On the lipid dependence of bacterial mechanosensitive channel gating in situ.

For bacterial mechanosensitive channels acting as turgor-adjusting osmolyte release valves, membrane tension is the primary stimulus driving opening transitions. Because tension is transmitted through the surrounding lipid bilayer, it is possible that the presence or absence of different lipid species may influence the function of these channels. In this work, we characterize the lipid dependence of chromosome-encoded MscS and MscL in E. coli strains with genetically altered lipid composition. We use two previously generated strains that lack one or two major lipid species (PE, PG, or CL) and engineer a third strain that is highly enriched in CL due to the presence of hyperactive cardiolipin synthase ClsA. We characterize the functional behavior of these channels using patch-clamp and quantify the relative tension midpoints, closing rates, inactivation depth, and the rate of recovery back to the closed state. We also measure the osmotic survival of lipid-deficient strains, which characterizes the functional consequences of lipid-mediated channel function at the cell level. We find that the opening and closing behavior of MscS and MscL tolerate the absence of specific lipid species remarkably well. The lack of cardiolipin (CL), however, reduces the active MscS population relative to MscL and decreases the closing rate, slightly increasing the propensity of MscS toward inactivation and slowing the recovery process. The data points to the robustness of the osmolyte release system and the importance of cardiolipin for the adaptive behavior of MscS.

Polymer-extracted structure of the mechanosensitive channel MscS reveals the role of protein-lipid interactions in the gating cycle.

Membrane protein structure determination is not only technically challenging but is further complicated by the removal or displacement of lipids, which can result in non-native conformations or a strong preference for certain states at the exclusion of others. This is especially applicable to mechanosensitive channels (MSC's) that evolved to gate in response to subtle changes in membrane tension transmitted through the lipid bilayer. E. coli MscS, a model bacterial system, is an ancestral member of the large family of MSCs found across all phyla of walled organisms. As a tension sensor, MscS is very sensitive and highly adaptive; it readily opens under super-threshold tension and closes under no tension, but under lower tensions, it slowly inactivates and can only recover when tension is released. However, existing cryo-EM structures do not explain the entire functional gating cycle of open, closed, and inactivated states. A central question in the field has been the assignment of the frequently observed non-conductive conformation to either a closed or inactivated state. Here, we present a 3 Å MscS structure in native nanodiscs obtained with Glyco-DIBMA polymer extraction, eliminating the lipid removal step that is common to all previous structures. Besides the protein in the non-conductive conformation, we observe well-resolved densities of four endogenous phospholipid molecules intercalating between the lipid-facing and pore-lining helices in preferred orientations. Mutations of positively charged residues coordinating these lipids inhibit MscS inactivation, whereas removal of a negative charge near the lipid-filled crevice increases inactivation. The functional data allows us to assign this class of structures to the inactivated state. This structure reveals preserved lipids in their native locations, and the functional effects of their destabilization illustrate a novel inactivation mechanism based on an uncoupling of the peripheral tension-sensing helices from the gate.

MscS inactivation and recovery are slow voltage-dependent processes sensitive to interactions with lipids.

Mechanosensitive channel MscS, the major bacterial osmolyte release valve, shows a characteristic adaptive behavior. With a sharp onset of activating tension the channel population readily opens, but under prolonged action of moderate tension it inactivates. The inactivated state is non-conductive and tension insensitive, which suggests that the gate becomes uncoupled from the lipid-facing domains. Because the distinct opening and inactivation transitions are both driven from the closed state by tension transmitted through the lipid bilayer, here we explore how mutations of two conserved positively charged lipid anchors, R46 and R74, affect 1) the rates of opening and inactivation and 2) the voltage dependences of these transitions. Previously estimated kinetic rates for opening-closing transitions in wild-type MscS at low voltages were 3-6 orders of magnitude higher than the rates for inactivation and recovery. Here we show that MscS activation exhibits a shallow nearly symmetric dependence on voltage, whereas inactivation is substantially augmented and recovery is slowed down by depolarization. Conversely, hyperpolarization impedes inactivation and speeds up recovery. Mutations of R46 and R74 anchoring the lipid-facing helices to the inner interface to an aromatic residue (W) do not substantially change the activation energy and closing rates, but instead change the kinetics of both inactivation and recovery and essentially eliminate their voltage dependence. Uncharged polar substitutions (S or Q) for these anchors produce functional channels but increase the inactivation and reduce the recovery rates. The data clearly delineate the activation-closing and the inactivation-recovery pathways and strongly suggest that only the latter involves extensive rearrangements of the protein-lipid boundary associated with the uncoupling of the lipid-facing helices from the gate. The discovery that hyperpolarization robustly assists MscS recovery suggests that membrane potential is one of the factors that regulates osmolyte release valves by putting them either on "ready" or "standby" based on the cell's metabolic state.

The dynamic hypoosmotic response of Vibrio cholerae relies on the mechanosensitive channel MscS.

Like other intestinal bacteria, the facultative pathogen Vibrio cholerae adapts to a wide range of osmotic environments. Under drastic osmotic down-shifts, Vibrio avoids mechanical rupture by rapidly releasing excessive metabolites through mechanosensitive (MS) channels that belong to two major types, low-threshold MscS and high-threshold MscL. To investigate each channel individual contribution to V. cholerae osmotic permeability response, we generated individual ΔmscS, ∆mscL, and double ΔmscL ΔmscS mutants in V. cholerae O395 and characterized their tension-dependent activation in patch-clamp experiments, as well as their millisecond-scale osmolyte release kinetics using a stopped-flow light scattering technique. We additionally generated numerical models reflecting the kinetic competition of osmolyte release with water influx. Both mutants lacking MscS exhibited delayed osmolyte release kinetics and decreased osmotic survival rates compared to WT. The ΔmscL mutant showed comparable release kinetics to WT, but a higher osmotic survival, while ΔmscS had low survival, comparable to the double ΔmscL ΔmscS mutant. By analyzing release kinetics following rapid medium dilution, we illustrate the sequence of events and define the set of parameters that characterize discrete phases of the osmotic response. Osmotic survival rates are directly correlated to the extent and duration of cell swelling, the rate of osmolyte release and the onset time, and the completeness of the post-shock membrane resealing. Not only do the two channels interact functionally during the resealing phase, but there is also a compensatory up-regulation of MscS in the ΔmscL strain suggesting some transcriptional crosstalk. The data reveal the advantage of the low-threshold MscS channel in curbing tension surges, without which MscL becomes toxic, and the role of MscS in the proper termination of the osmotic permeability response in Vibrio.

MscS inactivation and recovery are slow voltage-dependent processes sensitive to interactions with lipids.

Mechanosensitive channel MscS, the major bacterial osmolyte release valve, shows a characteristic adaptive behavior. With a sharp onset of activating tension, the channel population readily opens, but under prolonged action of moderate near-threshold tension, it inactivates. The inactivated state is non-conductive and tension-insensitive, which suggests that the gate gets uncoupled from the lipid-facing domains. The kinetic rates for tension-driven opening-closing transitions are 4-6 orders of magnitude higher than the rates for inactivation and recovery. Here we show that inactivation is augmented and recovery is slowed down by depolarization. Hyperpolarization, conversely, impedes inactivation and speeds up recovery. We then address the question of whether protein-lipid interactions may set the rates and influence voltage dependence of inactivation and recovery. Mutations of conserved arginines 46 and 74 anchoring the lipid-facing helices to the inner membrane leaflet to tryptophans do not change the closing transitions, but instead change the kinetics of both inactivation and recovery and essentially eliminate their voltage-dependence. Uncharged polar substitutions (S or Q) for these anchors produce functional channels but increase the inactivation and reduce the recovery rates. The data suggest that it is not the activation and closing transitions, but rather the inactivation and recovery pathways that involve substantial rearrangements of the protein-lipid boundary associated with the separation of the lipid-facing helices from the gate. The discovery that hyperpolarization robustly assists MscS recovery indicates that membrane potential can regulate osmolyte release valves by putting them either on the 'ready' or 'standby' mode depending on the cell's metabolic state.

Mechanosensitive channel MscS is critical for termination of the bacterial hypoosmotic permeability response.

Free-living microorganisms are subjected to drastic changes in osmolarity. To avoid lysis under sudden osmotic down-shock, bacteria quickly expel small metabolites through the tension-activated channels MscL, MscS, and MscK. We examined five chromosomal knockout strains, ∆mscL, ∆mscS, a double knockout ∆mscS ∆mscK, and a triple knockout ∆mscL ∆mscS ∆mscK, in comparison to the wild-type parental strain. Stopped-flow experiments confirmed that both MscS and MscL mediate fast osmolyte release and curb cell swelling, but osmotic viability assays indicated that they are not equivalent. MscS alone was capable of rescuing the cell population, but in some strains, MscL did not rescue and additionally became toxic in the absence of both MscS and MscK. Furthermore, MscS was upregulated in the ∆mscL strain, suggesting either a crosstalk between the two genes/proteins or the influence of cell mechanics on mscS expression. The data shows that for the proper termination of the permeability response, the high-threshold (MscL) and the low-threshold (MscS/MscK) channels must act sequentially. In the absence of low-threshold channels, at the end of the release phase, MscL should stabilize membrane tension at around 10 mN/m. Patch-clamp protocols emulating the tension changes during the release phase indicated that the non-inactivating MscL, residing at its own tension threshold, flickers and produces a protracted leakage. The MscS/MscK population, when present, stays open at this stage to reduce tension below the MscL threshold and silence the large channel. When MscS reaches its own threshold, it inactivates and thus ensures proper termination of the hypoosmotic permeability response. This functional interplay between the high- and low-threshold channels is further supported by the compromised osmotic survival of bacteria expressing non-inactivating MscS mutants.

Mechanosensitive channel MscS is critical for termination of the bacterial hypoosmotic permeability response.

Free-living microorganisms are subjected to drastic changes in osmolarity. To avoid lysis under sudden osmotic down-shock, bacteria quickly expel small metabolites through the tension-activated channels MscL, MscS, and MscK. We examined five chromosomal knockout strains, Δ mscL , Δ mscS , a double knockout Δ mscS Δ mscK , and a triple knockout Δ mscL Δ mscS Δ mscK in comparison to the wild-type parental strain. Stopped-flow experiments confirmed that both MscS and MscL mediate fast osmolyte release and curb cell swelling, but osmotic viability assays indicated that they are not equivalent. MscS alone was capable of rescuing the cell population, but in some strains MscL did not rescue and additionally became toxic in the absence of both MscS and MscK. Furthermore, MscS was upregulated in the Δ mscL strain, suggesting either a cross-talk between the two genes/proteins or the influence of cell mechanics on mscS expression. The data shows that for the proper termination of the permeability response, the high-threshold (MscL) and the low-threshold (MscS/MscK) channels must act sequentially. In the absence of low-threshold channels, at the end of the release phase, MscL should stabilize membrane tension at around 10 mN/m. Patch-clamp protocols emulating the tension changes during the release phase indicated that the non-inactivating MscL, residing at its own tension threshold, flickers and produces a protracted leakage. The MscS/MscK population, when present, stays open at this stage to reduce tension below the MscL threshold and silence the large channel. When MscS reaches its own threshold, it inactivates and thus ensures proper termination of the hypoosmotic permeability response. This functional interplay between the high- and low-threshold channels is further supported by the compromised osmotic survival of bacteria expressing non-inactivating MscS mutants. Summary for the table of contents: The kinetics of hypotonic osmolyte release from E. coli is analyzed in conjunction with bacterial survival. It is shown that MscL, the high-threshold 'emergency release valve', rescues bacteria from down-shocks only in the presence of MscS, MscK or other low-threshold channels that are necessary to pacify MscL at the end of the release phase.