RESUMO
The push to advance efficient, renewable, and clean energy sources has brought with it an effort to generate materials that are capable of storing hydrogen. Metal-organic framework materials (MOFs) have been the focus of many such studies as they are categorized for their large internal surface areas. We have addressed one of the major shortcomings of MOFs (their processibility) by creating and 3D printing a composite of acrylonitrile butadiene styrene (ABS) and MOF-5, a prototypical MOF, which is often used to benchmark H2 uptake capacity of other MOFs. The ABS-MOF-5 composites can be printed at MOF-5 compositions of 10% and below. Other physical and mechanical properties of the polymer (glass transition temperature, stress and strain at the breaking point, and Young's modulus) either remain unchanged or show some degree of hardening due to the interaction between the polymer and the MOF. We do observe some MOF-5 degradation through the blending process, likely due to the ambient humidity through the purification and solvent casting steps. Even with this degradation, the MOF still retains some of its ability to uptake H2, seen in the ability of the composite to uptake more H2 than the pure polymer. The experiments and results described here represent a significant first step toward 3D printing MOF-5-based materials for H2 storage.
RESUMO
To expand the chemical capabilities of 3D printed structures generated from commercial thermoplastic printers, we have produced and printed polymer filaments that contain inorganic nanoparticles. TiO2 was dispersed into acrylonitrile butadiene styrene (ABS) and extruded into filaments with 1.75 mm diameters. We produced filaments with TiO2 compositions of 1%, 5%, and 10% (kg/kg) and printed structures using a commercial 3D printer. Our experiments suggest that ABS undergoes minor degradation in the presence of TiO2 during the different processing steps. The measured mechanical properties (strain and Young's modulus) for all of the composites are similar to those of structures printed from the pure polymer. TiO2 incorporation at 1% negatively affects the stress at breaking point and the flexural stress. Structures produced from the 5 and 10% nanocomposites display a higher breaking point stress than those printed from the pure polymer. TiO2 within the printed matrix was able to quench the intrinsic fluorescence of the polymer. TiO2 was also able to photocatalyze the degradation of a rhodamine 6G in solution. These experiments display chemical reactivity in nanocomposites that are printed using commercial 3D printers, and we expect that our methodology will help to inform others who seek to incorporate catalytic nanoparticles in 3D printed structures.
RESUMO
A technique was developed for preparing a novel material that consists of gold nanoparticles trapped within a fiber of unfolded proteins. These fibers are made in an aqueous solution that contains HAuCl4 and the protein, bovine serum albumin (BSA). By changing the ratio of gold to BSA in solution, two different types of outcomes are observed. At lower gold to BSA ratios (30-120), a purple solution results after heating the mixture at 80 °C for 4 h. At higher gold to BSA ratios (130-170), a clear solution containing purple fibers results after heating the mixture at 80 °C for 4 h. UV-Vis spectroscopy and light scattering techniques show growth in nanocolloid size as gold to BSA ratio rises above 100. Data indicate that, for the higher gold to BSA ratios, the gold is sequestered within the solid material. The material mass, visible by eye, appears to be an aggregation of smaller individual fibers. Scanning electron microscopy and transmission electron microscopy indicate that these fibers are primarily one-dimensional aggregates, which can display some branching, and can be as narrow as 400 nm in size. The likely mechanism for the synthesis of the novel material is discussed.
RESUMO
PURPOSE. Use of nomograms based on the "heparin correlation value" (HCV)-a value that corresponds to measured activated partial thromboplastin time (aPTT) and that removes the need to revise nomograms in response to a change in the aPTT reagent or coagulometer used-was evaluated as an alternative to traditional aPTT-based anticoagulation nomograms. SUMMARY. Data were collected on patients receiving heparin therapy for selected indications (thrombotic disorders, cardiac conditions, and acute coronary syndromes) during four-month periods before (n = 59) and after (n = 60) implementation of the HCV-based nomograms. The primary endpoints were the rate at which coagulation laboratory measurements were obtained at the appropriate time and the rate of appropriate dosage adjustment in response to reported laboratory values; secondary endpoints included the time to attainment of the first target anticoagulation value. After implementation of HCV-based nomograms, coagulation laboratory measurements were obtained at the appropriate time in (mean ± S.D.) 92.9% ± 12.8% of patients, compared with 80.1% ± 15.5% of patients who received aPTT-based monitoring (p < 0.0001). After implementation of HCV-based monitoring, the rate of correct heparin dosage adjustments was improved (mean ± S.D. 94.7% ± 7.8% versus 89.3% ± 14.0%, p = 0.01), and the time to attainment of the first target anticoagulation value was shorter (mean ± S.D. 16.4 ± 10.6 hours versus 21.5 ± 14.8 hours, p = 0.03). CONCLUSION. The HCV, which relates measured aPTT values to corresponding antifactor Xa concentrations, was substituted for aPTT in heparin nomograms and appeared to be a viable alternative to the aPTT.
Assuntos
Anticoagulantes/administração & dosagem , Heparina/administração & dosagem , Nomogramas , Tempo de Tromboplastina Parcial , Adulto , Idoso , Idoso de 80 Anos ou mais , Anticoagulantes/farmacologia , Coagulação Sanguínea/efeitos dos fármacos , Feminino , Heparina/farmacologia , Hospitais Universitários , Humanos , Masculino , Pessoa de Meia-Idade , North Carolina , Avaliação de Resultados em Cuidados de Saúde/métodosRESUMO
The adsorption and aggregation of ß-amyloid (1-16) fragment at the air-water interface was investigated by the combination of second harmonic generation (SHG) spectroscopy, Brewster angle microscopy (BAM), and molecular dynamics simulations (MD). The Gibbs free energy of surface adsorption was measured to be -10.3 kcal/mol for bulk pHs of 7.4 and 3, but no adsorption was observed for pH 10-11. The 1-16 fragment is believed not to be involved in fibril formation of the ß-amyloid protein, but it exhibits interesting behavior at the air-water interface, as manifested in two time scales for the observed SHG response. The shorter time scale (minutes) reflects the surface adsorption, and the longer time scale (hours) reflects rearrangement and aggregation of the peptide at the air-water interface. Both of these processes are also evidenced by BAM measurements. MD simulations confirm the pH dependence of surface behavior of the ß-amyloid, with largest surface affinity found at pH = 7. It also follows from the simulations that phenylalanine is the most surface exposed residue, followed by tyrosine and histidine in their neutral form.
Assuntos
Peptídeos beta-Amiloides/química , Simulação de Dinâmica Molecular , Fragmentos de Peptídeos/química , Água/química , Adsorção , Ar , Concentração de Íons de Hidrogênio , Análise Espectral , Propriedades de SuperfícieRESUMO
Specific, quantitative, and sensitive protein detection with minimal sample preparation is an enduring need in biology and medicine. Protein detection assays ideally provide quick, definitive measurements that use only small amounts of material. Fluorescence cross-correlation spectroscopy (FCCS) has been proposed and developed as a protein detection assay for several years. Here, we combine several recent advances in FCCS apparatus and analysis to demonstrate it as an important method for sensitive, quantitative, information-rich protein detection with low false positives. The addition of alternating laser excitation (ALEX) to FCCS along with a method to exclude signals from occasional aggregates leads to a very low rate of false positives, allowing the detection and quantification of the concentrations of a wide variety of proteins. We detect human chorionic gonadotropin (hCG) using an antibody-based sandwich assay and quantitatively compare our results with calculations based on binding equilibrium equations. Furthermore, using our aggregate exclusion method, we detect smaller oligomers of the prion protein PrP by excluding bright signals from large aggregates.
Assuntos
Proteínas/análise , Espectrometria de Fluorescência/métodos , Anticorpos/imunologia , Gonadotropina Coriônica/análise , Gonadotropina Coriônica/imunologia , Humanos , Imunoensaio , Lasers , Príons/análise , Príons/imunologia , Proteínas/imunologia , Coloração e RotulagemRESUMO
Fluorescence correlation spectroscopy (FCS) was used to investigate the hydrodynamic and photophysical properties of PR1 (phytofluor red 1), an intensely red fluorescent biliprotein variant of the truncated cyanobacterial phytochrome 1 (Cph1Delta, which consists of the N-terminal 514 amino acids). Single-molecule diffusion measurements showed that PR1 has excellent fluorescence properties at the single-molecule level, making it an interesting candidate for red fluorescent protein fusions. FCS measurements for probing dimer formation in solution over a range of protein concentrations were enabled by addition of Cph1Delta apoprotein (apoCph1Delta) to nanomolar solutions of PR1. FCS brightness analysis showed that heterodimerization of PR1 with apoCph1Delta altered the chemical environment of the PR1 chromophore to further enhance its fluorescence emission. Fluorescence correlation measurements also revealed interactions between apoCph1Delta and the red fluorescent dyes Cy5.18 and Atto 655 but not Alexa Fluor 660. The concentration dependence of protein:dye complex formation indicated that Atto 655 interacted with, or influenced the formation of, the apoCph1 dimer. These studies presage the utility of phytofluor tags for probing single-molecule dynamics in living cells in which the fluorescence signal can be controlled by the addition of various chromophores that have different structures and photophysical properties, thereby imparting different types of information, such as dimer formation or the presence of open binding faces on a protein.