Influence of Sexcel™ (gender ablation technology) gender-ablated semen in fixed-time artificial insemination of beef cows and heifers.

Previous research has indicated that gender-sorted semen has decreased conception rates compared to conventional semen. A new method to skew the gender ratio of semen has been developed that does not use traditional sorting technology. Thus, the objective of this study was to evaluate the use of gender-ablated semen in a fixed-time AI protocol. Beef heifers and cows (n = 878) from six herds were synchronized with the 7-d CO-Synch plus CIDR protocol, and artificially inseminated (AI) after CIDR removal (cows 60-66 h; heifers 52-56 h). Estrus detection aids were applied at CIDR removal and estrus activity was determined at time of AI. Animals remained separated from bulls for at least 10 d after AI. Pregnancy success and fetal age were determined between d 28 and 70 after AI. Semen from five sires was utilized in this study, with two sires used in each herd. Sire 1 was used in all herds and the use of the second sire varied by herd (both conventional and gender-ablated semen from each sire was used in each herd). Data were analyzed using the GLIMMIX procedure in SAS and included the influence of semen type, estrus expression, semen type by estrus expression, dam age, and sire in the model. Herd was included as a random variable. Overall, conventional semen had greater conception rates compared to gender-ablated semen (P < 0.01; 67% vs 52%), and cows that had fully activated patches and partially activated patches had greater conception rates compared to animals that had not exhibited estrus (P < 0.01; 69%, 65%, and 45%). There was no semen type by estrus expression interaction (P = 0.24). Conception rates tended to be greater for conventional semen among animals that had activated patches (P = 0.06; 73% vs 65%) and partially activated patches (P = 0.06; 72% vs 59%). Conception rates were greater for conventional semen (P < 0.01; 56% vs 33%) among animals that did not exhibit estrus. There was no effect of dam age (P = 0.40) or sire (P = 0.92) on conception rates. In conclusion, Sexcel™ gender-ablated semen can successfully be used in fixed-time AI protocols among animals that exhibit estrus, but caution should be used among animals that do not exhibit estrus.

Genome-Enabled Prediction of Breeding Values for Feedlot Average Daily Weight Gain in Nelore Cattle.

Nelore is the most economically important cattle breed in Brazil, and the use of genetically improved animals has contributed to increased beef production efficiency. The Brazilian beef feedlot industry has grown considerably in the last decade, so the selection of animals with higher growth rates on feedlot has become quite important. Genomic selection (GS) could be used to reduce generation intervals and improve the rate of genetic gains. The aim of this study was to evaluate the prediction of genomic-estimated breeding values (GEBV) for average daily weight gain (ADG) in 718 feedlot-finished Nelore steers. Analyses of three Bayesian model specifications [Bayesian GBLUP (BGBLUP), BayesA, and BayesCπ] were performed with four genotype panels [Illumina BovineHD BeadChip, TagSNPs, and GeneSeek High- and Low-density indicus (HDi and LDi, respectively)]. Estimates of Pearson correlations, regression coefficients, and mean squared errors were used to assess accuracy and bias of predictions. Overall, the BayesCπ model resulted in less biased predictions. Accuracies ranged from 0.18 to 0.27, which are reasonable values given the heritability estimates (from 0.40 to 0.44) and sample size (568 animals in the training population). Furthermore, results from Bos taurus indicus panels were as informative as those from Illumina BovineHD, indicating that they could be used to implement GS at lower costs.

Genomic structure and marker-derived gene networks for growth and meat quality traits of Brazilian Nelore beef cattle.

BACKGROUND: Nelore is the major beef cattle breed in Brazil with more than 130 million heads. Genome-wide association studies (GWAS) are often used to associate markers and genomic regions to growth and meat quality traits that can be used to assist selection programs. An alternative methodology to traditional GWAS that involves the construction of gene network interactions, derived from results of several GWAS is the AWM (Association Weight Matrices)/PCIT (Partial Correlation and Information Theory). With the aim of evaluating the genetic architecture of Brazilian Nelore cattle, we used high-density SNP genotyping data (~770,000 SNP) from 780 Nelore animals comprising 34 half-sibling families derived from highly disseminated and unrelated sires from across Brazil. The AWM/PCIT methodology was employed to evaluate the genes that participate in a series of eight phenotypes related to growth and meat quality obtained from this Nelore sample. RESULTS: Our results indicate a lack of structuring between the individuals studied since principal component analyses were not able to differentiate families by its sires or by its ancestral lineages. The application of the AWM/PCIT methodology revealed a trio of transcription factors (comprising VDR, LHX9 and ZEB1) which in combination connected 66 genes through 359 edges and whose biological functions were inspected, some revealing to participate in biological growth processes in literature searches. CONCLUSIONS: The diversity of the Nelore sample studied is not high enough to differentiate among families neither by sires nor by using the available ancestral lineage information. The gene networks constructed from the AWM/PCIT methodology were a useful alternative in characterizing genes and gene networks that were allegedly influential in growth and meat quality traits in Nelore cattle.

Strategies for genotype imputation in composite beef cattle.

BACKGROUND: Genotype imputation has been used to increase genomic information, allow more animals in genome-wide analyses, and reduce genotyping costs. In Brazilian beef cattle production, many animals are resulting from crossbreeding and such an event may alter linkage disequilibrium patterns. Thus, the challenge is to obtain accurately imputed genotypes in crossbred animals. The objective of this study was to evaluate the best fitting and most accurate imputation strategy on the MA genetic group (the progeny of a Charolais sire mated with crossbred Canchim X Zebu cows) and Canchim cattle. The data set contained 400 animals (born between 1999 and 2005) genotyped with the Illumina BovineHD panel. Imputation accuracy of genotypes from the Illumina-Bovine3K (3K), Illumina-BovineLD (6K), GeneSeek-Genomic-Profiler (GGP) BeefLD (GGP9K), GGP-IndicusLD (GGP20Ki), Illumina-BovineSNP50 (50K), GGP-IndicusHD (GGP75Ki), and GGP-BeefHD (GGP80K) to Illumina-BovineHD (HD) SNP panels were investigated. Seven scenarios for reference and target populations were tested; the animals were grouped according with birth year (S1), genetic groups (S2 and S3), genetic groups and birth year (S4 and S5), gender (S6), and gender and birth year (S7). Analyses were performed using FImpute and BEAGLE software and computation run-time was recorded. Genotype imputation accuracy was measured by concordance rate (CR) and allelic R square (R(2)). RESULTS: The highest imputation accuracy scenario consisted of a reference population with males and females and a target population with young females. Among the SNP panels in the tested scenarios, from the 50K, GGP75Ki and GGP80K were the most adequate to impute to HD in Canchim cattle. FImpute reduced computation run-time to impute genotypes from 20 to 100 times when compared to BEAGLE. CONCLUSION: The genotyping panels possessing at least 50 thousands markers are suitable for genotype imputation to HD with acceptable accuracy. The FImpute algorithm demonstrated a higher efficiency of imputed markers, especially in lower density panels. These considerations may assist to increase genotypic information, reduce genotyping costs, and aid in genomic selection evaluations in crossbred animals.

Genome-wide association for growth traits in Canchim beef cattle.

Studies are being conducted on the applicability of genomic data to improve the accuracy of the selection process in livestock, and genome-wide association studies (GWAS) provide valuable information to enhance the understanding on the genetics of complex traits. The aim of this study was to identify genomic regions and genes that play roles in birth weight (BW), weaning weight adjusted for 210 days of age (WW), and long-yearling weight adjusted for 420 days of age (LYW) in Canchim cattle. GWAS were performed by means of the Generalized Quasi-Likelihood Score (GQLS) method using genotypes from the BovineHD BeadChip and estimated breeding values for BW, WW, and LYW. Data consisted of 285 animals from the Canchim breed and 114 from the MA genetic group (derived from crossings between Charolais sires and ½ Canchim + ½ Zebu dams). After applying a false discovery rate correction at a 10% significance level, a total of 4, 12, and 10 SNPs were significantly associated with BW, WW, and LYW, respectively. These SNPs were surveyed to their corresponding genes or to surrounding genes within a distance of 250 kb. The genes DPP6 (dipeptidyl-peptidase 6) and CLEC3B (C-type lectin domain family 3 member B) were highlighted, considering its functions on the development of the brain and skeletal system, respectively. The GQLS method identified regions on chromosome associated with birth weight, weaning weight, and long-yearling weight in Canchim and MA animals. New candidate regions for body weight traits were detected and some of them have interesting biological functions, of which most have not been previously reported. The observation of QTL reports for body weight traits, covering areas surrounding the genes (SNPs) herein identified provides more evidence for these associations. Future studies targeting these areas could provide further knowledge to uncover the genetic architecture underlying growth traits in Canchim cattle.