Positive identification through comparative dental analysis in mass disaster: a systematic review and meta-analysis.

PURPOSE: The study aimed to assess the probability of achieving positive identification through comparative dental analysis (CDA) and to determine the factors that influence its success rate in mass disaster scenarios. METHODS: An electronic literature search was conducted across six databases for observational studies that reported both the total number of mass disaster victims and the count of victims identified through CDA alone. A random-effect meta-analysis, using the proportion of victims identified with CDA as the effect size, was conducted alongside subgroup analyses based on the type of disaster (natural or non-natural), the disaster classification (open or closed), and the geographical region (i.e., Europe, Asia). RESULTS: The search yielded 3133 entries, out of which 32 studies were deemed eligible. Most of the studies (96.8%) presented a low risk of bias. The meta-analysis revealed a mean weighted-proportion probability of 0.32, indicating that forensic odontology could identify about one-third of the victims in a mass disaster. The probability of comparative dental identification was three times higher in closed mass disasters compared to open disasters (p < 0.05) and was higher in mass disasters occurring in North America and Europe compared to other regions (p < 0.05). CONCLUSION: The current result suggested that CDA can identify approximately 32% of a victim in a hypothetical scenario, emphasizing the integral role of teeth and forensic odontology in victim identification framework.

Alteration of salivary LPO, MDA, LDH, glutathione, GPx, SOD and vitamins in oral submucous fibrosis: A three-level meta-analysis study.

This study aims to investigate the alteration of salivary biomarker profiling in the development of oral submucous fibrosis (OSMF) and to explore the influence of saliva in the diagnosis of OSMF. A systematic search of published articles using the PRISMA guidelines was conducted to identify relevant studies on OSMF and saliva. All eligible studies, including case-control, cross-sectional studies, cohort, and pilot studies, contained the evaluation of salivary biomarker profiling in patients with OSMF. Salivary biomarker data from 28 selected articles were categorized into nine groups, and their mean values were determined. A three-step meta-analysis was performed by grouping salivary biomarker profiling into more heterogeneous categories based on OSMF classification, considering functional, histological, and clinical grading. The salivary biomarker profiling analysis revealed significant alterations in all markers, indicating their efficacy in OSMF diagnosis. Subgroup analyses highlighted significant associations in oxidative stress and protein with increased mean values, particularly emphasizing lipid peroxidase (LPO), malondialdehyde (MDA), and lactate dehydrogenase (LDH). Conversely, decreased mean values were observed in glutathione, glutathione peroxidase (GPx), superoxide dismutase (SOD), and vitamins. Notably, OSMF grading analysis demonstrated a significant difference in weighted effect sizes for histological grading, particularly in stage IV. The study underscores the alteration of specific salivary biomarkers, particularly those associated with LPO, MDA, LDH, glutathione, GPx, SOD, and vitamins, in diagnosing and grading OSMF.

Dental age estimation in Indonesian adults: An investigation of the maxillary canine pulp-to-tooth volume ratio using cone-beam computed tomography.

Purpose: This study was performed to develop a linear regression model using the pulp-to-tooth volume ratio (PTVR) ratio of the maxillary canine, assessed through cone-beam computed tomography (CBCT) images, to predict chronological age (CA) in Indonesian adults. Materials and Methods: A sample of 99 maxillary canines was collected from patients between 20 and 49.99 years old. These samples were obtained from CBCT scans taken at the Universitas Padjadjaran Dental Hospital in Indonesia between 2018 and 2022. Pulp volume (PV) and tooth volume (TV) were measured using ITK-SNAP, while PTVR was calculated from the PV/TV ratio. Using RStudio, a linear regression was performed to predict CA using PTVR. Additionally, correlation and observer agreement were assessed. Results: The PTVR method demonstrated excellent reproducibility, and a significant correlation was found between the PTVR of the maxillary canine and CA (r=-0.74, P<0.01). The linear regression analysis showed an R2 of 0.58, a root mean square error of 5.85, and a mean absolute error of 4.31. Conclusion: Linear regression using the PTVR can be effectively applied to predict CA in Indonesian adults between 20 and 49.99 years of age. As models of this type can be population-specific, recalibration for each population is encouraged. Additionally, future research should explore the use of other teeth, such as molars.

3D segmentation of dental crown for volumetric age estimation with CBCT imaging.

In adult dental age estimation, segmentation of dental volumetric information from different tooth parts using cone-beam computed tomography (CBCT) has proven beneficial in improving the regression model reliability. This segmentation method can be expanded in the crown part since the volumetric information in the crown is affected by attrition in the enamel and secondary dentine in the dentine and pulp chamber. CBCT scans from 99 patients aged between 20 and 60 were collected retrospectively. A total of 80 eligible teeth for each tooth type were used in this study. The enamel to dentine volume ratio (EDVR), pulp to dentine volume ratio (PDVR) and sex were used as independent variables to predict chronological age (CA). The EDVR was not affected by PDVR. The highest R2 was calculated from the maxillary canine (R2 = 0.6). The current approach in crown segmentation has proven to improve model performance in anterior maxillary teeth.

Regressive changes of crown-root morphology and their volumetric segmentation for adult dental age estimation.

Cone-beam computed tomography (CBCT) enables the assessment of regressive morphological changes in teeth, which can be used to predict chronological age (CA) in adults. As each tooth region is known to have different correlations with CA, this study aimed to segment and quantify the sectional volumes of the tooth crown and root from CBCT scans to test their correlations with the chronological age (CA). Seventy-five CBCT scans from individuals with age between 20 and 60 years were collected retrospectively from an existing database. A total of 192 intact maxillary anterior teeth fulfilled the eligibility criteria. The upper tooth volume ratio (UTVR), lower tooth volume ratio (LTVR), and sex were used as predictor variables. The UTVR and LTVR parameters were both found to be differently correlated to CA and independent from each other. Regression models were derived from each tooth, with the highest R2 being the maxillary lateral incisor (R2  = 0.67). Additional single predictor models using each ratio were capable of reliably predicting the CA. The segmentation approach in volumetric adult dental age estimation proved to be beneficial in enhancing the reliability of the regression model.

CBCT in dental age estimation: A systematic review and meta analysis.

OBJECTIVES: This study aimed to investigate the reproducibility of dental age estimation methods in cone beam computed tomography (CBCT) and the correlation between dental (DA) and chronological (CA) ages. METHODS: The scientific literature was searched in six databases (PubMed, Scopus, LILACS, Web of Science, SciELO, and OATD). Only observational studies were selected. Within each study, the outcomes of interest were (I) the quantified reproducibility of the method (κ statistics and Intraclass correlation coefficient); and (II) the correlation (r) between the dental and chronological ages. A random-effect three-level meta-analysis was conducted alongside moderator analysis based on methods, arch (maxillary/mandibular), population, and number of roots. RESULTS: From 671 studies, 39 fulfilled the inclusion criteria, with one study reporting two different methods. The methods used in the studies were divided into metric (n = 17), volumetric (n = 20), staging (n = 2), and atlas (n = 1). All studies reported high examiner reproducibility. Group 1 (metric and volumetric) provided a high inverse weighted r ([Formula: see text] = -0.71, CI [-0.79,-0.61]), and Group 2 (staging) provided a medium-weighted r ([Formula: see text] = 0.49, CI [0.44, 0.53]). Moderator analysis on Group one did not show statistically significant differences between methods, tooth position, arch, and number of roots. An exception was detected in the analysis based on population (Southeast Asia, [Formula: see text] = -0.89, CI [-0.94,-0.81]). CONCLUSION: There is high evidence that CBCT methods are reproducible and reliable in dental age estimation. Quantitative metric and volumetric analysis demonstrated better performance in predicting chronological age than staging. Future studies exploring population-specific variability for age estimation with metric and volumetric CBCT analysis may prove beneficial.

Effect of Lower Third Molar Segmentations on Automated Tooth Development Staging using a Convolutional Neural Network.

Staging third molar development is commonly used for age estimation in subadults. Automated developmental stage allocation to the mandibular left third molar in panoramic radiographs has been examined in a pilot study. This method used an AlexNet Deep Convolutional Neural Network (CNN) approach to stage lower left third molars, which had been selected by manually drawn bounding boxes around them. This method (bounding box AlexNet = BA) still contained parts of surrounding structures which may have affected the automated stage allocation performance. We hypothesize that segmenting only the third molar could further improve the automated stage allocation performance. Therefore, the current study aimed to determine and validate the effect of lower third molar segmentations on automated tooth development staging. Retrospectively, 400 panoramic radiographs were collected, processed and segmented in three ways: bounding box (BB), rough (RS), and full (FS) tooth segmentation. A DenseNet201 CNN was used for automated stage allocation. Automated staging results were compared with reference stages - allocated by human observers - overall and per stage. FS rendered the best results with a stage allocation accuracy of 0.61, a mean absolute difference of 0.53 stages and a Cohen's linear κ of 0.84. Misallocated stages were mostly neighboring stages, and DenseNet201 rendered better results than AlexNet by increasing the percentage of correctly allocated stages by 3% (BA compared to BB). FS increased the percentage of correctly allocated stages by 7% compared to BB. In conclusion, full tooth segmentation and a DenseNet CNN optimize automated dental stage allocation for age estimation.