RESUMO
Bioinspired soft robotics aims at reproducing the complex hierarchy and architecture of biological tissues within artificial systems to achieve the typical motility and adaptability of living organisms. The development of suitable fabrication approaches to produce monolithic bodies provided with embedded variable morphological and mechanical properties, typically encountered in nature, is still a technological challenge. Here we report on a novel manufacturing approach to produce three-dimensional functionally graded hydrogels (3D-FGHs) provided with a controlled porosity gradient conferring them variable stiffness. 3D-FGHs are fabricated by means of a custom-designed liquid foam templating (LFT) technique, which relies on the inclusion of air bubbles generated by a blowing agent into the monomer-based template solution during ultraviolet-induced photopolymerization. The 3D-FGHs' apparent Young's modulus ranges from 0.37 MPa (bulky hydrogel region) to 0.09 MPa (highest porosity region). A fish-shaped soft swimmer is fabricated to demonstrate the feasibility of the LFT technique to produce bioinspired robots. Mobility tests show a significant improvement in terms of swimming speed when the robot is provided with a graded body. The proposed manufacturing approach constitutes an enabling solution for the development of macroscopic functionally graded hydrogel-based structures usable in biomimetic underwater soft robotics applications.
Assuntos
Robótica , Animais , Biomimética/métodos , Hidrogéis/química , Porosidade , Robótica/métodos , NataçãoRESUMO
The interest for biodegradable electronic devices is rapidly increasing for application in the field of wearable electronics, precision agriculture, biomedicine, and environmental monitoring. Energy storage devices integrated on polymeric substrates are of particular interest to enable the large-scale on field use of complex devices. This work presents a novel class of eco-friendly supercapacitors based on biodegradable poly(3-hydroxybutyrrate) PHB, ionic liquids, and cluster-assembled gold electrodes. By electrochemical characterization, we demonstrate the possibility of tuning the supercapacitor energetic performance according to the type and amount of the ionic liquid employed. Our devices based on hydrophobic plastic materials are stable under cyclic operation and resistant to moisture exposure.
RESUMO
We report on the fabrication and electro-mechanical characterization of a nanocomposite system exhibiting anisotropic electrical response under the application of tactile compressive stresses (5 kPa) at low frequencies (0.1-1 Hz). The nanocomposite is based on a chemically cross-linked gel incorporating a highly conductive ionic liquid and surface functionalized barium titanate (BaTiO3) ferroelectric nanoparticles. The system was engineered to respond to mechanical stimulations by combining piezoionic and piezoelectric activity, generating electric charge due to a redistribution of the mobile ions across the polymer matrix and to the presence of the electrically polarized ceramic nanoparticles, respectively. The nanocomposite response was characterized in a quasi-static regime using a custom-designed apparatus. The results obtained showed that the combination of both piezo-effects led to output voltages up to 8 mV and anisotropy in the response. This allows to discriminate the sample orientation with respect to the load direction by monitoring the phase and amplitude modulation of the output signal. The integration of cluster-assembled gold electrodes produced by Supersonic Cluster Beam Deposition (SCBD) was also performed, enabling to enhance the charge transduction efficiency by a factor of 10, compared to the bare nanocomposite. This smart piezoionic/piezoelectric nanocomposite represents an interesting solution for the development of soft devices for discriminative touch sensing and objects localization in physically unstructured environments.