RESUMO
The Oxygen Evolution Reaction (OER) is crucial in various processes such as hydrogen production via water splitting. Several electrocatalysts, including metal oxides, have been evaluated to enhance the reaction efficiency. Zeolitic Imidazolate Framework-67 (ZIF-67) has been employed as a precursor to produce Co3O4, showing high OER activity. Additionally, the formation of composites with carbon-based materials improves the activity of these materials. Thus, this work focuses on synthesizing ZIF-67 and commercial activated carbon (AC) composites, which were used as precursors to obtain Co3O4/C electrocatalysts by calculating ZIF-67/CX (X = 10, 30, and 50, the mass percentage of AC). The obtained materials were thoroughly characterized by employing X-ray powder diffraction (XRD), confirming the cobalt oxide structure with a sphere-like morphology as observed in the TEM images. The presence of oxygen vacancies was confirmed by infrared spectroscopy and EPR measurements. The electrocatalytic performance in the OER was investigated by linear sweep voltammetry (LSV), which revealed an overpotential of 325 mV at 10 mA cm-2 and a Tafel slope value of 65.32 mV dec-1 for Co3O4/C10, superior in activity to several previously reported studies in the literature and electrochemical stability of up to 8 hours. The reduced value of charge transfer resistance, high double-layer capacitance, and the presence of Co3+ ions justify the superior performance of the Co3O4/C10 electrocatalyst.
RESUMO
The impact of Eu3+ doping at the Sr2+ and Sn4+ sites in SrSnO3 on its structural and electronic properties was studied and correlated with the photocatalytic efficiency. The compounds were synthesized using a modified Pechini method. Refinement of the synchrotron X-ray diffraction (S-XRD) data showed that the samples had an orthorhombic Pbnm symmetry. The incorporation of Eu into the lattice led to increased short- and long-range disorder, inducing additional distortion in the SnO6. XANES measurements revealed that mixed Eu valences (Eu3+ and Eu2+) were present in Eu-doped samples, and DFT calculations confirmed the presence of these ions at Sr2+/Sr4+ sites in the SrSnO3, resulting in changes in the electronic behavior. The catalytic performance toward Remazol yellow dye photodegradation and the catalysts' surface properties were also evaluated. The catalytic efficiency followed the order of Sr(Sn0.99Eu0.01)SnO3 > (Sr0.99Eu0.01)SnO3 > SrSnO3. The order was clearly related to selected-site doping that changed the degree of the inter- and intraoctahedral distortion and the introduction of different Eu midgap states, which apparently favor charge separation upon photoexcitation during photocatalysis. The results shown here are of great importance to the functionalization of SrSnO3 and other perovskite materials by lanthanoid ions, especially Eu3+, for effective applications as photocatalysts.
RESUMO
In this work we synthesized BaTaO2N and SrTaO2N using a two-step high-temperature solid-state reaction method and analysed the structural distortions, relative to the ideal cubic perovskite structure, according to group theory. From a complete distortion analysis/refinement using high-resolution neutron diffraction data in the temperature range 8 to 613â K, we identified tetragonal structures for BaTaO2N [P4/mmm (No. 123)] and SrTaO2N [I4/mcm (No. 140)]. In contrast to an anion-disordered cubic perovskite (Pm \overline{3}m No. 221) with Ta at the cell center, both systems show a site preference for oxygen anions in the two opposite corners (along the c axis) of the Ta-O/N octahedra rather than the four square corners in the ab plane (Γ3+ occupancy distortion), which induces a tetragonal elongation of the unit cell with the c axis being longer than the a axis. A further Ta-O/N octahedra displacement [R5-(a,0,0), rotation about the c axis] distortion was observed in SrTaO2N. This distortion mode is accompanied by an increased unit-cell distortion that decreases as the temperature increases. Ultimately a second-order phase transition caused by the loss of the R5-(a,0,0) mode was observed at 400-450â K.
RESUMO
The temperature dependences of the structures of three polytypes of BaRuO3 have been investigated between room temperature and 1000 °C using high resolution synchrotron X-ray diffraction. The structural studies reveal a systematic decrease of the Ru-Ru distance as the pressure required to prepare the polytype increases. The O-O distance across the shared face increases as the Ru-Ru separation decreases. The 9R and 4H polytypes undergo unexceptional changes with increasing temperature. In 6H-BaRuO3 there is an apparent increase in the Ru-Ru interaction at around 650 °C and a concurrent reduction in the O-O distance, indicating an anomalous strengthening of the Ru-Ru interactions upon heating.