Advancing Solid Oxide Fuel Cell Performance: Enhanced Electrochemical Properties of Pr1-xCaxBaFe2O5+δ Nanofiber Cathodes via Ca Doping.

The double perovskite oxide PrBaFe2O5+δ has great potential as a cathode material for solid oxide fuel cells (SOFCs). However, the electrochemical characteristics of Fe-based double perovskites are relatively inferior. To improve its electrochemical performance, Ca is investigated to partially replace Pr, forming Pr1-xCaxBaFe2O5+δ (PCBFx, x = 0.0-0.3) by an electrospinning technique. The PCBFx nanofibers exhibited a crystalline structure characterized by orthorhombic symmetry and space group P4/mmm. Furthermore, these PCBFx nanofibers displayed exceptional chemical compatibility with the Sm0.2Ce0.8O1.95 (SDC) electrolyte when sintered at a temperature of 900 °C for 5 h. The X-ray photoelectron spectroscopy (XPS) analysis reveals a progressive increase in the Fe4+ concentration as the Ca doping level rises. The polarization resistances (Rp) of the PCBF00, PCBF01, PCBF02, and PCBF03 nanofiber cathodes were 0.103, 0.079, 0.056, and 0.048 Ω cm2 at 750 °C. In the meantime, doping Ca increases the peak power density of the single cell by 46%, from 762.80 (PCBF00) to 1114.85 (PCBF03) mW cm-2 at 750 °C. The results demonstrate that PCBF03 double perovskite nanofibers exhibit great potential as cathode materials for SOFCs.

Parameter Identification of Multispan Rigid Frames Using a Stiffness Separation Method.

Identifying the parameters of multispan rigid frames is challenging because of their complex structures and large computational workloads. This paper presents a stiffness separation method for the static response parameter identification of multispan rigid frames. The stiffness separation method segments the global stiffness matrix of the overall structure into the stiffness matrices of its substructures, which are to be computed, thereby reducing the computational workload and improving the efficiency of parameter identification. Loads can be applied individually to each separate substructure, thereby guaranteeing obvious local static responses. The veracity and efficacy of the proposed methodology are substantiated by applying it to three- and eight-span continuous rigid frame structures. The findings indicate that the proposed approach significantly enhances the efficiency of parameter identification for multispan rigid frames.

Bioinformatics analysis for the identification of Sprouty-related EVH1 domain-containing protein 3 expression and its clinical significance in thyroid carcinoma.

The poorly differentiated thyroid carcinoma (THCA) subtype is associated with an aggressive disease course, a less favorable overall prognosis, and an increased risk of distant organ metastasis. In this study, our objective was to explore the potential utility of the Sprouty-related EVH1 domain-containing protein 3 (SPRED3) as a biomarker for early diagnosis and prognosis in THCA patients. The differentially expressed prognostic-related genes associated with THCA were identified by querying The Cancer Genome Atlas (TCGA) database. The difference in the expression of the SPRED3 gene between thyroid carcinoma (THCA) tissues and normal tissues was analyzed using data from The Cancer Genome Atlas (TCGA) and further validated through immunohistochemistry. Univariate and multivariate Cox regression models were used, along with clinical information from THCA patients, to analyze the prognostic value of the SPRED3 gene in THCA patients. Functional enrichment analysis was subsequently performed to elucidate the molecular mechanisms underlying the regulatory effects of the SPRED3 gene on thyroid carcinoma. Additionally, we calculated the percentage of infiltrating immune cells in THCA patients and evaluated their correlation with SPRED3 gene expression. Compared with those in noncancerous thyroid tissue, the gene and protein expression levels of SPRED3 were found to be elevated in thyroid carcinoma tissues. Furthermore, the expression of SPRED3 in thyroid carcinoma exhibited significant correlations with tumor location, histological grade, pathological stage, and tumor node metastasis classification (TNM) stage. Univariate and multivariate Cox proportional hazards (Cox) regression analyses demonstrated that SPRED3 could serve as an independent prognostic factor for predicting the overall survival of THCA patients. The results of functional enrichment analysis suggested the potential involvement of SPRED3 in the regulation of extracellular matrix organization, epidermal development, signaling receptor activator activity, skin development, receptor ligand activity, glycosaminoglycan binding, neuroactive ligand‒receptor interaction, the IL-17 signaling pathway, and the PI3K-Akt signaling pathway. Additionally, there were significant correlations between the expression level of the SPRED3 gene and the infiltration of various immune cells (eosinophils, central memory T cells, neutrophils, macrophages, and NK cells) within the thyroid tumor microenvironment. SPRED3 can be used as a prognostic biomarker in patients with THCA could potentially be therapeutic target for THCA.

Bioinspired Hollow/Hollow Architecture with Flourishing Dielectric Properties for Efficient Electromagnetic Energy Reclamation Device.

The exploitation of advanced electromagnetic functional devices is perceived as the effective prescription to deal with environmental contamination and energy deficiency. From the perspective of observing and imitating nature, pine branch-like zirconium dioxide/cobalt nanotubes@nitrogen-doped carbon nanotubes are synthesized victoriously through maneuverable electrospinning process and follow-up thermal treatments. In particular, introducing carbon nanotubes on the surface of hollow nanofibers to construct hierarchical architecture vastly promoted the material's dielectric properties by significantly augmenting specific surface area, generating abundant heterogeneous interfaces, and inducing the formation of defects. Supplemented by the synergistic effect between each constituent, ultra-strong attenuation capacity and perfect impedance matching characteristics are implemented simultaneously, and jointly made contributions to the splendid microwave absorption performance with a minimum reflection loss of -67.9 dB at 1.5 mm. Moreover, this fibrous absorber also exhibited promising potential to be utilized as a green and efficient electromagnetic interference shielding material when the filler loading is enhanced. Therefore, this design philosophy is destined to inspire the future development of energy conversion and storage devices, and provide theoretical direction for the creation of sophisticated electromagnetic functional materials.

Comparing the Effects of Static Stretching Alone and in Combination with Post-Activation Performance Enhancement on Squat Jump Performance at Different Knee Starting Angles.

We aimed to investigate the impact of isolated static stretching (4 sets of 30 seconds) and its combined form with 10 repetitive drop jumps on lower limb performance during squat jumps at different knee joint starting angles (60°, 90°, and 120°). Thirteen participants completed three randomly ordered experimental visits, each including a standardized warm-up and squat jumps at three angles, apart from the intervention or control. Information was gathered through a three-dimensional movement tracking system, electromyography system, and force platform. The electromyography data underwent wavelet analysis to compute the energy values across the four wavelet frequency bands. The average power (Pavg), peak power (Ppeak), peak ground reaction force (GRFpeak), peak center of mass velocity (Vpeak), and force-velocity relationship at peak power (SFv) were extracted from the force and velocity-time data. The results revealed no significant influence of isolated static stretching, or its combined form with drop jumps, on the energy values across the frequency bands of the gastrocnemius, biceps femoris and rectus femoris, or the Pavg or Ppeak (P > 0.05). However, at 120°, static stretching reduced the GRFpeak (P = 0.001, d = 0.86) and SFv (P < 0.001, d = 1.12), and increased the Vpeak (P = 0.001, d = 0.5). The GRFpeak, Pavg, Ppeak, and SFv increased with an increase in the joint angle (P < 0.05), whereas the Vpeak decreased (P < 0.05). These findings suggest that static stretching does not diminish power output during squat jumps at the three angles; however, it alters GRFpeak, Vpeak, and the relative contributions of force and velocity to peak power at 120°, which can be eliminated by post-activation performance enhancement. Moreover, compared to 60° and 90°, 120° was more favorable for power and peak force output.

Illuminating plant-microbe interaction: How photoperiod affects rhizosphere and pollutant removal in constructed wetland?

Rhizosphere is a crucial area in comprehending the interaction between plants and microorganisms in constructed wetlands (CWs). However, influence of photoperiod, a key factor that regulates photosynthesis and rhizosphere microbial activity, remains largely unknown. This study investigated the effect of photoperiod (9, 12, 15 h/day) on pollutant removal and underlying mechanisms. Results showed that 15-hour photoperiod treatment exhibited the highest removal efficiencies for COD (87.26%), TN (63.32%), and NO3--N (97.79%). This treatment enhanced photosynthetic pigmentation and root activity, which increased transport of oxygen and soluble organic carbon to rhizosphere, thus promoting microbial nitrification and denitrification. Microbial community analysis revealed a more stable co-occurrence network due to increased complexity and aggregation in the 15-hour photoperiod treatment. Phaselicystis was identified as a key connector, which was responsible for transferring necessary carbon sources, ATP, and electron donors that supported and optimized nitrogen metabolism in the CWs. Structural equation model analysis emphasized the importance of plant-microbe interactions in pollutant removal through increased substance, information, and energy exchange. These findings offer valuable insights for CWs design and operation in various latitudes and rural areas for small-scale decentralized systems.

Exploring the resilience of constructed wetlands to harmful algal blooms disturbances: A study on microbial response mechanisms.

Constructed wetlands (CWs) have emerged as a promising environmentally sustainable technique for wastewater treatment. However, the susceptibility of CWs to disturbances caused by harmful algal blooms (HABs) raises concerns. This study aimed to investigate the impact of HABs on the pollutants' removal performance of CWs and the response of rhizosphere microbial community. Results revealed that CWs possessed an adaptive capacity that enabled them to recover caused by HABs. The rhizosphere was found to stimulate the occurrence of Acinetobacter, which played a critical role to help resist HABs disturbance. This study also observed an increased dissimilatory nitrate reduction metabolic pathway which promoted denitrification and enhanced the nitrogen removal efficiency of CWs. Additionally, the structural equation model further suggested that dissolved oxygen exerted a significant influence on the microbial activities and then affected the pollutants removal performance. Overall, our findings shed light on the mechanism for CW stability maintenance during HABs disturbance.

Gender Differences in Lower Extremity Stiffness during a Single-Leg Landing Motion in Badminton.

In general, at the same level of exercise, female athletes are three to six times more likely to injure an anterior cruciate ligament (ACL) than male athletes. Female athletes also had higher rates of ACL injury than males in a single-leg landing task after a backcourt backhand side overhead stroke in badminton. In many previous studies, stiffness of the musculoskeletal system in the lower limbs has been reported as a potential factor contributing to differences in ACL injury rates between genders. The purpose of this study was to describe the differences between genders in leg and knee stiffness in male and female athletes during a single-leg landing action after the backhand side overhead shot in the backcourt. Eight male athletes and eight female athletes participated in this test. Leg stiffness and knee stiffness were calculated separately for male and female athletes during the landing phase. The results showed that both absolute and normalized leg stiffness were lower in female athletes than in male athletes (p < 0.05). And both absolute and normalized knee stiffness were also lower than male athletes (p < 0.05). The low leg stiffness and knee stiffness demonstrated by females in this single-leg drop task compared to male athletes may indicate that females have lower dynamic leg stability than males during the drop, which may lead to hypermobility of the knee joint and may put females at a higher risk of injury in this high-risk maneuver for non-contact cruciate ligament injuries.

Research for accurate auxiliary diagnosis of lung cancer based on intracellular fluorescent fingerprint information.

The distinctions in pathological types and genetic subtypes of lung cancer have a direct impact on the choice of treatment choices and clinical prognosis in clinical practice. This study used pathological histological sections of surgically removed or biopsied tumor tissue from 36 patients. Based on a small sample size, millions of spectral data points were extracted to investigate the feasibility of employing intracellular fluorescent fingerprint information to diagnose the pathological types and mutational status of lung cancer. The intracellular fluorescent fingerprint information revealed the EGFR gene mutation characteristics in lung cancer, and the area under the curve (AUC) value for the optimal model was 0.98. For the classification of lung cancer pathological types, the macro average AUC value for the ensemble-learning model was 0.97. Our research contributes new idea for pathological diagnosis of lung cancer and offers a quick, easy, and accurate auxiliary diagnostic approach.

Imbedding Pd Nanoparticles into Porous In2O3 Structure for Enhanced Low-Concentration Methane Sensing.

Methane (CH4), as the main component of natural gas and coal mine gas, is widely used in daily life and industrial processes and its leakage always causes undesirable misadventures. Thus, the rapid detection of low concentration methane is quite necessary. However, due to its robust chemical stability resulting from the strong tetrahedral-symmetry structure, the methane molecules are usually chemically inert to the sensing layers in detectors, making the rapid and efficient alert a big challenge. In this work, palladium nanoparticles (Pd NPs) embedded indium oxide porous hollow tubes (In2O3 PHTs) were successfully synthesized using Pd@MIL-68 (In) MOFs as precursors. All In2O3-based samples derived from Pd@MIL-68 (In) MOFs inherited the morphology of the precursors and exhibited the feature of hexagonal hollow tubes with porous architecture. The gas-sensing performances to 5000 ppm CH4 were evaluated and it was found that Pd@In2O3-2 gave the best response (Ra/Rg = 23.2) at 370 °C, which was 15.5 times higher than that of pristine-In2O3 sensors. In addition, the sensing materials also showed superior selectivity against interfering gases and a rather short response/recovery time of 7 s/5 s. The enhancement in sensing performances of Pd@In2O3-2 could be attributed to the large surface area, rich porosity, abundant oxygen vacancies and the catalytic function of Pd NPs.

Succession dynamics of microbial communities responding to the exogenous microalgae ZM-5 and analysis of the environmental sustainability of a constructed wetland system.

Constructed wetlands (CWs) are economical and effective swine tailwater treatment systems. However, nitrogen removal in CWs is limited by the lack of carbon source for denitrification. In this study, we studied the feasibility of dosing the microalgae ZM-5 to improve the nitrogen removal ability in CWs. Compared to the control CW, a 20 % higher removal capacity of COD and TN was observed for the coupled system (EG). The microalgae ZM-5 could interact with denitrifying bacteria to compensate for the deficiency of denitrifying stage in CWs. HT-qPCR chip analysis also provided evidence that denitrification genes significantly increased (p < 0.05). According to the life cycle assessment (LCA), ultrasonic extraction had the best environmental sustainability among four lipid extraction processes. As an improvement strategy, clean energy could be utilized to optimize the electricity source to reduce environmental load (45 %-60 %). These findings offer new insights into the feasibility of EG for environmentally sustainable wastewater treatment.

A novel synthesis of Porous Fe4N/carbon hollow microspheres for thin and efficient electromagnetic wave absorbers.

Modulating the structure and morphology is essential in fabricating high-performance electromagnetic absorbing materials. Herein, we obtained porous Fe3O4/carbon hollow microspheres and porous Fe4N/carbon hollow microspheres derived from Fe-glycerol hollow microspheres. Through structure and morphology analysis, we proved the existence of porous and hollow features. By comparison, it can be found that the porous Fe4N/carbon hollow microspheres have electromagnetic wave absorption performance superior to that of porous Fe3O4/carbon hollow microspheres. The reflection loss value of porous Fe4N/carbon hollow microspheres reaches -42.2 dB at a matching thickness of merely 1.4 mm, and its effective absorbing bandwidth approaches 4.5 GHz, whereas the reflection loss of porous Fe3O4/carbon hollow microspheres in the 2-18 GHz range is over -10 dB. Reasons for the better electromagnetic wave absorption performance are revealed to be that the magnetic Fe4N has higher complex permittivity and complex permeability, and the porous hollow microspherical structure increases the multiple scattering and reflection of electromagnetic waves. Meanwhile, the impedance matching and attenuation constant are optimized together through the synergy of dielectric and magnetic loss. This research can provide instructive findings for thin-thickness electromagnetic wave absorbing materials based on Fe4N with an appropriate microstructure.

Endoscopic fenestration combined with catheterization in the treatment of a giant colonic fecalith causing bowel obstruction: a case report.

Obstruction of the colon caused by a fecalith is not a rare condition, but endoscopic attempts at removal of the fecalith are often unsuccessful because of the size of the fecalith and its extremely hard stone-like consistency. We report a case of bowel obstruction of over two weeks' duration caused by a giant colonic fecalith. Conservative treatments including insertion of a gastric tube and enemas failed to resolve the obstruction. After an initial unsuccessful attempt at fecalith removal by colonoscopy using a snare, we successfully resolved the bowel obstruction over the course of subsequent colonoscopies with endoscopic fenestration of the fecalith and placement of a transrectal gastric tube for directed instillation of the enema fluid, and we were able to avoid surgical intervention in this case.

Three-dimensional porous manganese oxide/nickel/carbon microspheres as high-performance electromagnetic wave absorbers with superb photothermal property.

Regulating electromagnetic parameters and thus improving impedance matching characteristics by multi-component design is regarded as a prospective approach to obtain highly efficient electromagnetic wave absorption materials. Whereas, it is still challenging to fabricate microwave absorbers with strong absorption capacity and durability in harsh conditions. Based on the above considerations, three-dimensional porous multi-functional manganese oxide/nickel/carbon microspheres had been designed and prepared through a combined approach of facile solvothermal reactions and subsequent carbonization processes. The textural characteristic examinations demonstrated that, numerous manganese oxide and Ni nanoparticles of 15-20 nm in diameter were well dispersed in the carbon-based microspheres of approximately 0.8-1 µm in size. Microwave absorption property evaluation indicated that the minimum reflection loss reached up to -53.6 dB at 9.5 GHz, and effective absorption bandwidth of 3.7 GHz was achieved at matching thickness of merely 2.0 mm. The electromagnetic wave attenuation mechanisms analysis displayed that excellent impedance matching and various dissipation pathways, including magnetic loss, interfacial and dipole polarization relaxation synergistically contributed to the high microwave absorption performances of the porous composites. Radar cross-sectional simulation and photothermal measurements verified that the materials were supposed to have promising foregrounds in complicated circumstances.

Heterogeneous Cu9S5/C nanocomposite fibers with adjustable electromagnetic parameters for efficient electromagnetic absorption.

One-dimensional carbon-based materials have emerged as promising electromagnetic wave absorption agents due to their outstanding conductivity, high stability, low weight, and easy availability. Properly optimizing their electromagnetic parameters is expected to further enhance the electromagnetic wave attenuation capacity. In this work, efficient Cu9S5/C nanocomposite fibers are prepared by a combined approach of electrospinning and subsequent carbonization-sulfurization processes. The Cu9S5 nanoparticles with size of ca. 100-200 nm were homogeneously embedded in fibrous carbon matrix with diameter of 300 nm. For electromagnetic wave absorption, the optimized composited nanofibers (Cu9S5/C-3) exhibited an extremely superb reflection loss of -65.4 dB (9.5 GHz, 2.7 mm) at a lower mass fraction (20 wt%). And the effective absorption bandwidth could be up to 4.1 GHz (8.0-12.1 GHz) with a matching thickness of 2.9 mm, covering the whole X-band. Electromagnetic wave attenuation mechanism investigation revealed that the performance enhancement originated from the synergy of various loss pathways, including interfacial polarization, dipole polarization, and conductive loss. The unique hierarchical structure from particle embedding, one-dimensional fiber, to three-dimensional network further amplified the performance advantages of each component. This work is anticipated to provide a feasible strategy to synthesize sulfide/carbon binary composite fibers for efficient electromagnetic wave absorption.

circXRCC5 foster gastric cancer growth and metastasis by the HNRNPC/circXRCC5/miR-655-3p/RREB1/UBA2 positive feedback loop.

Gastric cancer (GC) is one of the most common malignancies, leading to millions of deaths each year. Here, we investigated the molecular mechanisms of GC, with a focus on circXRCC5/miR-655-3p/RREB1/UBA2 axis. circXRCC5 was identified in 62 paired cancer specimens and adjacent normal tissues by genome-wide bioinformatics analysis and verified by qRT-PCR and Sanger sequencing. Knockdown or exogenous expression of circXRCC5 was performed to validate the functional significance of circXRCC5 using both in vitro and in vivo assays, including CCK-8, colony formation, EdU incorporation, transwell system, as well as animal experiments. RNA immunoprecipitation, biotinylated RNA pull-down, ChIP, and dual-luciferase assays were employed to validate the regulatory network of circXRCC5/miR-655-3p/RREB1/UBA2. Frequently elevated circXRCC5 in GC tissues and cell lines was associated with poor prognosis of GC patients. Functionally, circXRCC5 overexpression facilitated GC cell proliferation, migration, and invasion, as well as promoted tumor growth and metastasis in vivo. Mechanistically, circXRCC5 served as a sponge of miR-655-3p to induce upregulation of RREB1. RREB1 was identified as a transcriptional activator of UBA2, thus contributing to GC tumorigenesis. Moreover, RNA binding protein (RBP) HNRNPC was proved to interact with circXRCC5 to promote circXRCC5 biogenesis. Collectively, circXRCC5 facilitates GC progression through the HNRNPC/circXRCC5/miR-655-3p/RREB1/UBA2 axis, which might bring novel therapeutic strategies for GC treatment.

Design, synthesis, and biological evaluation of C-8 modified curcumol derivatives against colorectal cancer cell lines.

A series of structurally modified curcumol derivatives at C-8 position were designed and synthesized, whose structures were confirmed by 1H NMR,13C NMR, and HRMS analysis. The tested compounds were evaluated for in vitro antitumor activity against colorectal cancer cell lines SW620, HCT116, and CaCo2. Many of the tested candidates exhibited higher inhibition efficiency than curcumol. Among them, compound 3 l shows the best inhibitory effect on the viability of SW620 with IC50 value of 19.90 ± 0.64 µM. The structure-activity relationships of these derivatives were discussed, which showed that the introduction of amino or aryl groups tended to increase the anti-cancer activity. In addition, compound 3 l may inhibit cancer cell proliferation through triggering cell apoptosis.

Short-term effects of different PM2.5 ranges on daily all-cause mortality in Jinan, China.

To examine the effects of different PM2.5 concentration ranges on daily all-cause mortality, 8768 all-cause deaths were recorded in the database of the Shandong Provincial Hospital Affiliated to Shandong First Medical University. Data of air pollutants (PM2.5 and O3) concentration were provided by the Jinan Environment Monitoring Center. The relative risk of all-cause mortality was assessed using a quasi-Poisson regression model after adjusting for confounding factors. The concentrations of PM2.5 were divided into four ranges 0-35 µg/m3; 35-75 µg/m3; 75-115 µg/m3; 115-150 µg/m3. There was no significant relationship between PM2.5 exposure and all-cause deaths in individuals aged < 60 years. However, for individuals aged ≥ 60 years, there was a significant positive association between exposure concentrations and all-cause deaths within the ranges 0-35 µg/m3, 35-75 µg/m3, and 115-150 µg/m3 with a mortality increase of 1.07 (1.01, 1.13), 1.03 (1.00, 1.05), and 1.05 (1.01, 1.08), respectively. When the population aged ≥ 60 years was stratified into gender groups, exposure to PM2.5 in the range 0-35 µg/m3 increased the mortality risk in men but not women. All-cause mortality in women, but not men, increased significantly with exposure to PM2.5 in the ranges of 35-75, 75-115, and 115-150 µg/m3.

Single-cell sorting of microalgae and identification of optimal conditions by using response surface methodology coupled with life-cycle approaches.

Response surface methodology (RSM) has been widely used to identify optimal conditions for environmental microorganisms to maximize degrading pollutants and accumulating biomass. However, to date, environmental impact and economic cost have rarely been considered. In this study, a single cell of microalgae Chlorella sorokiniana ZM-5 was sorted, and its enrichment was carried out for the first time. The optimized conditions by RSM for achieving the highest COD, TN, TP removal and 352.61 mg/g lipid production were 24 h light time, 4.3:1C/N, 7.2 pH, and 30 °C temperature, respectively. Life-cycle approaches were then carried out upon this illustrative case, and the results indicated that the implementation of the above optimal conditions could reduce the total environmental impact by 48.0% and the total economic impact by 10.2%. This study showed the feasibility of applying life-cycle approaches to examine the optimal conditions of a biological process in terms of minimizing environmental impact and economic costs.

Design, synthesis, and anticancer activity evaluation of curcumol derivatives.

A new series of C-14 curcumol derivatives as potent anticancer agents were designed and synthesized by click reaction, whose structures were confirmed by 1H NMR,13C NMR, and HRMS analysis. All the synthesized compounds were evaluated for in vitro antitumor activity against colorectal cancer cell lines SW620 and HCT116. Most of them exhibited higher inhibitory activity than curcumol. Especially, compound 3j shows good inhibitory activity against SW620 with IC50 value of 8.10 ± 0.13 µM. The structure-activity relationships (SARs) of these derivatives were discussed. In addition, flow cytometry revealed that compound 3j induced SW620 cells apoptosis by facilitating apoptosis-related proteins expressions. Our findings suggested that fluorine functional group on phenyl ring tended to increase the anticancer activity.