RESUMO
PURPOSE: Extemporaneous compounding is an important part of pharmacy practice, and should be standardized and sophisticated to ensure the quality of the compounded preparations. Recently, we applied a planetary centrifugal mixer (PCM) to powder blending, which has attracted interest for its small scale and lack of contamination. In this study, we aimed to reveal the feasibility of dry powder coating through ordered mixing of fine particles using PCM. METHODS: Cohesive lactose powders (Pharmatose450M) were dry coated with magnesium stearate (MgSt) using from 0.1 to 5%(w/w) content. The operational variables tested were operation time (1-30 min), operation speed (400-1000 rpm), vessel size (24-100 mL), and charging rate in the vessel (20-40%). The processed powders were evaluated for their surface morphology, flowability, and wettability. Furthermore, fine ibuprofen particles were coated with various lubricants, and then the dissolution profiles were examined. The crystallinity of ibuprofen was assessed using FT-IR and PXRD. RESULTS: Lactose powders were successfully coated with MgSt using PCM. When the level of MgSt was over 1%, the surface of the lactose powders was thoroughly covered. Angles of repose were 51° and 41° for unprocessed and processed powders with 1% MgSt, respectively. The contact angle of the water drop on the 1% MgSt sample leached to be 132°, changing to a hydrophobic surface. Investigations under various operational conditions revealed that higher improvement was observed upon higher speed and longer time, and a smaller charging rate in the vessel. Vessel size had no impact. Moreover, improved dissolution of ibuprofen coated with both hydrophilic and hydrophobic lubricants was observed owing to good dispersing behavior. Besides, no alteration of crystallinity was detected. CONCLUSIONS: PCM is an effective tool for dry powder coating with low impact stress. The presented method will contribute a great deal to making crushed tablets a functional powder.
Assuntos
Química Farmacêutica/métodos , Pós/síntese química , Excipientes/síntese química , Lactose/síntese química , Tamanho da Partícula , Ácidos Esteáricos/síntese química , Propriedades de Superfície , Difração de Raios XRESUMO
In the dispensing process, powdered medicines are often blended with diluents or different kinds of powder. With blending, the mass percent of the medicine in the mixture is unknown until the active pharmaceutical ingredient is determined with techniques such as spectroscopy and chromatography. However, pharmacists need to confirm the exact blending ratio of the dispensing mixture in pharmacies. We aimed to develop a precise and concise method to measure the mass percent of powdered medicine mixtures without an expensive analytical apparatus. Digital photographs of three kinds of mixture of lactose powder, as diluents, with Adona®, Anginal®, or Asverin® powder were taken with a microscope at a 30× magnification. Thereafter, the mass percent was calculated from digital images of the mixture using calibrated color information in the YCbCr color space. A linear regression, between the mass percent and color difference signal, Cb, value was obtained from 10 to 90% of the medicines (r(2)=0.9806-9993) in all systems. The intra-day accuracy and precision were 0.67-12% (relative error) and <5% (relative standard deviation), respectively. Moreover, the mass percent measured using image analysis was consistent with the concentration of the active pharmaceutical ingredient determined spectrophotometrically. This effective image analysis method enables pharmacists to nondestructively ensure the exact mass percent of the medicine in the dispensing mixture in pharmacies.
Assuntos
Processamento de Imagem Assistida por Computador/métodos , Pós/química , Tecnologia Farmacêutica/métodos , Calibragem , Espectrofotometria UltravioletaRESUMO
We introduced the application of a planetary centrifugal mixer to dispensing powdered medicines to prevent from individual variation in the skills of pharmacists with a manual blending. The blending performance of the mixer was explored in terms of four operational variables, namely, operation speed (400-1000 rpm), operation time (10-60 s), charging rate in vessel (20-50%), and size of vessel (35, 58, 125, 550 mL), using colored lactose and crystalline lactose as the principle model medicine and diluent, respectively. The blending degree was assessed by image analysis, so the extent of uniformity was expressed as the relative standard deviation of the color difference signal Cb value of YCrCb color space. Application of the mixer to blending three commercial medicines with diluents was carried out. Sufficient blending was achieved at 10 s using a 20% charging rate and 35 mL vessel irrespective of operation speed. As the charging rate was increased, a higher operation speed was needed to obtain uniform blending. A larger sized vessel also required a higher operation speed. Uniform blending was achieved in all of the mixtures of colored lactose and crystalline lactose at the weight ratio of 1 : 9-9 : 1. In the application studies using Adona®, Anginal® and Neophylline® powder, the blending performance of the mixer was equivalent to that of the manual blending method, showing relative standard deviations of 2.2-3.3% and 1.8-3.8%, respectively. These results revealed that the planetary centrifugal mixer was suitable for blending powdered medicine.