Superimposition of sequential scans to measure erosion on unpolished and curved human enamel.

OBJECTIVES: To determine if superimposition of sequential scans can discriminate between different fluorides at step heights less than 5 µm on natural human enamel surfaces. MATERIALS AND METHODS: Natural, unpolished, human enamel specimens (n = 60) were randomly assigned to one of three pre-treatment toothpaste slurries with a calcium silicate/fluoride, fluoride-only and a control. Baseline and post treatment scans, from a non-contacting profilometer with a 0.01 µm z-axis and <1 µm lateral scanning resolution were imported into superimposition software to define change in mean 3D step height and surface roughness following erosion in 0.3% citric acid for 15 min. Statistical analysis conducted with two-way repeated measures ANOVA and post-hoc Tukey's multiple comparisons. RESULTS: Confidence and resolution of superimposition and subtraction of repeated profiles from unpolished enamel revealed accuracy within 1-2 µm. The technique was able to discriminate between the fluorides demonstrating statistical differences in mean (SD) 3D step height (µm) of 1.96 (0.40) and 2.75 (0.49) (p = 0.0024). There was a statistically significant increase in surface roughness for all groups after 15 min erosion compared to baseline. But no statistically significant difference between the interventions after 15 min erosion but there was compared to no fluoride (p = 0.006). CONCLUSION: Superimposition and subtraction of profiles could discriminate between fluoride interventions, which showed statistical differences in enamel loss differences less than 3 µm. CLINICAL SIGNIFICANCE: This erosion model and data analysis workflow was able to distinguish differences between scans of 3 µm on unpolished enamel following the interaction with fluoride.

In vitro evaluation of the early erosive lesion in polished and natural human enamel.

OBJECTIVE: This study evaluated the capability of profilometry, microhardness, Optical Coherence Tomography (OCT) and Tandem Scanning Confocal Microscopy (TSM) in characterising the early erosive lesion in polished and natural human enamel in vitro. METHODS: Polished (n=60) and natural (n=60) human enamel surfaces, were immersed and agitated in 0.3% citric acid erosion at 0s, 10s, 30s, 60s, 120s, and 300s (n=10). Changes in the surface were measured with 3D-step height change (µm), surface roughness (µm), surface microhardness (KHN), and images were assessed qualitatively with OCT and TSM. RESULTS: Mean (SD) 3D-step height change (µm) was measurable for polished enamel at: 60s (0.24±0.1), 120s (1.16±0.71), 300s (2.01±0.47; p<0.05); a step height change was not detectable on acid challenged natural enamel surfaces. Mean (SD) surface roughness (µm) of polished enamel was detected at 10s (0.270±0.013; p<0.05) and all erosion periods; and in natural enamel detected after 120s (0.830±0.125) and 300s (0.800±0.140; p<0.005). Polished enamel Mean (SD) microhardness (KHN) statistically significantly decreased at all time points (p<0.001); this was unmeasurable for natural enamel. Qualitative image analysis of both surface types indicated erosive change at the surface level, with progression after increasing erosion time. SIGNIFICANCE: The early erosive lesion in polished enamel could be characterised quantitatively surface roughness and microhardness and qualitatively using OCT and TSM; whilst in natural enamel only surface roughness could be utilised. Further investigation of early erosion in natural enamel is required to develop new more clinically relevant models.

Randomised Controlled Clinical Trial Investigating The Impact of Implementation Planning on Behaviour Related to The Diet.

There is a perceived gap between dietary advice given by health practitioners and adherence to the advice by patients. We investigated whether a behaviour change technique (implementation-planning) was more effective than standard-of-care diet advice at reducing dietary acid intake using quantitative erosive tooth wear progression as an objective clinical outcome. This study was a randomised controlled, double-blind, single-centre clinical trial in the UK. Participants (n = 60) with high dietary acid intake (≥2 daily), were recruited and randomly assigned (1:1) to receive either implementation-planning or standard-of-care diet advice in a single clinical session. Questionnaires and impressions were taken at baseline and 6 months later. Dental casts were scanned using laser profilometry and superimposed using surface-matching software. Data were analysed per protocol and intention-to-treat using independent t-tests and Mann-Whitney tests. The intervention group reduced their dietary acid intake between meals to 1 intake per day compared to 2 intakes per day for the controls and demonstrated reduced dental hard tissue volume loss (-0.00 mm3 (SD = 0.01)) compared to controls (-0.07 mm3 (SD 0.17)), p = 0.049. This paper supports the use of implementation planning in clinical practice and presents a non-invasive method of intervention assessment in behaviour change. Larger trials are needed to confirm the generalisability of results.

Medical conditions and erosive tooth wear.

There are many reasons why it is vital that dental professionals identify signs and symptoms that suggest that an individual's erosive tooth wear (ETW) may be linked to a broader medical problem than just poor diet. Primarily, spotting an underlying medical cause for ETW increases the likelihood that further deterioration in the individual's oral health will be prevented. However, perhaps more importantly, many of the medical conditions which are commonly related to ETW can have serious and even possibly fatal consequences if left untreated or not diagnosed. This paper reviews the nature of the most common and serious medical conditions related to ETW, such as gastro-oesophageal reflux disease (GORD), laryngo-pharyngeal reflux (LPR) and eating disorders. This article also covers the role of the dental team in the diagnoses, prevention and management of these conditions.

First Cultivation of Health-Associated Tannerella sp. HOT-286 (BU063).

Despite significant advances in recent years in culture-independent molecular microbiology methods, the detailed study of individual bacterial species still relies on having pure cultures in the laboratory. Yet, more than a third of the approximately 700 bacterial taxa found in the human oral cavity are as yet uncultivated in vitro. One such taxon, Tannerella sp. HOT-286 (phylotype BU063), is the focus of much interest since it is associated with periodontal health, while Tannerella forsythia, its closest phylogenetic neighbor, is strongly associated with periodontal disease. HOT-286, however, has remained uncultivated despite the efforts of several research groups, spanning over a decade. The aim of this study was to cultivate Tannerella sp. HOT-286. A heavily diluted sample of subgingival plaque was inoculated onto culture plates supplemented with siderophores (pyoverdines-Fe complex or desferricoprogen) or a neat plaque suspension. After 8 d of anaerobic incubation, microcolonies and colonies showing satellitism were passaged onto fresh culture plates cross-streaked with potential helper strains or onto cellulose-acetate membranes placed over lawn cultures of helper strains. Subcultured colonies were identified by 16S rRNA gene sequencing, and purity was confirmed by sequencing 20 clones per library prepared from a single colony. Three colonies of interest (derived from pyoverdines- and plaque-supplemented plates) were identified as Tannerella sp. HOT-286. The isolates were found to be incapable of independent growth, requiring helpers such as Propionibacterium acnes and Prevotella intermedia for stimulation, with best growth on membranes over "helper" lawns. A representative isolate was subjected to phenotypic characterization and found to produce a range of glycosidic and proteolytic enzymes. Further comparison of this novel "periodontal health-associated" taxon with T. forsythia will be valuable in investigating virulence factors of the latter and possible health benefits of the former.

Efficacy of sodium and stannous fluoride mouthrinses when used before single and multiple erosive challenges.

BACKGROUND: Application of fluoride mouthrinse before an acidic challenge may decrease enamel erosion. This paper compares the efficacy of stannous (SnF2 ) and sodium (NaF) fluoride when facing single and multiple erosive cycles in vitro. METHODS: Human enamel samples (N = 60) were randomly assigned to groups testing SnF2 and NaF mouthrinses (225 p.p.m.) and a water control. Samples were allocated into subgroups testing one or five erosive cycles. Samples were immersed in test solution for 1 min prior to citric acid immersion (0.3%, pH 3.2, 10 min), and the cycle repeated either one or five times. Analysis was done using profilometry and microhardness change. RESULTS: After one cycle, SnF2 resulted in least step height followed by NaF and water (1.3 µm (0.63), 2.3 µm (0.39), 4.3 µm (0.41) respectively; P < 0.0001). After five cycles SnF2 continued to reduce step height but pre-application of NaF was no different to water (4.6 µm (0.7), 10.5 µm (1.1) and 11.1 µm (0.38) respectively; P < 0.0001). There were no statistical differences in microhardness change between fluorides. After one erosive cycle, fluoride application resulted in statistically softer enamel compared with water. CONCLUSIONS: Both SnF2 and NaF reduced erosion after one cycle. After five cycles, SnF2 continued to offer protection whereas NaF was statistically comparable with water. Softening of enamel may not imply less erosion has occurred.

Confocal laser scanning microscopy and area-scale analysis used to quantify enamel surface textural changes from citric acid demineralization and salivary remineralization in vitro.

OBJECTIVES: This paper investigates the application of confocal laser scanning microscopy to determine the effect of acid-mediated erosive enamel wear on the micro-texture of polished human enamel in vitro. METHODS: Twenty polished enamel samples were prepared and subjected to a citric acid erosion and pooled human saliva remineralization model. Enamel surface microhardness was measured using a Knoop hardness tester, which confirmed that an early enamel erosion lesion was formed which was then subsequently completely remineralized. A confocal laser scanning microscope was used to capture high-resolution images of the enamel surfaces undergoing demineralization and remineralization. Area-scale analysis was used to identify the optimal feature size following which the surface texture was determined using the 3D (areal) texture parameter Sa. RESULTS: The Sa successfully characterized the enamel erosion and remineralization for the polished enamel samples (P<0.001). SIGNIFICANCE: Areal surface texture characterization of the surface events occurring during enamel demineralization and remineralization requires optical imaging instrumentation with lateral resolution <2.5 µm, applied in combination with appropriate filtering in order to remove unwanted waviness and roughness. These techniques will facilitate the development of novel methods for measuring early enamel erosion lesions in natural enamel surfaces in vivo.

The influence of varnish and high fluoride on erosion and abrasion in a laboratory investigation.

BACKGROUND: The aim of this study was to investigate the potential of concentrated fluoride varnishes to reduce enamel loss from repeated cycles of citric acid erosion and toothbrush abrasion in vitro. METHODS: Polished human enamel samples were exposed to fluoride varnishes: Bifluorid10® (NaF&CaF2- 45,200 ppmF), Duraphat® (NaF 22,600 ppmF), Fluor-Protector® (difluorsilane 1000 ppmF) and a control coating of copal ether varnish (0 ppmF) group and a deionized water group. For each group of 16 samples, nine cycles of erosion and nine cycles of erosion-abrasion [1 cycle=erosion (0.3% citric acid, pH 3.2, 5 min)+artificial saliva (1 h, pH 7.0)+abrasion (120 linear strokes in artificial saliva from Oral B medium soft brushes 300 g loading]. The change in the enamel surface was evaluated using optical profilometry. RESULTS: Duraphat® and Bifluorid10® applications had a median (IQR) step height of 4.21 um (1.59) and 5.01 um (1.02). This was statistically significantly less than Fluor-Protector® 6.83 um (1.25), copal ether 7.22 um (1.97) and water 7.39 um (1.96) (p<0.001). For erosion-abrasion, both Duraphat® and Bifluorid® had statistically lower step heights than the other products (p<0.01). CONCLUSIONS: The action of fluoride in a range of single-application topical varnishes was effective in reducing enamel wear from erosion and erosion-abrasion in this laboratory study.

Consensus statement: Oral health and elite sport performance.

While the research base is limited, studies have consistently reported poor oral health in elite athletes since the first report from the 1968 Olympic Games. The finding is consistent both across selected samples attending dental clinics at major competitions and more representative sampling of teams and has led to calls from the International Olympic Committee for more accurate data on oral health. Poor oral health is an important issue directly as it can cause pain, negative effects on appearance and psychosocial effects on confidence and quality of life and may have long-term consequences for treatment burden. Self-reported evidence also suggests an impact on training and performance of athletes. There are many potential challenges to the oral health of athletes including nutritional, oral dehydration, exercise-induced immune suppression, lack of awareness, negative health behaviours and lack of prioritisation. However, in theory, oral diseases are preventable by simple interventions with good evidence of efficacy. The consensus statement aims to raise awareness of the issues of oral health in elite sport and recommends strategies for prevention and health promotion in addition to future research strategies.

Composition of enamel pellicle from dental erosion patients.

Oral health is dependent upon a thin mobile film of saliva on soft and hard tissues. Salivary proteins adhere to teeth to form the acquired enamel pellicle which is believed to protect teeth from acid erosion. This study investigated whether patients suffering diet-induced dental erosion had altered enamel pellicles. Thirty patients suffering erosion were compared to healthy age-matched controls. Subjects wore a maxillary splint holding hydroxyapatite and human enamel blocks for 1 h. The acquired enamel pellicle was removed from the blocks and compared to the natural incisor pellicle. Basic Erosive Wear Examination scores confirmed that dental erosion was present in erosion patients and absent from healthy age-matched controls. Erosion patients had half the amount of proteins (BCA assay) within the acquired pellicle forming on splint blocks compared to normal controls (p < 0.05). In particular, statherin, a calcium-binding protein, was 35% less abundant (p < 0.05). Calcium concentration within the acquired pellicle was also reduced by 50% in erosion patients (p < 0.001). In contrast, the natural pellicle on the incisor had similar amounts of total protein in erosion patients and healthy controls. In summary, the formation of new acquired pellicles on surfaces was reduced in erosion patients, which may explain their greater susceptibility to acid erosion of teeth.

Validation of the Basic Erosive Wear Examination.

The Basic Erosive Wear Examination (BEWE) is a practical index for screening tooth wear, using a 4-point ordinal scale (0-3). The highest score is recorded in each sextant and a total score (or BEWE sextant cumulative) is calculated per subject. This study aims to investigate if the BEWE sextant cumulative score compares to one comprising a percentage score from all tooth surfaces and as a highest BEWE per subject. The aim is to assess the validity of this score. A total of 350 subjects were recruited from hospital and general practice in south-east England. Buccal, occlusal and lingual/palatal BEWE scores were collected and percentages calculated based on scores 1, 1 and above, 2 and above and 3. BEWE sextant cumulative scores and highest BEWE scores were also recorded per subject. Spearman's correlation coefficients (p values) assessed the relationship between BEWE sextant cumulative scores, BEWE percentages and BEWE highest score per subject. The BEWE sextant cumulative score correlates significantly to a BEWE score taken as a percentage score from all tooth surfaces (Spearman's r > 0.5, p < 0.001) and especially to BEWE surface scores of 1 and above and 2 and above (r > 0.8, p < 0.001) and as a highest surface score per subject (r > 0.8, p < 0.001). BEWE sextant score provides a representation of tooth wear on all tooth surfaces. This study validates a tooth wear index, which provides clinicians with risk indicators of a patient's level of tooth wear and may help to guide clinical management.

Comparison of the possible protective effect of the salivary pellicle of individuals with and without erosion.

The acquired pellicle adheres to tooth surfaces and has been suggested to provide differing degrees of protection against acidic erosion. This study investigated whether pellicle formed on enamel blocks in patients suffering dietary dental erosion modified the effect of an in vitro simulated dietary challenge, in comparison with pellicle formed on enamel blocks in healthy subjects and to no-pellicle enamel samples. Sixty subjects recruited from dental erosion clinics were compared to healthy age-matched controls. Subjects wore a custom-made maxillary splint holding human enamel blocks for 1 h during which the acquired enamel pellicle was formed. Enamel blocks were removed from the splints and a simulated dietary erosive challenge of 10 min was performed. In addition the challenge was performed on 30 enamel samples without pellicle. Profilometry showed no statistical difference between samples from the erosion subjects with a mean step height of 1.74 µm (SD 0.88) and median roughness (Sa) of 0.39 µm (interquartile range, IQR 0.3-0.56) and the controls with 1.34 µm (SD 0.66) and 0.33 µm (IQR 0.27-0.38), respectively. The control samples without pellicle had Sa of 0.44 µm (IQR 0.36-0.69) and these differences were statistically significant compared to those from the healthy subjects (p = 0.002). Mean (SD) microhardness reduction with a 100-gram load for the erosion group was 113.5 (10) KHN, for healthy subjects was 93 (15.4) KHN and for the enamel samples without pellicle 139.6 (21.8) KHN and all groups were statistically different. The microhardness and roughness data suggested the pellicle influenced erosion under these study conditions.

A novel method to quantify dentine tubule occlusion applied to in situ model samples.

OBJECTIVES: To develop an innovative computerised routine, in conjunction with a minimally destructive imaging technique, to quantify dentine tubule occlusion. METHODS: Polished human dentine samples (n = 480) were brushed during a 4-day in situ study with two occlusion-based dentifrices, a sodium fluoride control dentifrice (1,450 ppm) or water. Samples were imaged with tandem scanning microscopy (TSM) and conventional scanning electron microscopy (SEM). The level of dentine patency was then assessed using a visual ordinal scale ('standard') or quantitatively using a specially designed computational routine. RESULTS: The occlusion-based dentifrice resulted in significantly less patent dentine than controls for the 'standard' (p = 0.01) assessment, but not for computer analyses (p = 0.10). The correlation of the number of individual patent tubules counted visually and by the computational routine in calibrations and in the in situ study was ≥ 0.8. CONCLUSIONS: This study identified a new computer-based routine, capable of objectively quantifying the patency of dentine imaged by SEM and TSM.

A qualitative and quantitative investigation into the effect of fluoride formulations on enamel erosion and erosion-abrasion in vitro.

OBJECTIVES: To investigate the effect of a single application of highly concentrated SnF(2) and NaF solutions and a NaF/CaF(2) varnish on human enamel subjected to hydrochloric acid erosion and tooth brush abrasion. METHODS: Forty enamel samples were prepared from human third molars and NaF (9500ppm, pH 8.0), SnF(2) (9500ppm, pH 2.6) solutions; Bifluorid10(®) varnish (42,500ppm, NaF 5%, CaF(2) 5%) and deionized water (control) was applied to the enamel. Following this three, six and nine cycles of erosion [1 cycle=erosion (0.01M HCl, pH 2.2, 2min)+artificial saliva (1h, pH 7.0)] and erosion-abrasion [1 cycle=erosion (0.01M HCl, pH 2.2, 2min)+artificial saliva (1h, pH 7.0)+abrasion (120 linear strokes in artificial saliva from Tepe medium soft brushes 200g loading)] were carried out. The fluoride treated enamel was analysed using Knoop microhardness, scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS). RESULTS: For erosion alone, there was significantly less microhardness reduction in the Bifluorid10(®) group after three and six cycles of erosion (P<0.05), however no other groups showed statistically different hardness (P>0.05). The EDS analysis showed that only the Bifluorid10(®) group had any detectable fluorine following erosion and erosion-abrasion (0.1wt.% and 0.2wt.% fluorine respectively). The surface fluorine was found to have been removed after erosion and erosion-abrasion for all other surface treatments. Although precipitates were observed after application of the surface treatments, following erosion-abrasion, no visible surface effects from any fluoride preparation remained. CONCLUSIONS: Enamel surface precipitates from application NaF, SnF(2) solutions appear to not be able to provide protection against gastric erosion and tooth brush abrasion. The NaF/CaF(2) varnish provided limited protection against erosion but the role for such varnishes in gastric erosion and tooth brush abrasion remains uncertain.

Gastro-oesophageal reflux disease symptoms and tooth wear in patients with Sjögren's syndrome.

The aim of this study was to assess the prevalence of gastro-oesophageal reflux disease (GORD) symptoms and tooth wear in patients with Sjögren's syndrome (SS) compared with matched controls. GORD symptoms were assessed for 33 SS patients and 20 age- and sex-matched controls. Tooth wear was assessed in all patients and controls. The results were further analysed in two subgroups of SS patients and controls with and without GORD symptoms (SS patients without GORD symptoms: n = 11, controls without GORD symptoms: n = 18). A higher proportion of SS patients reported suffering from heartburn and regurgitation than controls (p < 0.001 and p = 0.02, respectively). SS patients without GORD symptoms had a statistically significantly higher percentage of surfaces with tooth wear affecting dentine than controls (p < 0.001).

An experiment on the attrition of acid demineralized dentine in vitro.

BACKGROUND: A laboratory investigation was designed to test the hypothesis that acids increase the rate of wear caused by attrition on dentine. METHODS: Dentine sections from 10 teeth were polished, cleaned in an ultrasonic bath and divided into 8 equally sized areas. The occlusal tip of a tooth, placed vertically in a wear machine and loaded at 150 N, was moved against each dentine section for 5000 return strokes with artificial saliva acting as a lubricant. Each dentine section was divided into 8 sections and half randomly immersed in a 1% citric acid solution (pH 2.3) for 20 minutes. The wear regime produced 8 wear scars in total per dentine sample. The volume of each wear scar was measured using a contacting digitizing profilometer. RESULTS: A total of 80 wear scars were produced with 40 treated with acid and 40 acting as controls. The mean for wear volume of the dentine scars with acid was 4.84 µm(3) (1.38) and for the non-acid surface 2.95 µm(3) (0.86). This difference was statistically significant (p < 0.05). CONCLUSIONS: These results support the hypothesis that acids increase the rate of wear caused by attrition on dentine.

Trial of protective effect of fissure sealants, in vivo, on the palatal surfaces of anterior teeth, in patients suffering from erosion.

OBJECTIVES: Previous work has shown protection to eroded teeth offered by a resin-based adhesive lasted up to three months. The hypothesis investigated in this study was whether application of a fissure sealant would offer longer protection. METHODS: Seventeen adult patients with palatal tooth wear were recruited and written consent obtained. Metal discs were cemented on the palatal surfaces of all upper anterior teeth following previously published techniques. Alternate teeth within each subject were randomly chosen and coated with a clear fissure sealant using previously published methods. The uncoated teeth were used as controls. Accurate impressions were taken in custom made trays and repeated at 3, 6, 9, 12 and 20 months and scanned using a non-contacting laser profilometer. RESULTS: The mean (standard deviation) thickness of the fissure sealant was 290 µm (500) at the start and after 3 months a mean thickness of 120 µm (260) remained. At this point the control surfaces showed a mean 70 µm (113) of tooth wear. At 6 and 9 months the mean wear for control teeth was higher at 120 µm (114) and 110 µm (114) than sealed teeth at 50 µm (260) and 60 µm (440), respectively. A comparison of paired sites within subjects at their final visit indicated a statistically significant difference in wear between the sealed and control teeth (p=0.016). CONCLUSIONS: The use of fissure sealant to protect palatal dentine surfaces may have a role in prevention of tooth wear for up to a period of nine months.

The effect of increasing sodium fluoride concentrations on erosion and attrition of enamel and dentine in vitro.

OBJECTIVES: To investigate the effect of an aqueous sodium fluoride solution of increasing concentration on erosion and attrition of enamel and dentine in vitro. METHODS: Enamel and dentine sections from caries-free human third molars were polished flat and taped (exposing a 3 mm x 3 mm area) before being randomly allocated to 1 of 5 groups per substrate (n=10/gp): G1 (distilled water control); G2 (225 ppm NaF); G3 (1450 ppm NaF); G4 (5000 ppm NaF); G5 (19,000 ppm NaF). All specimens were subjected to 5, 10 and 15 cycles of experimental wear [1 cycle=artificial saliva (2h, pH 7.0)+erosion (0.3% citric acid, pH 3.2, 5 min)+fluoride/control (5 min)+attrition (60 linear strokes in artificial saliva from enamel antagonists loaded to 300 g)]. Following tape removal, step height (SH) in mum was measured using optical profilometry. RESULTS: When the number of cycles increased the amount of tooth surface loss increased significantly in enamel and dentine after attrition and erosion and for dentine after attrition. Attrition and erosion resulted in greater surface loss than attrition alone after 15 cycles of experimental wear of enamel. 5000 ppm and 19,000 ppm sodium fluoride solutions had a protective effect on erosive and attritional enamel tooth wear in vitro, however no other groups showed significant differences. CONCLUSIONS: The more intensive the fluoride regime the more protection was afforded to enamel from attrition and erosion. However, in this study no such protective effect was demonstrated for dentine.

An audit of prosthodontics undertaken in general dental practice in the South East of England.

AIMS: Before embarking upon changes to teaching in prosthodontics it is important to identify what techniques are being used in general practice. The aim of this study was to assess the current range and quantity of fixed and removable prosthodontics reported in general dental practice in the South East of England. METHOD: Structured questionnaires were sent to 191 randomly selected dentists from the GDC list in the South East of England, with 71% of the dentists completing the questionnaire. The questionnaire included demographic data, NHS/private and the range and quantity of fixed and removable prosthodontics. RESULTS: The reported number of removable prostheses undertaken was low; most metal dentures were made in private specialist practices, whereas most acrylic partial and complete dentures were made in NHS general practices. The number of bridges, in particular minimal preparation bridges, was low as opposed to the number of crowns, which was high in all types of practices. Implants were provided mainly by the specialists. CONCLUSIONS: Dentists reported prescribing low numbers of removable and fixed prostheses with the exception of crowns. Metal dentures and implants were mainly provided by specialists. The implications of this study emphasise the importance in teaching crowns to undergraduates.

The association of acidic reflux above the upper oesophageal sphincter with palatal tooth wear.

This case-controlled clinical study, conducted at a secondary care unit, compared pH measurement at 2 cm above the upper oesophageal sphincter (UOS) in 31 patients complaining of extra-oesophageal symptoms of reflux to 7 control subjects. Twenty-four-hour ambulatory pH measurements were recorded and analysed at 5 cm above the lower oesophageal sphincter (LOS) and 2 cm above the UOS. In reflux patients the proportion of supine time when pH at 5 cm above the LOS was <4 was significantly greater than in controls. The proportion of time when pH at 2 cm above the UOS was <5.5 was also significantly greater in patients than in controls. Palatal tooth wear observed in the patient group correlated with acid reflux at night. In this group of patients presenting with symptoms of reflux, gastric acid passed through the upper oesophageal sphincter and increased the potential for erosion.