RESUMO
BACKGROUND: In especially, low and middle-income nations (LMICs), where healthcare access may be restricted, high blood pressure (BP) is a major risk factor for cardiovascular disease and stroke, both of which can even lead to death. Altering one's lifestyle, in conjunction with medical therapy, has been demonstrated to be effective in lowering BP. Recent research has shown that physical activity (PA), in a variety of guises and to varying degrees, can be an effective means of lowering BP. OBJECTIVE: The purpose of this meta-analysis and systematic review was to evaluate the impact that PA plays in the development of hypertension in LMICs nations. METHODS: An exhaustive search of the available research was carried out in order to locate studies that were pertinent. We searched a number of online databases, such as SCOPUS, Medline, and Web of Science, looking for clinical trials that were published before March of 2023. Studies were only considered for inclusion if they were randomized controlled trials (RCTs), reported on the association between PA and BP, and were carried out in LMICs countries. RESULTS: This meta-analysis incorporated a comprehensive collection of 60 studies, encompassing a total of 11,002 people, consisting of 5,630 cases and 5372 controls. The findings indicate that engaging in PA had a notable impact on decreasing systolic blood pressure (SBP), as seen by a weighted mean difference (WMD) of -7.70 mmHg, with a 95% confidence interval (CI) ranging from -9.50 to -5.91 (p < 0.001). Additionally, PA was found to have a significant influence on reducing diastolic blood pressure (DBP), as indicated by a WMD of -3.60 mmHg, with a 95% CI ranging from -4.48to -2.73(p < 0.001). The findings from subgroup analysis indicate that the observed results remained statistically significant when considering individuals with baseline SBP of 120 mmHg or lower and DBP of 80 mmHg or lower. CONCLUSION: The incorporation of PA can significantly contribute to the mitigation of high BP within LMICs nations. Additional investigation is required to ascertain the most effective form and amount of PA in order to mitigate BP levels within these specific individuals.
RESUMO
INTRODUCTION: The fat distribution in the body determines the risk of cardiometabolic problems such as heart disease and diabetes. Some dietary supplements, such as selenium and zinc, possess lipolytic and anti-angiogenic functions, which may be a useful strategy in reducing the risk of cardiometabolic complications. This study evaluated the effect of zinc (Zn), selenium (Se), and their combined supplementation on cardiometabolic risk factors in male Wistar rats in two nutritional models, including caloric restriction (CR) and high-fat diet (HFD). METHODS AND MATERIALS: The 48 male Wistar rats were divided into three diet groups (HFD and CR and normal diet (ND)). The HFD group was subdivided into four groups (N=8 rats in each group) that received (HFD+Se), (HFD+Zn), (HFD+Zn+Se), and HFD alone as the control group, respectively. After 8 weeks of intervention, biochemical tests were performed on serum levels, including measurement of lipid profile (triglyceride, Cholesterol, LDL and HDL) and glycemic indices (fasting blood sugar, insulin and insulin sensitivity markers). RESULTS: The results showed that supplementation significantly improved the lipid profile (P <0.001). A comparison of glucose homeostasis indices in the study groups also showed a significant difference. The serum level of glucose was higher in the HFD group than in the intervention groups (P <0.001). Also, the rate of improvement of lipid profile and glycemic indexes in the group receiving the combination of two supplements showed a better trend than those receiving zinc and selenium alone. However, the values were statistically significant only for glucose homeostasis indices (P <0.001). CONCLUSION: Although obesity is a multifactorial condition, controlling other risk factors, zinc and selenium and their combined supplementation can lead to promising solutions for the treatment of obesity-induced glucose and lipid homeostasis disorders.
RESUMO
BACKGROUND: Zinc deficiency is one of the most important micronutrient deficiencies in children that can affect the children's growth pattern. In this regard, different studies were conducted to assess the effect of zinc supplementation on growth patterns in healthy children. To the best of our knowledge, no systematic review has summarized the results of these studies. So, in the present study, we systematically reviewed the result of the studies that assessed the effect of zinc supplementation on anthropometric parameters in healthy, over 2-year-old children. METHODS: A systematic search was carried out in PubMed, Scopus, and Web of Science from inception to November 2021. Data were pooled using the random-effects method and were expressed as weighted mean difference (WMD) and 95% confidence intervals (CI). RESULTS: The pooled results of eight studies, including 1586 participants, showed that zinc supplementation significantly increases height [(WMD): 0.9, 95% CI: (0.27, 1.52), p < 0.001], weight [(WMD): 0.51, 95% CI: (0.06, 0.97), p < 0.001], height for age (HAZ) [(WMD): 0.07, 95% CI: (0.03, 0.10), p < 0.001]. Also, meta-regression analysis did not reveal any significant association between dose and duration of intervention and anthropometric parameters. CONCLUSION: The present study demonstrates the beneficial effects of zinc supplementation on weight, height, and HAZ.
Assuntos
Desnutrição , Zinco , Humanos , Pré-Escolar , Antropometria , Nível de Saúde , Suplementos NutricionaisRESUMO
As a special review article, several significant and applied results in 3D printing and additive manufacturing (AM) science and technology are reviewed and studied. Which, the reviewed research works were published in 2020. Then, we would have another review article for 2021 and 2022. The main purpose is to collect new and applied research results as a useful package for researchers. Nowadays, AM is an extremely discussed topic and subject in scientific and industrial societies, as well as a new vision of the unknown modern world. Also, the future of AM materials is toward fundamental changes. Which, AM would be an ongoing new industrial revolution in the digital world. With parallel methods and similar technologies, considerable developments have been made in 4D in recent years. AM as a tool is related to the 4th industrial revolution. So, AM and 3D printing are moving towards the fifth industrial revolution. In addition, a study on AM is vital for generating the next developments, which are beneficial for human beings and life. Thus, this article presents the brief, updated, and applied methods and results published in 2020.
RESUMO
Cancer is the second leading cause of death in the world. Reports on the effect of Trimethylamine-N-oxide (TAMO), a small amine oxide generated by gut microbial metabolism of choline, betaine, and carnitine, on cancer are inconsistent. Therefore, this systematic review and meta-analysis summarize the effect of TAMO on cancer incidence. A systematic search was conducted in PubMed, Scopus, Web of Science, and Embase. Data were pooled using the random-effects method and were expressed as weighted mean difference (WMD) and 95% confidence intervals (CI). The pooled results of 16 studies, including 5930 participants, showed that the association between TMAO levels and cancer incidence is insignificant (Odds Ratio: 0.97, 95% CI: (0.64, 1.46), P-value = 0.871). Subgroup analysis showed that urinary TMAO levels were negatively associated with cancer incidence; in contrast, a direct and positive association was observed between serum TMAO levels and cancer incidence. However, "gender" and the "TMAO measuring method" were the potential sources of discrepancies. Meta-regression analysis did not reveal any significant association between duration of studies, age, female ratio, subjects-control, and subjects-case. The present study demonstrates that serum TAMO levels were insignificantly associated with cancer incidence.
Assuntos
Betaína , Neoplasias , Humanos , Feminino , Fatores de Risco , Colina/metabolismo , Neoplasias/epidemiologiaRESUMO
OBJECTIVE: Accumulating evidence has been reported regarding the effect of dietary antioxidants on clinical variables in IBD patients, however, findings are controversial. This systematic review and meta-analysis aimed to investigate effect of dietary antioxidants on clinical variables in patients with IBD or its subtypes. METHODS: We searched PubMed, Scopus, and ISI Web of Science from inception to January 2021 using relevant keywords. Data were pooled by using the random-effect model. All statistical analyses were done using STATA version 14. RESULTS: Our meta-analysis was exclusively done on studies about the effect of curcumin on IBD patients, because limited studies were done on other antioxidants. Curcumin administration resulted in significant increment of clinical remission in patients with IBD (SMD: 0.86%, 95% CI: 0.16, 1.56, p = 0.016), significant remission in clinical symptoms (SMD: -0.96 score, 95% CI: -1.34, -0.57, p < 0.001), and significant increment in endoscopic remission in IBD patients (SMD: 0.51%, 95% CI: 0.16, 0.85, p = 0.004), comparing to control group. Curcumin supplementation also made better clinical response than control group (SMD: 0.74%, 95% CI: 0.22, 1.26, p = 0.005) and also resulted in significant improvement in quality of life of patients with IBD, as compared to control group (SMD: 1.23 score, 95% CI: 0.72, 1.74, p < 0.001). CONCLUSIONS: Our meta-analysis showed that curcumin significantly improved clinical and endoscopic remissions in IBD patients. This supplementation also caused significant reduction in clinical symptoms of IBD patients along with better clinical response and the increased quality of life. Further researches with larger sample size and longer period of intervention are required to evaluate efficacy of dietary antioxidants on clinical variables in patients with IBD.
Assuntos
Curcumina , Doenças Inflamatórias Intestinais , Antioxidantes/uso terapêutico , Doença Crônica , Curcumina/uso terapêutico , Humanos , Doenças Inflamatórias Intestinais/tratamento farmacológico , Qualidade de VidaRESUMO
In this research article, a mini-review study is performed on the additive manufacturing (AM) of the polymeric matrix composites (PMCs) and nanocomposites. In this regard, some methods for manufacturing and important and applied results are briefly introduced and presented. AM of polymeric matrix composites and nanocomposites has attracted great attention and is emerging as it can make extensively customized parts with appreciably modified and improved mechanical properties compared to the unreinforced polymer materials. However, some matters must be addressed containing reduced bonding of reinforcement and matrix, the slip between reinforcement and matrix, lower creep strength, void configurations, high-speed crack propagation, obstruction because of filler inclusion, enhanced curing time, simulation and modeling, and the cost of manufacturing. In this review, some selected and significant results regarding AM or three-dimensional (3D) printing of polymeric matrix composites and nanocomposites are summarized and discuss. In addition, this article discusses the difficulties in preparing composite feedstock filaments and printing issues with nanocomposites and short and continuous fiber composites. It is discussed how to print various thermoplastic composites ranging from amorphous to crystalline polymers. In addition, the analytical and numerical models used for simulating AM, including the Fused deposition modeling (FDM) printing process and estimating the mechanical properties of printed parts, are explained in detail. Particle, fiber, and nanomaterial-reinforced polymer composites are highlighted for their performance. Finally, key limitations are identified in order to stimulate further 3D printing research in the future.
RESUMO
BACKGROUND: The aim of this study, we have compared the advantages of oral dydrogestrone with vaginal progesterone (cyclogest) for luteal support in intrauterine insemination (IUI) cycles. Progesterone supplementation is the first line treatment when luteal phase deficiency (LPD) can reasonably be assumed. OBJECTIVE: This study was conduct to compare the effect of oral dydrogestrone with vaginal Cyclogest on luteal phase support in the IUI cycles. MATERIALS AND METHODS: This prospective, randomized, double blind study was performed in a local infertility center from May 2013 to May 2014. It consisted of 150 infertile women younger than35years old undergoing ovarian stimulation for IUI cycles. They underwent ovarian stimulation with oral dydrogesterone (20 mg) as group A and vaginal cyclogest (400 mg) as group B in preparation for the IUI cycles. Clinical pregnancy and abortion rates, mid luteal progesterone (7daysafter IUI) and patient satisfaction were compared between two groups. RESULTS: The mean serum progesterone levels was significantly higher in group A in comparison with group B (p=0.001). Pregnancy rates in group A was not statistically different in comparison with group B (p =0.58). Abortion rate in two groups was not statistically different (p =0.056) although rate of abortion was higher in group B in comparison with A group. Satisfaction rates were significantly higher in group A compared to group B (p<0.001). CONCLUSION: We concluded that oral dydrogestrone is effective as vaginal progesterone for luteal-phase support in woman undergoing IUI cycles. Moreover, the mean serum progesterone levels and satisfaction rates in dydrogestrone group were higher than cyclogest group.