RESUMO
The utilization of Hydroquinone (HQ) in over-the-counter skincare items is subject to restrictions. Consequently, Arbutin (AR) serves as a reliable alternative for addressing hyperpigmentation in non-prescription topical formulations. Nevertheless, AR undergoes decomposition into HQ and p-Benzoquinone (BZ) when exposed to temperature stress, ultraviolet light, or dilution in an acidic environment, all of which can induce skin toxicity. The intention of this paper is to investigate the effect of extraction procedure on the conversion of AR to HQ and or BZ and to evaluate kinetics of AR hydrolysis to HQ. Meanwhile this study aims to evaluate AR and BZ interference with the United States Pharmacopoeia (USP) identification and assessment method for HQ Hydrolytic stress during extraction conditions underwent optimization through systematic screening tests. Subsequent assessment of the residual drug and its degradation products were achieved by HPLC method. The resulting data were meticulously fitted to various kinetic models. To analyze the potential interference of AR in HQ measurement using USP method, the standard concentrations of AR and HQ were analyzed through UV-VIS spectrophotometry. For enhanced certainty, a validated HPLC method analysis was also conducted. Notably, the acid hydrolysis of AR exhibited independence from its initial concentration. So, the hydrolytic degradation of AR exhibited a Zero-order kinetic profile. Furthermore, the proven interference of AR in the UV-VIS spectrophotometry method was identified within the context of the USP method. This study successfully utilized an adopted HPLC method for the concurrent quantification of AR, HQ, and BZ. The potential interference of AR in the UV-VIS spectrophotometric assay for HQ may lead to false results especially for regulatory purposes.
Assuntos
Arbutina , Benzoquinonas , Hidroquinonas , Hiperpigmentação , Arbutina/análise , Arbutina/química , Hidroquinonas/análise , Hidroquinonas/química , Benzoquinonas/química , Benzoquinonas/análise , Cromatografia Líquida de Alta Pressão/métodos , Hidrólise , Preparações Clareadoras de Pele/química , Preparações Clareadoras de Pele/análise , Cinética , Administração Tópica , Espectrofotometria Ultravioleta/métodosRESUMO
BACKGROUND: The emulgel, a novel drug delivery system, merges emulsion and gel, offering advantages like enhanced stability, precise control over drug release kinetics, and increased drug absorption compared to emulsions alone. Kojic acid (KA) demonstrates potent inhibition of the tyrosinase enzyme, a crucial player in the melanin synthesis pathway. AIMS: The main objective of this experimental study is to formulate KA within an emulgel framework and assess its stability under various environmental conditions. METHODS: One percent of KA emulgel and 1% simple gel, serving as the control product, were supplemented with varying concentrations of sodium metabisulfite (SMBS) for its antioxidant properties. The formulations were segregated into four groups and subjected to diverse maintenance and stress conditions over a three-month period. Monthly evaluations of physicochemical alterations were conducted, initially employing digital photography, followed by the extraction of KA and subsequent quantification of its concentration through high performance liquid chromatography (HPLC). RESULTS: The best formulations for retaining KA among the prepared ones were the 0.25% SMBS KA emulgel and the 0.1% SMBS KA simple gel, capable of retaining 86% and 76% of the initial KA content under stress conditions, respectively (p < 0.0001). CONCLUSIONS: Regarding to this study, ideal storage condition for KA emulgel and simple gel is in the refrigerator temperatures. Moreover, optimal SMBS concentrations for stability enhancement are 0.25% for emulgel and 0.1% for the simple gel. A significant statistical difference was observed between refrigerated emulgel and simple gel in the retention of KA in the presence of optimum concentration of antioxidants (p < 0.0001).
Assuntos
Estabilidade de Medicamentos , Emulsões , Géis , Pironas , Pironas/administração & dosagem , Pironas/farmacocinética , Pironas/farmacologia , Emulsões/química , Antioxidantes/administração & dosagem , Antioxidantes/farmacologia , Hiperpigmentação/tratamento farmacológico , Humanos , Armazenamento de Medicamentos , Sistemas de Liberação de Medicamentos/métodos , Administração Cutânea , Composição de Medicamentos/métodos , Sulfitos/química , Sulfitos/administração & dosagem , Preparações Clareadoras de Pele/administração & dosagem , Preparações Clareadoras de Pele/química , Preparações Clareadoras de Pele/farmacologiaRESUMO
In this study, we developed a spectrophotometry method for the analysis of 5-hydroxymethylfurfuraldehyde (HMF) in pharmaceutical formulations using citrate@Fe3O4 adsorbent. As bare magnetite (Fe3O4) has certain limitations, such as aggregation and oxidation, surface modifications are commonly used to improve its properties. We successfully coated Fe3O4 with sodium citrate to create a magnetic adsorbent for isolating HMF from samples. We confirmed the successful surface coating of Fe3O4 with citrate using Fourier Transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), Zeta potential, and scanning electron microscopy (SEM). The high adsorption capacity of citrate@Fe3O4 is due to the abundance of carboxyl and hydroxyl groups on the surface of the adsorbent, making it ideal for HMF extraction. The HMF concentration was then quantified using spectrophotometry. Citrate@Fe3O4 exhibited a high surface area and strong interaction with HMF. We analyzed the individual influential factors affecting the magnetic solid phase extraction (MSPE) setup. Validation parameters were also provided to confirm the reliability of the method. Under optimal parameters, the method exhibited excellent linearity in the range of 0.05-30.00 µg/ml with the lower limit of quantification (LLOQ) of 0.05 µg/ml. Relative standard deviations (RSD) values for precision were better than 10% and the method's trueness were better than 10%. Recoveries were found to be in the range of 85% to 106%, indicating excellent accuracy and reliability. We used this method to identify and measure HMF in six different dextrose pharmaceutical dosage forms as intravenous injectable solutions and three honey samples.
Assuntos
Furaldeído/análogos & derivados , Nanopartículas de Magnetita , Nanopartículas , Ácido Cítrico , Espectroscopia de Infravermelho com Transformada de Fourier , Reprodutibilidade dos Testes , Preparações Farmacêuticas , Extração em Fase Sólida/métodos , Nanopartículas de Magnetita/química , Adsorção , Limite de DetecçãoRESUMO
This work presents a preparation of new magnetic nanoparticles coated with amorphous carbon and their application in dispersive solid-phase extraction in simultaneous extraction of sixteen polycyclic aromatic hydrocarbons from eyeliner. The extraction procedure was hyphenated with a lower density than water dispersive liquid-liquid microextraction (DLLME) for further preconcentration of the analytes to sensitive determination of them with gas chromatography-flame ionization detection. The magnetic adsorbent was prepared sonically from iron pentacarbonyl and then the nanoparticles were coated by N, S-doped amorphous carbon and the deep eutectic solvent prepared from tetrabutyl ammonium chloride and decanoic acid. The magnetic properties of the nanoparticles were studied by vibrating sample magnetometer. Also, scanning electron microscopy was used to investigate the nanoparticles morphology. The extraction procedure was done by migration of the analytes from eyeliner into a proper aqueous solution and their adsorption onto the nanoparticles. Then, the analytes were eluted and more concentrated by the DLLME approach. After validating the method, acceptable limit of detection and broad linear range were accessed in the ranges of 0.25-0.54 and 1.8-250 ng/g, respectively. Relative standard deviation values were ≤ 7.1% for the repeated analyses in the same day (n = 6) and different days (n = 6). Extraction recovery of the method was in the range of 79-96%. The introduced method was successfully used for the analysis of the PAHs in five eyeliner samples and only two of them were identified in all samples at ng/g level.
RESUMO
Purpose: Kojic acid (KA) a natural metabolite and its dipalmitate ester, kojic acid dipalmitate(Kadp) are both prescribed to treat skin hyperpigmentation. Stress test reveals the intrinsicstability of active ingredients and leads to selection of the suitable formulations. This researchevaluates the comparative stability of KA and its di-palmitate ester under liquid oxidative stress. Methods: The HPLC-UV/PDA method with a C18 column was utilized. Liquid oxidative stresswas induced using hydrogen peroxide (H2O2). Degradation was separately induced for eachdrug, and they were compared to each other. Results: Kadp degraded more rapidly in similar liquid oxidative stress conditions than KA did.The superior degradation model was the first order for both drugs based on the mean percentage error (MPE) values, indicating the dependency of the reaction rate on the initial concentrationof the reactive substance. Ring opening was proposed as the most possible theory for KA andKadp oxidative degradation. Conclusion: It is suggested to use KA instead of Kadp in less stable formulations, such asextemporaneous preparations. The incorporation of antioxidant excipients in Kadp formulationsis recommended for yielding better stability results. Formulating Kadp in the internal phase ofo/w emulsion formulations may protect this susceptive molecule from oxidative degradationduring the shelf life of the pharmaceutical preparation. Further studies are required to study theexact mechanism of the degradation process.
RESUMO
INTRODUCTION: In recent years, argan oil has gained increasing interest in hair care products. In this study, attenuated total reflectance technique was utilized as a fast method and the results were compared to protein loss measurements in order to show the preventive effect of argan oil pre-treatment on excised human hair after oxidative hair damage. METHODS: Hair tresses were divided into three groups: in group-1; they were damaged using oxidant agent solely, in group-2 and 3; hair were pre-treated with argan oil before undergoing the oxidative damage. In group-2, the oil was removed by physical cleaning but in group-3 the oil was removed with a washing procedure. ATR (attenuated total reflectance) spectrum was recorded for different samples. Quantitative studies of protein loss in hair samples were performed by Lowry method. The antioxidant properties of argan oil were also measured in vitro using 2, 2-diphenyl-1-picrylhydrazyl (DPPH) protocol, which determined the ability of the oil to scavenge the DPPH free radicals. RESULTS: The amount of protein loss with oil pre-treated groups was reduced significantly. The ATR spectrum showed oil deposition on hair even after washing. Four distinctive ATR peaks were changed during oxidation. The changes in peak height values were linear. The antioxidant property measured with DPPH method led to a IC50 value of 59 µg/ml. CONCLUSION: Argan oil pre-treatment was effective in protecting hair against oxidative damage. ATR outcomes were in accordance with protein loss results. In this study, the ATR testing method as a fast technique was used efficiently in quantification of hair damage.
Assuntos
Antioxidantes , Óleos de Plantas , Humanos , Antioxidantes/farmacologia , Óleos de Plantas/farmacologia , Estresse Oxidativo , CabeloRESUMO
BACKGROUND: Cocoa butter (CB), an expensive product containing a specific triacylglycerol (TAG)composition, is often the object of economic adulteration. OBJECTIVE: The present study investigates the detection and quantification of cocoa butter substitutes (CBS) using differential scanning calorimetry. METHOD: CBS was mixed with CB (from 0 to 100%) as standard samples and analyzed using differential scanning calorimetry and gas chromatography to evaluate the thermal characteristics and fatty acid composition respectively. RESULTS: Increasing the ratio of CBS/CB changed the thermal parameters and fatty acid profiles significantly. For quantification of CBS in commercial samples, medium melting fraction temperature (TMMFvia r2 = 0.922) and melting enthalpy (ΔHfvia r2 = 0.972) were successfully used to quantify the value of CBS in the samples suspected of being fraudulent. According to the results, all of the thermal parameters increased significantly (P < 0.05) with increasing ratio of CBS/CB. It can be attributed to the presence of saturated fatty acids (C12-C22) in CBS which increases TLMF. CONCLUSIONS: The promising results of the present study could be used as a tool for the fast identification of adulteration and quantification of CBS in chocolate compositions. HIGHLIGHTS: Differential scanning calorimetry methods has been developed for identification of CB adulteration. CBS adulteration was detected in CB and also in commercial chocolate samples.
Assuntos
Cacau , Chocolate , Varredura Diferencial de Calorimetria , Gorduras na Dieta/análise , Ácidos Graxos , Irã (Geográfico)RESUMO
Sodium valproate, the most common solid form of valproic acid, is highly hygroscopic and carbamazepine has extremely low aqueous solubility. Producing a salt form of valproic acid with tromethamine and a cocrystal form of valproic acid with carbamazepine have been studied as two approaches to improve physicochemical properties of the intended drugs. Characterization methods including differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD) and Fourier transform infrared spectroscopy (FTIR) are applied to characterize the synthesized salt and cocrystal. The stability of sodium valproate and tromethamine valproate were examined in 33, 53, 75 and 100 percent of relative humidity. The dissolution profile studies were performed in phosphate buffer media (pH = 6.8) for carbamazepine (a low soluble drug) and carbamazepine-valprocic acid cocrystal. Tromethamine valproate was physically more stable than sodium valproate in exposure to humidity. Carbamazepine-valproic acid cocrystal did not show an extreme improvement in dissolution profile when compared with carbamazepine, however after 24 hcocrystal was more soluble.
Assuntos
Trometamina , Ácido Valproico , Varredura Diferencial de Calorimetria , Carbamazepina/química , Cristalização/métodos , Estabilidade de Medicamentos , Solubilidade , Espectroscopia de Infravermelho com Transformada de Fourier , Molhabilidade , Difração de Raios XRESUMO
OBJECTIVES: Antioxidant containing cosmeceuticals are commonly prescribed products in treating wrinkles and revitalizing the skin. The aim of this study was the comparative evaluation of physicochemical stability and clinical anti-wrinkle efficacy of transdermal emulgel preparations of sodium ascorbyl phosphate (SAP) and ascorbic acid (AA) on human volunteers. METHODS: Emulgel preparations containing 5% of (SAP) and or (AA) were prepared. HPLC analysis was performed for stability evaluations. Clinical anti-wrinkle efficacy of the formulations was examined on human healthy volunteers in crow's feet area. Elasticity and digital images were recorded before and after treatment. RESULTS: Formulations with added antioxidants and kept in the refrigerator exhibited better stability characteristics. Two-sided blind study and placebo-controlled study showed that both actives were effective in wrinkles depth reduction and also elasticity enhancement but statistically significant difference in the efficacy of the products was not observed. CONCLUSION: Formulations containing (AA) and or (SAP) both improved elasticity and wrinkles of the skin almost by the same extent, and it is necessary to add antioxidant stabilizing agents to both preparations to reach a desired stability.
Assuntos
Envelhecimento da Pele , Administração Cutânea , Ácido Ascórbico/análogos & derivados , Voluntários Saudáveis , HumanosRESUMO
Purpose: Evaluation of drug-excipients compatibility is an important stage during preformulation studies. In the present research, differential scanning calorimetry (DSC) at different heating rates (2.5, 10, 15°C/min) was applied for the kinetic evaluation of fluvoxamine (FLM), sertraline (SER) and doxepin (DOX) binary mixtures with lactose. Methods: Solid state kinetic parameters of the mixtures were calculated using two different thermal methods including ASTM E698 and Starink and the effect of amine type (pKa value) was investigated based on the calculated activation energies. Results: Based on obtained results mean activation energy calculated for FLM, SER and DOX with lactose using ASTM E698 and Starink methods are equal to 335.23, 132.02 and 270.99 kJ/ mol respectively. Conclusion: Results showed that the probability of drug-lactose interaction is higher in the SERlactose mixture in comparison with other two antidepressant drugs which is consistent with their pKa values.
RESUMO
Purpose: Assessment of drug substance and excipients compatibility is an important issue during pre-formulation studies as well as the quality control of pharmaceutical dosage forms. In this study, potential incompatibility between methyldopa and reducing excipients was evaluated using physicochemical methods. Methods: Dextrose and lactose (anhydrous & monohydrate) were selected as reducing carbohydrates. The initial incompatibility was studied with DSC and FTIR on binary mixtures with 1:1 mass ratio. Results were confirmed using HPLC studies coupled with mass spectrometry. Results: The DSC curves indicated the elimination of the melting endotherm of methyldopa in the binary mixtures. A new peak at 1719 cm-1 was observed in the FTIR spectra that can be attributed to the loss of type one amine functionality. The m/z of the proposed compound was observed in the mass spectra. Conclusion: The potential incompatibility of Methyldopa with reducing carbohydrates was established using physicochemical methods.
RESUMO
BACKGROUND: Polyquaterniums (PQs) as important ingredients of hair products are synthetic cationic polymers and are used in commercial hair volumizers and conditioners. METHODS: Three different grades of polymers including PQ 87, 68, and 46 with various concentrations were used, and their hair deposition efficacy was measured at 5 different pH values using hair diameters measurements by digital micrometer. Deposition durability of polymer layer on the hair surface was tested by a defined washing test. Optical microscopic images and polarized light images were also taken from treated and untreated samples for further investigation. Attenuated total reflectance (ATR) spectral were recorded from hair samples to prove the polymer deposition and probable interaction with hair fibers. RESULTS: PQ-68 with the highest molecular weight (300 kDa) at pH = 9 exhibited the best hair deposition efficacy. The results revealed that the deposition of polymers is directly proportional to the pH values. The best results were seen at pH = 9, and at the lowest pH (pH = 5), the efficiency of polymers was approximately equal to zero. The best resistance against washing was shown by PQ-44 at pH = 6. ATR successfully tracked the presence of the polymers on the hair fibers and also proposed specific wave numbers for each polymeric agent, individually. CONCLUSIONS: In general, two main parameter which can mainly influence the deposition efficacy of PQs are the type of polymer or its molecular weight and also the positive charge density on the polymer molecules.
Assuntos
Preparações para Cabelo/farmacologia , Cabelo/efeitos dos fármacos , Polímeros/farmacologia , Compostos de Amônio Quaternário/farmacologia , Feminino , Cabelo/patologia , Humanos , Peso Molecular , Técnicas de Cultura de TecidosRESUMO
In the present study the physicochemical stability of sertraline with lactose was evaluated in drug-excipient binary mixtures. Different physicochemical methods such as differential scanning calorimetry (DSC), Fourier-transform infrared spectroscopy, and mass spectrometry were applied to confirm the incompatibility. The final aim of this study was to evaluate the kinetic parameters using a fast and sensitive DSC method. Solid-state kinetic parameters were derived from nonisothermally stressed physical mixtures using different thermal models such as Friedman, Flynn-Wall-Ozawa, and Kissinger-Akahira-Sunose. Overall, the instability of sertraline with lactose was successfully evaluated. Further confirmation was made by tracking the Maillard reaction product of sertraline and lactose by mass spectrometry. DSC scans provided important information about the stability of sertraline in solid-state condition and also revealed the related thermokinetic parameters in order to understand the nature of the chemical instability.
Assuntos
Lactose/química , Sertralina/química , Varredura Diferencial de Calorimetria , Fenômenos Químicos , Química Farmacêutica , Estabilidade de Medicamentos , Excipientes , Cinética , Espectroscopia de Infravermelho com Transformada de Fourier , TemperaturaRESUMO
Purpose: In the present study the incompatibility of FLM (fluvoxamine) with lactose in solid state mixtures was investigated. The compatibility was evaluated using different physicochemical methods such as differential scanning calorimetry (DSC), Fourier-transform infrared (FTIR) spectroscopy and mass spectrometry. Methods: Non-Isothermally stressed physical mixtures were used to calculate the solid-state kinetic parameters. Different thermal models such as Friedman, Flynn-Wall-Ozawa (FWO) and Kissinger-Akahira-Sunose (KAS) were used for the characterization of the drug-excipient interaction. Results: Overall, the incompatibility of FLM with lactose as a reducing carbohydrate was successfully evaluated and the activation energy of this interaction was calculated. Conclusion: In this research the lactose and FLM Maillard interaction was proved using physicochemical techniques including DSC and FTIR. It was shown that DSC- based kinetic analysis provides fast and versatile kinetic comparison of Arrhenius activation energies for different pharmaceutical samples.
RESUMO
ABSTRACT The Maillard reaction of hydrochlorothiazide (HCTZ) and lactose has been previously demonstrated in pharmaceutical formulations. In this study, the activation energy of - hydrohlorothiazide and lactose interaction in the liquid state was ascertained under basic and neutral conditions. Conventional isothermal High Performance Liquid Chromatography (HPLC) technique was employed to ascertain the kinetic parameters using Arrhenius method. Results: The activation energy obtained was 82.43 and 100.28 kJ/mol under basic and neutral conditions, respectively. Consequently, it can be inferred that Maillard reaction is significantly affected by pH, which can be used as a control factor whenever the reaction potentially occurs.
Assuntos
Cinética , Hidroclorotiazida/análise , Lactose/análise , Preparações Farmacêuticas/classificação , Reação de Maillard , Cromatografia Líquida de Alta Pressão/métodosRESUMO
In this study the stability of parenteral acyclovir (ACV) when diluted in dextrose (DEX) as large volume intravenous fluid preparation (LVIF) was evaluated and the possible Maillard reaction adducts were monitored in the recommended infusion time. Different physicochemical methods were used to evaluate the Maillard reaction of dextrose with ACV to track the reaction in real infusion condition. Other large volume intravenous fluids were checked regarding the diluted drug stability profile. Differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), and mass data proved the reaction of glucose with dextrose. A Maillard-specific high performance liquid chromatography (HPLC) method was used to track the reaction in real infusion condition in vitro. The nucleophilic reaction occurred in diluted parenteral preparations of acyclovir in 5% dextrose solutions. The best diluent solution was also selected as sodium chloride and introduced based on drug stability and also its adsorption onto different infusion sets (PVC or non PVC) to provide an acceptable administration protocol in clinical practices. Although, the Maillard reaction was proved and successfully tracked in diluted solutions, and the level of drug loss when diluted in dextrose was reported to be between 0.27 up to 1.03% of the initial content. There was no drug adsorption to common infusion sets. The best diluent for parenteral acyclovir is sodium chloride large volume intravenous fluid.
Assuntos
Aciclovir/química , Glucose/química , Soluções Farmacêuticas/química , Adsorção , Varredura Diferencial de Calorimetria/métodos , Cromatografia Líquida de Alta Pressão/métodos , Estabilidade de Medicamentos , Excipientes/química , Concentração de Íons de Hidrogênio , Técnicas de Diluição do Indicador , Infusões Parenterais/métodos , Reação de Maillard , Cloreto de Sódio/químicaRESUMO
This study involved the preparation and evaluation of buccal-mucoadhesive microparticles/discs of bethamethasone disodium phosphate (BDSP). The microparticles were prepared using the emulsion solvent diffusion method. Microparticles were prepared and characterized by encapsulation efficiency particle size, Fourier Transform Infra Red (FTIR) spectrums, Differential Scanning Calorimetric (DSC) thermograms and mucoadhesive properties. FTIR studies reported that BDSP was changed to bethamethasone base molecule inside the intact microparticles. The best drug to polymers ratio in microparticles was F1 containing 50 mg drug, 50 mg HPMC (as non-ionic and hydrophilic polymer) and 50 mg carbomer 934p (an anionic mucoadhesive polymer). The production yield of F1 microparticles was calculated as 78.60% with loading efficiency of about 65.14% and the mean particle size was also measured as 281.84 µm. It was proposed that during the microparticle preparation procedure, water soluble salt of the drug may be converted to the base which could be more effective in the buccal mucosa due to its higher partition coefficient and lipophilicity. The highest and lowest releases resulted from the discs prepared from F1 and F4, respectively, compared with the commercial tablet and untreated drug powder (p < 0.05). The data revealed that the discs exhibited good percentage of mucoadhesion (F1, 326 g/cm2). It may be concluded that drug loaded buccal-mucoadhesive microparticles are a suitable delivery system for BDSP, and may be used in the effective management of lichen planus.
Assuntos
Adesivos/administração & dosagem , Adesivos/química , Betametasona/administração & dosagem , Betametasona/química , Líquen Plano Bucal/tratamento farmacológico , Mucosa Bucal/metabolismo , Animais , Química Farmacêutica/métodos , Sistemas de Liberação de Medicamentos/métodos , Masculino , Microesferas , Tamanho da Partícula , Polímeros/química , Ratos , Ratos Wistar , Solubilidade , Comprimidos/administração & dosagem , Comprimidos/químicaRESUMO
One of the most significant issues in pharmaceutical industries, prior to commercialization of a pharmaceutical preparation is the "preformulation" stage. However, far too attention has been paid to verification of the software assisted statistical designs in preformulation studies. The main aim of this study was to report a step by step preformulation approach for a semisolid preparation based on a statistical mixture design and to verify the predictions made by the software with an in-vitro efficacy bioassay test. Extreme vertices mixture design (4 factors, 4 levels) was applied for preformulation of a semisolid Povidone Iodine preparation as Water removable ointment using different PolyEthylenGlycoles. Software Assisted (Minitab) analysis was then performed using four practically assessed response values including; Available iodine, viscosity (N index and yield value) and water absorption capacity. Subsequently mixture analysis was performed and finally, an optimized formulation was proposed. The efficacy of this formulation was bio-assayed using microbial tests in-vitro and MIC values were calculated for Escherichia coli, pseudomonaaeruginosa, staphylococcus aureus and Candida albicans. Results indicated the acceptable conformity of the measured responses. Thus, it can be concluded that the proposed design had an adequate power to predict the responses in practice. Stability studies, proved no significant change during the one year study for the optimized formulation. Efficacy was eligible on all tested species and in the case of staphylococcus aureus; the prepared semisolid formulation was even more effective.
RESUMO
PURPOSE: In this research the effect of vitamin B1 and B6 on cyanocobalamin stability in commercial light protected parenteral formulations and upon adding stabilizing agents will be investigated and best formulation composition and proper storage condition will be introduced. METHODS: In this research some additives such as co solvents and tonicity adjusters, surfactants, antioxidants and chelating agents as well as buffer solutions, were used to improve the stability of the parenteral mixed formulations of B12 in the presence of other B vitamins (B1 and B6). Screening tests and accelerated stability tests were performed according to ICH guidelines Q1A (R2). RESULTS: Shelf life evaluation revealed the best formulation and the proper storage condition. The results indicated the first kinetic models for all tested formulations and the optimum pH value was determined to be 5.8. There was no evidence of B12 loss when mixed with B1 and B6 in a medical syringe at room temperature for maximum of 8 hours. CONCLUSION: It is necessary to formulate vitamin B12 mixed parenteral solutions using proper phosphate buffers (pH=5.8) and to indicate "Store in refrigerator" on the mixed parenteral formulations of vitamin B12 with other B vitamins, which has not been expressed on the label of tested Brand formulations at the time of this study.
RESUMO
PURPOSE: This study was aimed to design Objective Structured Field Examination (OSFE) and also standardize the course plan of community pharmacy clerkship at Pharmacy Faculty of Tabriz University of Medical Sciences (Iran). METHODS: The study was composed of several stages including; evaluation of the old program, standardization and implementation of the new course plan, design and implementation of OSFE, and finally results evaluation. RESULTS: Lack of a fair final assessment protocol and proper organized educating system in various fields of community pharmacy clerkship skills were assigned as the main weaknesses of the old program. Educational priorities were determined and student's feedback was assessed to design the new curriculum consisting of sessions to fulfill a 60-hour training course. More than 70% of the students were satisfied and successfulness and efficiency of the new clerkship program was significantly greater than the old program (P<0.05). In addition, they believed that OSFE was a suitable testing method. CONCLUSION: The defined course plan was successfully improved different skills of the students and OSFE was concluded as a proper performance based assessment method. This is easily adoptable by pharmacy faculties to improve the educational outcomes of the clerkship course.