RESUMO
We report the experimental demonstration of efficient second-harmonic generation by splicing optically poled fiber segments. A device made from five segments each 20 cm-long exhibits, at a fundamental average power of 4.2 mW, a maximum increase of 5.5 in the conversion efficiency with respect to a single 20 cm poled fiber, corresponding to a conversion efficiency of 5.4%. For any considered fundamental power, the conversion efficiency at the output of a five-segment device is larger than the efficiency of a single poled fiber having the same length.
RESUMO
Integrated nonlinear metasurfaces leading to high-efficiency optical second harmonic generation (SHG) are highly desirable for optical sensing, imaging, and quantum photonic systems. Compared to traditional metal-only metasurfaces, their hybrid counterparts, where a noncentrosymmetric nonlinear photonic material is incorporated in the near-field of a metasurface, can significantly boost SHG efficiency. However, it is difficult to integrate such devices on-chip due to material incompatibilities, thickness scaling challenges, and the narrow band gaps of nonlinear optical materials. Here, we demonstrate significantly enhanced SHG in on-chip integrated metasurfaces by using nanometer thin films of ferroelectric Y:HfO2. This material has the merit of CMOS compatibility, ultraviolet transparency up to 250 nm, and significant scalability down to sub-10 nm when deposited on silicon. We observe a 20-fold magnitude enhancement of the SHG intensity from the hybrid metasurface compared to a bare ferroelectric HfO2 thin film. Moreover, a 3-fold SHG enhancement is observed from the hybrid metasurface compared to a control structure using nonferroelectric HfO2, demonstrating a major contribution to the SHG signal from ferroelectric Y:HfO2. The effective second-order nonlinear optical coefficient χ(2) of Y:HfO2 is determined to be 6.0 ± 0.5 pm/V, which is comparable to other complex nonlinear photonic oxide materials. Our work provides a general pathway to build an efficient on-chip nanophotonic nonlinear light source for SHG using ferroelectric HfO2 thin films.
RESUMO
We experimentally study polarization dynamics of Kerr beam self-cleaning in a graded-index multimode optical fiber. We show that spatial beam cleaning is accompanied by nonlinear polarization rotation and a significant increase of the degree of linear polarization.
RESUMO
Nonlinear interactions are commonly used to access to wavelengths not covered by standard laser systems. In particular, optical parametric amplification (OPA) is a powerful technique to produce broadly tunable light. However, common implementations of OPA suffer from a well-known trade-off, either achieving high efficiency for narrow spectra or inefficient conversion over a broad bandwidth. This shortcoming can be addressed using adiabatic processes. Here, we demonstrate a novel technique towards this direction, based on a temperature-controlled phase mismatch between the interacting waves. Using this approach, we demonstrate, by tailoring the temperature profile, an increase in conversion efficiency by 21%, reaching a maximum of 57%, while simultaneously expanding the bandwidth to over 300 nm. Our technique can readily enhance the performances of current OPA systems.
RESUMO
We numerically study the mechanisms of frequency comb generation in the mid-infrared spectral region from cw-pumped silicon microring resonators. Coherent soliton comb generation may be obtained even for a pump with zero linear cavity detuning, through suitable control of the effective lifetime of free carriers from multiphoton absorption, which introduces a nonlinear cavity detuning via free-carrier dispersion. Conditions for optimal octave spanning Raman comb generation are also described.
RESUMO
We demonstrate an ultracompact optical filter based on two coupled high-index contrast GaAs photonic crystal (PhC) membranes. The PhC membranes consist of a square lattice of air holes and behave as a Fabry-Perot cavity whose reflectivity and transmissivity depend on the air gap between the two membranes. The normal-incidence reflectance measurements and the numerical simulation of reflection spectra show a high sensitivity to the geometrical parameters, such as the distance between the slabs, whose control would make the device suitable for a new class of tunable optical filters.
Assuntos
Arsenicais/química , Gálio/química , Óptica e Fotônica , Simulação por Computador , Desenho de Equipamento/instrumentação , Teste de Materiais , Membranas Artificiais , Microscopia Eletrônica de Varredura/métodos , Modelos Teóricos , Dispositivos Ópticos , Fótons , Reprodutibilidade dos TestesRESUMO
We describe the application of full-wave and semi-analytical numerical tools for the modeling of optical wire antennas, with the aim of providing novel guidelines for analysis and design. The concept of antenna impedance at optical frequencies is reviewed by means of finite-element simulations, whereas a surface-impedance integral equation is derived in order to perform an accurate and efficient calculation of the current distribution, and thereby to determine the equivalent-circuit parameters. These are introduced into simple circuits models, directly borrowed from radio frequency, which are applied in order to model the phenomena of enhanced field confinement at the feed gap and light scattering by optical antennas illuminated by plane waves.
RESUMO
We report a systematic analysis of anomalous refractive effects at interfaces between two photonic crystal waveguide arrays. Discrete negative refraction can be easily predicted from the sign of the coupling coefficient between adjacent waveguides, regardless of handedness of propagation.
RESUMO
We report the first observation of enhanced third-order nonlinear effects in AlGaAs nanowires. AlGaAs nanowaveguides with widths varying from 100 to 600nm were fabricated and characterized. Nonlinear phase shifts of approximately pi were experimentally observed at 1.55mum with peak powers of 30-40W in 600mum long, 550nm wide guides.
RESUMO
Light propagation in uniform arrays of photonic crystal waveguides is studied. We demonstrate that, in stark contrast to the case of conventional waveguide arrays, diffraction can be tailored both in magnitude and sign by varying only the spacing between adjacent waveguides. Diffraction management in ultracompact arrays of straight photonic crystal waveguides is demonstrated by solving Maxwell's equations through the time-domain finite-element method.