space of the monomeric state (green sphere) and supramolecular polymer state (blue sphere). To our surprise, further in-depth spectroscopic and morphological studies unveiled a distinct solubility region in-between the two spheres giving rise to the formation of higher-order aggregated structures. This phenomenon occurs due to subtle differences in polarity between the solvent and the side chains and highlights the solvent-induced pathway complexity of supramolecular polymerizations. Subsequent variations in concentration and temperature led to the expansion and contraction of both solubility spheres providing two additional features to tune the monomer and supramolecular polymer solubility. Finally, we applied our dual-sphere model on structurally disparate monomers, such as Zn-porphyrin (S-P) and triphenylamine (S-A), demonstrating the generality of the model and the importance of the supramolecular monomer design in connection with the solvent used. This work unravels the solvent-induced pathway complexity of discotic supramolecular building blocks using a parametrized approach in which interactions between the solvent and solute play a crucial role.

Hapten/Myristoyl Functionalized Poly(propyleneimine) Dendrimers as Potent Cell Surface Recruiters of Antibodies for Mediating Innate Immune Killing.

Recruiting endogenous antibodies to the surface of cancer cells using antibody-recruiting molecules has the potential to unleash innate immune effector killing mechanisms against antibody-bound cancer cells. The affinity of endogenous antibodies is relatively low, and many currently explored antibody-recruiting strategies rely on targeting over-expressed receptors, which have not yet been identified in most solid tumors. Here, both challenges are addressed by functionalizing poly(propyleneimine) (PPI) dendrimers with both multiple dinitrophenyl (DNP) motifs, as anti-hapten antibody-recruiting motifs, and myristoyl motifs, as universal phospholipid cell membrane anchoring motifs, to recruit anti-hapten antibodies to cell surfaces. By exploiting the multivalency of the ligand exposure on the dendrimer scaffold, it is demonstrated that dendrimers featuring ten myristoyl and six DNP motifs exhibit the highest antibody-recruiting capacity in vitro. Furthermore, it is shown that treating cancer cells with these dendrimers in vitro marks them for phagocytosis by macrophages in the presence of anti-hapten antibodies. As a proof-of-concept, it is shown that intratumoral injection of these dendrimers in vivo in tumor-bearing mice results in the recruitment of anti-DNP antibodies to the cell surface in the tumor microenvironment. These findings highlight the potential of dendrimers as a promising class of novel antibody-recruiting molecules for use in cancer immunotherapy.

Temperature Directs the Majority-Rules Principle in Supramolecular Copolymers Driven by Triazine-Benzene Interactions.

Supramolecular copolymers have typically been studied in the extreme cases, such as self-sorting or highly mixed copolymer systems, while the intermediate systems have been less understood. We have reported the temperature-dependent microstructure in copolymers of triazine- and benzene-derivatives based on charge-transfer interactions with a highly alternating microstructure at low temperatures. Here, we investigate the temperature-dependent copolymerization further and increase the complexity by combining triazine- and benzene-derivatives with opposite preferred helicities. In this case, intercalation of the benzene-derivative into the triazine-derivative assemblies causes a helical inversion. The inversion of the net helicity was rationalized by comparing the mismatch penalties of the individual monomers, which indicated that the benzene-derivative dictates the helical screw-sense of the supramolecular copolymers. Surprisingly, this was not reflected in further investigations of slightly modified triazine- and benzene-derivatives, thus highlighting that the outcome is a subtle balance between structural features, where small differences can be amplified due to the competitive nature of the interactions. Overall, these findings suggest that the temperature-dependent microstructure of triazine- and benzene-based supramolecular copolymers determines the copolymer helicity of the presented system in a similar way as the mixed majority-rules phenomenon.

Pathway Complexity in Nanotubular Supramolecular Polymerization: Metal-Organic Nanotubes with a Planar-Chiral Monomer.

Here, we report an anomalous pathway complexity in the supramolecular polymerization of a chiral monomer, which displays an unusual chiroptical feature that does not follow any of the known stereochemical rules such as "chiral self-sorting" and "majority rule". We newly developed a planar-chiral ferrocene-cored tetratopic pyridyl monomer FcL, which underwent AgBF4-mediated supramolecular polymerization to give nanotubes FcNTs composed of metal-organic nanorings FcNRs. Although FcNRs must be homochiral because of a strong geometrical constraint, FcNRs were formed even efficiently from racemic FcL and AgBF4. Detailed studies revealed the presence of two competing pathways for producing homochiral FcNRs as the constituents of FcNTs: (i) spontaneous cyclization of initially formed acyclic polymers -[FcL-Ag+]n- and (ii) template (FcNR)-assisted cyclization via a Ag+···Ag+ metallophilic interaction. The dominance of the two pathways changes depending on the %ee of chiral FcL. Namely, when the %ee of FcL is high, -[FcL-Ag+]n- must contain sufficiently long homochiral sequences that can be readily cyclized into FcNRs. Meanwhile, when the %ee of FcL is low, the homochiral sequences in -[FcL-Ag+]n- must be short and therefore are hardly eligible for spontaneous cyclization. Why were FcNRs formed? Even though the probability is very low, homochiral -[FcL-Ag+]n- can be statistically generated and undergo spontaneous cyclization to give FcNRs minutely. We found that FcNRs can be amplified by heterochirally templating their own synthesis using metallophilic interaction. Because of this stereochemical preference, the growth of FcNRs into FcNTs via the template-assisted mechanism occurs only when both (R,R)FcL and (S,S)FcL are present in the polymerization system.

Controlling Helical Asymmetry in Supramolecular Copolymers by In Situ Chemical Modification.

Amplification of asymmetry in complex molecular systems results from a delicate interplay of chiral supramolecular structures and their chemical reactivity. In this work, we show how the helicity of supramolecular assemblies can be controlled by performing a non-stereoselective methylation reaction on comonomers. By methylating chiral glutamic acid side chains in benzene-1,3,5-tricarboxamide (BTA) derivatives to form methyl esters, the assembly properties are modulated. As reacted comonomers, the methyl ester-BTAs induce a stronger bias in the screw-sense of helical fibers predominantly composed of stacked achiral alkyl-BTA monomers. Hence, applying the in situ methylation in a system with the glutamic acid-BTA comonomer induces asymmetry amplification. Moreover, mixing small quantities of enantiomers of glutamic acid-BTA and glutamate methyl ester-BTA in the presence of the achiral alkyl-BTAs leads to deracemization and inversion of the helical structures in solution via the in situ reaction toward a thermodynamic equilibrium. Theoretical modeling suggests that the observed effects are caused by enhanced comonomer interactions after the chemical modification. Our presented methodology enables on-demand control over asymmetry in ordered functional supramolecular materials.

Ferro- and ferrielectricity and negative piezoelectricity in thioamide-based supramolecular organic discotics.

Amide-based discotic supramolecular organic materials are of interest for fundamental understanding of cooperative self-assembly and collective dipole switching mechanisms as well as for practically relevant ferroelectric and piezoelectric properties. Here, we show how replacing amides (dipole moment of ∼3.5 D) with thioamides (∼5.1 D) as dipolar moieties in the archetypal C3-symmetric discotic molecule BTA leads to ferroelectric materials with a higher remnant polarization and lower coercive field. The thioamide-based materials also demonstrate a rare negative piezoelectricity and a previously predicted, yet never experimentally observed, polarization reversal via asymmetric intermediate states, that is, ferrielectric switching.

Highly Ordered Supramolecular Materials of Phase-Separated Block Molecules for Long-Range Exciton Transport.

Efficient energy transport over long distances is essential for optoelectronic and light-harvesting devices. Although self-assembled nanofibers of organic molecules are shown to exhibit long exciton diffusion lengths, alignment of these nanofibers into films with large, organized domains with similar properties remains a challenge. Here, it is shown how the functionalization of C3 -symmetric carbonyl-bridged triarylamine trisamide (CBT) with oligodimethylsiloxane (oDMS) side chains of discrete length leads to fully covered surfaces with aligned domains up to 125 × 70 µm2 in which long-range exciton transport takes place. The nanoscale morphology within the domains consists of highly ordered nanofibers with discrete intercolumnar spacings within a soft amorphous oDMS matrix. The oDMS prevents bundling of the CBT fibers, reducing the number of defects within the CBT columns. As a result, the columns have a high degree of coherence, leading to exciton diffusion lengths of a few hundred nanometers with exciton diffusivities (≈0.05 cm2 s-1 ) that are comparable to those of a crystalline tetracene. These findings represent the next step toward fully covered surfaces of highly aligned nanofibers through functionalization with oDMS.

Simulating Assembly Landscapes for Comprehensive Understanding of Supramolecular Polymer-Solvent Systems.

Complexity in supramolecular polymer systems arises from interactions between different components, including solvent molecules. By varying their concentration or temperature in such multicomponent systems, complex phenomena can occur such as thermally bisignate and dilution-induced assembly of supramolecular polymers. Herein, we demonstrate that both these phenomena emerge from the same underlying interaction mechanism between the components. As a model system, amide-decorated supramolecular polymers of porphyrins were investigated in combination with aliphatic alcohols as hydrogen-bond scavengers, and thermodynamic mass-balance models were applied to map the three-dimensional assembly landscapes. These studies unveiled that the interaction between hydrogen-bond scavengers and monomers is temperature-dependent and becomes dominant at high monomer concentrations. With these insights, we could exploit competitive monomer-alcohol interactions to prompt the dilution-induced assembly of various common monomers as well as bisignate assembly events. Moreover, kinetic insights were obtained by navigating through the assembly landscape. Similar to phase diagrams of covalent polymers, these assembly landscapes provide a comprehensive picture of supramolecular polymerizations, which helps to precisely regulate the system properties. The generality of this approach using assembly landscapes makes it relevant for any supramolecular system, and this enhanced control will open the door to build complex and functional supramolecular polymer systems.