Development and Calibration of a Low-Cost, Piezoelectric Rainfall Sensor through Machine Learning.

In situ measurements of precipitation are typically obtained by tipping bucket or weighing rain gauges or by disdrometers using different measurement principles. One of the most critical aspects of their operational use is the calibration, which requires the characterization of instrument responses both in laboratory and in real conditions. Another important issue with in situ measurements is the coverage. Dense networks are desirable, but the installation and maintenance costs can be unaffordable with most of the commercial conventional devices. This work presents the development of a prototype of an impact rain gauge based on a very low-cost piezoelectric sensor. The sensor was developed by assembling off-the-shelf and reused components following an easy prototyping approach; the calibration of the relationship between the different properties of the voltage signal, as sampled by the rain drop impact, and rainfall intensity was established using machine-learning methods. The comparison with 1-minute rainfall obtained by a co-located commercial disdrometer highlights the fairly good performance of the low-cost sensor in monitoring and characterizing rainfall events.

An EnKF-based method to produce rainfall maps from simulated satellite-to-ground MW-link signal attenuation.

Measuring rainfall is complex, due to the high temporal and spatial variability of precipitation, especially in a changing climate, but it is of great importance for all the scientific and operational disciplines dealing with rainfall effects on the environment, human activities, and economy. Microwave (MW) telecommunication links carry information on rainfall rates along their path, through signal attenuation caused by raindrops, and can become measurements of opportunity, offering inexpensive chances to augment information without deploying additional infrastructures, at the cost of some smart processing. Processing satellite telecom signals bring some specific complexities related to the effects of rainfall boundaries, melting layer, and non-weather attenuations, but with the potential to provide worldwide precipitation data with high temporal and spatial samplings. These measurements have to be processed according to the probabilistic nature of the information they carry. An EnKF-based (Ensemble Kalman Filter) method has been developed to dynamically retrieve rainfall fields in gridded domains, which manages such probabilistic information and exploits the high sampling rate of measurements. The paper presents the EnKF method with some representative tests from synthetic 3D experiments. Ancillary data are assumed as from worldwide-available operational meteorological satellites and models, for advection, initial and boundary conditions, rain height. The method reproduces rainfall structures and quantities in a correct way, and also manages possible link outages. It results computationally viable also for operational implementation and applicable to different link observation geometries and characteristics.

Real-Time Rain Rate Evaluation via Satellite Downlink Signal Attenuation Measurement.

We present the NEFOCAST project (named by the contraction of "Nefele", which is the Italian spelling for the mythological cloud nymph Nephele, and "forecast"), funded by the Tuscany Region, about the feasibility of a system for the detection and monitoring of precipitation fields over the regional territory based on the use of a widespread network of new-generation Eutelsat "SmartLNB" (smart low-noise block converter) domestic terminals. Though primarily intended for interactive satellite services, these devices can also be used as weather sensors, as they have the capability of measuring the rain-induced attenuation incurred by the downlink signal and relaying it on an auxiliary return channel. We illustrate the NEFOCAST system architecture, consisting of the network of ground sensor terminals, the space segment, and the service center, which has the task of processing the information relayed by the terminals for generating rain field maps. We discuss a few methods that allow the conversion of a rain attenuation measurement into an instantaneous rainfall rate. Specifically, we discuss an exponential model relating the specific rain attenuation to the rainfall rate, whose coefficients were obtained from extensive experimental data. The above model permits the inferring of the rainfall rate from the total signal attenuation provided by the SmartLNB and from the link geometry knowledge. Some preliminary results obtained from a SmartLNB installed in Pisa are presented and compared with the output of a conventional tipping bucket rain gauge. It is shown that the NEFOCAST sensor is able to track the fast-varying rainfall rate accurately with no delay, as opposed to a conventional gauge.