Copper Soaps Formation in Verdigris-Linseed Oil Painting Mixtures: A Multispectroscopic Characterization.

Copper acetate (also known as verdigris) is a bimetallic Cu(II) greenish pigment widely used in oil paintings. Since ancient times, this pigment has been known as a degradation-prone compound, especially when combined with lipidic binders. However, the degradation mechanism and the involved species have not yet been disclosed. In this article, we study verdigris interactions with linseed oil in painting mock-ups, stressing out the formation of copper-based complexes and proposing reaction routes. Such complex systems are studied by applying a complementary multispectroscopic approach: a combination of continuous-wave (CW) electron paramagnetic resonance (EPR), electron spin echo envelope modulation (ESEEM), and Raman and attenuated total reflection (ATR) Fourier transform infrared (FTIR) spectroscopies. Based on the experimental evidence, we propose the following mechanism: the neutral copper acetate shifts to a basic verdigris-promoting triglyceride hydrolysis, aided by the coordination of Cu(II) cations toward the carboxylic functions. The increased amount of free fatty acids in the mixtures triggers the formation of monomeric Cu(II) complexes. Afterward, the oil polymerization reaction occurs, and secondary oxidation species, containing OH groups in the alkyl chain, act as further ligands for copper nuclei. This is the first time, to the best of our knowledge, that a comprehensive view is proposed.

SERS nanostructures with engineered active peptides against an immune checkpoint protein.

The immune checkpoint programmed death ligand 1 (PD-L1) protein is expressed by tumor cells and it suppresses the killer activity of CD8+ T-lymphocyte cells binding to the programmed death 1 (PD-1) protein of these immune cells. Binding to either PD-L1 or PD1 is used for avoiding the inactivation of CD8+ T-lymphocyte cells. We report, for the first time, Au plasmonic nanostructures with surface-enhanced Raman scattering (SERS) properties (SERS nanostructures) and functionalized with an engineered peptide (CLP002: Trp-His-Arg-Ser-Tyr-Tyr-Thr-Trp-Asn-Leu-Asn-Thr), which targets PD-L1. Molecular dynamics calculations are used to describe the interaction of the targeting peptide with PD-L1 in the region where the interaction with PD-1 occurs, showing also the poor targeting activity of a peptide with the same amino acids, but a scrambled sequence. The results are confirmed experimentally since a very good targeting activity is observed against the MDA-MB-231 breast adenocarcinoma cancer cell line, which overexpresses PD-L1. A good activity is observed, in particular, for SERS nanostructures where the CLP002-engineered peptide is linked to the nanostructure surface with a short charged amino acid sequence and a long PEG chain. The results show that the functionalized SERS nanostructures show very good targeting of the immune checkpoint PD-L1.

Efficient and reliable encapsulation for perovskite/silicon tandem solar modules.

Perovskite/silicon tandem solar cells have a tremendous potential to boost renewable electricity production thanks to their very high performance combined with promising cost structure. However, for actual field deployment, any solar cell technology needs to be assembled into modules, where the associated processes involve several challenges that may affect both the performance and stability of the devices. For instance, due to its hygroscopic nature, ethylene vinyl acetate (EVA) is incompatible with perovskite-based photovoltaics. To circumvent this issue, we investigate here two alternative encapsulant polymers for the packaging of perovskite/silicon tandems into minimodules: a thermoplastic polyurethane (TPU) and a thermoplastic polyolefin (TPO) elastomer. To gauge their impact on tandem-module performance and stability, we performed two internationally established accelerated module stability tests (IEC 61215): damp heat exposure and thermal cycling. Finally, to better understand the thermomechanical properties of the two encapsulants and gain insight into their relation to the thermal cycling of encapsulated tandems, we performed a dynamic mechanical thermal analysis. Our understanding of the packaging process of the tandem module provides useful insights for the development of commercially viable perovskite photovoltaics.

High performance multi-purpose nanostructured thin films by inkjet printing: Au micro-electrodes and SERS substrates.

Nanostructured thin metal films are exploited in a wide range of applications, spanning from electrical to optical transducers and sensors. Inkjet printing has become a compliant technique for sustainable, solution-processed, and cost-effective thin films fabrication. Inspired by the principles of green chemistry, here we show two novel formulations of Au nanoparticle-based inks for manufacturing nanostructured and conductive thin films by using inkjet printing. This approach showed the feasibility to minimize the use of two limiting factors, namely stabilizers and sintering. The extensive morphological and structural characterization provides pieces of evidence about how the nanotextures lead to high electrical and optical performances. Our conductive films (sheet resistance equal to 10.8 ± 4.1 Ω per square) are a few hundred nanometres thick and feature remarkable optical properties in terms of SERS activity with enhancement factors as high as 107 averaged on the mm2 scale. Our proof-of-concept succeeded in simultaneously combining electrochemistry and SERS by means of real-time tracking of the specific signal of mercaptobenzoic acid cast on our nanostructured electrode.

Enhancement of Magnetic Surface-Enhanced Raman Scattering Detection by Tailoring Fe3O4@Au Nanorod Shell Thickness and Its Application in the On-site Detection of Antibiotics in Water.

Surface-enhanced Raman scattering (SERS) has become a promising method for the detection of contaminants or biomolecules in aqueous media. The low interference of water, the unique spectral fingerprint, and the development of portable and handheld equipment for in situ measurements underpin its predominance among other spectroscopic techniques. Among the SERS nanoparticle substrates, those composed of plasmonic and magnetic components are prominent examples of versatility and efficiency. These substrates harness the ability to capture the target analyte, concentrate it, and generate unique hotspots for superior enhancement. Here, we have evaluated the use of gold-coated magnetite nanorods as a novel multifunctional magnetic-plasmonic SERS substrate. The nanostructures were synthesized starting from core-satellite structures. A series of variants with different degrees of Au coatings were then prepared by seed-mediated growth of gold, from core-satellite structures to core-shell with partial and complete shells. All of them were tested, using a portable Raman instrument, with the model molecule 4-mercaptobenzoic acid in colloidal suspension and after magnetic separation. Experimental results were compared with the boundary element method to establish the mechanism of Raman enhancement. The results show a quick magnetic separation of the nanoparticles and excellent Raman enhancement for all the nanoparticles both in dispersion and magnetically concentrated with limits of detection up to the nM range (∼50 nM) and a quantitative calibration curve. The nanostructures were then tested for the sensing of the antibiotic ciprofloxacin, highly relevant in preventing antibiotic contaminants in water reservoirs and drug monitoring, showing that ciprofloxacin can be detected using a portable Raman instrument at a concentration as low as 100 nM in a few minutes, which makes it highly relevant in practical point-of-care devices and in situ use.

Simple and sustainable synthesis of perovskite-based optoelectronic material: CsPbBr3 nanocrystals via laser ablation in alcohol.

All-inorganic lead halide perovskite nanocrystals (NCs) have shown great potential as emerging semiconducting materials due to their excellent optoelectronic properties. However, syntheses in solution commonly use high temperatures and toxic solvents, which are obstacles for safety and sustainability of the process. In this work, laser ablation in alcohol is proposed as a simple and sustainable, ligand-free, top-down approach to synthesize CsPbBr3 nanocrystals in ambient conditions. The effects of different low boiling point commercial alcohols used as solvents on the optical properties of CsPbBr3 NCs colloidal solutions are investigated. Although in traditional bottom-up synthesis alcohols are usually found to be not appropriate for the synthesis of perovskite NCs, here it is demonstrated that CsPbBr3 orthorhombic nanocrystals with narrow full width half maximum (FWHM < 18 nm), long photoluminescence lifetimes (up to 17.9 ns) and good photoluminescence quantum yield (PLQY up to 15.5%) can be obtained by selecting the dielectric constant and polarity of the alcohol employed for the synthesis.

Mechanical and Tribological Properties of Ta-N and Ta-Al-N Coatings Deposited by Reactive High Power Impulse Magnetron Sputtering.

In this article, the depositions and functional characterizations of Ta-N and Ta-Al-N coatings for protection purposes, grown by reactive high-power impulse magnetron sputtering onto silicon substrates, are described. Nitride films were grown while changing the substrate polarization voltage (i.e., the applied bias voltage) during the process. Moreover, the effects of adding Al to form a ternary system and the resulting variation of the coatings' mechanical and tribological properties have been widely investigated by nanoindentation, scratch, and wear tests. Micro-Raman characterization has been applied to the wear tracks to explore the comprehensive tribo-environment and wear mechanism. Interestingly, Ta-Al-N films, despite significantly improved mechanical properties, show a premature failure with respect to Ta-N coatings. The wear mechanisms of Ta-N and Ta-Al-N systems were revealed to be very different. Indeed, Ta-Al-N films suffer higher oxidation phenomena during wear, with the formation of an oxidized surface tribofilm and a reduced wear resistance, while Ta-N coatings undergo plastic deformation at the wear surface, with a slightly adhesive effect.

Application of Multispectral Imaging and Portable Spectroscopic Instruments to the Analysis of an Ancient Persian Illuminated Manuscript.

Illuminated manuscripts are, in general, the final products of a wise and complex interaction of different competencies. In particular, each manuscript reflects uses and techniques rooted in the historical and geographical traditions of the area of realization. Defining the characteristics and the materials in these valuable artefacts is an essential element to reconstruct their history and allow a more precise collocation and a possible comparison with other works in similar periods and areas. Non-invasive methods, mainly using portable instruments, offer undoubtedly good support in these studies. Recent analyses of an ancient Persian illuminated manuscript, combining multispectral imaging and spectroscopic measurements made with portable instruments (XRF, FORS, micro-Raman, IR-ATR) on selected points, provided new data for an improved understanding of this rare book. This study details the possibilities offered by combining these non-invasive methods for an in-depth understanding of the techniques and practices behind the realization of Middle Eastern illuminated manuscripts and provided new perspectives for multidisciplinary approaches to research in this field.

Wavy graphene sheets from electrochemical sewing of corannulene.

The presence of non-hexagonal rings in the honeycomb carbon arrangement of graphene produces rippled graphene layers with valuable chemical and physical properties. In principle, a bottom-up approach to introducing distortion from planarity of a graphene sheet can be achieved by careful insertion of curved polyaromatic hydrocarbons during the growth of the lattice. Corannulene, the archetype of such non-planar polyaromatic hydrocarbons, can act as an ideal wrinkling motif in 2D carbon nanostructures. Herein we report an electrochemical bottom-up method to obtain egg-box shaped nanographene structures through a polycondensation of corannulene that produces a new conducting layered material. Characterization of this new polymeric material by electrochemistry, spectroscopy, electron microscopy (SEM and TEM), scanning probe microscopy, and laser desorption-ionization time of flight mass spectrometry provides strong evidence that the anodic polymerization of corannulene, combined with electrochemically induced oxidative cyclodehydrogenations (Scholl reactions), leads to polycorannulene with a wavy graphene-like structure.

Protection against proteolysis of a targeting peptide on gold nanostructures.

Cell targeting has been considered an important strategy in diagnostic and therapeutic applications. Among different targeting units, peptides have emerged for their ability to bind to many different cellular targets, their scarce immunogenicity and the possibility of introducing multiple copies on nanosystems, providing high avidity for the target. However, their sensitivity to proteases strongly limits their applications in vivo. Here, we show that when presented on the surface of nanostructures, peptide stability to proteolysis is strongly improved without reducing the targeting activity. We prepared plasmonic nanostructures functionalized with a dodecapeptide (GE11) which targets EGFR, a protein overexpressed on different types of tumors. Two types of nanosystems were prepared in which the targeting unit was either directly linked to gold nanoparticles or through a PEG chain, resulting in a different peptide density on the surface of nanostructures. The peptide was rapidly degraded in 20% human serum or in the presence of isolated serine proteases, whereas no significant proteolytic fragments were detected during incubation of the nanosystems and after 24 h digestion, the nanostructures maintained their targeting activity and selectivity on colon cancer cells. Molecular dynamic calculations of the interaction of the nanostructure with chymotrypsin suggest that the formation of the enzyme-peptide complex, the first step in the mechanism of peptide hydrolysis, is highly unlikely because of the constraint imposed by the link of the peptide to the nanoparticle. These results support the utilization of peptides as active targeting units in nanomedicine.

Nanoparticles Engineering by Pulsed Laser Ablation in Liquids: Concepts and Applications.

Laser synthesis emerges as a suitable technique to produce ligand-free nanoparticles, alloys and functionalized nanomaterials for catalysis, imaging, biomedicine, energy and environmental applications. In the last decade, laser ablation and nanoparticle generation in liquids has proven to be a unique and efficient technique to generate, excite, fragment and conjugate a large variety of nanostructures in a scalable and clean way. In this work, we give an overview on the fundamentals of pulsed laser synthesis of nanocolloids and new information about its scalability towards selected applications. Biomedicine, catalysis and sensing are the application areas mainly discussed in this review, highlighting advantages of laser-synthesized nanoparticles for these types of applications and, once partially resolved, the limitations to the technique for large-scale applications.

Spotting aged dyes on paper with SERS.

Surface enhanced Raman spectroscopy (SERS) is a highly sensitive technique for the non- or minimally invasive identification of molecules at very low concentrations. In this work, SERS is exploited using naked laser-ablated gold nanoparticles (AuNPs) for the detection of dyes on artificially aged paper inked with a ballpoint pen. Although several studies on inks with SERS are present in the literature, most of them report on the investigations on freshly prepared products, and less information is present on the detection of aged dyes and inks using SERS. Ballpoint inks are commonly used in daily activities, but have also been employed by several contemporary artists. These inks are very sensitive to light, and they discolor rapidly, making their detection demanding. In the present work, the SERS spectra of a ballpoint pen ink on two types of paper were analyzed after light-induced ageing, and the importance of the dye-AuNP interaction is discussed. The results show that the interpretation of the SERS spectra of the aged samples, such as those of interest in the Cultural Heritage field, is a tricky and delicate operation and that the diffusion of the dyes to the hot spot regions of the plasmonic nanoparticles plays a pivotal role in the detection of degraded ink components. Therefore, appropriate evaluation of the factors affecting the molecule-plasmonic nanoparticle interactions and of the history of the artwork to be analyzed is fundamental to avoiding the misinterpretation of the spectra and, consequently, of the original composition of the analyzed artwork.

SERRS multiplexing with multivalent nanostructures for the identification and enumeration of epithelial and mesenchymal cells.

Liquid biopsy represents a new frontier of cancer diagnosis and prognosis, which allows the isolation of tumor cells released in the blood stream. The extremely low abundance of these cells needs appropriate methodologies for their identification and enumeration. Herein we present a new protocol based on surface enhanced resonance Raman scattering (SERRS) gold multivalent nanostructures to identify and enumerate tumor cells with epithelial and mesenchimal markers. The validation of the protocol is obtained with spiked samples of peripheral blood mononuclear cells (PBMC). Gold nanostructures are functionalized with SERRS labels and with antibodies to link the tumor cells. Three types of such nanosystems were simultaneously used and the protocol allows obtaining the identification of all individual tumor cells with the help of a Random Forest ensemble learning method.

Surface Enhanced Raman Spectroscopy for Quantitative Analysis: Results of a Large-Scale European Multi-Instrument Interlaboratory Study.

Surface-enhanced Raman scattering (SERS) is a powerful and sensitive technique for the detection of fingerprint signals of molecules and for the investigation of a series of surface chemical reactions. Many studies introduced quantitative applications of SERS in various fields, and several SERS methods have been implemented for each specific application, ranging in performance characteristics, analytes used, instruments, and analytical matrices. In general, very few methods have been validated according to international guidelines. As a consequence, the application of SERS in highly regulated environments is still considered risky, and the perception of a poorly reproducible and insufficiently robust analytical technique has persistently retarded its routine implementation. Collaborative trials are a type of interlaboratory study (ILS) frequently performed to ascertain the quality of a single analytical method. The idea of an ILS of quantification with SERS arose within the framework of Working Group 1 (WG1) of the EU COST Action BM1401 Raman4Clinics in an effort to overcome the problematic perception of quantitative SERS methods. Here, we report the first interlaboratory SERS study ever conducted, involving 15 laboratories and 44 researchers. In this study, we tried to define a methodology to assess the reproducibility and trueness of a quantitative SERS method and to compare different methods. In our opinion, this is a first important step toward a "standardization" process of SERS protocols, not proposed by a single laboratory but by a larger community.

Graphite-Based Geothermometry on Almahata Sitta Ureilitic Meteorites.

The thermal history of carbon phases, including graphite and diamond, in the ureilite meteorites has implications for the formation, igneous evolution, and impact disruption of their parent body early in the history of the Solar System. Geothermometry data were obtained by micro-Raman spectroscopy on graphite in Almahata Sitta (AhS) ureilites AhS 72, AhS 209b and AhS A135A from the University of Khartoum collection. In these samples, graphite shows G-band peak centers between 1578 and 1585 cm-1 and the full width at half maximum values correspond to a crystallization temperature of 1266 °C for graphite for AhS 209b, 1242 °C for AhS 72, and 1332 °C for AhS A135A. Recent work on AhS 72 and AhS 209b has shown graphite associated with nanodiamonds and argued that this assemblage formed due to an impact-event. Our samples show disordered graphite with a crystalline domain size ranging between about 70 and 140 nm. The nanometric grain-size of the recrystallized graphite indicates that it records a shock event and thus argues that the temperatures we obtained are related to such an event, rather than the primary igneous processing of the ureilite parent body.

PreS1 peptide-functionalized gold nanostructures with SERRS tags for efficient liver cancer cell targeting.

Early detection is the most effective mean of improving prognosis for many fatal diseases such as cancer. In this context, the Surface Enhanced Resonance Raman Scattering (SERRS) technique is being proposed as alternative to fluorescent methods in detection of biomarkers, because SERRS nanostructures are bright as fluorescent tags but more stable and clearly detectable using the narrow Raman "fingerprints" of a suitable reporter. Here we show that biocompatible SERRS active gold nanostructures, functionalized with an engineered PreS1 peptide (AuNP@PEG-PreS1), detect the presence of the SerpinB3 antigen overexpressed on liver tumor cells, a biomarker of the onset of liver cell carcinomatous transformation. A proper engineering of the targeting unit, linked to the nanostructure by a polymer chain, affords a sensitivity and specificity larger than 80%, at subnanomolar concentrations. Taking into account the high sensitivity of SERRS and that SB3 overexpression is an early event in liver cell carcinomatous transformation, AuNP@PEG-PreS1 nanostructures could be used in routine diagnostic activities, to improve the accuracy of HCC detection in particular in patients with chronic liver diseases.

Predictions on the SERS enhancement factor of gold nanosphere aggregate samples.

Colloidal gold nanostructures are nowadays widely involved in sensor applications. One of the most interesting techniques that takes advantage of them is certainly the Surface Enhanced Raman Scattering (SERS) effect, even if it is often considered a tricky technique due to structural constraints required by the nanostructured substrates to obtain high enhancement factors (EFs), i.e. the presence of hot spots. Because of the easy preparation and high number of hot spots, aggregated gold nanospheres seem to be the most efficient through the SERS colloids, but their characteristic high disorder makes them unpredictable and difficult to compare between different batches. For this reason, less SERS effective, but more regular and organized substrates are usually preferred. In this study, a method based on Boundary Element Method (BEM) simulation is used to accurately predict the colloidal SERS EFs of gold nanoparticle (AuNP) aggregates, starting from their experimental extinction spectra. Surprisingly, it was found that larger aggregates do not exhibit stronger hot spots, but rather higher amounts of them, influencing the overall predicted EFs, which well reflect the results obtained experimentally.

Thiolated Graphene Oxide Nanoribbons as Templates for Anchoring Gold Nanoparticles: Two-Dimensional Nanostructures for SERS.

Graphene oxide nanoribbons (GONRs), obtained from the oxidative unzipping of carbon nanotubes, have been investigated as building blocks towards reaching active platforms in surface-enhanced Raman scattering (SERS). The complete development of carbon nanomaterials is strongly related to the exploitation of their chemical versatility, so this work is focused on the positive effect that a specific chemical functionalization provides to the SERS effect when gold nanoparticles are used. The covalent derivatization of GONRs with terminal thiol groups boosts their interaction with different types of gold nanoparticles (namely, 'naked' or citrate-stabilized), and the resulting two-dimensional aggregates show an intense enhancement of the Raman scattering from the carbon nanostructures because of their two-dimensional extended aggregation pattern. The SERS effect has been corroborated by theoretical calculations and a conceptual proof of SERS-based sensing.

A surface enhanced Raman scattering based colloid nanosensor for developing therapeutic drug monitoring.

Competitive reactions, on the surface of plasmonic nanostructures, allow exploiting SERS signals for quantitative Therapeutic Drug Monitoring. As an example, the concentration of Erlotinib, an anti-EGFR small molecule, used for the treatment of non-small cell lung and pancreatic cancer, is determined. The numerous side effects and the variability of patient responses make Erlotinib a good candidate for monitoring. The new SERS based sensor can estimate Erlotinib down to nanomolar concentration and is based on the chemical reaction of the drug and of a competitor SERS reporter on the surface of gold nanostructures. Colloid solutions of naked gold nanoparticles obtained by laser ablation in solution were used for obtaining nanostructures with very efficient hot spots for SERS and with a clean surface for chemistry. Detection of the drug in the nanomolar concentration range is shown to be possible also in spiked plasma samples.

Manipulating chemistry through nanoparticle morphology.

We demonstrate that the protonation chemistry of molecules adsorbed at nanometer distances from the surface of anisotropic gold nanoparticles can be manipulated through the effect of surface morphology on the local proton density of an organic coating. Direct evidence of this remarkable effect was obtained by monitoring surface-enhanced Raman scattering (SERS) from mercaptobenzoic acid and 4-aminobenzenethiol molecules adsorbed on gold nanostars. By smoothing the initially sharp nanostar tips through a mild thermal treatment, changes were induced on protonation of the molecules, which can be observed through changes in the measured SERS spectra. These results shed light on the local chemical environment near anisotropic colloidal nanoparticles and open an alternative avenue to actively control chemistry through surface morphology.